👉With each day it grows a noticeable amount. Its staying short and the leaves are actually touching the media on the lower set. Its actually on its 3rd node, and i will probably top it on the 4rth. I lowered the light from 36 to 24". This week i will lower it again to 18". The plant is short but its growth is still vigorous enough. under the leaves there is vegitation emerging as well. I like the fact that its staying short, I will probably need every inch of of my tent so the longer its stays short and grows like a bush, the better. 👉Im doing the week 3 nutrient schedule for another week because week 3 is the highest levels of grow nutrient. My EC target is 1.7 and is near the high end of the recommended range. I usually start with 2 gallons and then mix and pH the batch. If the EC is high I then ad pHd/calmag/ArmorSI water to lower the EC to the desired range. Im feeding 1 liter of nutrient solution and the runoff is an average of .6l. I give this 2x a day. The EC is slowly creeps up over 3-4 days and when it gets to 25 to 30+ EC I use a liter of rinse solution before the next fertigation. the rinse solution is same water source as the nutrient mix, (RO water at 5 micro-Siemens from a medical grade RO unit) with Armor SI and Calmag pH's to 5.9. The machine isnt at my house so I mule the water in 6 gallon water carriers. Eventually the plant will be big enough that more solution is needed at each feeding. During the Critical Purple and Hindu grows, the EC would actually never guild up because the plants were absorbing a lot of the nutrients. I will gauge the needed inflow volume of nutrient solution by the amount of run-off. Currently 1 liter is what I determined is the minimum needed to keep the coco wet and buffered. As the plant absorbs more water the drain off will decrease. I will target 20-30% run-off from inflow volume. EC value also determines inflow volume but to save on mixed nutrients I like to precede a feeding with the rinse solution if the EC is too high. 👉I disinfect the water jugs 1 time a week with 1% bleach. I disinfect my nutrient solution dispensing jugs at each batch mixing. My watering can and measuring vessel, I rinse with the H2O2 spray at each use. 👉To help keep the grow clean I have a 1 gallon garden sprayer filled with water and 60ml of H2O2. The recipe is usually just 30ml/gallon, but I wanted it a little stronger. I spray the exterior of my cloth pot once a week to rinse of the build up nutrients and prevent mold, mildew and green fungus. I also use the spray to disinfect the drain trays as I swap them out after a feeding. I have a couple dozen white wash cloths that I use to help clean and dry things. I use fresh wash cloth each day, and keep everything as clean as possible.

Ok brothers and sisters i had a minor drawback regarding to external weather so conditions like ventilation and how much heat generates the lights itself were on check on this week, i peaked with 28°c and 30% humidity, so that explain also the increased ddistance between the lights and the plants , as temperatures are on the rise. Additional height control through some lst and changing positions at ones possibly where the stem and branches lignificated and the support plays no role anymore in order to control the new stems , thus avoid hitting top bulb or side bulb radiation , or ventilators or other plants - food scheme stays on the stimulant side with the exception of barrier as i'm spraying as long as i can during flowering . probably until end of month. on the side note the autoflowering one is a bit behind compared to the others but is not that bad - for now. finishing result should be monitored if density and potency was affected by non optimal photoperiod for that one gal. Kind regards :) .

Week 8! Home stretch now. I'm seeing a few nanners so I'm tempted to pull this week instead of next. Will give them a few days to see how they do with the new reservoir refill and go from there! Lots of crystal build up even if the nanners kick my butt.

Feb 14, 2018: Seems my fears were unfounded, I'm not seeing any spots of mildew and I think in 4 days I would see something if it was there. Water with plain water, just ph'd nothing else added. staked up a couple of the buds, all the other palnts are managing to hold each other up, the fan leaves seem to grow into each other so the canopy is a solid moving mass. When the oscillating fan hits the colas the whole canopy sways slightly. For future grow I plan to have more space between plants, and will need a screen/net to hold everything up. Feb 12,13 2018: Watered with 10ml/Gal Tiger Bloom, 10ml/Gal Big Bloom, 2tsp blackstrap molasses, 1ml Cal-Mag per gallon. Ph'd to 6.5 ish. Lost my SD card so didn't get any photos 2/12, but took some with my phone on day 73, and then found my SD card. High quality photos are back tomorrow mourning. Feb 11, 2018: Had a bit of a freak out, thought i had spotted a couple PM spots forming, think it was just the leaves resinous sticky. After the scare decided to do some major cleanup of old leaves and ALL dead leaves, i know it wont help fight PM, but added a small 6" fan circulating air below canopy. Humidity has been constant due to running a dehumidifier so it stays between 45-50 lights on and off.

7/1/25 Very classic Gelato Shaped nugs. Very very strong gassy nose to her. Large chunky buds. Have no complaints besides struggling with mass leaf death on this plant for some reason and can't seem to figure out why or what to do to fix it. maybe its a genetic sensitive to the heat or the humidity

.

And she is in flower!! 🌷 Let the journey begin!! Blooom baby Let the stretching begin

Looking forward to the last stretch of the pre flower. Im going to add the last scrog in the next day or two. After the week of recovery Ill have a good idea on what Im keeping for the canopy. Will lollipop next Monday~ Ph 6.2 - 6.5 this week. Cut out everything but Micro and Bloom. Will feed this week and next for sure. Will continue feeding/flush depending on progress of trichomes.

Bueno empiezo la 3 semanas día 15, con un unos LEDs rojos que me regalaron marshydro al comprar el fc800 evo , creo que se llama así 😝 es una auténtica bestia, ya no me imagino que pueden hacer los leds rojos, en teoría la luz roja aparte de hacer madurar los frutos, engordar y dar sabor, también ayuda a hacer crecer a los nuevos tallos que están más abajo y reciben menos luz, la luz roja profunda les da energía a esos brotes para que crezcan y busquen la luz blanca... Total.. quiero ver si crecen las ramas que están escondidas... También he añadido CO2 , cada segundo dos burbujas.. no quiero pasarme, porque tanto echar magnesio, me a dado un poco de exceso, lo he corregido echando más agua al depósito, y con la ayuda de CO2 hará que coman más las plantas, y corregiré antes el exceso de magnesio, en teoría jejeejje😅😅 todo en teoría

420 Fastbuds Week 8 Blackberry Auto Hello grow fam hope all had an amazing Thanksgiving. Weekly update for these blackberries. Wow oh wow are they progressing nicely. The smell and color they're producing is out of this world. Completely breathe taking when you open the tent and your eyes are just drawn to them. I'd say they'll be getting the chop in the next upcoming weeks from the looks. I'll start checking trichomes to try and get maybe a 70/30 amber to cloudy out of them. All in all Happy Growing.

Let's remember, in week 6 one of my king's tart had been broken in 2 because of the tension due to my bad LST. This plant grows much taller than the others. I'm trying to lower his height by doing HST. Currently she does not seem to complain about it. I preferred to remove my net this week, to more easily access my plants and water them. I hope the branches will hold I cut a lot of leaf this week. I hear different opinions that say it's beneficial others not... At least it will have the advantage of lowering the humidity. --------------------------------------------------------------------------- - Water: tap water at 300 PPM, I add 0.7G of Hybrid powder and 0.3g of booster PK+ per liter to reach 950PPM and I adjust the PH to 5.8. I watered daily until water drained from the pot (to release nutrients from previous waterings) and I take a 3-4 day watering break to let it dry out before resuming a daily watering schedule. -Daytime temperature: 22-26°C -Night temperature: 20-24°C -Humidity: 50-75% ( Too high but it's hard to lower it... I need advice please contact me if you have :) ) -Lamp: Mars Hydro FC3000. intensity 90% at 35cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 3/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA== Looking for MarsHydro equipment for your crop? 🔥 You can use my promo codes! 🙏😻 "houstone3" for: TS LED Grow Light, Tent, Ventilation for 3% off "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits for 5% off https://www.mars-hydro.com/?acc=hou-stone

Anche queste 3forbidden runtz hanno iniziato la 2° settimana muy bien... Sono al 12°giorno e vengono su benissimo ...... Avanti così belle mie

✌️🎃 Thank you for checking my cultivation. 😋 Finally they're starting to get fat.

Here we are guys in the third week of the journal, last week I had some concern about the ph which was spiking at 7+ overnight but the problem solved it self when the roots started to shoot in to the water. my other concern was the temp inside the grow box which i solved buying a second hand portable ac (40€! such a bargain) now as you can see the girl is thriving and the roots too!! as you can see in the picture i put a white bed sheet around the black container so the water won't get hot, it works AMAZINGLY now the water goes in the hotter day at max 21.2 and than goes back to 20. Day 20 hey guys a small update, yesterday i topped the girl, i have only one concern, the plant is so damn bushy and the lower side shoots are almost covering the shoots on the the side of the topping. looking close i thought that maybe I had to top one set of leaves lower because under the fan leaves she is really really bushing everything is exploding but the plant still quite short, 7cm (2.7 inches) is that ok? apart from this i can't complain, the dwc system is working amazingly and the pland is healthy. please feel free to give suggestion comments or critics love you all I think the plant looks a bit bit pale so as I am writing this i added a 0.5 ml of flora micro to the res to add nitrogen, we will see how she reacts in the next days. In the next days I will top her and start some lst

Hiiii, finaly bought a microscope and I will tell you the results soon. I am afraid that the THCs are gone and have been converted to cbd and cbn. Please see the photos and comment. They also read the following question. Thankful hi, my question: Hi . This was my first cultivation and I put a lot of stress on my plants, so their growth period was very long. I have not flashed the plants yet. I would also like to say that I like the above THC. I look at the trichomes and I think the body is mostly white and transparent with white crowns and very little, maybe two percent amber. Please see the photos. I posted the photos of the three plants. Do you think I missed the peak harvest point? Because 2 weeks ago I tried them and then it was stronger than now and they had more, now they are odorles. Do you think they lost thc? Am I harvesting? I plan to water them tomorrow and leave them in the dark for 3 days. I'm glad to know your opinion.

Ça vas bien ce passer aucun soucis

Stretching is slowing down now. I defoliated reasonably hard 2 weeks ago , now I know I should have gone harder but this is my first time growing this strain. I've got one pheno that's looking like it will be done in the next week or two . I have one pheno that has very few stigma which is something I've only ever seen before on super lemon haze crossed with mimosa evo . You can see them in the video. Keep growing 💚

Loving it