Likes
Comments
Share
@myketb
Follow
Week 1 Day 1 - Clones #1 and #2 are looking alright, not super strong and slight nutrient deficiency issues, but OK. Will just observe for now. - These clones are currently under a very mild CFL light (20 cm away and about 200 ppfd measured roughly by phone app - Tent Buddy.) - Clone #3 still need to be covered to maintain moisture. Yesterday I un-cupped the clone and it wilted a lot. This morning it looks better again after a night of rest under the plastic cup. - I've checked the run off and these clone's pH are so low, while TDS are so high (pH 5.7 and TDS 800pm). This evening, I flushed them with pH 6.5 water and brought the runoff to about pH 6.0 and 350 ppm) Week 1 Day 2 - Just foliage spray with mild CalMag this morning. Soil is still moist, so no watering. Week 1 Day 3 - Just minor watering today. Glad to see the clones are doing well as they are growing a bit everyday. Will transfer them to 3 gallon airpots with new soil mix soon. Week 1 Day 4 - Foliage spray with mild CalMag and Seaweed. Add 5ml of 250 ppm of balanced NPK nutrients AN B52 for each plant. Week 1 Day 5 - Foliage spray with mild CalMag and Seaweed. Transfer them to 3 gallon airpots. Week 1 Day 6 - Foliage spray with mild CalMag and Seaweed. Skip watering. The clones responded OK to the new airpots. Week 1 Day 7 - TBA
Likes
11
Share
@NONSENSE
Follow
Very nice genetic. I'll do same Jack H from Fastbuds for sure again. Plant was very strong and ready for training. I still did not smoked it, will replay later about the taste and power.
Likes
15
Share
Week 0: Germinated her the old-school way...two paper towels, between 2 saucers.. Fastbuds: I was so impressed with the packaging ..even though I was not able to get the original packaging (Discreet).. Week 1: just sprinkled H20 on her.. Midweek she sprouted. Week 2: Added some AgriSil K50 for her root development..She showed her first true leafs like yesterday..
Likes
Comments
Share
@marcian
Follow
Semana #2 La catástrofe. Al llegar a mi casa, encuentro este triste escenario.No cerré bien una de las entradas del indoor y una de mis gatas entraron. Murieron tres plantas.Dos Auto Brooklyn Sunrise y una Xtrem Haze. Sentía que este cultivo tenia que ser desechado por todos los problemas iniciales, pero decidí continuar para ver que tanto pueden aguantar las plantas y por la inversion en estas semillas. Las sovrevivientes se veian un poco torcidas, pero veremos que tal siguen. Por todo esto, a las sobrevivientes (3 Auto Mazar y 2 Xtrem) no les haré ningún tipo de técnica y trataré de abonar con lo mínimo un par de semanas.
Likes
48
Share
July 20: 31 inches with a 16 cola manifold 👍😎. Definitely growing fast and has now pulled ahead of the 16 cola Bruce Banner Fast which is at 30 inches. Hot again today so a bit more water and a couple of mistings with hose water to cool off a bit and provide some humidity. One tomato plant that I realized had a potassium deficiency responded well to a potassium silicate foliar spray. You can learn some cool stuff growing dope. July 24: still growing fast and maybe starting to pre-flower which is fine cuz I’m starting the force flowering in a few days. This is just 12 h of darkness to get this photoperiod to start flowering. Yes, it’s a photoperiod plant from Fast Buds. And it’s awesome. Did another lazy compost tea which is just 5 gallon pail of water that’s sat out overnight to degas, two handfuls of mature compost, some molasses, kelp and Humic Blend, and finally a couple handfuls of shredded coco coir to give the bacteria some where to attach and grow. Leave overnight, maybe stir a couple times, but that’s all. 24-48 h maximum as you don’t want it going anaerobic (and stinky). After tea, she and the other girls got a nice top dressing of barley and Power Bloom with minor amounts of oyster shells (for calcium) and Azomite for trace metals. These are bloom nutrients in anticipation of the start of flowering this weekend. This has been the hottest 90 day period ever here in Edmonton, and lots of other places too.
Likes
79
Share
Today is 3 weeks since Mexican Airlines broke out of the soil to become a seedling. She has really done a lot of cool growth in the time👍. I'm going to try changing up my training methods with this girl. First, I'm only doing one HST bend near the base of the stem (did this on Tuesday). Next, I'm going to try FIM'ing this time, instead of topping. GWE seemed to recommend a FIM pinch one a FIM cut, so that's what I did on Thursday. Last, I'm going to try LST again. If everything goes according to my evil plans, she should be my largest yield to date. 💪 Mexican Airlines is front-center in the group pics.
Processing
Likes
25
Share
Bonjour à tous les padawans et les maîtres jedis Pour cette semaine 4 au jour 23 ma plante fais 17 centimètres et son sixième noeud apparaît je décide donc de pratiquer un LST sur ma plante. Pour ce j'utilise du fil de fer galvanisé que je plante directement dans le substrat en faisant attention de ne pas endommagé les racines car n'oublions pas que ce qui pousse dessus pousse aussi dessous. Jour 17 je pulvérise du une solution composé d'une cuillère à café de savon noir mou dilué dans un litre d'eau en prévention d'éventuels nuisibles. Je corrige mon LST suivant la pousse de ma plante ... Pour ma par c'est la manière dont je procède mais petit rappel de la technique du LST: Quand commencer à appliquer la technique LST De nombreux cultivateurs commencent la manipulation dés que les plantes possèdent entre 3 et 6 nœuds ou une paire de feuilles. Durant cette première étape de la croissance, le tronc encore flexible est pliable sans risque qu’il ne se casse, même si au fur et à mesure du développement de la plante il sera de plus en plus difficile de le plier. Nous pouvons continuer à guider la croissance des branches durant toute la culture, même durant la floraison, ce qui pour cette étape représente un grand avantage face à la taille, qui n’est pas du tout recommandé une fois que la formation des têtes commence, cela stressera en effet la plante, ce qui aura pour effet de retarder la récolte. Comment appliquer la technique de guidage LST Si nous sommes prudents, la flexibilité naturelle des fibres du cannabis permet de plier leur tronc et branches avec une relative facilitée, même durant la floraison des plantes. En utilisant une corde fine, nous pouvons accrocher la pointe de la plante à la base du pot par exemple ou à un tuteur que nous aurons planté dans le substrat. Nous plierons le tronc avec précaution et nous le fixerons avec la corde, à partir de là, nous pouvons augmenter progressivement la tension de la corde, chaque jour un peu plus, jusqu’à obtenir la position souhaitée. Soyez attentif à la réaction de la plante, essayez de ne pas appliquer trop de pression sur la corde et rappelez-vous que la flexibilité des branches peut varier d’une plante à l’autre. Pour obtenir de meilleurs résultats, il suffit de suivre quelques règles simples. Pour commencer, nous devons choisir une corde fine mais pas trop pour ne pas blesser les troncs au fur et à mesure qu’ils grandissent et qu’ils deviennent plus gros. Nous pouvons utiliser des crochets en plastique souple ou de n’importe quelle autre matière flexible pour éviter d’endommager les plantes. Spécialement en intérieur, utiliser des cordons en plastique de couleur (voir les diaries de @Silky) est très pratique pour voir facilement les accroches et faciliter le travail au milieu du réseau formés par les cordes, les tuteurs, les mailles ou les supports que nous aurons dans la culture. Bien entendu, en culture extérieure et surtout en guerilla nous ferons juste le contraire et nous utiliserons des matériaux de couleur qui n’attirent pas l’attention pour que notre jardin reste discret. Pour stresser les plantes au minimum, la mieux est de réaliser ces manipulations le soir ou juste après que les lampes en intérieur s’éteignent, ce qui leur permettra de se remettre durant la nuit. Normalement, le jour suivant nous pourrons observer comme les pointes des branches que nous avons pliées se dressent de nouveau vers le haut à la recherche d’une source de lumière. Je combine un pincage d'Apex au LST cela me permettra d'avoir une canopé plus homogène donc une meilleure pénétration lumineuse et par conséquent un meilleur rendement. Que la force soit avec vous💪
Likes
62
Share
@Chucky324
Follow
Hello. There are 2 rental houses behind our property and I've been concerned in past years about being ripped off. So I thought a baby monitor would give me more of a secure feeling being able to monitor the greenhouse while eating meals and to have it on while I sleep. It has infrared red light for night vision but I don't know how that will affect the plants in the dark if I put right in the grow tent. The plant are growing great and getting heavy already and we still have 5 weeks to go. I found a large bud vertical yesterday when I walked in. So I had to spent a couple of hours tying up the bigger buds. I got 1/2 the table and I will do the other 1/2 today or tomorrow. I sprayed the soil with Spinosad again to get the spores into the soil so they can come in contact any insect larva and latch on and grow. I'm still waiting for the nematodes to arrive. I imagine the Bug Lady is very busy this time of year so it might be a few more weeks before I see them. I haven't seen any powdery mildew in the garden this year so far. These plants are supposed to be mold resistant anyway. We had a hot spell a few weeks ago and a temperature of over 40* C will kill the spores. But it's always good to keep these type of things in the back of your mind so you can be prepared when it happens. Till next week. Chuck.
Likes
6
Share
@PoshGrow
Follow
Welcome to Auto Alaskan Purple Grow by PoshGrow! 🍀 Week #11 2020 October 1st. - 7th. General Info: When planted: 2020 July 23rd. Week: 11 Days: 70 - 77 Last Update Day: 2020 October 6th. Plants: 5 Alaskan Purple Auto. Equipment: Tent: MarsHydro 1mx1mx2m or 39"x39"x72". Light: HLG 260w V2 Rspec QB Kit. Exhaust: 4" 322 CFM fan + Viper Carbon Filter. Intake: 4" 100 CFM Inline Fan. Oscillating Fan: Lower: 4" Ram Fan. Upper: 9" Voxon Box Fan. Humidifier: Taotronics TT-AH001. Dehumidifier: Pavlit MD750. Soil: NPK soil 40% Compost, 50% Peat Moss, 10% Agroperlite. Pot: 7 gallon Fabric Pot x 5pcs. Nutriens: Fox Farm Trio. PH Correcton: Chemoform pH-Minus Granulat. PH Pen: Cheap Chinese one, I callibrate it every time I use it. Water pump: Digital microscope: cheap Chinese USB X4, 1600X. Comment 3 girls went down at week 11, another 2 will be finished in week 12 for sure. Going to put these 2 girls to complete dark for 48h before harvest and compare with other 3 harvested earlier. I will update all digits and harvest dates in harvest week. Stay tuned and happy growing! ✌️
Likes
76
Share
@BB_UK
Follow
Took a while to get there but OMG little note quick! So I started her in a 1 litre pot and stuck her on top of a 1.5L Pepsi bottle with the top chopped off! And she yielded heavily for that amount of soil a whopping! 224.63 wet weight so can’t wait to see what she holds dry because them buds were like boulders! So dense! I will be back to document her dry weight and then a couple of weeks later with the update on the smoke report! But I know it’s going to be so loud! She has deep pungent aromas like gassy and sweet! She’s going to be a powerhouse! She was a little over as today a banana developed but that just tells me “well done” timing just right! She’s a little long for my taste of auto but I do suggest anyone grow her she’s amazing! In the end!
Processing
Likes
26
Share
@GrowGuy97
Follow
Day 49 - Still giving the ladies just PH water with no nutrients trying to see if I can fix whatever is wrong with them😅 All in all the White Widow & Orange Sherbet plants I took individual pictures of are growing great & should have a pretty nice yield! Thank you for following & make sure to check back for daily updates! Happy growing friends!🌱✌️🏼
Likes
6
Share
I really loved the results about topping under 3 knot, we gotta punch muscles in the 2 firts stressing early this little beast. Replanting new critical x orange punch. Suck error burning leafs from gg4 x bp , burned by the sun. Going straight , looking forward to the next.
Likes
18
Share
@Canadian
Follow
I feel sorry for my plans this 2 weeks I haven't been able to look after them properly I've been working long shift with Christmas approaching there's no time for anything so I was pushing in a lot of nutrients into them and I caused a nutrients lockout .I have flush them out with just clean water at the right pH 6.5 and they are responding very well from now on I will continue to Baby them so they gave the best result possible within the circumstances of the plants. Thank you for reading I will continue to update have a happy grow
Likes
2
Share
@PapasGrow
Follow
CBD Compassion Lime Auto 🏥🍋 Your passion, Our Passion, Dutch Passion... 😸 Growing in Mars Hydro tent (3x3) ⛺ with Mars Hydro FC 3000 🚀 She is unfortunately flowering on 12/12 light cycle with photoperiod plants, but despite that she is doing fantastic. Smells like sweet citrus. Moved out of tent for final few weeks. Week 11 ✅
Likes
19
Share
@DrLaggis
Follow
HELLO GROWING FRIENDS - Please look at my Aftermovie Growvideo, which cost me about 4 hours to create. hope you like it! Day 72: The Finale 🌿🌟 It’s finally time. My very first grow is coming to an end—at least the cultivation phase. The plant is now ready for harvest, and I can’t believe how incredible this journey has been. I never expected to enjoy the whole process so much—from nurturing the plants to watching them grow and evolve. I’m absolutely hooked and can’t wait to dive into the next steps: harvesting, drying, curing, and of course, starting a new grow soon with fresh ideas and experiments! While it may not be the largest yield, the quality of the buds speaks for itself. The time, love, and care I’ve put into this grow is visible, and I’m pretty proud of the results. I’ll admit, I was a bit impatient at times (which I think every first-timer can relate to 😅), but the experience was priceless. Here are a few interesting highlights from my trimming and harvest process: 1️⃣ Dark Phase Before Harvest Two days before harvest, I put the plant in complete darkness to encourage resin production. I'm not sure if it really made a difference, but it was worth trying! 2️⃣ Wet Trim vs. Dry Trim I decided to go for a wet trim because the buds were really dense, and I wanted to avoid any risk of mold. I’ve read that wet trimming can speed up drying and may slightly impact the quality, but this is part of the learning experience. Next time, I’ll try a dry trim for comparison! 3️⃣ Yield Update Wet, the total came in at 209 grams from my plant. Trimming took around three hours, and it was actually a lot of fun, despite the time commitment. 4️⃣ Curing Plan The buds are now hanging in the tent for about 8 days. Once dried, they’ll go into jars with Boveda Packs (62% humidity) for another 3 weeks of curing. I'll update the smoke report once they’re fully cured, but I’ve already had a sample of the same strain from a friend, and I can say it’s pretty amazing. Final Thoughts on My Grow 🌱✨ As mentioned earlier, this grow has been an absolutely incredible experience, and it has definitely set me on a path to jump right into my next grow. There were ups and downs along the way, such as over-pruning, which I believe stressed the plants a bit. Additionally, I think they could have benefited from an extra week to mature. We also faced many temperature fluctuations this summer, which impacted the plants due to external weather conditions. I’m really pleased with the quality of the buds. The quantity is okay—I can’t fully gauge it yet—but I’m sure there’s more potential to unlock. I’ve gained valuable experience in what worked well and what didn’t. Overall, the countless lessons learned during this grow far outweigh the few mistakes made. I’m incredibly proud of my first results! As this long journey comes to an end, I want to thank everyone who followed along. I hope you enjoyed all the content. In that spirit, happy growing, and see you next time! 🌟
Likes
7
Share
Día 56 desde que salieron a la superficie y así es como se ven. Desarrollo sano y explosivo para estas nenas, se han ido llenando de tricomas y todo sigue bastante bien y normal.
Likes
8
Share
@Portnugs
Follow
Wasn't the best run, my first Hydro grow and I had a lot of over nutrition issues during vegetation which I expect will reduce yields. I also had a bit of bud rot on one of my plants even with humidity of 55 percent and 26c with plenty of fans I expect the plants immunity was compromised from the abuse that happened during veg. All in all, this strain is worth another attempt will defenatly keep this strain for a second run in the future. Next up - - > canna aqua trial with killer glue by little chief collabs - - > legendary AK 47 x Original Gorilla Glue 4 Will add more photos of cured buds and dry weight in the next couple of weeks.
Likes
8
Share
#AutoWhiteRussian breed by Outstandingly Awesome Team #DivineSeeds #DivineSeedsSquad #DivineSeedsBreedingCompany Yo!!! This Lil Beauty popped open in under between 16-18 hours of Germination using this Wet Papertowel Method, this New Heat Mat, Baked potato ToGo Container and Regular Tap Water Helped Tremendously! Heck Yeah Growmies and Growmets!!! She's looks Amazingly Great in her 1st week of Veg! Let's Grow!!! DivineSeeds: #AutoWhiteRussian Origin:Afghanistan Type:Indica/ Sativa/ Ruderalis Flowering:65 days THC:24 % Harvest:400-600 g/m2 Height:100-150 cm https://divineseeds.net/ https://instagram.com/divine.seeds?igshid=osxe2v7en33v I love and Appreciate Everyone!!! Thanks Again Team! Cheers Famz!!! Much Props and Much Topz!💯