Day 35 - few pics and vids..... everything going along nicely 👍 This is a pretty big update, so i'll add to it over the next few days, as i finish building it all.... i'm building these 2 x SS haze, the full tent, just finishing up the setup..... trimming them, changing solutions to 12/12 and flower..... changed the exhaust fan and filter setup to the better outside the tent method.... and installed 12v CPU computer fan, lol ("alta9" fits in 4in ducting perfectly), drops wattage on extractor fan.... 10w tops... got a few kg of active carbon and making/replacing the carbon filter .... i'll add afew vids of the new setup in afew days... Day 36 - few pics/vid of new tent setup...... "alta 9" fan :) post tomorrow after i finish trimmin and settin up night mode etc...... and into tomorrow we go, lol ... Day 37.... slowly getting there..... little bit more to go... this should make things abit more interesting..... right tank (short babie) has : 19 lts of tap water @18oC + 150 ml -dutch master one gold FLOWER.... 6.4 PH - 1400 PPM left tank has : 19 lts of tap water @18oC + 50 ml of elements a and 50ml of b and 10 ml of nitro and 20ml of Crystalic (molasses/pot) .... 6.5 PH - 1200 PPM more pics / vids of the finished tent setup.... roots, transfer, etc... Day 37 is alot of vids of the clean and change to flower..... edit - day after build noticed left tank (nutrifield) not enough bubbles..... pulled out the 4 air pump and swapped to the 2 x original oxipumps... much better, also to fix the problem with ph goin high, and bubbles not stirin the mix, was to add another 10ml of crystallic and another 5ml of nitro... then pumped both tanks with ph down and set em to 5.8-6.2 - both plants have fully recovered from the big trim, and bounced back within 12-24hrs, post pics/vid in abit..... Day 39 - made a freaky video... was curious about what the plants would see looking up at the lights... the lights and buzzing of air compressors and bubbling tank water, and dazzling lights turned out pretty cool in vid editor, was in selfie mode.... and final vid of the bounceback from trim :) 👍😎

visible flowering week 4 the bruce banner seems to be a late flower there doing well on there Plagron nutrients and there loving the new sun Spectrolight Blast 400

🗓️ 9° WEEK FLO // DAY 57-63 (from switch) // DAY 141-147 (from the sprout) ⚡ Light: 40 cm / 200 watt. Due the high temperature, I set my controller on 29° C max. So the Tent-X dimmed the light to keep my grow-box in the right range; ⌛ Schedule: 12/12; 🌡️ 29.5° C - 65% RH average; 📑 PH 5.7 - EC 1.8; 🌱 Trichomes mostly cloudy, ripening blend is working well; ⚙️ Fans, extractor and pump ON 24/0. No dehumidifier.

Hello fellow growers. Croptober is here. Still displaying flowering on the week because I only harvested 2 of 5 plants. I checked the trichromes and they were T-d off and all milky white. I will wait a few more weeks for the remaining plants. The goal is to have a couple plants at the beginning of the harvest window and harvest the rest when they are more mature and ripe. The 2 plants I harvested were the bigger ones and each yielded about a pound each. One was the tall purple nug plant and the other was the bushy one. The shorter one smelled like gas once you got all the flowers bundled together, definitely can smell the sour diesel in the genetics. The tall purple one also smelled gassy, but also fruity. I would describe it as a mango/orange smoothie kind of fruity aroma. I didn't get a lot of popcorn and even the smallest nugs looked at least like a grams worth. The bud was sticky and gave a lot of finger hash. The leaves also looked packed with trichromes so I will save them for making medicine. The plants didn't grow as tall as I expected. I've honestly had indicas grow bigger, but the quality of the herb is there. Next time I will start these seeds earlier in the year to get bigger plants. I started them in May, but usually start my seeds in late March to get the roots to develop earlier. Usually they get stunted in height when you start them early, but the roots are developing. Once they take off, they tend to grow bigger because they already have an established root system. IMO BTW. The DRY. I placed the nugs in one of those multi-level mesh containers for drying. I used the top three levels. They started off displaying around 85% humidity on the first day and on the third day are now down to 68% humidity at 76°F. They are not moldy. I handle them once daily so they don't flatten out too much on one side. This is the down side of using this type of drying technique. By the fourth or fifth day, they should be ready to start jarring. I've left them longer in the past, but they start getting really dry if you leave them in the mesh too long. Smells like it's going to be at least a two to three month cure to get that smell out, but the one I already had curing from 2 weeks ago is already smokeable. We will see how good it gets by the end of the year. I can't wait to see how the remaining plants turn out. I will let them go as far as I can to see how the smoke differs from the early and the late harvest. Sativa dominant genetics should go at least another month, but I will start with the let's check in 2 weeks rule. Thanks to everyone following. This has been a great year for growing.

Está semana el viernes 4 echamos te de compost aireado que lo tuvimos 24h cocinando y el sábado 5 defoliación agresiva de satélites y ramas que no le daban la luz

24-02-2022: Decide to remove all the fan leaves of the smallest lady. Just to see what happens. If it is doing her any good I will remove the fan leaves of the other ladies too by next week. Love her without the leaves, she is basically one big bud :)

The Mandarine Cream is entering its third week of flowering, and the aroma is becoming increasingly potent. The plant is looking beautiful and vigorous, with the buds showing significant daily growth. The smell is evolving into a strong, citrusy scent, reminiscent of grapefruit. Environment: This week began with a cold front, bringing temperatures down to a minimum of 5°C and a maximum of 15°C. A light rain has helped increase the humidity, which could boost resin production, although the cooler temperatures may also slow down the flowering process, just as they did during the vegetative stage. Fertilizing: I've stopped fertilizing as the plant now has everything it needs from the substrate. Watering: Sparse, around once a week, to maintain the right moisture levels without over-saturating. Pest Control: Beauveria applications have been reduced to once weekly, and the garden remains completely free of pests, which is a pleasant surprise. Training: The main cola top remains tied down. I haven't done any further defoliation or additional training. The focus is now on letting the plant continue its natural growth as it transitions deeper into flowering.

-

This week, I gave my plants more fertilizer to test if they show any signs of burning. Now, I'm stressed out! I think I should give myself some seaweed to relieve the stress 😂 The girls show signs of calcium deficiency. I sprayed a small amount of calcium and magnesium on them to help them recover faster. I’m not sure why the new leaves are very pale. Could they be lacking iron? I think the high soil moisture might be causing issues with iron absorption, but I’m not completely sure. I’ll wait and see what happens this week. Considering that I use regular water, I expected them not to have a calcium deficiency.

Nachdem die Pflanze fast getötet wurde, durch vergessenes gießen, hat sie sich jetzt nach dem topping erholt und wächst jetzt enorm buschig. Ich habe den Moment gleich genutzt, um sie etwas in die Breite zu trainieren und sie hat ungefähr drei Wochen an Wachstum verloren.

420Fastbuds FBT2304 Week 8 Week 8 update on these two beautiful girls. They both appear to be growing great even though they're different in size and structure. The flower sites are swelling up as nicely as one could expect. So will keep up the same routine of nutes every 3rd watering. All in all Happy Growing

Den 63 od přepnutí.

Hello. This is the end of week 10 and the beginning of week 11 of veg. She's doing good. Did some trimming up on her last week. Got some of those huge leaves taken off, so the branch tops can get some light and grow. Trimmed under the plant too. Took off those sucker branches, the ones that don't reach up through the canopy.. I'll let her heal this week and then turn her over to flowering next week. OK. Be Good. and Merry... Happy... to All.

He who stops is lost, as an old saying goes I don't know exactly what the origins are, so here's a new Zamnesia season. We are in the middle of winter and despite growing in an area that isn't the warmest in Europe, it's really cold now. It's 16-18 degrees Celsius in the house and we need to bring the temperature of the propagator growbox between 20 and 25 degrees Celsius. So we first placed a layer of those 1 cm thick "rubberized" floors that are used for gyms, they are easily found on Amazon and are very useful for insulation. Then a heated resistance mat and then the closed propagator on top. Inside with our seedlings and the light on at minimum 20% we reached 24 degrees, not bad in fact the germination is proceeding very well. 100% opening of the seeds in water and almost all of them are opening in our biodegradable peat pots. ----- Our Green Crack F1 Hybrid Auto were born really quickly. About 24 hours in water and the two seeds had hatched, another 24 hours in soil, and off they were born on 01/12/2024 on the identity card we have this date. Special features very pretty, born regularly without any problems, if you have placenta problems or seeds that remain attached. read below. Is a Sativa Dominant probably running for Autoflowers World Cup let’see the results. . WARNING: Placenta Problems ---- ALWAYS look very carefully at the seedlings, if the seed or placenta prevents the cotyledon leaves from opening the plant dies after a while. Remove it delicately as if it were a condom or almost. I apologize for the example but it gives the idea to remove slowly delicately please. WARNING: If you choose biodegradable pots choose the largest possible and not paper/cardboard ones, there is peat which is the main component of most of the soil we use. If you want to avoid transmitting vibrations to your neighbors I recommend you install one of these gym floors under your growboxes, I did it and I also feel safer not to disturb. They are easily found on Amazon in different thicknesses, I took a gym model that is assembled like a puzzle, they are also found in children's shops, they are those floors that are assembled to make children play safely, or to train and to avoid vibrations from equipment or of any kind. Everything will be grown Plagron Pro Mix with 100% fertilizers let's start with Power Roots 1 Ml/l Plagron fertilizers are available on Zamnesia in convenient Pack formats for all growing styles. I used this with a simple search you can find the other products. ---- https://www.zamnesia.io/en/12119-plagron-top-grow-box-100-natural.html —— Try this strain drive me crazy! ---- https://www.zamnesia.io/en/10677-zamnesia-seeds-green-crack-f1-automatic.html Zamnesia Description // Forget what you think you know about cannabis. Green Crack F1 Automatic by Zamnesia Seeds is here to shake up the whole industry. Using F1 genetics, growing cannabis has never been easier. These plants offer uniform and abundant yields. Get ready to harvest high-quality buds, full of flavor and amazing effects. Growbox and Air System - Secret Jardin DS120w + fans + Exhaust fans and filters DF16 kit Light - Viparspectra P2000 https://www.viparspectra.com/products/viparspectra%C2%AE-2024-updated-p2000-200w-led-grow-light-with-daisy-chain-function ---- www.zamnesia.com

Doesn’t liked to be fed super heavy loves dry backs in flower.

she is doing good but more leafs than my fastbuds plants… we‘re excited for the last weeks

End of week 10 and coming on well now smells starting to get strong now on these especially the papaya cookies she’s frosting well and the branches are starting to bend so will need to hold them up soon gorilla cookies #2 had some problems but hopefully will recover nicely onto next week and happy growing peace

Plants looks nice and heathy after some defoliation but they are still pretty small 🤔 dont know what is the reason, hopefully they gonna get bigger 🙏

In two days, im gonna turn it to 12/12🙏