The Grow Awards 2026 🏆
Likes
11
Share
@FruitBud
Follow
Oggi uno sguardo prima di una bella sessione di foto stiamo andando forte il ferti prima di cominciare un bel flush per far saltare fuori tutto il gusto e l' aroma che cerchiamo e che sappiamo può offrire.👻
Likes
23
Share
@Wazowskid
Follow
Leaves started to grow bigger so definitely the 10€ light bulb is working, nevertheless I'm expecting to be much slower than what it should take to an autoflower to grow.
Likes
7
Share
Not a whole lot of height this week, but some nice leaf development. I may have overwatered them and slowed their growth, we’ll see how they progress 🇨🇦❤️🌱😎💨
Likes
Comments
Share
@Lvnsource
Follow
Start of week 2 today , went ahead and watered 50ml with nutrients this time around
Likes
185
Share
@Qutro
Follow
So here we are with the last chapter of this journey which had many ups and downs but overall was a great experience. I love growing, it slowly became my passion thanks for GD and the community. It makes so much better, and lot of fun, one can interact with others and can learn from each other. Thanks for everyone who was with me in this last 2 years, you made me a better grower.🌱🌞 So let’s talk about the progress. I grew Liberty for the second time because it was my first photoperiodic strain 2 years ago and totally impressed me with it’s high yield and the effects. I wasn’t disappointed this time either. She had great structure, responded well to topping and training, and was resilient to pests. The germination rate wasn’t as good as usual and finally got 3 different phenotypes from the 5 germinated seeds. I topped them once and performed low stress training to get a flat canopy. The strong structure and rate of growth was impressive in the first 10 weeks which was actually a vegetative phase. They didn’t have any nutrient issues and even though they were under stress for two weeks (was my fault) in mid flowering, they performed really good. So it is a stress tolerant variety in my opinion.👌🌱 The buds are large sized and fat with medium resin production and a different scent for each phenotype. They aren’t dense and sticky like some indicas, but that says nothing about their potency. Flowering time was longer than the breeders recommendation but it's worth all the patience. Four plants were harvested 10 weeks after switched to 12/12 and one after 11,5 week. The harvest took place in several phases and some were immediately trimmed, some were hung with leaves. Calyx to leaf ratio was high except one plant so was relatively easy to trim. Plants which were trimmed after drying was easier this time.💚✂️ Based on the name, you'd really think it's a strong sativa strain but actually, this plant is a balanced hybrid, and it shows in both the growth characteristics and the effect. I am satisfied how this grow turned out however I know that it could have been better without my mistakes. In those two mid flowering weeks when the VPN was off and they were in stress I lost both the yield and the quality of the bud structure. So the total weight is 475 grams. 41 grams ore smaller airy popcorns and the rest are nice nuggets. I weighed the plants separately because I stored them also like this for later testing and smoke report.
Likes
1
Share
Puede decirse que en crecimiento como tal esta última semana la pancake stomper se ha desarrollado muy bien inclusive podría decir que es la que más ha crecido y ha asimilado mejor los nutrientes para vegetativo hasta ahora, vemos que ya no se desarrolla como cuando inició la revegetacion.
Likes
28
Share
@J_diaz420
Follow
Día 15 se realiza transplantes de 1 a 5 lts . Esta semana se comienza con riegos vegetativos.
Likes
2
Share
Week 3 de la floraison deux phénotypes différentes issue de ce croisement Super Diésel#1 dominance sativa feuilles fine et long, strech important. La Super Diésel#2 dominance Indica feuilles large entrenoeud court beaucoup de tige latéral. Attendons la suite.
Likes
13
Share
@GrowerGaz
Follow
Can't keep up with defoliation once the autopots kick inn, best room upgrade ever. The Cuppa T was the biggest plant before the other four went in their autopots. Just pH water this week and a foliar feed with my KNF FAA, WCAP and LAB. Flowering start on the 29th under the new Lumatek Attis 300w
Processing
Likes
6
Share
@Mannabis
Follow
Time for the stretch! Lots of flowering growth happening now. I can see where the bud spots will be so I’m going to have to stop moving the branching around in the Scrog, also the branches are getting thick and less pliable.
Likes
Comments
Share
@Nillenium
Follow
In Woche 5 habe ich via LST probiert die Fläche etwas besser auszunutzen und habe dort, wo junge Triebe verdekt sind, einzelne Blätter entfernt. Mittlerweile zeigt sie auch ihr Geschlecht, so das ich diese Woche als 1. Blütewoche zähle.
Likes
8
Share
Likes
21
Share
Alright I've updated this postmortem and cure just to give an idea of what I was up to during the dry and cure weeks. This grow was a ton of work and I'm very please with the results. I learned a ton about soil and environment control and really feel like I'm gaining confidence and coming into my own as a cultivator. I've been playing a lot with ice water hash and rosin and have set some neat goals for the future like hunting ice water hash cultivars, going perpetual and expanding the amount of canopy I can work with by building a network of remote-operated satellite flower tents in friends' and family's abodes . I'm not sure I'll go through all this effort of documentation here again, but please follow along on my instagram, stay in touch and chill out with me sometime @Fullmeltalchemist.00 All in all, I was running 1000w of quantum board across three tents and pulled just over 1100 grams, which was a big goal of mine. Thanks for all the advice and love growmies! And thanks growdiaries for the platform. It's been coo.
Likes
217
Share
@yan402
Follow
This two were part of another diary and got moved out due to space reasons at VW8 and moved back indoors at VW20 https://growdiaries.com/diaries/218151-auto-god-s-glue-grow-journal-by-yan402 13.09.25 VW21 Both are looking good and are developing tighter nodes than when they were outside, I'm going to have to keep cutting them back every once and a while I also applied nematodes against thrips and fungus gnats. 20.09.25 VW22 some spots and some yellow leafs, I think it's a root problem, probably root bound, but both seem healthy and are getting thicker so maybe just top up with Coco coir and give a slight different nutrient schedule less Tri Part Bloom could do the trick MAYBE lol. 27.09.25 VW23 Topped up the pots with extra coco coir and trimmed the side roots a bit, both plants were root bound 📹 03.10.25 VW23 did a HST/LST session 📹 12.10.25 VW25 Done a major HST session to try and keep them in line with the Sunset Sherbet GF I have going in the same tent, rest in the video 📹 17.10.25 VW25 ffj/fpj/fish 30 → 60 ml 19.10.25 VW26 it just became a one plant diary, keeping #5, #6 gets it's own diary for testing nutrients. 20.10.25 VW26(?) Feed tweak: added 3 g Calcium Nitrate/ 30 L (≈ 15 ppm N + 10 ppm Ca) 24.10.25 VW26 did a defoliation and trimming session 📹 25.10.25 VW26 I'll be repoting tomorrow, 26.10.25 VW27 rest in the video📹 27.10.25 VW27 Epsom Salt 0 → 2.5, Calcium Nitrate 3 → 9 g 01.11.25 VW28 CalMag 60 → 30ml, TriPartBloom 20 → 30ml, Magnesium 2.5 → 3.5g 04.11.25 VW28 no more yellowing between the veins and no new spots, the changes to the schedule worked, rest in the video 📸 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 08.11.25 VW28 – no feed no water (*RUNOFF reused for indoor house plants) 🍶💧🍶💧🍶💧🍶💧🍶 💧 Nutrients in 30 L #1 🍶💧🍶💧🍶💧🍶💧🍶 💧 TriPart Micro: 10 → 30 → 40 ml = 0.33 → 1.00 → 1.33 ml/L 🍶 TriPart Grow: 0 ml = 0.00 ml/L 💧 TriPart Bloom: 10 → 30 → 20 ml = 0.33 → 1.00 → 0.67 ml/L 💧 Cal-Mag: 60 ml = 2.00 ml/L 🍶 Home-made FFJ/FPJ (new batch): 30 → 60 ml = 1.00 → 2.00 ml/L 🍶 Calcium Nitrate (Calcinit): 3 g ≈ 15 ppm N + 10 ppm Ca 💧 pH Down: Citric acid (BuxXtrade) — adjust to ~pH 6.0 📦 TOTAL: ≈ 160 ml liquids + 3 g solids per 30 L = ~6.0 ml/L active mix 🍶💧🍶💧🍶💧🍶💧🍶 ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ Tools & equipment ✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ 2× MarsHydro SP3000 ⚙️ MarsHydro 150mm ACF Ventilator ✂️ Trotec dehumidifier (big unit) ⚙️ Mini no-name dehumidifier ✂️ Kebab skewers (LST – stainless) ⚙️ Wire + roast skewers (LST assist) ✂️ Scissors (HST) ⚙️ Vacuum (for spills & cleanup) ✂️⚙️✂️⚙️✂️⚙️⚙️✂️⚙️✂️⚙️✂️⚙️ 🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 🦄Fantasy Feast ( Seeds)🦄 🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 Species: Hybrid (Regular) Genetics: The mother is Unicorn Whip by Dirty Bird Genetics. The father is Charcuterie by Cannarado Genetics. Effect: Unknown Mixed effect body and head high Flavor: Some phenos are Skunky gassy fruity, some are fruity sour citrus with a chemical touch and a touch of skunk Flowering: Estimated 8–10 weeks Resistance: Strong — Testing phase done YouTube Link: https://youtube.com/-m8h?si=A7x4Zlr2kj-_ga31
Likes
20
Share
@Freddd
Follow
Amnesia is 5 weeks today. Lots to say about this one, as expected she is big and bendy, so bendy in fact that I was able to try out my new LST clips on her and they work pretty well, able to ben the branches 90 degrees without snapping and the clips hold it all in place instead of trying to stand up again. I was even able to use them on the much more rigid Jack47. So this enabled me to have a scrog effect. The flowers are coming along fast. Can't wait to see how this ends up. The Jack 47 is not too rigid but it's thick branches would normally just be left till they grow long enough to try and bend them out a bit without snapping them off at the stem. However I was even able to get some LST clips into this and form a lower canopy with the two topped branches coming out the top. I may also flatten them out later depending on what happens. Now that she is flipping I'm expecting some good growth next week, but I don't know, never grown this one before, my LST work made all the beautiful large lower fan leaves point downwards, I removed them all today. Gorilla Cookies, what to say about this genetic monstrosity, she it beginning to stretch. The only reason I'm not throwing this out is that I want to be certain that it is a Gorilla Cookie, because I planted a replacement bean, and it looks completely normal. I thought the fat leaves on the Gorilla was good when I first saw it, until I realised it wasn't.
Likes
4
Share
Everything is chopped and hanging in the tent to dry. Looks like it should be a nice yield. Updates to come with dry weight.
Likes
1
Share
Topped 4 out of the 6. Going to transplanting next week.
Likes
5
Share
Son fotos y videos de múltiples cultivos debido a que nunca e realizado un seguimiento como tal, espero realizar uno ahora! Nutrientes Utilizados en general Trybac y Trypack biobizz. Las criticas siempre serán bien recibidas!😋 Espero les guste el contenido!
Likes
20
Share
Pheno #1/2 are coming up to 4 weeks in a couple of days and they are doing great… just set up my 4x4 so more room!! Pheno #3 is just 3 weeks and as big as the rest which is great the node space is just amazing on these and I can wait to see the flower results on these 💪
Likes
9
Share
@Xabii
Follow
Starting this week there will be a Mars Hydro VG40 at the bottom to boost the lower buds, they will not be as dense but will be good for some hash that's why I leave them be. The ORP probe is not calibrated and values are to be taken with a grain of salt. Values are average of the day. DATE - °C - RH% (Tent Temp/RH) 20240808 23.8 60.9 20240809 24.2 67.2 20240810 23.4 67.0 20240811 24.1 66.9 20240812 25.3 69.2 20240813 27.1 71.9 20240814 25.0 76.1 DATE - PH 20240808 5.91 20240809 5.79 20240810 5.77 20240811 5.73 20240812 5.79 20240813 6.09 20240814 5.68 DATE - ORP (mV) 20240808 250 20240809 175 20240810 107 20240811 118 20240812 88 20240813 85 20240814 84 DATE - EC(us/cm) 20240808 2240 20240809 2265 20240810 2162 20240811 2202 20240812 2187 20240813 2119 20240814 2141 DATE - CF 20240808 22.40 20240809 22.65 20240810 21.62 20240811 22.02 20240812 21.87 20240813 21.19 20240814 21.41 DATE - °C (Reservoir) 20240808 21.6 20240809 22.6 20240810 21.5 20240811 21.9 20240812 22.3 20240813 23.8 20240814 22.1