Likes
Comments
Share
La plante grossis et continue de le faire.
Processing
Likes
2
Share
Likes
44
Share
This week I changed the whole tent. I switched over to a MarsHydro TS1000 and have it cranked up to 100%. The light came in and I immediately had to separate the controller from the light and fix the mounting hardware. But that led me to realize I can have a much more temperature controlled and consistent environment. This light is a cool running light. Shout out to the light sponsor MarsHydro for the opportunity to break it in and let her loose next grow!
Likes
14
Share
Hey-O ! The girls are doing great, lots of frost development and thickening up. Big fat colas and nugs on these ones. Pretty sure the Mai cola is a solid OZ on its own 🤤 smelling very dank, and feeling greasy to the touch. All I have had to do this week is fill the humidifier and admire them as they grow 😎 not too much longer, hoping they finish around the same time as my other strain . Happy Gardening 🇨🇦👊❤️🌱
Likes
16
Share
Alguns ataques de bottritis e corte no top Bud mais consegui controlar com desumidificador alimentando com( ripen ) GHE desde o dia 50 caminhando para a colheita
Likes
105
Share
📅 Week 10 | 🗓️ Day 64–70 Day 70 – Lemon Cherry Runtz 🍋🍒 (2nd week flower) 🔸The second week of flowering has really picked up momentum. Densely packed flower clusters with long, ivory-colored stigmas; the calyxes are neatly stacked and the first sugar leaves are visibly “powdered.” The canopy is closed, the shoots are growing evenly – the lollipopping work at the bottom and the clean training are paying off. The stretch is noticeably slowing down, and the energy is now going fully into the flowers. 🔸The SANlight remains at 90% and ~30 cm distance (approx. 900 PPFD at the canopy). The leaves appear relaxed, without claws or lightening – so no indication of light stress. I keep the climate rather moderate, with good air circulation through the foliage so that the fresh resin heads remain dry. It's a bit cold at the moment, so I can't quite reach the VPD, but I'm not going to put a heater in, hehe. 🔸I watered as planned with BIO PK from BioTabs – carefully following the manufacturer's instructions. Otherwise, only water. The goal: to push flower formation without compromising leaf health. So far, everything looks great. 📈 Current Conditions 🌡️🔆 = 24°C 🌡️🌜 = 17°C 💨 Humidity = 69% 🔦 PPFD = 900 µmol (12/12) 🛠️ Setup (unchanged) 💡 2 x SANlight Evo 4-120 @90% ⛺ 120 x120 x 180 Spiderfarmer 🍯 Pots: 18 liter fabric pots 🌱 Soil: Bio-Bizz light mix 💊 Nutrients: BIO Tabs 🌱 “Easy, organic, only-water method. Save 15% with GDBT420. biotabs.nl/en/shop/”
Likes
67
Share
Crazy smells i already smoke 💨 this strains so I know what to expect from those buds and they are getting bigger👌😋
Likes
Comments
Share
@Ttbest
Follow
It is my first grow ever hahaha. I guess a pretty good growth.
Likes
17
Share
Babied these girls and shows the capability of some strains under optimal conditions. Especially throughout flower. Progress is becoming very noticeable.
Likes
89
Share
Ya la he cultivado varias veces y siempre ofrece tremendos resultados en todos los aspectos del cultivo. Más que contento nuevamente!!! Saludos!!
Likes
2
Share
@TTerpz
Follow
Start of week 13 (Day 49 of flower) 9/20/25
Likes
12
Share
Defoliation was done this week, open up the canopy for better light and wind flow. Sugar leaves are starting to change to a red color. Trichomes look long and abundant. Beautiful plant to grow.
Likes
1
Share
unfortunatly the weather changed and temperature outside dropped down to 12 degrees celsius. It had a big impact on my plants. One plant after another wilted and i tossed 28 of them. The substrate is also to wet and maybe it was to often recycled. Only 42 plants left and only some really look healthy like they should. I have to start again with new seeds to fill may table. I am so angry about the wasted time.
Processing
Likes
12
Share
#3 has beautiful pink buds very happy with these girls, hopefully the other two show some colour as the Temperature comes down. Have swapped the 250 red CFL for a 150 blue. May turn it off for the last week to get every last bit of pink possible! Pots have a nice wet dry cycle, have tried to hold back and not over water so I've been watering with a spray bottle. I use a 1L hand spray bottle and fill it up three to four times depending on the weather. Although it seems impossible to overeater with the breathable fabric pots. Which are awesome if I haven't said already. Perfectly fit 11 in my small cupboard which is lucky as I ordered ten as soon as he free one arrived without measuring them! Stoners eyes never lie! 👁️ Buds should be huge if they keep going at this speed! Haven't topped them for the natural look, been a few years since I've done it can't wait to see a big fat cola bud at the end!
Likes
35
Share
@Rap_a_cap
Follow
This is exactly the 🇲🇦 morroccan 🇲🇦 way of sifting resin from kief. Traditionally, apart the hand rubbing method, dry sifting through a mesh is the most used way to obtain resin, from 🇦🇫 Afghanistan 🇦🇫 or 🇳🇵Nepalese 🇳🇵 Mountains to 🇲🇦 Morocc 🇲🇦 Rif passing through Bekaa valley in 🇱🇧Lebanon 🇱🇧. The average size of meshes used vary from 90 to 180 microns and are mostly made by silk and for this reason uneven. I think the most productive ways to sift are Dry Ice and  rotating pollinator + CO2, I've tried a DIY pollinator built by a friend and it can reach up to 20/25% of resin extracted at 120 microns and 15% at 90 microns. But smell and taste don't reach that traditionally extracted but this is another story. Morroccan way is good compromise between a stashbox or more evolute methods. It requires less than 10 dollar of expenses. You need: a basin or pot  without handles a heavy-duty plastic bag that contains the basin a pair of chopsticks a good 120 microns net an elastic band tape Kif or trim q.s. Here is the link where I buy my meshes. Very high quality, customable size and material (steel or nylon) and length and very kind vendor on AliExpress https://a.aliexpress.com/_uwfQzq Drum for 3 minutes. .....perhaps you will find that you have an innate talent as a drummer, throw the shit away and put your head right......
Likes
36
Share
Day 122 / Week 7 of Flo: Since the colour of the fanleaves is fading away pretty quickly, i decided to add in a little nitrogen (in form of BioGrow). I havent been feeding any nitrogen since the beginning of the 5th Week of Flowering. Only the little that is in BioBloom, that is only 2% The complete solution i used is following: 16l Water (4 each plant) 8ml Bio Grow 48 ml Bio Bloom 16ml TopMax 48ml BioHeaven 48ml ActiVera Day 125 / Week 7 of Flo: I am not adding any more nutrients at this stage and i started watering every plant with 2,5l of water every two days as their demand is not that high anymore and i wanna keep humidity down to a minimum to prevent bud rot. To give you an idea in early Flowering i was watering every plant with 5-6l every 3 day's, from 5th week on i was giving them 4l every 3 days and now only 2,5l. As two of the plants (Plant #2 and Plant #4) are starting to look like they are close (about 10-12 days) to harvest i am considering to flush them one of the next days. The other two plants (Plant #1 and Plant #3) seem to be of the same phenotype and look like they can take a few days more, let's see.. Also they grew bigger and stretched more in flowering then the other two, maybe a little more sativa genes.. Day 127 / Week 7 of Flowering: Today i flushed plant #2 (back left) and plant #4 (front right) with 20l of fresh water 💦 from the well. Plants #1 and #3 are recieving 2,5l of plain water every second day for a few more days. Soon i will flush them too.
Likes
37
Share
Going into week 9. Train wreck is turning out amazing buds are still stacking new growth. The smell is just amazing. Soil ph tested at 6.3. The tds reading 2150. Lights at full 100%. So very happy how this grow has turned out. Exited to see it when the buds start to fatten up. Leave a like an comment below. Thank you for viewing. Happy growing.
Likes
5
Share
Eccoci qui... Siamo quasi alla fine del cultivo, odore, resina e colore ci sono. Attendiamo solo la maturazione delle cime che richiederà 1/2 settimane.... NON VEDO L'ORAAAA... Seguiranno aggiornamenti, grazie a tutti per il supporto🔥🌲❤️
Likes
11
Share
@AutoCrazy
Follow
This girl is getting close to being done now! I have had some cal-mag issues pop up. I should have gone with bigger pots this year. I started earlier then normal so the plants are bigger and hungrier then ones I’ve done in the past so I’ve had a few issues this run. This Fine lady has about another week left in her at this point I think She smells pretty awesome at this point!! 😎🍿