Processing
Likes
41
Share
@FoxyLoxy
Follow
switched the plant to 12/12 so far really not much difference other then a few inches of height. i do have some questions with leaves if anyone can take a look. for pretty much throughout this plants life as a clone ive had issues as it was my first photo and first plant in general. now after many recoveries the plant consistently having a decent amount of leaves look a little either burnt or deficiency stricken. now on another forum i was told nute burn. but im not really doing strong nutes, even after just water its still exhibiting this issue. the ph has been consistently alright. i just dont see what im doing wrong and a little nervous for flowering whats to happen.
Likes
51
Share
@Corwinism
Follow
WEEK 5 (03/28/2021 - 04/03/2021) Day 38: 03/28/2021 Plants had their first feeding today. It’s been about 3 or 4 weeks giving them tap water only. With my ppm dropping in the soil, I thought now would be a good time. Leaving out the Cal-Mag this feeding. Nutrient mix: 651ppm, 6.0 pH, 71℉ FF Big Bloom: 5ml/gallon (⅓ strength) = 15ml/3 gallons FF Grow Big: 5ml/gallon (⅓ strength) = 15ml/3 gallons ppm/ppm = runoff/soil JB#1 - 960ppm/309ppm, pH 6.9 JB#2 - 1290ppm/639ppm, pH 6.8 AP#1 - 1400ppm/749ppm, pH 6.8 AP#2 - 1190ppm/539ppm, pH 6.8 GC#1 - 1190ppm/539ppm, pH 7.0 GC#2 - 1350ppm/699ppm, pH 6.8 ------------------------------------------------------------------------------------------------------------------------------------------- Day 41: 03/31/2021 Plants watered around 5:30-6:00 p.m. ppm/ppm = runoff/soil JB#1 - 955ppm/653ppm, pH 6.8 JB#2 - 1070ppm/768ppm, pH 7.0 AP#1 - 1470ppm/1168ppm, pH 6.8 AP#2 - 1390ppm/1088ppm, pH 6.8 GC#1 - 1110ppm/808ppm, pH 7.0 GC#2 - 1160ppm/858ppm, pH 6.9 ------------------------------------------------------------------------------------------------------------------------------------------- Day 44: 04/03/2021 Plants watered between 5:30-6:30 p.m. Botanicare Hydroguard was used at half-strength to supplement the roots and as a preventative against rot. Tap water: 247ppm, pH 9.4, 70℉ Botanicare Hydroguard: 1ml/gallon = 3ml/3 gallons pH Down: 11.5ml Mixture: pH 5.6, 285ppm (+43ppm from pH solution) ppm/ppm = runoff/soil JB#1 - 858ppm/573ppm, pH 6.8 JB#2 - 857ppm/572ppm, pH 6.8 AP#1 - 984ppm/699ppm, pH 6.8 AP#2 - 1030ppm/745ppm, pH 6.9 GC#1 - 880ppm/595ppm, pH 7.0 GC#2 - 932ppm/647ppm, pH 6.9 ------------------------------------------------------------------------------------------------------------------------------------------- This week has been much more pleasant than the weeks prior. I believe my plants are finally getting acclimated to the medium and recovering from transplant shock. New growth is looking much healthier. Just as a preventative measure, I picked up some Botanicare Hydroguard to use in an attempt to supplement the roots and bring the pH of the soil down to where I want it. Personally, the pH remains just a tad too high for my liking this week. I would like it more in the range of 5.7-6.5 but I'll give it a week or so to see the reaction to the Hydroguard. I've continued with more LST on all but the Glookies #2. On this plant I simply did a topping. It was a risk, considering the plants isn't vibrantly healthy, but I need to maintain it's height. I also did a second topping to the American Pie #1. As can be observed from the photos, not all of the plants were shaped the same way. I got creative with the fabric pots and I decided to LST a few plants a little bit differently just to see which technique/style I liked the most. So far, I am digging the way the Jelly Bananen #1/#2 and American Pie #2 are shaping up. They are going to have a beautiful, wide canopy when they head into flower. I'm considering transplanting into 5 gallon fabric pots within the next week or two so I can flip them to flower two weeks later. My intuition is telling me this has been a pretty lengthy vegetative stage, thus far. I'm expecting all of my plants to double in size during the flowering stage, which should be anywhere between 65-70 days long. I made sure to select strains with similar flowering times (60-70 days). Thanks for stopping by this week. Please feel free to leave a comment or any tips/advice! Until next week! 🙏
Likes
34
Share
Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the Update 😃. Harvest day 64 since time change to 12/12 hrs. Hi everyone 😁. Today is the day . The lady was harvested. It smells extremely delicious and I can't wait to try it for the first time in a few weeks 😀. Immediately after harvesting, she was put into the drying tent. The tent is constantly 19-22 degrees and 63% humidity. After about 10 days, it is put into the glass for fermentation together with 62% boveda packs :-). Of course there will be a last update after fermentation :-). Until then, I wish you all the best. Stay healthy 🙏🏻. You can buy this Strain at : https://www.exoticseed.eu/ Type: Quick Sherbet ☝️🏼 Genetics: 75% Indica / 25% Sativa Sunset Sherbet X Black Lemon 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8
Likes
20
Share
@DrGanj
Follow
Finally starting to reach the SCROG. First time doing this but fingers crossed it goes well!
Likes
7
Share
Week 9 commence flushing. This lady is looking great, super frosty, sticky and got a sweet aroma. Removed some dying leaves and now we wait for chop in about 6-7 days.
Likes
17
Share
@Kirsten
Follow
19.1.25: I have watered all plants with 300ml of dechlorinated water PH'd to 6.3, with 1/3 jar of black strap molasses with Ecothrive Biosys-1g. I am looking to increase the sugars for microbial life and plant processes. It'll also add some extra Calcium, Magnesium and trace elements. I also, watered all plants with Bloom nutrients. Using dechlorinated water PH'd to 6.3 with the following nutrients: (ml/l) ;- ♡ 2ml Cal-Mag ♡ 2ml Ecothrive Flourish ♡ 2ml Xpert Nutrients Bloom Booster ♡ 2ml Biobizz Bloom ♡ 2ml Biobizz Top Max ♡ 1g of Ecothrive Biosys I watered around 1-3 litres per plant. Depending on size and requirements. I'm still spilling water containing the nutrient solution. 🙄 I am using this to rub into the leaves. I think a nice foliar massage won't do any harm, make the most of the situation. The plants have become very hungry and thirsty. Increased the water by double. I ran out of my TNC cal-mag. I decided to order the Xpert Nutrients brand, as I like their products. It isn't organic as far as I can tell, but I don't think it matters too much to me, to be honest. I also want to top dress this week, so I bought some Green Leaf PK bud Booster dry amendment from Amazon, too. I'll mix it with canna coco, perlite, worm castings, and Ecothrive Life Cycle. 24.1.25: I went ahead and top dressed all the plants with 4.5 gallons of my supersoil custom mix. This consists of the following substrate and dry amendments: ♡ 60% Canna coco ♡ 20% Worm castings ♡ 15 % Perlite The remaining 5% consists of the following dry amendments;- ♡ 10g Ecothrive Biosys ♡ 1 Tsp RHS Mycorrhizal Fungi granules ♡ 3 Tsp Vitalink Bat guano ♡ 4 Tsp Diatomaceous earth ♡ 8 Tsp Ground Cinnamon ♡ 10g Green Leaf Bud Booster PK booster. ♡ 3 Tsp Ecothrive Life Cycle. •Worm castings for some all round nutrition. •Cinnamon for mildew and bug repellent. •Canna coco base substrate. •Perlite for adding oxygen to the root and soil system. •Green Leaf Bud Booster PK Booster for blooming. Building strong big buds. •Vitalink bat guano again for Bloom. •RHS Mycorrhizal Fungi granules, to boost beneficial microbes. •Ecothrive Life Cycle for lots of great benefits. •Diatomaceous earth for Silica. •Ecothrive Biosys, for an extra microbial boost. Thanks for checking out my diary 🍃 ✌️
Likes
1
Share
@CaliJ
Follow
white widow auto from RQS, harvest of 200 grams dry for 6 plants in 7 liter pots, really happy for my first 🤩. after 4 weeks in a jar (which breathes 10/15 minutes a day), the taste and the smell are magnificent, the effect is excellent for the day, I will grow again, for sure, really a pleasure to smoke 🤩
Likes
15
Share
Precisei remover a rede de scrog pois tive problemas na coluna e não estava conseguindo cuidar das plantas. Fiz o manejo apenas com LST. Não estou conseguindo corrigir a deficiência d zinco da white widow 2, ja fiz inclusive aplicação foliar mas a deficiência persiste em continuar.
Likes
37
Share
This lady’s on the end ! Only water starts tomorrow! I’ll flush it hard to get a smooooooth smoke !
Likes
3
Share
@Borberad
Follow
Blütewoche 2 Die Blüte kommt in Schwung. Die Pflanze streckt sich und entwickelt Blütenstände. Der DLI wurde sukzessive auf 40-45 angehoben. Der Düngeplan bleibt unverändert. * Zustand der Pflanze: Kräftiger Blütestretch, erste Blütenstände sichtbar. * Wichtige Ereignisse: Anhebung des DLI. * Düngung & Messwerte: * Gießwasser: pH ca. 6,3. Leitwert 1,4 bis 2 S. * Drain: Wir stellen sicher, dass der pH-Wert nicht unter 5,5 und nicht über 6,8 liegt und der Leitwert die +/- 500 S Abweichung einhält. * Anpassungen: keine
Processing
Likes
5
Share
@BettaN
Follow
I've transferred the selected plants to bigger containers. I've noticed that I'm staring them all day and a friend has an unused old GoPro that he was willing to let me have for this grow.... So now the GoPro takes an image every minute. I've started working on a python to script to let me create a time-lapse video, FUN!
Likes
20
Share
Wieder eine Woche ist rum und den Pflanzen geht es gut. Ich wundere mich nur dass GG#4 erst jetzt nach Tag 63 in die Blütephase übergeht. Sie ist wirklich sehr buschig und groß, während Runtz F1 nur halb so groß ist aber schon sehr weit vorangeschritten. Einen so starken Unterschied hätte ich nicht erwartet.
Likes
33
Share
Nov 27th Nov 30th a.m. *** 3L Water and Molasses for its last meal. Lights-Out Friday morning, into a dark tent for 48 hrs. Harvest Sunday *** Dec 2nd - one last couple-litre drink of h2o/molasses/rezin to help her through the long night(s) Dec 3 - last day of man-made light comes after 12 Full weeks of Flower !!!!!!!!!!!! - also obviously going to be the largest yielding AutoFlower I have grown. (Walter White, Maui Wowie & Northern Lights Express) ea. grow has been bigger - goal is 48-72 hrs of darkness for Lemon Pie Auto (36hrs darkness is for the plants going into Flower…) -Photos, Chop and Hang happen on Monday morning
Likes
29
Share
@Lazuli
Follow
This strain was only topped in early veg and trained a little bit with LST. After 5 weeks of veg i removed the LST cords and just let her go and what a bush she was, very fat dense heads everywhere, bottom buds also rockhard. I used no boosters just organic nutrients from start to finish in pure coco
Likes
2
Share
The girls are smelling really nice…turned out a seed project but I sure would get some fire smoke. I’ve been feeding her 3 gallons of water daily preparing her for some charcoal ash…
Likes
66
Share
@Hashy
Follow
Light settings 12/12 on at 9.00am off 9.00pm Light power= 62% 150w Radiator settings LIghts on Turn on if temp drops below 23c Turn off if temp goes above 23c Lights off Turn on if temp drops below 19c Turn off if temp goes above 19c Dehumidifier settings LIghts on Turn off if humidity drops below 60% Turn on if humidity goes above 60% LIghts off Turn off if humidity drops below 62% Turn on if humidity goes above 62% Extractor settings temperature 24c with 1c steps Humidity 54% with 2% steps Max speed 9 Min speed 4 VPD aim 0.8-1.2 Wednesday 1/3/23 Day 36 Autofeed 5 15 minute runs Water 10L Ec=0.21 Ph=6.5/7.0 3L left Roughly 2.3L each. #1 no runoff 7.15pm Lowered light 3cm #1 DLI= 26.8 Thursday 2/3/23 Day 37 10.00pm Extractor settings temperature 24c with 1c steps Humidity 54% with 2% steps Max speed 10 Min speed 5 Friday 3/3/23 Day 38 Autofeed 5 15 minute runs Feed 10L Ec=1.73 Ph=6.3 2.5L left. Roughly 2.5L each. #1 no run Saturday 4/3/23 Day 39 5.00pm #1 Height= 28CM Dist= 40CM DLI= 25.3 Lifted lights 3 clicks and Lst and defoliate Sunday 5/3/23 Day 40 Bit of Lst and scrogging Monday 6/3/23 Day 41 Autofeed 5 15 minute runs Feed 12L Ec=1.78 Ph=6.3/6.3 4.5L left Roughly 2.5L each. #1 no run #1 DLI=25.8 Lifted light #1 Height=29CM Dist=46CM DLI=21.0 Tuesday 7/3/23 Day 42 (Day 14 flower) Radiator didn't come on when it should have. It was cold today and I don't understand why the sensor didn't trigger the Radiator. #1 Height=29CM Dist=46CM DLI=21.0 The 2nd week of flower has gone well. I have tried to keep the canopy of the overall grow as level as I can, the only problem with running different strains is they all have different traits and grow at different speeds. Nearer the end of the week the weather started getting cold again so the radiator is going to be working a bit more over the next week or 2. #1 Wedding Cheesecake FF still hasn't started stretching so I'm thinking she is going to be a short and bushy. She is looking really healthy and I think she is spread out enough not to cause any problems with airflow. Power used for week Light (1.77+1.84+1.84+1.84+1.84+1.83+1.84)=12.8Kw Extractor (0.19+0.24+0.25+0.27+0.31+0.31+0.41)=1.98Kw Fans (0.48+0.47+0.47+0.47+0.47+0.48+0.48)=3.32Kw Dehumidifier (0.69+0.65+0.0+0.01+0.6+0.02+0.69)=2.66Kw Radiator (3.3+3.98+3.38+3.16+3.8+3.31+4.07)=25.0Kw Water pump. (0.02+0.0+0.02+0.0+0.0+0.2+0.0)=0.24Kw Total for the week=46Kw Back in a week. Thanks for stopping by.
Likes
1
Share
Week 7 for Strawberry Gorilla by fastbuds, Absolutely loving this plant atm cant believe how much shes bulked up flower wise putting in mind shes only been in flower for 3 weeks! Shes been giving out such a sweet strawberry like scent cannot wait for her to be done. Getting a little worried because of the weather we've been having 😪 just rain on rain.... whenever i can i put her under shelter but the humidity is very high because of it. She was fed only once this week with some FPJ, Regulator, Enzym+ & Topbooster by @aptus_portugal just to give it an extra boost!
Likes
53
Share
@xbrico
Follow
D92/FD64 - Now the humidity down from the cull, showing no real signs of the rot...did take 1 or 2 more smaller buds and a few from the drying box that was getting the "Grey Beard" but <touch wood>, seems to have settled. The Lower buds appear to be ripening now and are a deep purple. This plant looks soo amazing, pity it was just not so strong against the rot (again, it was done no favours by out of whack temps [i let it get a bit low at night for colour] and humidity). Have bought a Hotbox Sulfume now for a preventative going forward so would risk this strain again now that I know it needs that bit more protection; 'cause it smells so different and looks so different, its a winner - as long as I can get it over the line safely!!! May hit this a blast with the sulfur for a couple of 2 hour sessions over the next week to ensure it remains without mold!!!! Apart from that, nothing else to report. Happy growing all!!! 💪
Likes
7
Share
Week 3 and a repot is done and now in day 3. Finally it’s settling down after the repot, which was not pretty at all😂 Hope to get some massive plants this run 🌱 ________________________________________________________________________________________ Light from @MedicGrowLED 😎 NEO 780 LED🔥 780 Watt⚡️💥 PPF of 2184 μmol/s & 2.8 μmol/J🔥 Full Spectrum V1/F1 🌈 WiFi smart connection & Smart Aura Control 😱