Good day to all my friends and visitors here on GD. At the end of this week EC is at 3.0 so first thing to do next week there will be reservoir change. All goes well looks like the big Tropicanna plant is maturing so probably about two more weeks for her....better photographs will come next week. I spray them every second day with CannaCure or a hydrogen peroxide solution to be safe from the moldy buds. The SE7000 runs at 550 Watt and about 35cm from the canopy and is doing an astounding job. For anyone who is interested in obtaining this efficient and affordable light fixture here's the link: https://spider-farmer.com/products/spider-farmer-upgraded-se7000-730w-commercial-led-grow-light/ Also i included a unpacking recording of one of the packages Spider Farmer send me for the next grow, If you are interested in buying this 6" exhaust fan with filter here's the link: https://cutt.ly/gwjZIk9r Thank you a lot Spider Farmer you guys rock 💚 That's it friends, I hope to see y'all next week.

Day 64 the queens got some fertilizer 💪😃👍 Day 65 that massive smell and these juicy buds 😃👌

🌸🍊✨🍭🌸🍊✨🍭🌸🍊✨🍭🌸 Back at it with Kannabia — huge thanks for the NEW EXCLUSIVE Upcoming Kannabia's seed Launch 🙏🍨🍊 Grateful for the trust and for everyone following along, I’ll run her clean and showcase what she can do. Dessert-party goals: berry–citrus sherbet terps, creamy finish, tight stacks, easy trim, zero drama. Veg 24/0, clean manifold + LST, flip on a happy, even canopy. Coco’s fresh, seed goes in now. 🚀 Added on 12.10.2025 🌞 Light conditions: Limited direct light for the first 4 weeks — ~4 h/day on weekdays and ~10–11 h on weekends due to tent sharing and work schedule. 🌸🍊✨🍭🌸🍊✨🍭🌸🍊✨🍭🌸 💭❗💭❗💭❗💭❗💭❗💭❗💭 ❗Events & thoughts worth noting❗ 💭❗💭❗💭❗💭❗💭❗💭❗💭 10.08.25 GW1 Sowed seed, soaked starter pot with #1 12.08.25 GW1 Seed popped hip hip hurray 28.08.25 VW2 Stopped using GreenBuzzBloom, took it out of the schedule. 01.09.25 VW3 TriPartMicro 10→30ml, TriPart bloom 10→30ml 12.09.25 VW4 Applied nemadodes against thrips and fungus gnats. 20.09.25 VW6 topped and trained for first time, decided against a full manifold as I lost a few weeks already. 26.09.25 VW7 Topped her one more time for 8 mains 27.09.25 VW7 Topped up the pot with perlite instead of clay pebbles this time, just trying things out, TriPartMicro 30→40ml , TriPartBloom 30→20ml 10.10.25 VW9 have her a haircut, umm be trimming the side shoots tomorrow, rest in the video 📹 12.10.25 VW9 done some extra trimming to clean up a bit and chose two extra side shoots to nurture info mains, so kept the 8 original mains plus 2 rest in the video 📹 17.10.25 VW9 FfJ/fpj fish mix 30 → 60 ml 20.10.25 VW10 Feed tweak: added 3 g Calcium Nitrate/ 30 L (≈ 15 ppm N + 10 ppm Ca) 24.10.25 VW11 did a defoliation and trimming session 📹 27.10.25 VW11 Epsom Salt 0 → 2.5, Calcium Nitrate 3 → 9 g 01.11.25 VW12 CalMag 60 → 30ml, TriPartBloom 20 → 30ml, Magnesium 2.5 → 3.5g 02.11.25 VW12 Did a cleanup in preparation for flowering, rest in the video 📸 13.12.25 VW13 Did another cleanup in the tent 🎥, also switched to the FERMAKOR PK Micro schedule,(I'll update later) 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 🌿 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 14.11.25 VW13 – Fed 5l of FERMAKOR PK → 2l runoff 15.11.25 FW1 – Fed 5l of #1 → 2l runoff 16.11.25 FW1 – Fed 5l of #1 → 2l runoff (*RUNOFF reused for tomato plants) 💧💦💧💦💧💦💧💦💧 💧 Nutrients in 30 L #1 💧 💧💦💧💦💧💦💧💦💧 💧 TriPart Micro: 10 → 30 → 40 ml  = 0.33 → 1.00 → 1.33 ml/L 💧 TriPart Grow: 0 ml  = 0.00 ml/L 💧 TriPart Bloom: 10 → 30 → 20 → 30 ml  = 0.33 → 1.00 → 0.67 → 1.00 ml/L 💧 Cal-Mag: 60 → 30 ml  = 2.00 → 1.00 ml/L 💧 Home-made FFJ/FPJ (new batch): 30 → 60 ml  = 1.00 → 2.00 ml/L 💧 Calcium Nitrate (Calcinit): 3 → 9 g  ≈ 15 → 45 ppm N + 20 → 60 ppm Ca 💧 Magnesium (Epsom Salt / MgSO₄·7H₂O): 0 → 2.5 → 3.5 g  ≈ 0 → 8–9 → 11–12 ppm Mg 💧 pH Down: Citric acid (BuxXtrade) — adjust to ~ pH 5.8 – 6.0 📦 TOTAL: ≈ 110 → 180 → 170 → 190 ml liquids  + 3 → 11.5 → 12.5 g solids per 30 L  ≈ 5.9 → 6.4 ml/g active mix per L 💧💦💧💦💧💦💧💦💧 ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ Tools & equipment ✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ 2× MarsHydro SP3000 ⚙️ MarsHydro 150mm ACF Ventilator ✂️ Trotec dehumidifier (big unit) ⚙️ Mini no-name dehumidifier ✂️ Kebab skewers (LST – stainless) ⚙️ Wire + roast skewers (LST assist) ✂️ Scissors (HST) ⚙️ Vacuum (for spills & cleanup) ✂️⚙️✂️⚙️✂️⚙️⚙️✂️⚙️✂️⚙️✂️⚙️ --- 🍊🍧🌬️🍬🍊🍧🌬️🍬🍊🍧🌬️🍬 Mystery seed (Kannabia Seeds) — NEW EXCLUSIVE 🍊🍧🌬️🍬🍊🍧🌬️🍬🍊🍧🌬️🍬 Species: Hybrid (GF / swift-flowering line) Genetics: TBA (breeder sheet pending) THC: TBA Effect: Euphoric, relaxed, creative (target profile) Flavor: Berry–citrus sherbet, sweet candy, creamy finish Flowering (indoors): ~6–7 weeks target (GF) Resistance: High (aim: no drama) Indoor yield: TBA Outdoor yield: TBA Structure: TBA Notes: Brand-new exclusive from Kannabia’s GF line — I’ll update specs when the breeder card drops. Goal is rich sherbet terps (berry–citrus + cream), low leaf-to-calyx, easy trim. Stage harvest stays on the table if tops finish early. YouTube Link: https://youtube.com/-m8h?si=A7x4Zlr2kj-_ga31

Pic was taken 2 days into the other week..all I can say that they are doing their thing have no complaints whatsoever....jus have to tighten up on feeding abit but results are great for the lil that's being done...have to work on increasing resin production and continue to dense up dem bugs Until next time happy growing

For this grow I've used, For the growth 1 sf1000 2 fan 15w 1 extractor 150mm 350m3/h 1 carbon filter 150mm 1 Hydro Shoot 60x60x140 1 timer 1 thermostat Heating system for the winter month To start pot 2l, after 8l 18 Hours On, 6 hours off light For the soil I've used plagron light mix and rqs pellets. For the blooming 2 sf1000 2 fan 15w Extractor + Filter 150mm 1 Lite 60 box 2 timers 4 RQS Fabric Pot 15l 12/12 Plagron batmix + RQS Pellet After harvest, I'll not use my usual carton dry, last time I've got mold on few big buds, si this time I've put the stuff in a room with 15w fan (see video), Thanks for all my friends! And again thanks to RQS and @James

I topped Black Strap. Started LST on Peach Crescendo.

The smell on this one is next-level for real! I got 2–3 different phenos, but they all carry that same loud scent I’d describe it as sweet and fruity I honestly can’t wait to smoke it, and judging by the insane layer of trichomes she’s rocking, I already know she’s gonna hit hard.😝😝

Anche lei ha iniziato con la pre fioritura..brave.belle mie andate avanti così 🤣😂💪🙏

Seeds started to pop about 4-5 days after germination I got 100% germ on this run

This girl is always reaching for the sky no matter the weather and we are happy to say she has gone into bloom. This is the second tallest in the garden and she is setting up quite nicely, she could slow her stretch anytime and we would not complain! There have not been any issues with her beyond the overall battle with the bugs that we seem to be winning again and we think she is fabulous!

Giorno 3 annaffiata con 2,5L di acqua

Clones got transplanted into my organic recycled soil in solo cups and under the dome. Under 300w LED QB dimmed at 50% Watering with tap water. My live soil is packed with nutrient's and minerals so there’s no need to add nutes for now.

I've done a big defoliation & some lollipopping @ day 12 The lady's are loving life

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

Start of week 5 (day 1) 8/20/25 Flushed with sledgehammer: 5/21/25

Buds are stacking nicely on every plant starting to get smells now. Cannot wait until they Start fading. It is one of my favorite parts of growing cannabis and fast bugs. Really knows how to steal the show when it comes to fade.🔥💯

Hey guys and welcome to start of Week 8! 🌻 Today is day 21 of flower so i went ahead and cut most of the plats Fanleaves off. It took a while but now the Airmovement is improved and the humidity should also be lower. I also hope I didn‘t stress them too much. From now on they will be reseaving less and less Nitrogen going forward. I hope the colours come through as well 🤞🏻 Thanks for following along and I will keep updating the progress. Happy growing 🍀