This grow is looking phenomenal. Can’t wait to wash for rosin! Freezing as of now update: test run of bubble this shit is fucing crazy gas. So pungent and full of flavor. Tried some wet Melt in the Puffco it hits like crazy. Great effects and gas flavor. Will be pressing asap update did a 2nd wash tonight of all the trim from plant 3. I’d say 600 wet grams. Yielded great and awesome color

Week 11

Going good this week. Really packing on the buds now. Added some more nutrients that I now have kicking around for a hydro grow. Plant 6 was transplanted last week as I thought it may have been having some issues. I pulled off all the yellow leafs and it seems to be alright. Just glad it’s still kicking. Question: Should I be pulling leaves off my other plants? There’s a few covering up lower bud sites but I’m unsure how it’ll effect my auto flowers. Question: Wondering when to harvest these bad boys. Trichomes don’t appear amber yet. Website for the seeds say 70-90 days seed to harvest. I’m wondering if I can push it to 90 days (13 weeks(ish)) even if they appear ready at 70. Will that effect my harvest?

23.09.23- 85 день жизни . Глобальных изменений не происходит , шишки продолжают толстеть и оплакать глаз . Это самое большое растение из тех , которые мне доводилось растить ! На данном этапе ее рост около 180-185. Сегодня я подвязал и распределил все толстые ветки под лампы , из-за своих размеров они прогибаются под своим весом . Теперь она получает все 300 w 28.09.23- 90 дней от прорастания ! Изменения идут медленно , цветы растут а листья желтеют . Думаю еще 2 недели и финишь ! Сейчас она очень огромная , а ее цветы размером с бутылку ✨🍁

3 ml npk in 2 l water And given half of it! Plant seems to like it And pruning worked wonder! Leaves are healthy and getting much bigger in size! 15 cms+ excited!!

Wow she over doubled her height this week. Grew 15cm! Now she's 25cm tall.

Just about have the temperature issue under control, doing a lot of LST to open up the canopy. The Alaskan Purple (soil) is really growing! Hydros should be taking off soon.

10/19: This morning when I opened up the closet I wanted to rearrange a little, but they were so packed in, it was almost impossible. So, I went up in the attic and ran some cables and hooked up my other 200w light in the top section. I moved the 4 smallest plants up there and it created a little bit of desperately needed space in the lower section...but I still doubt very seriously that I'll be able to grow all 15 to completion in there..it's only 14.5 square feet of space!😳 10/20: I foliar fed everybody with some SP-90 humic/fulvic acid and kelp me kelp you today. They will probably get fed again tomorrow. Drying out quickly- 10/21: I applied Axiom again today..I sprayed a whole liter of the finest mist I could produce..tops and bottoms of all leaves to the point of runoff. I fixed up a 5 gallon batch of nutes and fed everybody about a 1/4 gallon each. Later the same day.... Several of them look very overwatered..and it's mainly the plants in the back in fabric pots that have seen a grow or two. I think my pots are mainly just too close together for airflow to dry the bottoms out well enough. I put another big fan in the closet and turned off the evap cooler for the night. 10/22: Most of them look better this morning, but a few are still droopy, so I used a stainless steel skewer to poke a thousand little holes in the lower part of all the fabric pots in the garden to try and improve oxygen availability to the roots. I also carefully arranged the garden so that there are gaps between all the pots. I think I'll also space my waterings a little further apart. The topsoil is drying out well enough, but I don't want their roots sitting in muck. 10/23: Several of them are flowering now, and starting to stretch a little bit. I raised the lights about 2 inches today and dialed the ac infinity's high temp trigger up to 88f for a bit to get them to dry out a little faster, so the RH climbed a little higher as well...so I also set the ac infinity's high humidity trigger threshold to 65%. After observing signs of nitrogen toxicity on several of them, I realized that I made another rookie mistake...(where is my head??) The new 5 gallon bucket I'm using to mix a batch of nutes must be about 2 inches shorter than the one I had been using, and I never bothered to calibrate it....which I did today. So, for the past couple of feedings, I've been mixing in enough nutes for 5 gallons, but in only 4 gallons of water!!! I foliar fed them with BoomBoom Spray and gave them about 8oz each of boomerang and cal-mag early in the morning, and by 5pm they all looked happier. I'll give them a little drink of plain water tomorrow, then start them on flowering nutes the next day. 10/24: Several are starting to stretch now...and all but one are flowering. This morning I fed them another little dose of boomerang and cal-mag, and also added some bembe and open sesame to the mix. This afternoon, I foliar fed everybody very thoroughly with some humic/fulvic acid, seaweed extract, yucca extract, and big bloom (for the earthworm castings and minor and trace elements) I repotted the dwarf in a smaller container and gave it to my son. He's a bonsai enthusiast, so it's right up his alley...that's one less plant to deal with! 10/25: This evening I mixed up 5 gallons of pretty much everything except grow big. and gave everybody about 1/4 gallon each. I plan to flush them with sledgehammer on Sunday or Monday and only do foliar feedings like BoomBoom spray and fulvic acid until I resume normal bloom feeding mid-week. Because I've had such a good veg, I'm pretty sure the maximum number of plants I'll be able to fit into the lower section is 13...and maybe only 12. So, that will be my 4 or 5 shortest plants in the area above..in which case, I'll need more light... I think the new UVB light will have to wait until my next grow because I've got so spend a couple hundred bucks on seeds to be able to start another batch right before my current run finishes.😖😞😩😡

🍊 🐶 💜 🍊 🐶 💜 🍊 🐶 💜 🍊 🐶 💜🍊 🐶 💜 🍊 🐶 💜 🍊 🐶 💜 🍊 🐶 💜 Welcome to week 7, my fellow growmies!! 💚 💚 💚 I have nothing much to say, just that I'm in love! ❤️ DAY 45 Watered with 2ml bloom + more pk + 4 ml humics+ growzyme + 2ml calmag 💧 DAY 48 Watered with 3ml more roots + 4 ml humics + growzymes + 2ml calmag + epsom 💧 Thanks for stopping by, it's a true pleasure to have you as visitors!! 💚 💚 💚 😘 💜 🐘 ______________________________________________________________ About Sour Tangie Dawg cannabis seeds Sour Tangie Dawg is a sativa dominant cross between the famous Tangie and Chemdawg. Expect a combination of sweet & fruity mixed with a gassy, jet-fuel flavour. The amazing mix of citrus, tangerine, pine and gasoline produces uniquely rich, dank buds. The powerful sativa high is strong, uplifting and long lasting, great for creativity and socialising. Chemdawg is the parent of OG Kush, all Diesel strain originate from Chemdawg. The Tangie is originally a Skunk hybrid strain but extremely fruity with the trademark Tangerine flavour. This strain is potent with THC-levels over 20% alongside very generous yields of top quality weed, very suited for hash and rosin producers. If you’re looking for a strain to produce the best tasting concentrates this Sour Tangie Dawg is a proven winner! She easy to grow and the perfect choice for SCROG growing due to her growth speed and stretch. We advise switching to 12/12 light when 75% of the net is filled. For outdoor growers the harvest period is early October. Indoors she’s finished after 9 weeks of flower - fast for a sativa dominant strain. We recommend growing in soil with organic nutrients for the best tasting weed. Get some fantastic genetics here: https://supersativaseedclub.com/ 💜 🐘 ___________________________________________________________________________ SETUP: 80x80x180 cm Zelsius 240W Full Spectrum LED IR UV dimmable DW240H-A6-HS Heatsink color red LED Chips: 512pcs SAMSUNG LM301H + 24pcs Osram 660nm + 8pcs Osram IR 730nm + 8pcs UV 385nm Color mix: 2700K + 4000K 2,8umol/J Driver HLG-240H-C2100B Coverage: veg 5x3ft / flower 4x2ft Product size: 628x205x68mm Green Buzz Nutrients Shouts go out to my sponsors @GreenBuzzNutrients, thanks so much for your support! ❤️ If anyone would like to try their amazing organic products, use code GD42025 for generous 25% discount (for orders of minimum 75€) ✨ https://greenbuzznutrients.com/ Biobizz Lightmix custom exhaust fan 320/270cm³/h Carbon Active Granulate 240cm³/h tab water pH 8 - EC 0,25 with Calmag to 0,5 Advanced Hydroponics pH minus Grow + Bloom to pH 6.2 🍊 🐶 💜 🍊 🐶 💜 🍊 🐶 💜 🍊 🐶 💜🍊 🐶 💜 🍊 🐶 💜 🍊 🐶 💜 🍊 🐶 💜

Week 4 for these girls. They've doubled in some since last week. I took a couple of the bigger fan leafs off this week, also raised my lights up allowing some stretch. Starting to see some preflowers and pistols. So next week will be off to the flower stage. Happy Growing

Start of week 3, the three survivors are doing great! I did happen to find some algae growing on top of one of the rockwool cubes. (This was my fault for not fully covering the tops of them with hydroton to block out light.) As an attempted fix, I cut some square pieces of black cloth that I laid of the top of the cubes to block out the light completely. Hoping removing their light source, the algae will die off and discourage any further growth. If it gets any worse I’ll try using a hydrogen peroxide solution. Day 17, the three ladies are looking nice. Starting to see some nice healthy roots populate inside the buckets. I went ahead and upped their nutrients today. We will see how they are doing in the morning. -FloraFlex - 1.5g/gal of each V1 and V2. -Advanced Nutrients - 1/2 strength MGB and hobbyist additives. **Algae update: seems like using the black cloth to block out all the light has killed off that algae growth and I don’t see anymore so it’s working!** Day 18, I thought one of my plants had root rot. Which was weird for it to happen that fast in less than 24 hours since changing the res. Come to find out it’s just nutrient stain from the Advanced Nutrients, so thank god. #1 and #2 which are growing with FloraFlex got FIMmed today. I’ve topped plants before but never FIM. Not sure if I did it right, but that’s the fun in all this, is experimenting to see what works. Day 20, #1 and #2 are responding well after being FIMmed couple days ago. I decided to FIM #3 as well. I also decided to leave the 4th one out of this diary from here on out since she’s behind. We will stick with the original three that survived from the start. So far I’m really loving their bushy appearance and thick leaves. Their roots are coming out super nice as well! Pretty soon these babies are going to just take off!

Week 4 flower : everything’s looking nice still got the lights about 7-9” from top of canopy without any issues . The humidity has gone up to 50% in day and I can’t really get it any lower I’ve already got a dehumidifier so don’t want to get another one . I would like to lower to 40-45% and lower for last 2 weeks but can’t see that happening . I’ve started the pk from end of week 4 (day 28 )at 1ml per litre this took my ec to 2.2 I will see how it goes and maybe up it to 1.2-1.5 and I’m going to use the pk for 7-14 days then I will start the flush I also lowered the silicone to 0.5ml per litre 3x blue cheese plants are on the left but has spread over and 1x sunset sherbet on the right

we improvised with threads the mesh was badly placed but everything served and fulfilled its function, now the leaves have grown again and the mini jungle is re-formed, we really liked how the previous pruning turned out although aggressive to the plants it did not affect them they recovered almost instantly, and it works in our favor because of the space, so this is already the end of the second or the beginning of the third week, in the next one I will upload the pruning and everything as it is already at the end of almost the 3rd week of flowering, at least of the larger, the others, as you know, are 2 to 3 weeks apart, so for them it is 1 or 2 weeks of flowering, which is noticeable in their development. the risks that are written down in the diary are the fertilizer once a week, and 1 3.5-liter drum or a gallon is used, which is divided into the 2 largest and another equal gallon with a different proportion for the 5 smallest , in the newspaper it is written down of the great ones.

19.12.24: Ok so the powdery Mildew has appeared again, I have not watered, and the plants are doing well. Bubble Kush is still a bit lanky looking though. I have scooped out the top layer of soil to get rid of the Mildew, again. I then top dressed with;- Biobizz Light Mix, cinnamon, extra perlite, Vitalink Bat guano, and worm castings. Looks like we're are entering very early pre-flower. Really hoping the final stretch will make the plants bigger, as they're still looking small. Compared to my Fat bananas 🍌 in my first grow. Watered in with 300ml per plant containing;- 1ml per litre of Biobizz Bio-Grow 1ml of Biobizz Fish Mix and 1ml of Ecothrive Flourish. Fingers crossed 🤞 Thanks for checking out my diary 🍃 ✌️

The plant is getting used to the new led. Some leaves are making wired turn but the pistils are lokimg great and I don't think the plant is suffering from change of light, but much rather love it!!

Week 7 of bloom, and I’m thrilled with how things are turning out!🌟 One of the plants has been fully flushed this week and is now ready to be harvested.🌱✂️ It’ll soon be hung up to dry, marking the end of its journey. This plant was incredibly quick, going from seed to harvest in record time—impressive!🍂😊 That leaves me with the other Banana Purple Punch, which has now started its flushing phase. In about 1 to 1.5 weeks, it’ll spend 48-72 hours in complete darkness before being harvested. This plant is looking fantastic, and I’m excited to see how it finishes up. Overall, I’m very satisfied with this grow. Each plant has shown its unique character and pace, making the process both rewarding and educational. Can’t wait to see the final results from the Banana Purple Punch!😊

It was a wonderful journey, I really had the honor of doing this girl many times, this time even close to the Monster Zkittlez with which they generated the Runtz who was also in the grow. Super modern family situation, I wanted to try to figure out which one I liked best, and I still haven't been able to. at least I'm still tasting Runtz's first flowers and it's heavenly but the freshly picked Gelato and the upcoming Zkittlez are scary just to see them. Super resin, it really looks fake, I also have some macro photos that will make you cry. The resin is everywhere the trichomes are even in the largest leaves the scent is of the garden of eden. wow. Show. Really nice. It was freshly cleaned I want to try to do the resin the first time and then I have freshly cleaned and hung the whole girl upside down under the crop data next week when I clean and can give the detail. Gorgeous. Before being collected, she did two music therapy days, one of which in the dark with frequencies for plants and together we listened: 1 - Paolo Conte - "Gelato" al Limon 2 - Raekwon - Ice Cream to stay on the "Geato" theme and then all the M83 discography to be collected with the very famous Outro of Interstellar really seems to pass to a better life listening to that stuff. Top of the top

The brightest green in the tent, she is looking happy and wished me a happy Father’s day for the wonderful job I’ve been doing over the past two weeks 🤣. Very simple up to now with simply PH’d water at 6.1. I had read some research in regards of levelS of preferred PH throughout cannabis life cycle and only thing I remember was cannabis prefer acidic soils that we all know but in early stage of life PH water on the lower guidance of 5.8 is preferred as the opposite in late flower 6.3. For my personal experience I’ve been trying this now for the last two grows. Today is premix/transplant day. 3 gallon will be its final pot and should time permit I will do a quick vid tutorial of my mix using Gaia Green. Stay safe n Happy c’est la vie!

0.23v tuned to 7.83Hz Plants exposed to the Schumann resonance often show greater resistance to stress factors such as drought, diseases, and pests. It is possible that these natural electromagnetic waves strengthen plants' immune systems and increase their ability to resist disease. Pretty neat, in the afternoon when the tent hovers around 84F the plants are 🙏, can visually see in time around 10 minutes after I opened the tent the temp had dropped to 76 pressure was lost, she is still chilling but she doesn't quite have that perk anymore. *Salinity3.5% - 100ml H2O=100g The concentration of salt in a solution 3.5%= 3.5g in 100ml. Growing well. Not going to top or do any training, I'll let the plant do its own thing, she is constructing foundations now for what she senses ahead. Smart girl. ✨️ Let her, do her thing, let me do mine. The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity. Green hydrogen is hydrogen produced by the electrolysis of water, using renewable electricity. The production of green hydrogen causes significantly lower greenhouse gas emissions than the production of grey hydrogen, which is derived from fossil fuels without carbon capture. Electrolysis of pure water requires excess energy in the form of overpotential to overcome various activation barriers. Without the excess energy, electrolysis occurs slowly or not at all. This is in part due to the limited self-ionization of water. Pure water has an electrical conductivity of about one hundred thousandths that of seawater. Efficiency is increased through the addition of an electrolyte (such as a salt, acid or base). Photoelectrolysis of water, also known as photoelectrochemical water splitting, occurs in a photoelectrochemical cell when light is used as the energy source for the electrolysis of water, producing dihydrogen . Photoelectrolysis is sometimes known colloquially as the hydrogen holy grail for its potential to yield a viable alternative to petroleum as a source of energy. The PEC cell primarily consists of three components: the photoelectrode the electrolyte and a counter electrode. The semiconductor crucial to this process, absorbs sunlight, initiating electron excitation and subsequent water molecule splitting into hydrogen and oxygen. Water electrolysis requires a minimum potential difference of 1.23 volts, although at that voltage external heat is also required. Typically 1.5 volts is required. Biochar, a by-product of biomass pyrolysis, is typically characterized by high carbon content, aromaticity, porosity, cation exchange capacity, stability, and reactivity. The coupling of biochar oxidation reaction (BOR) with water electrolysis constitutes biochar-assisted water electrolysis (BAWE) for hydrogen production, which has been demonstrated to reduce the electricity consumption of conventional water electrolysis from 1.23v to 0.21v. Biochar particles added to the electrolyte form a two-phase solution, in which the biochar oxidation reaction (BOR) has a lower potential (0.21 V vs. RHE) than OER (1.23 V vs. RHE), reducing the energy consumption for hydrogen production via biochar-assisted water electrolysis (BAWE). BAWE produces H2 under 1 V while eliminating O2 formation: key word "eliminating". Air with a normal oxygen concentration of around 21% is not considered explosive on its own; however, if a flammable gas or vapor is present, increasing the oxygen percentage above 23.5% can significantly increase the risk of ignition and explosion due to the enriched oxygen environment. The addition of ion mediators (Fe3+/Fe2+) significantly increases BOR kinetics. Air: Nitrogen -- N2 -- 78.084% Carbon Dioxide -- CO2 -- 0.04% Hydrogen in homosphere H -- 0.00005% Hydrogen "GAS" H2 in homosphere - 0% "Nitrogen, oxygen, and argon are the three main components of Earth's atmosphere. Water concentration varies but averages around 0.25% of the atmosphere by mass. Carbon dioxide and all of the other elements and compounds are trace gases. Trace gases include the greenhouse gases carbon dioxide, methane, nitrous oxide, and ozone. Except for argon, other noble gases are trace elements (these include neon, helium, krypton, and xenon). Industrial pollutants include chlorine and its compounds, fluorine and its compounds, elemental mercury vapor, sulfur dioxide, and hydrogen sulfide. Other components of Earth's atmosphere include spores, pollen, volcanic ash, and salt from sea spray." Although the CRC table does not list water vapor (H2O), air can contain as much as 5% water vapor, more commonly ranging from 1-3%. The 1-5% range places water vapor as the third most common gas (which alters the other percentages accordingly). Water content varies according to air temperature. Dry air is denser than humid air. However, sometimes humid air contains actual water droplets, which can make it more dense than humid air that only contains water vapor. The homosphere(where you live) is the portion of the atmosphere with a fairly uniform composition due to atmospheric turbulence. In contrast, the heterosphere is the part of the atmosphere where chemical composition varies mainly according to altitude. The lower portion of the heterosphere contains oxygen and nitrogen, but these heavier elements do not occur higher up. The upper heterosphere consists almost entirely of hydrogen, cool. 78%nitrogen as N2, a far too stable bond to be used by organisms. 20%oxygen 0.04%co2 0.00005% hydrogen When lightning strikes, it tears apart the bond in airborne nitrogen molecules. Those free nitrogen atoms N2 nitrites then have the chance to combine with oxygen molecules to form a compound called nitrates N3. Once formed, the nitrates are carried down to the ground becoming usable by organisms. Will it react with the oxygen in the air spontaneously, the answer is no. The mixture is chemically stable indefinitely. A mixture with air near the release point can be ignited, but if this does not happen then when its concentration gets below 4% it will be unable to carry a flame. Taking a small detour into chemistry here, a key concept to understanding the health impact of nitrogen-based compounds is knowing the difference between nitrates and nitrites. What Are Nitrates and Nitrites? A nitrite (NO2) is a nitrogen atom bonded to only two nitrogen atoms. Very strong bond A nitrate (NO3) is a nitrogen atom bonded to three oxygen atoms. Weaker bond The optimal pH for nitrate (NO3-) depends on the process and the type of bacteria involved. Nitrification The optimal pH for nitrification is between 7.5 and 8.6 Nitrification is the process of oxidizing ammonia to nitrate and nitrite Nitrosomonas has an optimal pH between 7.0 and 8.0 Nitrobacter has an optimal pH between 7.5 and 8.0 Nitrification ceases at pH