The Canna Crumbly cocoa biscuits are always a delicious opportunity to fill up on energy. They are easy to prepare!   Ingredients: 30g Bitter Cocoa 300g flour 200g butter 100g sugar 5 eggs 1 bar of milk chocolate with whole hazelnuts HOW TO PREPARE THE CHOCOLATE BISCUITS 1. Boil the eggs for 8 minutes, cool them and shell them.  2. Blend the egg yolks and set aside.  3. Mix the butter in a bowl with the sugar, add the flour and egg yolks, mix, then add to the mixture a bar of milk chocolate with whole hazelnuts previously blended into small pieces (I used the knife for a coarse mince) 4. Add the cocoa to half of the mixture and let them rest in the refrigerator for about half an hour.  5. At this point, roll out the pastry to about half a centimetre, then create the variegation between the two doughs (here you can have fun), once the biscuits have been formed, arrange them on a baking tray with baking paper and bake everything for 12-15 minutes at 170 degrees. IMPORTANT: I put double the recommended dosage for the butter, thinking I was an expert smoker, but, next time I will follow the doses because I slept 12 hours, the edibles have a prodigious effect but you need to calibrate well otherwise you risk going to sleep at 8 pm!😇💤

Day 37 - Everything looks good.... they are drinking so much.... i built a bit more stable light setup, and i'll need to buy afew more plugs and stuff, to fill it out ...... i organised all the 2700k globes, ready to swap in..... still waiting on the exhaust fan, so i'll keep em in "grow" mode another week or 2 .... i'm vaping a leaf or 2, and drinking "green tea hot chocolates" .... it is so delicious in hot chocolate .... my health has picked up since starting the vape/drinks... the 21 thc/19 cbd is supa healthy ... Day 38 - Getting them ready for Flower, noticed they are lacking in nutrients, so i started em on the heavier dutch master gold flower nutrients. Day 40 - Added some pics. (they look droopy because they in night mode, just turned on lights for pic) - Started them on 12/12 flower, still working on getting all the lights, gear, and globes, for the right spectrum and amount of light.... atm got - 7x 2700k (click) , 2x 6400k (osram), + 60w light panel .... i'll go get some more gear today and hope to expand it to 10x 2700k , 2x 6400k ...... I put the exhaust filter fan on seperate power, so it doesn't go on/off with the timer, but stays on all the time.... it totally fixed up any odour problems, haha ....... Added some different pics for my light spectrum ... etc..... the outside winter temp is now at 40-60oF (5-15oC) so with the 12/12h, the temp inside the tent is dropping to 60-80oF (18-22oC), abit low, but flowering is supposed to be in winter, so idk, see how it goes..... I'm new to growing, so idk how this will work out....... just working it as i go.... i noticed afew spots on a leaf, so i upped the neuts abit more, they are still drinking like fish, huge amounts.... Day 40 late - new vids - Got the extra gear and installed it all... redesigned the initial setup, refined it with proper measurements, had to get my steel rule out, lol....... got the 12 leds in and running, 10x 2700k clicks, and 2x 6400k osrams, with the panel..... it's lookin beautiful and got the exhaust on 24 hrs now, all working perfect with 12/12 timer.... they are forming a few spots on leaves, so hammering the nute water into them now... they are drinkin 1-2 litre of nute water a day each.... (nute water = Dutch mater gold one grow/flower, 800-1000 ppm 6 PH) 😎 Some details about lights.... i did some maths on it, and included some handy pics..... because i'm using cheap leds, i'm keeping the distance at 25cm, they are leds so they won't burn, and it massively increases the lumens/lux/Par, and with my home built light setup, the leds are spread out enough to keep it lower.... worked out good..... something of note is that all the led globes are built/made in china... however different marketing/selling companies from around the world... and the german osrams are 1w leds ... by far the most superior, but anyone can design and send the requirements to china to build em, haha) it's not a contest, we all work together.... haha.... the person with the best led light globes gets my business, because i want the best for my babies.... :) (let me explain- 1w led vs 0.5 w led, the watt of the led projects the light, lumens, LX/PAR etc much further the higher the watt of the led....my 600w panel has 0.5w leds, the philips has 0.75, the osrams have 1w leds..... ) each globe philips (dutch)- 10.5w internal - 14 leds 0.75w 1055 lumens each globe osram (german)- 10.5w internal - 10 leds 1w 1080 lumens each globe click (cheap)- 9w internal - 16 leds 0.56w 800 lumens light panel - 70w - 600w 30 red - 8 red 12 blue - 8 white 7500k 1 ir - 1 uv = 20x blue 6400k - 38x red 2700k internal - 60 double leds - 120x0.5w 6000 lm

Ciclo di crescita breve ma ho avuto problemi in fioritura che grazie alla formazione della pianta mi ha permesso di raccogliere

The Ladies getting very Frosty and they like GLUE! A nice smell goes around every time i open the tent. It starts smelling like a little Candy Store with a Banana Touch its insane!

Overview of my grow: Tent: Secret Jardin DS120 4 x 4 (120 cm by 120 cm) Lights: 2 x 120 Watt CTlite c4 clusterled Climat: Trotec Dehumidifyer 240 watt- 10L/24h Filter: Prima Klima carbon filter PK2600 fan: 2 x Secret Jardin 20watt osc. fan Pots: Gronest 4 x 11 liter airpots Water : automated water system PH: bluelab Nutrients: Plagron cocos A + B Plagron PK 13/14 ATA cal/mag Epsom salt Week 8 She has now a lot more room because the pineapple is gone. she is doing good , i have give a PK boost last week . She is not as big as the gelato i did before.

Day 106, Flower Day 50. Looked at Trichomes this morning. GSC still showing some glassy/milky look. Bubba is pretty milky colored. Still needs at least a week. Went on vacation last week. Had somebody else water. They closed the door, so not as good air circulation. Bubba showed powdery mildew. Not yet severe, so I took the plant outside, trimmed off some fan leaves that showed mildew. Then I sprayed the entire plant with a 25% milk solution (whole milk) and let it dry. Back in the tent. Cranked up the inline fans and added a small fan to the Bubba tent. Just need a couple more weeks.

Blessed with the result as you can see the buds looks fantastic💎 The trim was super easy(make sure you have enough gloves)😂 Now 7-10 days on the dry rack then see you in 2025 for the smoke review Take care😁

so this was the last week before harvest.. i intended to cut her down christmas day but decided to put her in 2 days of darkness before the chop.. she is now harvested an sat for a few days be4 entering jars for a curing.. the smell and these nugs is so yummi 😅

13/3/26.day 36th from shedding the shell,beginning week of 6. was watered -3 liters water with 12 ml TERRA FLORES. 16/3/26 watered with 5l water, then big bud(2ml/1l). 19/3/26 watered 3l water with 10 ml TERRA FLORES. This time I decided to grow it without training. I think it will be better for this indica-dominant variety. I hope it doesn't lead to supercropping. I apply as much light as possible to prevent it from growing upwards. P.S.this lady looks like a real bear!!!

Top

Well I’m a bit behind here. I left out of town for a few days and come back to some issues. Issue 1: Overwatered Issue 2: Light went bad and wasn’t producing enough to give my babies what they wanted. They stretched and didn’t actually Grow any bigger just taller. They was very weak and was almost like a noodle. I had a old 600w burple light that did the job. I tested UVs and she was still producing like a champ, she just gets warm. Issue 3: Mfing PEST. I noticed in my soil to what I thought might of been beneficial mites, I was wrong. After some great knowledge from GD pros come to find out it’s Baby Gnats. Found some organic DIATOMACEOUS EARTH garden safe. I had to transplant my babies already but only went to a little bit bigger pot and not the final one. Burying the stem, and left watering. My soil was moist enough to feed during transplant obviously bc their doing a lot better. I’m applying my DE to the dry soil and to help prevent any issues im going to do a straight 6.5 water feed from the bottom. Just applying the water to my tray and letting them go get it. I’m hoping the DE clears the bugs up and I can get these girls back on the right track. Lowered the RH to help fight off these bugs. As of right now they took well to the transplant and already have gotten stronger at the stem. With challenges come knowledge! Thanks for checking it out Peace love & grow

FLOWER WEEK 8: Late Bloom Ripening & Heavy Stacking | AK-47 XL ​🌿 FLOWERING PROGRESS ​We have advanced into Week 8 of the flowering phase, and the AK-47 XL is deep in her final ripening stage. The plant has successfully navigated the peak of the summer heat and is now putting all of its remaining energy into swelling and resin production. ​The colas across the Scrog net have become remarkably thick and heavy, showing massive structural density. The trichome coverage has expanded even further, giving the entire canopy a frosty, glistening silver appearance under the lights. Pistils are increasingly turning amber-orange as the buds mature and harden into solid chunks. The overall health of the canopy remains strong, successfully utilizing the maxed-out nutrient profile to fill out every single top above the screen. 📈 ​💧 NUTRIENT FEEDING & WATERING ​The plant is keeping up a high metabolic pace, effectively absorbing the heavy nutrient doses to maximize the final weight and compact structure of the buds. ​Current Feeding Schedule (per Liter): ​Bio-Bloom: 4.0 ml/l ​Top-Max: 4.0 ml/l ​Bio-Grow: 1.0 ml/l ​Bio-Heaven: 5.0 ml/l ​Acti-Vera: 5.0 ml/l ​Calmag: 1.0 ml/l ​Parameters (Weekly Averages): ​pH: 6.3 ​Relative Humidity (RH): 58.9% (Good, dropping trend to secure the dense buds) ​Temperature: 27.8°C ​VPD: 1.54 kPa (Perfect sweet spot for late-stage ripening and metabolic drive) ​CO2: 565 ppm ​💭 GROWER'S NOTE ​👀 Status Report: The environment is looking great for late bloom. Having the weekly average humidity at 58.9% with a steady VPD of 1.54 kPa provides the plant with the exact transpiration drive it needs to pack on weight without stressing the tissue. The maximum feeding of Bio-Heaven and Acti-Vera at 5.0 ml/l each has done wonders to keep the plant vibrant and active through these final weeks. The aroma is incredibly strong and pungent now. We are approaching the finish line, and she looks absolutely legendary! 🚀l km

Hello This is the end of week 4 and the beginning of week 5 of flowering. The plant is doing well and I see the resin has started to flow. I can defiantly smell the sweet diesel off it. But it has fruity hints too. Could be strawberry. The plant has a bit of red on the stem and leaf stems... so we might see some color at harvest... We'll see... OK. Be Great. Chucky.

With all these strains growing I'm loving watching the different structure the plants all have as they grow .. it's been crazy trying to decide which ones to train and how .. I'm thinking a net over them all and tying them down .. they will create this wall of buds that I can't wait to see forming all the different colours and flavours.. this is just a dam nice setup and I'm excited ..

uppotted the plants..

Still chugging along

She’s in the ugly stage right now. Getting frosty— lots of bud sites. No feeding yet!!! Just did a topping of living soil— Sohum. So I should t have to feed this lady for a few weeks. ✌️💚🌿💨

Chopped and drying some nice big dense smelly buds

Cultivation was very easy in terms of vegetation and up to half of flowering, where I encountered difficulties and ended up postponing their harvest. drying Purple presented 220g wet and 39g dry. I can smell a fruity scent on it and I see a lot of resin. I'm happy with the result but I still want a 50g plant.

Really big stretch! Doubled in height in a little over a week. Pre flower sites all over as she is getting ready to do her thing. I may have finally duplicated a successful effort.