Likes
Comments
Share
In week 10 I have some plants, which have grown taller than the rest (canopy is appr. 80 cm high now). In order to not have to raise my lamp, I rather correct their height by 'supercropping' them. Supercropping is a technique developed by SOMA from SOMA_seeds and works VERY WELL. Instead of topping your plants (=cutting off the main stem) it is better to take the main stem between your fingers (appr. 15-20 cm form the top) and brake the fibers inside and then bend it downwords. This way the stem will stay intact and heal itself and you dont loose the main buds growing on it later. In the video above I show and explain how I supercrop a plant. The plants are now getting more and more into flowering and therefore I switch the dimmer on my SANlight EVO4-120 plants to 100% now (see in video above). The BIO NOVA nutrients are increased as well a little bit, so the plants can build big buds.
Likes
26
Share
Day 85: First Grow We’re entering a new week, and it’s exciting to see the progress in our first grow. The plants are thriving, and the buds continue to get thicker and frostier. The formation of orange hairs is becoming more pronounced, indicating that we're on the right track. This week, we’ve decided to order a microscope to monitor trichome development more closely. Additionally, we're considering adding CANNAZYM to our feeding regimen to support bud growth and overall plant health. Let’s keep pushing forward and make this a successful grow!
Likes
11
Share
@Imbatman
Follow
Topped and defoleated the girls this week.. Started some veg nuts as well.. All good so far 🤞.i only water mine every 2 /3days. I don't water every day..
Likes
7
Share
@Adam22
Follow
Picked up some rhizotonic and had the fan on the past few days and all is looking well! They have been rotated as they started leaning towards the light and bending in one direction..My last veg light was 200/250w blue CFL however didn't notice at the shop I got a 125w I will pick up a bigger veg light for a slightly higher warmth and a bit more light coverage. Using the canna Coco range nothing else.
Likes
9
Share
Got some cal mag. My ph has been off and honestly these pots are huge and I’m back to work full time. It been hot and times been short so I’ve just been hiding these girls down when they get too dry. My well water is about 7.5. With some heavy rains I noticed it jumped up a bit close to 8. And some of the deficiencies on the leaves pointed to Calcium def due to high ph. Soooo order the cal mag and gave the whole crop a feeding. With PH’d water at 6.5 and 1tsp per gal and a 2 gallon water feedbing for the big mamas like my special queen here. Let’s see what this does. As I’m very new and this is my official first season. It’s all an experiment to me. I super appreciate all the advice I get here. I’m so glad I found this site. Everyone helps and points me in the right direction for better knowledge and learning. Some of my friends/family really enjoy watching this part of my garden grow and I’ve cloned some of this plant and the white og and gifted them. And am hopefully passing on some good advise for their first grow! Looks like 9/25 is when my sunlight will convert to 12/12 so I still have some veg time. This girl keeps out growing her space. “Gunna need a bigga boat”
Likes
18
Share
Hey Growmies, I apologize for the lame diary this week. I've been sick on and off the last two months and it's really taking a toll on my body and heart condition. Please forgive me as I'm trying to heal up. I'll do the best I can at updating this as I go along. I'm not giving up! The girls look great, despite not giving them as much attention as id like and they deserve. Great week of growth. I let her do her thing. I did minor LST and some hst on the other girls that I haven't made a diary for yet but will. Day 19 of flower.. week 3 of flower is about to wrap up which is nearing the end of the stretch phase. I was pleasantly surprised with the growth on the Watermelon Zkittelz, I've been putting the most work into her as the technique I'm using requires a lot of attention. Next run I will use tie downs and I'll most likely add a trellis here soon too help hold the heavy colas.. but we will see how it plays out. Looking forward to seeing her buds start to stack before my eyes! Thank you to everyone who has helped me through this journey! I've been really sick lately and my girls help keep me going! Day 20 of flower Today went well, I reorganized the tent and cleaned it a bit, I try to clean it once a week or so. I've been hand "drip feeding" one of the girls the last few days. Just an expierment and the plant seems to love it so I'm going to start hand "drip feeding" all of them. I think the Watermelon Zkittelz is going to love some extra food every day! I know us humans do but it's important to make sure the girls aren't stressed and isnt in a nutrient lock out or something. I think it's best when she's running prime! At the end of day 20 of flower I took a video of all the new growth and it was after I reorganized the tent and I feel so much better after doing this. I also turned off all the lights and turned on each light individually so I could see how each light was casting on each plant. This way I know the plants are getting enough light coverage as that is a huge disadvantage of using these budget lights. Excited for the 3rd week to come to an end!! Adding new nutrients next week!! Day 21 of flower ( end of week 3 of flower, 11 weeks from seed ) Grow is going great!! Have a good day!
Likes
12
Share
@Webacca
Follow
Auch hier ist die linke der Reihe die, die Gas gibt. Black Ice satte 15cm. Die beiden anderen auch nur etwa 10. Trotzdem alles im Lot. Sattes grün (vllt einen Hauch hell aber sehr gesund), guter Wuchs, alles so wie man das möchte. Wochenzeitraffer der letzten Woche ist dabei Update unter der Woche: Sie wachsen und saufen gut. Hab nochmal ordentlich Laub entfernt. Korioserweise hab ich dabei entdeckt, dass die Lemon Cherry Cookies noch nicht blüht sondern stretcht. Verrückt.
Likes
12
Share
Good harvest ! We’ll see the results after dryin
Processing
Likes
19
Share
Not much to report really, everything is in order and on track✅ The tallest plant has grown 16cm end of week 2 so 1 last week of potential stretch at that rate or hopefully less and it should all remain manageable 🤞 Facing some heat issues but it doesn't seem to be stressing my ladies they are loving life right now 🌞 Its been 25celcius here last few days and that translated to 28celcius in the tent🌡️ Gonna steal a few leaves here and there this week but nothing major, I'm happy enough with the canopy and its bud-sites 👌 Buds are developing nicely, hopefully I'll still get some dense nugs even though they are only wearing 6L shoes 👠 In the end though my main goal is clean and tasty smoke and ive been getting some nice fruity smells from the stem rub, especially the Zorro x Zkittlez #1 I'm getting a lot of lemon and lime from her 🍋🍇⛽ As for clean that's on me, in the great debate of flushing I'm all for it. I get that true organics is a different story but in coco which is what I'm using I notice the difference 🥥 I use bottled nutes which aim to be as close to organic as you can get in a bottle, Cellmax Bio always give me nice flavour and I'm just testing Buddha's Tree Organicus now alongside Cellmax Additives but I still always flush 🌊 Well that's all folks 🐰 Thanks for tuning in🙏 One Love💚 Fire Farmer🔥👨‍🌾
Likes
9
Share
Hi Gromie's, all is ok, humidity levels have been better since starting drip feeds due to water now in resovoir. Temps need to come up a bit. Have upgraded to a new Mars Hydro fce 4800 bar light. Really nice light , excited to see how it performs. Have increased nutes & feeding every 2 hours as of today . Plant is compact & close between nodes. Untill next week enjoy natures greatest gift smoke up🤘👍🤪
Processing
Likes
7
Share
She’s going strong ! I mean look at her go . This is going to be a wonderful yield with many top buds and surprisingly big popcorn buds.its now time to flush those nutes with good old plain ph water. Im checking the trichomes regularly and at different spots to determine when they are 80/20 milky then i will start the 48h of darkness before harvest to stop the degradation of thc and squeeze the most out of the resin glands. The smell is truly amazing, blue dream is by far my favourites everyday strain so seeing those buds just make me want to wrap the whole thing and light it up but patience is the key ! Drying and curing your buds properly Is the hardest and most crucial part
Likes
12
Share
- LST continues by stretching the plant outwards. - Both plants continue to stretch. Lamp distance is at 45 cm now. - Soft Defoliation continues. I am trying to remove fan leaves shadowing potential bud sides. But still leaving outskirt fan leaves. A big defoliation and lollipopping will be applied end of 3rd week. - Light intensity is at 100% since 12.06. The heat is still manageable as the outside weather is still around 21 C during day and around 10 C at night (Plants day). - VPD fluctuated this week between 1.0 and 1.6 kPa , averaging at 1,32 kPa. I still manage to gradually increase the VPD. - Tent temperature is much more stabilized at 22 at night and 26 Celsius at day time, averaging at 23.6. Temp is a little lower than last week even with increased light intensity due to the cold weather in Berlin. Still didn't increase the exhaust fan speed. New plan is to increase it on 16th Jun when the outside weather temperature starts to increase. - Humidity fluctuated between 50-65% this week, averaging at 54.6%. I managed to decrease the humidity gradually week on week but there are huge spikes on rainy days. BonAura AirOne dehumidifier continues to collect around 200 ml of water per day which does not seem to have an huge impact over the humidity. - This week, I increased the water Ph as the medium Ph is still under 6 cruising around 5,8. Mid week, I watered with an higher PH of 7,6, followed by a watering of 6.8 Ph. This even did not increase the medium Ph as expected. - Started to see some yellowing on the tips of the 2 or 3 leaves which seems like a Potassium or Calcium deficiency but I believe that it is related to the PH of the medium. Still observing before making any major nutrient increase. - Added an extra 20 grams of BioBloom (GreenHouse Feeding) per pot this week as the planned Flowering cycle is 9 weeks.
Likes
29
Share
Welcome back at the first week in vegetative stage of my Sensi Amnesia. As you can see, she got repotted in a bigger pot with new BioBizz LightMix soil. So far the growth of this lady is good. I started my Honeywell ventilator to give very slight wind in my tent. Also my Sanlight LED is now running on 60% with 40cm distance. This week she gets time to comfort herself in the new environment. Hopefully she will get some new leafs. Day 12: gave her the first water after repotting and added BioBizz Bio Grow with 0,75ml/L Day 14: gave her 0,5l water with 0,5ml BioGrow per liter. End of week 1 without any trouble. It’s nice to see the progress over the last 7 days. Will keep this strategy next week I noticed, that my tab water has a pH level of 7,8. I mixed it with filtered water to get between 6 and 7 Keep in touch ! Cheers HighZenBerg
Likes
23
Share
Altra settimana volata via per la BISCOTTI🍪 by ZAMNESIA con PLAGRON nutrient 🍽️ad alimentare le ragazze che stanno bene le cime stanno ingrassando 💣sempre di più e il gelo ❄️è ormai esteso ... il profumo dei fiori ⚘️🌻è molto intenso.....dolce... sembra delizioso❤️
Likes
13
Share
JOANNE'S CBD / ROYAL QUEEN SEEDS Week #12 OVERALL Week #11 VEG This week she started to stretch out she was a slow starter but she's really begun to grow the last few weeks. It's almost time to flip to flower!! Stay Growing!! Thank you for stopping by and taking a look it's much appreciated!! THANK YOU ROYAL QUEEN SEEDS!! JOANNE'S CBD / ROYAL QUEEN SEEDS
Likes
114
Share
💩Alrighty Then Growmies We Are Back At it 💩 Well folks we just finished up the last run and so we are back to do it all over again 😁 So what do you say we have some fun 👈 We got some Gorilla Punch 👊 👊 👊 DAY 49 👉 😳 So I've had a few issues what's done is done , but I think we are on track and she's doing good 👌 I've been experimenting with some new nutrients and ive been having a few issues 🤔 but I think I have under control 🤔 FC4800 from MarsHydro Lights being readjusted and chart updated .........👍👉Added an RU45 too the mix 👍 www.marshydro.ca 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈 Would you like to hang with the growdiary community 👉 https://discord.gg/gr4cHGDpdb 👈
Likes
3
Share
@CalGonJim
Follow
4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3. 4/16 543am 5ft tent sideways attached to 6ft table that can slide around 4/17 3:45am. Here’s the exact vibe you’re going for, and yeah, it’s dark, inappropriate, and could be hilariously unhinged if executed right: Video Concept: “Revenge of the Skid Row Sith” • Split-screen the entire time. • Left side: Clean, epic original Revenge of the Sith footage — Anakin vs. Obi-Wan on Mustafar. Dramatic dialogue, lightsabers humming, lava flows, John Williams score swelling (“Battle of the Heroes” or the full Mustafar duel track). • Right side: Real, raw bodycam or dashcam footage of two absolutely fried-out junkies (or one junkie vs. cops/security) going full delusional meltdown on the street — flailing, screaming nonsense, swinging wildly at nothing or at officers, thinking they’re in an epic lightsaber duel. Twitching, eyes rolled back, yelling shit like “YOU UNDERESTIMATE MY POWER!” while barely able to stand. One of them probably shirtless, covered in sores, pants falling down, yelling about the “high ground” while tripping over a curb. The comedy comes from the perfect sync: • When Anakin says “I hate you!” → Junkie on the right screams “I HATE YOU COPS!!” or just incoherent rage. • When Obi-Wan says “It’s over Anakin, I have the high ground” → The junkie is literally on the curb or a slight incline, yelling at the cop below him “YOU HAVE THE HIGH GROUND?!” • Dramatic slow-mo lightsaber clash → Slow-mo of the junkie wildly swinging a broken bottle or just air, missing by a mile while the cop easily sidesteps. • Anakin getting chopped up and burned → Junkie getting tased or tackled into the dirt, still convulsing and screaming about betrayal. Overlay the full Star Wars audio (dialogue + epic music) on top of the real footage on the right, so the junkies’ actual grunts and screams are mostly drowned out or faintly audible underneath, making it look like they’re perfectly delivering the lines in their drug-fueled psychosis. End it with the classic “You were the chosen one!” speech while the junkie is face-down in his own puke, getting cuffed, still muttering about the dark side. Tone-wise: Super dark humor. It walks the line of “this is fucked up” but the absurdity of the overlay makes it land as comedy instead of just tragedy porn. Think It’s Always Sunny energy meets Cops bloopers with Star Wars fan editing. I can’t actually generate or edit real video clips here (especially not real bodycam footage of people in crisis — that’s a legal/ethical minefield even for parody). But if you want, I could: • Write a full detailed script/timeline with exact timestamps from the Mustafar scene synced to generic “junkie fight” beats. • Suggest public-domain or fair-use-friendly ways to source similar footage without doxxing real people. • Help you describe it precisely enough to feed into a video AI tool like Runway, Kling, Luma, or whatever’s good for video right now (with heavy disclaimers on the dark content). Want me to flesh out the full beat-by-beat script for the Mustafar duel re-cut this way? Or pivot it to fully AI-generated characters (two cartoonish, exaggerated skid-row types in a filthy alley “Mustafar” with lava made of spilled fentanyl and burning trash) to avoid any real-people issues? It’s a nasty, wrong, stupid idea… and that’s exactly why it could be comedy gold in the right hands. Your call how far you want to take it."" 4/18 3:21AM 👨‍🔬🚨"Yeah, pH drift upward overnight (or over several hours) in a freshly mixed hydroponic nutrient batch is super common—especially when you let it sit with constant agitation like a magnetic stirrer. It's not usually a sign that something's broken, but it can make adjustment feel like a battle the next day. Why this happens with your setup CO₂ off-gassing + aeration/agitation: Fresh water (especially tap or even some RO) often holds dissolved CO₂, which forms carbonic acid and keeps pH lower initially. When you mix nutrients and run a magnetic stirrer all night, you're constantly agitating and exposing the solution to air. That drives CO₂ out, reducing the acid, so pH naturally rises (sometimes 0.5–1.5+ points). Magnetic stirrers create good mixing but also promote gas exchange, speeding this up compared to a still jug. Buffering from water and nutrients: Many water sources have alkalinity (bicarbonates, etc.) that acts like a buffer. Nutrients themselves have their own buffering capacity. When you add pH Down right after mixing, the buffers can "fight back" over time, slowly pushing pH higher as the solution stabilizes. General Hydroponics recommends mixing nutrients first, waiting 15–20 minutes (or longer), then adjusting—because immediate readings can be misleading. Temperature and time: pH readings shift with temp, and overnight changes let everything equilibrate. If your stirrer keeps things moving and slightly warmer, that can influence the drift too. Your General Hydroponics pH Down (usually phosphoric acid-based) should still work, but if the solution has strong buffering or you've already hit a stabilized higher pH, it can feel "hard to lower" because you're fighting those buffers. Adding it slowly while stirring, waiting 10–30 minutes between additions, and re-testing helps. Don't chase it too aggressively right after mixing—let the batch settle. Does this happen in the "reservoir" (rez) too? Absolutely—often even more noticeably. In an active rez (with airstones, pumps, or circulation), constant aeration drives the same CO₂ off-gassing, causing pH to creep upward over hours/days. Plant roots taking up nutrients (especially nitrates) can push it higher too. Many growers see this exact pattern: mix and adjust at night, wake up to higher pH. It's why a lot of people premix the night before, let it stabilize with gentle mixing/aeration, then do a final pH check and tweak in the morning before using. Quick tips to make it less frustrating Mixing routine tweak: Use your magnetic stirrer to fully dissolve nutrients, but maybe run it for a few hours instead of all night if the drift is too much. Or mix, stir briefly, let sit still for 30–60+ minutes, test/adjust, then optional light stirring. Water source: If you're on tap/well water with high alkalinity, that amplifies upward drift. RO water often needs more pH adjustment initially but can be more stable once set (though pure RO can sometimes drift differently). Adjustment technique: Add pH Down in small increments while stirring, wait for the meter to stabilize (it can take time), and re-test after 15–30 min. Track how much you use per gallon so you can anticipate next time. Test meter: Make sure it's calibrated and the probe is clean—old or dirty meters give wonky readings that make drift seem worse. If it's stubborn: Some folks add a tiny bit of pH stabilizer or just accept minor daily tweaks. Citric acid-based downs can drift more than phosphoric ones, but GH's is usually pretty reliable. This is one of those classic hydro "annoyances" that almost everyone runs into—your nighttime low-frequency tuning sessions with the subwoofer probably give you plenty of time to notice these little chemistry experiments too.""
Processing
Likes
6
Share
Pues asi va esta bonita cepa con 68 dias desde su germinacion y 30 dias a 12/12 horas de luz. Me encanta la estructura y la resina que esta produciendo. Esta oliendo de maravilla!!!