Now they are week 4 since I turn the light to 12/12

Greeeeeat week! Dynomyco has truly helped this Girly to get off to an amazing start and gave her the force to gain thick stems and more branches! It could also be the addition of Co2 in the grow area! I also give her a diluted foliar feed of formulex as she goes through the day as I have a very low humidity for that week but I can bring it up now as I don’t need it so low in my home! (Was drying other plants)

Out of water for 3 days and when I arrive she looks with all her leads facing down. As soon I put her water she refused but after few hours she becomes very healthy. I had to cut few yellow leeds

Harvested at end of twelve weeks, At week 11 the trichomes were 95% milky with 60% orange pistils. Appearance of Plant: Short and Sturdy with Thick Leaves Appearance of buds: Big & Dense Density of Buds: 10/10 Resin: 8/10 Dry Time and Cure for Smoke Report: 7 days at 55% Humidity // Temp: 71° Smoke Report: The smoke is really smooth that hit you instantly with a head high. Use cautiously as its quite strong if used in bigger dosage. I feel alert and can take on any project I have on the go at the time. Good for day time and also to relax at night. Pros of growing this strain: - Short and dense. Can be grown anywhere (very discreet) - Would be great for SOG - Fast and easy to trim barely any leaves on the flowers Cons: - Small yield - Very Short plant (needed to raise the plant to keep it levelled with other plants

Started to flush her hope she will grow a little bit more ! Love this smell and colors !

Another good week in the books down in the tent. Carl 1 and UKBS 1 are both developing some nice buds, Carl 1 with the bigger buds of the two. Carl 1 had to have a few more buds tied up today, as they overweighted what the stems could handle and started sagging like crazy, creating a lot of empty space in the canopy. Timelapse for the week is out, of course. Updates as they come; per usual. 6/11/2021 - Got a video of how the stem's degenerated, it's mainly on that one side. Somehow an entire branch snapped off of UKBS 2, upon further inspection I noticed it was barely attached to the stem at all and did not attempt to re-attach it. Additionally, some of the clones are doing alright and others are shriveling and dying. Not sure what the inconsistency is caused by. It may be the medium; being soil, stays wet for too long. I can't really think of any other reason. I'm misting them, the humidity stays high now that I have a dome for them, they've been dipped in stim-root and supplied mycorrhizae. Will be submitting a grow question as I'm completely new to the whole cloning concept. Also today: more bud shots using the fancy EOS T5 Rebel. Stay tuned! [Out now] 6/11/2021 - The branch drop seems to not have affected UKBS 2 much at all, something which continues to confuse the hell out of me. I may have to get a PVC greenhouse or something to flower the outdoor plants in, as they're giant and I don't know how they'll stand up to the high winds in the area.

The ICE is almost done; the NL doesn’t even seem close. Interesting since ICE sprouted a day later than the NL.

Gelatto is a flavorful strain whose taste has made it one of the most released strains in recent years. Indeed, more and more banks want to add it to their catalog. This version comes from the original Sunset Sherbet x Girl Scout Cookies formula, specifically the phenotype known as Thin Mint. On the American West Coast, this is one of the most requested new genetics. She is sometimes referred to as Larry Bird.

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.

Week 1-3 250watt metal halide Week 4-13 250 watt hps 5 gallon living soil in fabric pot Red clover living green mulch Alfalfa sprouted seed tea (seedling stage) Spinach fermented plant juice ( during vegetative) Calcium phosphate from charred bones ( added during transition to flower) Lacto bacillus (once every 4 weeks) Fermented fish amino acids (during early flower) Top dressed with gaia green powerbloom. (Early flower) I decided to top this plant really last minute 10 days in to flower( yeah I know, probably not the best idea) and it didn't even phase this girl at all. What I learned this grow: Some plants smell more than others( by a lot). Use a filter even when venting outside. The Green mulch was nice until I wanted to top dress. Need to find another form of mulch that I can move. Lay off all the additives a bit. Not sure if any of the things I added really did anything but I like to experiment, and she took it well. I will definately be growing this sexy little plant again💚

D8: PPFD to 400 D9: PPFD to 475 D10: PPFD to 550, 300ml water (saturation of 1l pot) D11: PPFD to 620 D13: 300ml water D14: Transplant day!! 75L fabric pot, bottom 5cms filled with hydro pebbles. Soil mix: 50% soil, 30% perlite, 20% worm castings. Watered in with 1L +calmag and power roots

Day 54 and I think we're on track to harvest some time next week. I've decided not keep any of these as a mom, the back left one has some potential but non really seem like good hash plants. I'll jar test each to make sure but all have really greasy trichromes.

Moved into the corner now, with just enough room and out of the autopot tray 📤 Smelling dank, doughy, hashy, citusy, floral fruity Removed all training clips ✌️💚

Nice growth after 4 days following a heavy defoliation. The Slurricane is overall smaller that the Bruce Banners they sit beside, but the nodal spacing is amazing and the branches all have ample access to the lights. The stems when crushed smell very heavily of lemon. This is a common trait with GreenMachine's grow of this strain, and he says his pheno like this turned out to be very fruity in flavor. The 60 day countdown is on, this should be a frosty grow

Esta semana hubo un crecimiento muy acelerado. Estoy manejando la altura de las plantas con HST y corte, esperando a una nueva que agregué, para que empiece a estirarse. Cuando tenga la altura de las otras plantas, paso todo a floración. Estuve cortando los bajos de algunas plantas. Otras las estoy dejando crecer un poco para hacer nuevos esquejes. La solución se mantienen las mismas proporciones. Voy a ir actualizando la semana con fotos diarias, para tener una referencia del crecimiento. Día 16. El crecimiento es increíblemente rápido. Estoy aplicando cortes y super cropping porque quiero lograr plantas bien fuertes y bajas. Además quiero aprovechar la superficie de cultivo lo mejor posible. Por lo que voy a hacer varias cabezas por planta, y voy a intentar darles bastante crecimiento para que den más producción. Iré actualizando. Día 19. Se aplica bioestimulante Aux ym foliar. 2ml/l. Ya preparando para pasar a flora en 10 días. Prendí una de las luces laterales par darle más luz a la pequeña Jamaican Dream de prueba que hay en la punta. Día 20. Mañana se cambia la solución. Las plantas estan creciendo mucho. Voy guiando algunas ramas para que queden todas a la misma altura. La pequeña tiene toda esta semana para pegar el estirón final antes de pasar a flora. Confío en que va a llegar porque es sativa 90% a diferencia de sus vecinas 80% indicas. De todos modos me voy a concentrar en las Green Tiger, ya que este diario está dedicado a ellas principalmente.

Divine Seeds - Opium After 122 days of growth and 74 days of flowering, it's time to say goodbye to this stunning beauty and bring in the harvest! The buds are massive, dripping with resin, and have an incredibly strong, alluring aroma. We are absolutely thrilled with how she turned out! We decided not to weigh the buds while they’re wet; we’ll wait until they’re dried to get the final weight. But from the looks of it, we expect a very satisfying yield. A huge shoutout to Xpert Nutrients for their exceptional support, reliable service, and, most importantly, their outstanding fertilizers that have consistently helped us grow such powerful, high-quality plants. Year after year, your products prove to be a key element in our success. We also want to express our deepest gratitude to Divine Seeds for providing such superior genetics. We’re beyond impressed with Opium and are excited to grow even more from your incredible lineup in the near future. And yes, we’ve already sampled her, and the smoke is nothing short of premium quality. The strength and flavor are exceptional, leaving no doubt that this is top-shelf cannabis. It’s a true connoisseur’s dream! Thank you again to Xpert Nutrients and Divine Seeds for making this grow so successful and enjoyable! We can’t wait for our next adventure with your products and genetics!

harvest soon

574.44 grams dry weight 3 plants. Some options are not showing for me to fill in such as dry weight and % of sativa compared to indica . To me 85% indica 15% Sativa. Nice plant definitely recommend, nice harvest weight