Just coming to the end of week 2 of flower will be upping the feed in this week ✌️☘️👽👩‍🚀

Día 41 (03/06) Riego 750 ml sólo H2O pH 6.2 Día 42 (04/06) Riego con 750 ml H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + CaMg-Boost 0,25 ml/I +TopBooster 0,2 ml/l - pH 6.2 Día 43 (05/06) Riego 750 ml sólo H2O pH 6.2 Día 44 (06/06) Riego con 750 ml H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + K-Boost 0,5 ml/l +TopBooster 0,2 ml/l - pH 6.2 NYC Sour D Auto está mostrando el tallo central y las ramas llenas de tricomas. Parece que algo muy interesante se avecina! Día 45 (07/06) Riego 750 ml sólo H2O pH 6.2 Día 46 (08/06) Riego con 750 ml H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + K-Boost 0,5 ml/l + CaMg-Boost 0,25 ml/I +TopBooster 0,2 ml/l - pH 6.2 Día 47 (09/06) Riego con 1 Litro H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + K-Boost 0,5 ml/l + CaMg-Boost 0,25 ml/I +TopBooster 0,2 ml/l - pH 6.2 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

Planta Madre en Conservacion Maximo 6 Meses mismos parametros de Nutrientes y Condiciones Esquejes Comienzan el Proceso de Enraizamiento 06/01/2025 Se comienza corte de ramas secundarias a planta madre, se realiza el procedimiento adecuado en corte, preparacion del tallo y aplicacion de hormona, se colocan en un domo germinador con ventilacion cerrada obscuridad total primeras 24hrs y se mantiene con humedad relativa de 90% y 20 y 26 grados Celcius.

Die LSD ist am BT 69 geerntet. Sie wird die nächsten 1-2 Wochen im Zelt trocknen. Die Pflanze an sich sieht cool aus und riecht gut, mal gespannt was die auf die Wage bringt. In der Blüte war sie ein paar Wochen unterdüngt. Kann man in der Blüte noch viel Stickstoff geben. Update:26g Topbud und 17g b flower. Minus ~3g zur verköstigung. Also kommen wir auf ca. 46g grob getrimmt.

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flowering day 22 since the time was changed to 12/12 h. Hi everyone :-) . This week she has had extreme growth :-). In the next 5-10 days she gets 1 g GHSC Powder Feeding to 1 l coco. It is poured every 2 days with 1.2 l per pouring. Otherwise everything was cleaned and refilled. Have fun with the update stay healthy . You can buy this Strain at : https://sweetseeds.es/de/cream-caramel/ Type: Cream Caramel ☝️🏼 Genetics: Blue Black x Maple Leaf Indica x White Rhino 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Bio Bizz Coco ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 .

8/11 should had did more defoliation feels like I’m bit late don’t want to stunt growth. But besides that frosty and no real amell

More humidity trouble this week, same old story lately. Added more circulation to the grow area which has been helping alot! I stopped feeding calmag and have fed 1.5g of pkbooster per 4L, gonna ramp up a bit more this week. I had some white fuzz mold on top of the soil of 2 girls, I let them dry out, scratched the surface up and watered and it didn't return which was awesome. Made me worry. A suggestion I got and was gonna use if it came back was feeding 20% milk 80% water, hasn't come to that yet. Hopefully over the week I can continue to decrease my humidity as my buds start to form! Till next week!

Almost done

Vegetation: To keep temperature and moisture on optimal levels at around 23°C / 65% I'm using two mechanical timers. - 24/7 on: Fans and water pumps (+Ventilation after 3.11.) - Timer 1: Lights and Humidifier 18h on / 6h off - Timer 2 (BROKEN 3.11.): Ventilation 18h (15min on / 15min off) / 6h off NOTES: Everything looks good and the roots have appeared from almost every (11/13) rock-wool cube. From now on I'll mostly water the plants from bottom by adding the wanted amount of nutrient solution on a plate, and then placing the plant on top of for ~15seconds This week I'm also starting to prepare the hydroponic systems (2x NFT-GT90, and 1x EBB-flow I think) and stronger nutrient solution since my plants are becoming ready to be transferred. Spreader-mat is the base of my plants when I have transferred them in to the hydroponic systems. DO NOT place more than one layer of the spreader-mat as it is not meant to be used like that! As you're cutting the mat for NFT's, be aware to have some extra for your peace to reach nutrient solution below the tray. That way you won't get noise from water dropping when systems are turned on. Day 15 (1.11.) Day 16 (2.11.) First watering with a bit stronger nutrient-solution (~ EC 0,6 / pH 5,9) than before, starting with 50ml/plant and watering once from above. Slowly increasing EC to 0,8. I cleaned and assembled 2 out of 3 hydroponic-systems which I'm going to use. I'll do the same also to the last system, but it currently has my plants on top of it so I'm going to do it later. I want to make sure that my plants have built healthy and big enough root system before transplanting to hydroponics. I'm waiting for the rock-wool cubes to be bursting of roots so they won't drown on their first day in hydro. Also, as the plants are bigger before the transplant, I'm able to fill my nutrient-solution tanks full with correct strength nutrient-solution for Mid-Vegetation from the start, therefore no need for that much adjusting later on. Day 17 (3.11.) I noticed my other timer which controls the lights had stopped working... The lights were on when they shouldn't have been, I noticed it an hour after they were supposed to turn off. I think I caught up to it early, but it may have been on for maximum of 2 days straight. No worries there since on vegetation-phase the plants don't necessarily need any sleep (Even though you should avoid quick changes like that!). Roots have appeared from the bottom of every cube and plants are looking pretty healthy. I think they are almost ready for hydroponics. Day 18 (4.11.) Few plants are showing symptoms of nutrient deficiences or some sort of sickness, not certain what exactly. I'll be keeping an eye on it. I'll be transferring in to hydroponic systems in maybe a week, so I don't want to stress my plants more than what's necessary. Increased my solution strength to 0,9 EC with a bit more Cal-Mag than before, and watered the plants for 50-150ml each plant depending on weight and size. I'll be slowly increasing the strength by around 50% during upcoming week. Thanks for tips! Day 19 (5.11.) Day 20 (6.11.) Plants are recovering well from deficiences and I just transferred all of them to hydroponics. I don't have the water pumps on for 24/7 just yet, at this point I water them a couple times a day by keeping the pumps on for somewhere around 15min at a time. Lights are now set to 60% and I also added a tower fan to circulate the air and shake the plants. Day 21 (7.11.) Lights are now set to 70% since the Led's and plants are spreaded wider in the tent than before. Distance to plants stays the same at 75cm.

Helloing👋🏻friends and visitors. Clones have been stretching reasonably. So far so good 😊 Feeding: Wed:8thNov 3L each with nuts ph'd 6.3 Sat:11thNov 2L each water only ph'd 6.4 ------------------/////-----/////----- Did some defoliation here and there and some more today as per last 2 pictures. Many Bud sites, this shall be an interesting sight when in full bloom😋 Clone#3 soil media still wet from Saturday's watering 🤔 Swapped her around with Clone#2 Will see if that changes anything.. i might have to add a fan pointing out that way far right of the GT Had same issue when growing my black buds🤔🤔🤔🤔🤔 That's it for now folks!! Thanks for stopping by, likes and comments are appreciated 😉 Keep on growin! Keep on tokin!!! 😙💨💨💨💨💨

Added nutrients to top off reservoirs everything looks good …I am content so far with testing will be dropping light schedule to 11 on 13 off to accelerate bud development hopefully shortening flowering time

Da die Orange Bud an zwei stellen angefangen hat hab ich beschlossen sie etwas früher zu ernten. Hätte bestimmt noch eine Woche stehen können aber von den Trichomen fand ich es schon in Ordnung.

Hey everyone 🤗. Today they were planted in their 11 L pots 😀. Now the root growth can really accelerate. When repotting, a total of 3 g per liter of Green House Powder Feeding Bio Grow was added to the Canna Coco 😊. That's enough for 8-10 weeks :-). I'm curious what they are doing this week and I wish you all a lot of fun with the update :-). Stay healthy and let it grow 🌱🍀 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Day 8 of Flowering, this babies are stretching hard and starting to show white pistils and i couldn't be happier! Even if the soil is pre fertilized i just added 0,5ml of Biomagno FiorituraOM to help the plants start flowering, as @Mangodudu said EC was only 1,2 it shouldn't get them overfert. The structure il very nice and the plants are vigorous and always with praying leaves, i defoliated pretty hard and fixed every branch to a bamboo stick, so they don't have to carry the weight of the buds in the next weeks and focus all the energies in the bulking up the buds. I also just lowered the lights to get some light stress and help the plants stretch harder, and the response was amazing they just doubled the size in this first week of flower, I'm also very happy with this canna plus pro soil, it takes the water and drys very fast it think it's thanks to all the cocco in it.

Updates coming

31.12.24: I have been readjusting the LST pegs and wire daily. Sometimes, twice a day! (I know, too much time on my hands)! 😆 The plants have responded fantastically! I'm so glad I gave it a go. Some plants have been a bit too tall, and I snapped Do-sì-dos P3, pulling the stem down. Audibly snapped 😬I let it be, though. It seems to have healed mostly, in only 2 days. I have increased the lighting to 70%. They're getting watered a few times a week, with 1 litre of Dechlorinated water, containing the following nutrients and additives; 1ml of Biobizz Bio-Grow, 1ml Biobizz Top Max, 1ml of Biobizz Bloom, 2ml of cal-mag, 1g of Ecothrive Biosys. The plants are responding well to this concoction, so it's all good so far. The leaves are looking greener and are getting darker. Will be monitoring to continue readjusting the LST ties. Also, to monitor the increased lighting level, to make sure they can handle that yet. 1.1.25: Happy New Year! I have continued to readjust the LST wire and plant pegs. Several times a day. Coincidence would have it, I have a 6ft tropical aquarium which was time for cleaning! I always water my Acer tree in the front yard with this water, with beautiful results 😍 👌 🍁 I decided to try it out in my indoor garden. I'll post photos of before and after to see the difference, good or bad 😅 3.1.25: Plants are doing very well, except for PPP3 I'm quite disappointed in that one, as I feel like it's wasting a space. I guess I'll have to keep it, along with the Do-sì-dos that I snapped twice, which refuses to die 😅 I started to lightly defoliate, which is difficult because I always get carried away with it. I'm going to water again with the nutrients in description of this week. Overall Pink Mist P3 is looking a little sparse, and training is difficult as the stem is harder and thicker than the other plants in the tent. Hoping to see some more growth this week! 4.1.25: Continuing to defoliate and adjust the LST pegs and wire. Watered today with 1ltr of dechlorinated water PH'd to 6.0. With the following nutrients;- 2ml Biobizz Bloom, 4ml Biobizz Bio-Grow, 2ml Cal-Mag, 2ml Ecothrive Flourish, 0.2 g/ltr of Ecothrive Biosys. I've increased the Nitrogen by adding double the amount of Biobizz Bio-Grow. I'm trying to keep them growing for as long as possible! I really want to keep the strength up and keep the leaves nice and lush green! 💚 Will update here with more photos and videos. Thanks for checking out my diary 🍃 ✌️

Day 49, She will be very large plant, did some heavy defoliation and trim some bottom steams as she was too bushy.