week 12 ill be flipping those plants tomorrow cant wait to harvest those nuggets they are gonna be huge 😀 lets cross fingers and hope for the best.day 1 of flowering i love my hortilux 1000 hps 😀 last day for week 12 im changing water tonight and onto week 13😀

2 of 3. 3rd one cracked in same paper cloth for testing but was a dud. 1 jack knifed like a long trailer truck so i had to dig it up and bend it twice in one day lol. 1 looking nice n hairy. Hope to get a more sativa fast growing structure than zkittzy mutant. *update* making this 1/3 canceled the craplato due slow growth.

4/30 one of the plants has actually visibly stretched more in the last 48 hrs. Starting to impress me with the pistols. Still way smaller than their projections online but whatever 🤷🏽‍♂️ 5/4 end of the week and I’m pretty okay with their size now 😂 they went through a sizable stretch. I’ll have to get my measuring tape back in the tent because each time I’m adding to this diary, I question whether I’m on the right week or not because they look like dwarfs compared to the end of the week

The temperatures, humidity, height, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil spread evenly across the top of the soil. Day 1 we had a high temperature of 79° with mostly cloudy skies. The nights have been dripping below 69°F, creating an ideal environment for powdery mildew. I watered about 3 gallons of well water. I treated with Arber biofungicide. Lady bugs were released and are having an aphid feast. Day 2 we had early morning rain followed by mostly cloudy skies. High temperature was 77. The rain took care of the watering today. I'm treating with arber again and more defoliation. Day 3 we had a high temperature of 81°F, skies were partly cloudy, and I watered 3-4 gallons from the hose. Day 4 we had a high temperature of 83° with sunny skies. I watered 4-5 gallons from the well. I removed leaves with powdery mildew and treated with Arber. Day 5 we had a high temperature of 88°F. Skies were clear and sunny. The humidity was around 90% today. I watered 4-5 gallons from the well. I treated with Arber again today. Day 6 we had high temperature of 89°F. Skies were sunny. I watered about 4-5 gallons with well water. I've been treating these with Arber biofungicide and it's had some good effect. I stripped all the infected leaves.I'll get the third tomorrow. I'll treat these tomorrow with growers ally fungicide and see how that does. Day 7 we had a high temperature of 86°F with partly cloudy skies. We're expecting rain tonight and it's super humid today. The weather is not cooperating while I'm treating for powdery mildew. This week was a success. The plants gained on average 3 inches in height. They've slowed down their upward growth and are transitioning into flower. The weather has been atrocious for cannabis. These girls are super healthy but the humidity and cool nights have caused perfect conditions for powdery mildew. I began treatment with Arber biofungicide and it's working pretty good. I'm switching now and will treat late day 7 with Growers Ally fungicide. I removed the infected leaves and defoliated to help light penetration.

🌸 Flowering Week 2 — PM Battle & Bloom Progress Week 2 of flower and the girls are stacking up beautifully 🌿🔥. The stretch continued strong — canopy looks full and healthy under the Spider Farmer G3000 💡. Bud sites are now clearly forming, and the structure is holding firm after earlier LST training. This week I continued powdery mildew treatment — used Hydrogen Peroxide 3% (H₂O₂) spray about 3 times since it first appeared. Most spots are gone, only a few tiny areas left. I’ve been keeping RH low and airflow strong with clip fans and the new dehumidifier running 24/7 🌬️💧. Feed mix (per L): • Corex 1 ml/L • CalMag 1 ml/L • Mira 0.5 ml/L (pH adjust) • Florex 1 ml/L • Aurora 1 ml/L • Bud Candy 2 ml/L • Terpinator 5 ml/gal (~1.3 ml/L) • Eldex 1 ml/L 💧 Watered around 15L total with 10–20% runoff, ppm ~1500–1600 @ pH 6.0. Switched to pure RO water this week for cleaner feed and better control of mineral balance 🙌. 🌡️ Temps: 26–28 °C (day) / 23 °C (night) 💧 RH: 50–55% (after dehumidifier setup) 📝 Observation: PM almost gone — continuing light H₂O₂ misting until it’s fully cleared. Stretch slowing down, early flowers forming nicely 💪. 💡 Tip: For growers in Thailand — using an RO system helps stabilize ppm and pH in local water, especially if tap or street refill water fluctuates a lot. Excited to see the flowers bulk up in Week 3 — hoping for a clean, healthy canopy ahead 🌸✨

This week was very well, the girl showed her first pistils and she's stronger and healthier than ever, so: Day 30 sprayed with bioprotect Day 31 watered with 3l of water with 6 ml of bh, bg an a-v Day 33 The first pistils are appearing sign that blooming phase has begun. Day 34 water with the mix Day 35 I've turned on the dehumidifier trying to decrease the humidity and starting to defoliated some lower leaves, 3/4 leaves per day stress the plant to much. See you next week Happy growing

Did a full on defoliation in the beginning of the week

Cut down wet weight 721 g :)))))) Bottom half to do in a week or two:)))) will up date all in harvested week first weigh in 165 g :))))

Hallo everybody due the holidays I was t home at all and a friend jumped in for me to look after her !! She got feedet 2ise not to sure witch days , just plain water ph6.5 ec 0.35 Day 21. - 05.01.2020 Came home yesterday and transplanted the nicely growing plant in a 12 l pod with light mix soil In the next days i gona start training her again have to prepare the pod for that tho !! Iam gonna give a good feed to her in the neExt couple of days to strengthen the grow a bit and I think in a week or two she’s gona be ready to get in the bloom box !! Day 24 - 08.01.2020 Plant is growing nicely after getting trained for a few days and gave her a bit of a feed nothing to heavy tho !!

As she gets closer to the end these fat dense buds are filling out with a ton of trichomes that are so beautiful some almost look purple when the light hits just right. I can’t wait to try this bud out I’ve been so impatient about this cause it looks so good stay tuned for the chop soon only 2 more weeks! Fed FloraFlex B1 B2 3.0ec 6.0ph No Cal-Mag

**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8

flush time.

Hey Growfam! Week 10 is over and there's not much going on since the flush on day 60. They got some more plain water with ph6.3 but not much. Afghan Skunk 1 Harvested on day 63 and is hanging to dry in one piece. Waiting for the other Afghan Skunk to mature before posting the harvest pictures of both. Afghan Skunk 2 This lady really is in no hurry to finish! Trichomes are half clear half cloudy... She faded a lot during the last week and is also getting those reddish/violet hues, like AS1. Somango Glue 1 More than ready for the chop. All trychomes are cloudy with some amber. Will take her down tomorrow or so. Somango Glue 2 Also pretty much ready for harvest, although not as mature as I like. Trichomes are mostly cloudy with just a few turning amber. These 3 remaining girls all have to go down soon. Maybe I'll harvest both Somango Glue tomorrow and leave the other Afghan Skunk standing in the dark for a day or two before taking her down as well. That way I can use the tent for drying whilst giving the other plant a little more time to mature. Probably this won't make much difference lol 😅 But I definitely need the tent to dry - Afghan Skunk 1 has been stinking up my place proper!! Thanks for looking! Happy growing! Deelicious

16.04.2024 Continue into week 7 Replaced all filters in the system and cleaned them. Mixed a new batch with the following components: 56ml AN Connoisseur Bloom A+B Total volume: 34 liters Electrical Conductivity (EC): 1.1 Target EC for this week: 1.0-1.1. Adjustments will be based on plant observations. Performed one long misting session (3 minutes). Environmental Conditions: Outside temperatures going down, today is raining but this week is lower in temperatures Smallest Wedding Cheesecake: Great bud development, already buds are hard and juicy. Exceptional odors Tropicana Cookies: Phenomenal strain; One girl is going to finish before 8 weeks Purple Lemonade: Tall plants, think ist finish flowering the last Lighting Parameters: PAR Map: Maximum PPFD is 850, minimum PPFD is 600. VPD: Ranges from -1.2 to -1.3. Daytime Temperature (DT): 24-25°C. Nighttime Temperature (NT): 20-21°C. Leaf Temperature: 22-23°C. Light Distance: 45-55 cm from the plants. CO2 Levels: 700+ ppm. HLG Scorpion Diablo: Set at 60%, positioned at a 45-55 cm distance. Daytime: ON for 70 seconds, followed by 25 minutes OFF. Nighttime: OFF for 70 seconds, followed by 35 minutes OFF. Nutrient Tank (NT): pH: Maintained between 5.90 and 6.10. EC: 1.20. Temperature: 20-21°C 18.04.2024 Mixed a 15-liter solution with 20+30ml AN Connoisseur AB . The liquid temperature is 18.8°C. Replaced all filters in the system and cleaned them The outside temperature getting lower this days. Its help a lot to maintain temps in grow box I hope, as per the forecast, temperature will remain low during the upcoming week. The ladies are looking fantastic. Purple Lemonade is slowest on flowering but i think it will be rewarding to wait Tropicana Cookies are racing toward harvest; . Lighting Parameters: PAR Map: Maximum PPFD is 900, minimum PPFD is 650. VPD: Ranges from -1.2 to -1.3. Daytime Temperature (DT): 23-24°C. Nighttime Temperature (NT): 20°C. Leaf Temperature: 22°C. Light Distance: 45-55 cm from the plants. CO2 Levels: 700+ ppm. HLG Scorpion Diablo: Set at 70%, positioned at a 45-55 cm distance. Misting Schedule: Daytime: ON for 70 seconds, followed by 25 minutes OFF. Nighttime: OFF for 70 seconds, followed by 35 minutes OFF. Nutrient Tank (NT): pH: Maintained between 5.90 and 6.10. EC: 1.1. Temperature: 20-21°C 20.04.2024 Today, we had a storm accompanied by a power outage. Nothing serious, just a few hours. The temperature and humidity remained within appropriate values. Upon the return of power, the DH48-S relay timer, which controls irrigation, failed again. This has happened for the third time in the last 4 months. Unfortunately, I couldn’t react immediately, so the ladies were without water again for a few hours. I’ve ordered a TrolMaster program device and additional sensors AMP-3 for pH, EC and humidity, and temperature control. No more messing around! Water consumption is gradually decreasing, and electrical conductivity of the water is slowly rising. I’m starting to reduce the strength of the nutrient solution. Each subsequent tank refill will be at approximately 1.0EC. The outdoor temperature is still cooler; let’s hope it stays that way for another week or two! 🌱❄️ Mixed a 15-liter solution with 25+25ml AN Connoisseur AB . The liquid temperature is 18.8°C. Replaced all filters in the system and cleaned them Lighting Parameters: PAR Map: Maximum PPFD is 900, minimum PPFD is 650. VPD: Ranges from -1.2 to -1.3. Daytime Temperature (DT): 23-24°C. Nighttime Temperature (NT): 20°C. Leaf Temperature: 22°C. Light Distance: 45-55 cm from the plants. CO2 Levels: 700+ ppm. HLG Scorpion Diablo: Set at 70%, positioned at a 45-55 cm distance. Misting Schedule: Daytime: ON for 70 seconds, followed by 25 minutes OFF. Nighttime: OFF for 70 seconds, followed by 35 minutes OFF. Nutrient Tank (NT): pH: Maintained between 5.90 and 6.10. EC: 1.12 Temperature: 20-21°C 22.04.2024 Tropicana Cookies is the only one that got scars in the form of slightly burnt leaf tips. It’s not too severe; due to the lack of water, some mineral residue remained directly at the root. All in all, it could have been worse. I hope the timer won’t deceive me again until my TrolMaster program device arrives. One Tropicana Cookies and one Wedding Cheesecake will finish during the next week, so I’ll slowly start preparing them for harvest. Purple Lemonade and one Wedding Cheesecake will continue flowering into the ninth week, but they’ll be the largest ladies in this batch. All the ladies look and smell fantastic, and the buds are already firm to the touch, especially the Wedding Cheesecake. Starting tomorrow, I’ll gradually reduce the nutrient strength and light intensity. I’ll make an effort to keep the temperature around 23-24°C. Lighting Parameters: PAR Map: Maximum PPFD is 900, minimum PPFD is 650. VPD: Ranges from -1.2 - 1.25 Daytime Temperature (DT): 23-24°C. Nighttime Temperature (NT): 20°C. Leaf Temperature: 21°C. Light Distance: 45-55 cm from the plants. CO2 Levels: 700+ ppm. HLG Scorpion Diablo: Set at 75%, positioned at a 45-55 cm distance. Misting Schedule: Daytime: ON for 70 seconds, followed by 25 minutes OFF. Nighttime: OFF for 70 seconds, followed by 35 minutes OFF. Nutrient Tank (NT): pH: Maintained between 5.90 and 6.15. EC: 1.14 Temperature: 20-21°C Week 7 off Flowering in Summary 105 litter off RO water, 150ml+1800ml AN connoisseur A+B 53kW electricity in total for light, Pumps and AC Infinity Fans. 51kW for Light + 1kW Dehumidification + AC Infinity ventilation Week start @ 1.21EC, nutrient strength., keep strength @ 1.1-1.2 till the end of the week Tropicana Cookies is gonna be harvested next week!! Also think one Wedding Cheesecake is waiting harvest in next week PH was stabile and move from 5.90 min to 6.2 max. From end off the week PH is start to dropping Light distance for this week - 50-55cm from tallest top , PPFD levels around 900 in center, trough whole week. Lowest reading 680 @ corner Temperature are from 20c at start off day to 24.5c max at some points. Night temps around 19.5-20c. Outside humidity is generally low This week i have DH48-S timer failure, third time in this month. Ordered TrolMaster program device for that Day RH is moved from 45% to 55% max, at night times drop to 45-48% Continue in next week, lowering temperatures, EC strength and humidity Lighting Parameters: PAR Map: Maximum PPFD is 900, minimum PPFD is 650. VPD: Ranges from -1.2 to -1.3. Daytime Temperature (DT): 24.5°C. Nighttime Temperature (NT): 20°C. Leaf Temperature: 22°C. Light Distance: 45-55 cm from the plants. CO2 Levels: 700+ ppm. HLG Scorpion Diablo: Set at 70%, positioned at a 45-55 cm distance. Daytime: ON for 70 seconds, followed by 25 minutes OFF. Nighttime: OFF for 70 seconds, followed by 35 minutes OFF. Nutrient Tank (NT): pH: Maintained between 5.8 and 6.1 EC: 1.1 - 1.20. Temperature: 20-21°C