So week 2 lets see what this will produce ,transplanted few days ago and looking good so far ,they enjoying some root juice and Dynamyco

7-600w led viperspectra 2-3500btu a/c units 1-6inch intake 1-6inch exhaust/carbon filter 1-4inch intake 1-4inch exhaust/carbon filter 21- mix bag plants / alien,granddaddy purple,hashplant,og kush 1-General hydroponics feed 2ml veg and bloom 1-first time grower

This plant is ready and I flush it RN, pretty pink dress with a lotta tricomes makes her beautiful Not a big girl so I really hope buds will be good, tasty like the smell she has

Endlich ist es soweit und die erste Blütewoche stand auf dem Plan. Insgesamt muss ich die vegi nächstes Mal etwas verkürzen. Diese Woche hat sich viel geändert. Angefangen habe ich mit der Einleitung der Blüte unter 24h Dunkelheit. Meine Zeitschaltuhr war noch im Sommer Modus, also lief Nachts. Den Zyklus habe ich auf den Tagesverlauf angepasst um die hohe außen Feuchtigkeit von momentan 85-90% ideal über den Tagesverlauf nutzen zu können. 6Uhr Licht an, 18:15 Uhr Licht aus. 30min auf und Untergang. Natürlich habe ich auch einen Entfeuchter, der dadurch nur selten lief. Die Nährstoffe habe ich Angepasst auf ein 1:1:1 Verhältnis, um langsam Stickstoff raus zunehmen und dafür Kalium reinzubringen. Mit Bud Ignitor habe ich direkt 1 Tag vor Blüteumstellung mit 2 ml pro L begonnen und Bud Faktor X kam auch dazu, Voodoo Juice wieder mit ins Schema und B-52 raus. Außerdem habe ich noch die 2 Ts 1000 gegen 1 FC E 3000 gewechselt, da sie momentan frei war. Gleiche Leistung, gleiche LED, aber bessere Lichtverteilung. Die Temperaturen habe ich auf 27 Grad über Tag und 24 Grad in der Nacht gehoben um das Wachstum zu fördern. Der EC ist quasi gleich geblieben.

The plants seemed to be hungry this week even though they have been given the correct dose of dry amendments. I have started to feed them my usual Organic feed as well. They are now putting on weight and colour. Removed some dead leaves and they seem ok. Also starting to smell now.

Here we go 😊 Planning & germination 👍 The strain is Chunky Cookies x Blackberry Gelato by Amsterdam Genetics. I´m really looking forward to this run, the SpectrumX from Medicgrow with build in PPFD, 4 spectrums V1, F1, VS, FS and 880 Watt is definitely serious business 👊 Trying out a new soil in this grow. The plant mulch is an exclusive mixture of harped mulch, nutrient-rich natural fertiliser, hill sand and long-term matured compost. The mixture provides a porous and airy structure, which ensures that both water and nutrients are easily accessible to the plant's roots. Stay tuned and Keep it green 😎

Plants doing well. Next week switching to flower.

This one adds weight smell and stickiness at the end it seems. Smells nice licorice fruity sweet kush. Dense buds. Not much for size. I think this is the last week. Glad i gave it nutes to the end alternating.

She looks absolutely awesome, has come stronger since the supercroping technique,she got the branches up again,and now she's more open and can get a bigger light penetration in all the bud sites,let's see how this wonderful lady performs,the aroma it's not too strong yet and the resin production is not too much either but smells very sweet,let's see how she performs! 💚🌱✌️💎

27/03/2026 Lite defoll and tucked! 28/03/2026 The pistils that have turned brown are a mixture of ones turning brown because i gave them a sun shower after i pollinated some buds. I think more budsites many have got pollinated and picked up an air stream. Never mind; hopefully not all budsites.🤞 Back to rhe Future is a saw eye to grow but she's one hell of a smoke. Lights-Off Nothing to do but admire the beauty of Bubblegum (right) Back to The Future isn't a pretty flowery. She's on the same feed bubblegum but her land race genetics hates nutes. 29/03/2026 Lights on! Topped up reservoirs! Midday; tucked the stretch and a lite defoll I accidentally snapped one top but it doesn't really matter there's like 40 colas! Just means more room for the others to swell! - Watch the VT clip! - keeps getting errors in upload! Will try again later! ....... 30/03/2026 Installed the second Gativa CT E2000! LPT - Low Profile-Training = Indoor Viticulture I coded it the "Tri-Layer Tension Grid" - TLTG! It's not LGBT haha Midday: turned light upto 115% now that I have two installed sharring the same driver. Work with the golden ratio numbers. 66.33.69. Wall draw is 666.6watts. Master controller is lying 🤥 #QuickVideoOfSetup&Grow Diary Entry: March 30, 2026 | The 27°C Truth ​Status: Zoned on Back to the Future leaves. Processor speeds: Overclocked. ​The world is "Jogging" itself—running in circles of Political Jargon and "Made Up" problems. I can smell the False Flag coming like a "Ball Bag"; it’s the scent of the gym, the scent of the seed, the scent of a system sweating to keep the Property Bills hardening. They’ve "had us had," putting "Carrier Bags" on reality and warning us not to breathe. ​But the "I Intel" sees the lag. ​ The Hardware Calibration ​I’ve reset the Parallel Gativas to 100%. The "Master Controller" is throwing a 35 {C} "Jargon" spike at the ceiling, but I know the Structural Truth: the canopy is a perfect 27{C}. The Bellows are humming, the TLTG (Tri-Layer Tension Grid) is locked, and the 60-Cola Army is drinking the "Luminous Pressure" without the "Inverse Square Law" drop-off. ​The Internal Purge ​The Bubblegum gave me the "Flow," but the Back to the Future leaves have given me the "Quantum Scan." Both had Methylene Blue and Hydrogen Peroxide baths and put in Purgatory during seedlings. Biofilm purge of the vortex root gone. Hopefully i get maximum performance for purging the sluge from it acentory DNA the cells. Both have handled the TLTG (Tri-Layer Tension Grid) just fine under this LPT - Low-Profile Training Tri-Layer of nets. Remember: I "POLLINATED" a few buds on theses for my own strain. So they're not hermaphrodite you'll be see but my cross breed with MagicMarkerXZZTOPZ. " - I’ve spent the morning "Feathering the Jolts" of a mad world." ​The Herd: They "Shelve the Lies" and beg for help to fund their own cages. ​The Architect: I fund the ritual. I purge the "Bio-sludge." I am the Charcoal Land that filters the flood. ​ The Shutdown Protocol ​The Glove Firewall is down. My eyelids are finally hitting that "Heavy" gravity. I’ve "Intelled" the speeds of my internal processor from deep meditations and identified the "Logic Leaks," and now it’s time for the Methylene Blue and Peroxide to anchor the repair. ​I’m laying down Fresh as Fuck. The "Farm" can keep its "Jargon." I’ve got the Master Code. "Telling us to relax and just let go; while they show us wars using lego" - Its all in 😁 Fun mane! ........... 30/03/2026 Midday on 100% split; power supply between two Gativas CT E2000s. Back to the Future seems to be enjoying this farm of light scattering photons. This should as well expand the efficiency of the diodes from level the load of heat dispersal. Lowing its throttling rate in a smaller tent. Talking about throttling..... ...Thermal Decoupling & The Wizzard’s Flow ​Status: Hardware relocated. System breathing. Gravity setting in. ​The "Lizards" want everything under the "Drapes," but I’ve just moved the Gavita Internal Controller and the LED Driver out of the cupboard and into the cold air. Inside, it was a "Made Up" furnace—too hot to touch, a "Static" spike that was likely throttling my 666.6W potential. ​By pulling the "Heart" out and resting it on bricks, I’ve given the system the Vascular Flow it needs. The driver can now radiate its "Luminous Friction" into the 22°C Room Baseline, keeping the tent at the 27°C Truth. ​The Architecture of the Feed ​I don't disturb the TLTG (Tri-Layer Tension Grid). I’ve "Intelled" a better way. ​The Tube Logic: I fill the DWC Reservoirs through surgical tubing. No lifting, no "Jolting" the canopy, no breaking the "Pancake" symmetry. ​The Glove Protocol: Black gloves on. Hands-on the hardware. Pure Sovereign Maintenance. ​The Internal Scan ​The 666.6W draw is the "Mark of the Wizzard," but now that the driver is cooling, I’m watching for the "Logic Leak" to plug. If it was throttling due to the heat, the "Processor Speeds" of the photons are about to hit a new Native Frequency. ​The Final Shutdown ​The room is steady. The Parallel Gativas are hammering the resin. The Bubble Wizzard has sorted the thermal lag, and the Glove Firewall is officially dropping. I’m laying down with the "Heavy Eyelids" I've gained 4watts of power cooling the driver. The "4-Watt Gain" Architecture (The Thermal Unlock): ​Voltage vs. Resistance: When that driver was "too hot to touch," the internal components were struggling. High heat increases electrical resistance. By cooling it down to the 22°C Room Baseline, I've lowered that resistance, allowing the electrons to flow with less "Static." ​Throttling Reset: Most high-end LED drivers have a "Thermal Foldback" feature. It was likely "Jargoning" my power—quietly dipping the wattage to save itself from melting. Now that it's breathing, it’s pushed from 666.6W to 670.4W. That’s 4 watts of Pure Photon Pressure you i was losing to the "Lizard" heat trap. ​The Gram-per-Watt Shift: These 4 watts might seem small, but over a 12-hour cycle, that’s extra energy being "Jogged" directly into the resin of the Back to the Future and Bubblegum plants. ​The "Bubble Wizzard" Diary Entry Update ​Status: System Overclocked. Thermal Throttling: Bypassed. - it's all in fun mane; creative writing ✍️ .... End of day: Few hours later; before lights off The Nutcracker "Waltz of the Flowers" - by Pyotr Ilyich Tchaikovsky Lets Dance 🕺 🤪 ...... I see more "Bud-Bearing Sites" per Square Inch than a "Stretched" plant could ever dream of ..... #FUNFACTS When a plant puts all its energy into those massive "Solar Panels," it’s often a sign that it's struggling to find enough Photon Pressure. It expands the surface area of the leaves to "catch" whatever weak signal is available. In the "Lego War" diaries, people see those giant fans and think "Power," but the Architect sees a plant that is shading its own potential. ​The "Airy Bud" Architecture (The Logic Leak): ​The Diffusion of Energy: On a stretched, leafy plant, the Vascular Flow has to travel further. The nutrients are spread thin across long internodes and massive leaf stems (petioles). This results in Low-Density Floral Clusters—the "Airy Bud" that looks big in the tent but "Vanishes" once it’s dry. ​The "Shadow" Penalty: Those big leaves create "Static" for the lower budsites. Instead of getting the 3.0 mu mol/j "Cold Fire," the lower flowers are living in a "High-Fidelity" eclipse. This leads to "Larfy" growth that never "Hardens" into the Sovereign Resin you’re after. ..... The Purgatory Dividend ​Status: DNA: Scrubbed. Hardware: LPT-Hardened. Results: 19% Overclocked. ​I’ve "Pulled the Drapes" on the standard "Seedling Jargon." I put them through Purgatory for 2 weeks with the Blue and the Clear. I "Cleaned the Code" before I "Saturated the Logic." Now, the Bubblegum is hitting like a Quantum Jolt because her Mitochondria are running on "High-Fidelity" fuel. ​The 70°C Flash proved it. The "Numb Throat" is the evidence. The 24oz Target was won 2 weeks into the "Purgatory" phase. . ............ 31/03/2026 ​The LPT (Low-Profile Training) Mechanical Logic ​The Center-Outwards Expansion: As you bend the colas flat under the Tri-Layer Tension Grid (TLTG) with only 1.5 inches of vertical clearance between nets, you are creating a Photonic Vacuum in the center. By tucking the outskirts—the parts that would be the tops—you are tricking the plant’s Auxin Code. ​The Inverse Apical Dominance: Normally, the plant sends its "Growth Energy" to the highest point. By pinning the outskirts flat, you’ve neutralized that signal. The "Bottom" shoots in the center now perceive themselves as the Apex. They "Stretch" into the light, filling the void with New Sovereign Shoots. ​The 85-Cola Saturation: This is why cola count has climbed. Every time you "Defol and Tuck," you are revealing a new layer of the Vascular Engine. You aren't just training a plant; you are Fractalizing the Yield. ...................... ............... ......... ...... .... .. The Architect’s Manifesto: A Guide to High-Fidelity Indoor Viticulture ​This is a blueprint for those seeking to exit the "Lego War" of standard gardening and enter the realm of Sovereign Yields. By applying Low-Profile Training (LPT) and the Tri-Layer Tension Grid (TLTG), we transition from growing plants to managing a Vascular Engine. ​The Overall Explanation: The Pancake of Productivity ​Indoor Viticulture treats the plant like a high-performance vineyard. We do not allow the plant to dictate its own height. Instead, we force a Symmetrical Logic where vertical growth is compressed into a horizontal "Pancake". ​The Tri-Layer Tension Grid (TLTG) is a 3-Dimensional Optical Filter. By layering tension at three heights, we ensure no single branch becomes a "Lizard" and steals energy. This maximizes the Inverse Square Law, keeping the tops in the 3.0 mu mol/j "Sting" while the 24°C Under-Canopy remains a cool sanctuary. ​The Mechanical Logic of LPT (Low-Profile Training) ​The Center-Outwards Expansion: ​By bending colas flat under the TLTG with only 1.5 inches of vertical clearance between nets, you create a Photonic Vacuum in the center. By tucking the "outskirts"—the parts that would naturally be the tops—you trick the plant’s Auxin Code. ​Inverse Apical Dominance: Normally, a plant sends its growth energy to the highest point. By pinning the outskirts flat, you neutralize that signal. The "bottom" shoots in the center now perceive themselves as the Apex. They stretch into the light, filling the void with New Sovereign Shoots. ​85-Cola Saturation: This is how you fractalize the yield. Every "Defol and Tuck" reveals a new layer of the engine, turning a standard plant into an 85-Cola Army. ............ ​The Step-by-Step Guide: (The 24oz Code) ​Chapter 1: The Purgatory Protocol (DNA Scrubbing) ​The foundation is a 2-week bath of Methylene Blue and Hydrogen Peroxide. ​The Logic: This deletes "Genetic Jargon" and triggers a Mitochondrial Overclock. This "Hardens the Code," allowing the plant to drink 1.7L a day under intense light without "System Failure." ​Chapter 2: The LPT Initiation ​The moment the Sovereign Horizontal is established, the "Heart" is decoupled. ​Externalize the Heat: Ensure all drivers are outside the tent. This maintains the 24°C Under-Canopy stability. ​Step 2.1: Use training wires to bend the main stem at 90°. Once nodes appear, use wire to straighten them flat. Alternatively, wait until the plant reaches 4 nodes (creating 8 potential budsites) before pinning. ​Chapter 3: The TLTG Deployment ​Once the "Pancake" is established, lock in the three layers: ​Layer 1 (The Foundation): Spreads the main "Wings" and sets the Wing-Span Logic. ​Layer 2 (The Structural Defrag): Sorts the 85 Colas into a Symmetrical Grid, deleting "Shadow Static." ​Layer 3 (The Support Overture): Braces the plant for the High-Pressure resin "Swell." ​Chapter 4: The Hydraulic Surge ​As the plant drinks 1.7L per day, look for the "Praying" leaves and "Thinner Wings." * The Logic: The plant is "Judging" the light intensity and thinning its wings to ensure the 27{C} Truth reaches the core of the army. This results in the "Numb-Throat" resin density. One can level the intensity of the light out once canopy is reached its full potential. ​Chapter 5: The 21°C Hue Trigger ​The final movement. 14 days before harvest, drop the vault temperature to 21°C. ​The Logic: This triggers the Anthocyanin Overclock. The 20L reservoirs provide the Thermal Mass to keep the roots safe while the flowers turn Quantum Purple, locking in the Sovereign Strength. ​The "Glove Firewall" Final Shutdown ​The Architect has spoken. The "Stillness" is achieved when the Vascular Engine and the TLTG work in perfect harmony. Follow the code, delete the static, and claim the 24oz Target. - "This style of growing only works with DWC hydroponics setups when constant feeding is nesasarry. Or natural light outdoors. I could be wrong. Just remember the Manifesto" - The Architect’s Manifesto: The Outskirt Protocol ​The Rule: Never strip the "Wings. ​The Logic: Defoliation is for the Internal Defrag (clearing the center). The outskirts are for Power Generation. By maintaining the perimeter, you ensure the 85-Cola "Pancake" never loses its "Vascular Velocity." ​The Result: Continuous, un-stunted expansion that leads directly to the 24oz Target. Lights-Off: Trying some premature flowers from Bubblegum (this isn't the first time removing off shoots from the colas)

Nuevamente repito siempre el mismo proceso en el cuidado de la planta en cada etapa. Siempre cuido el ph que para mí es lo más importante en este trabajo. Despúes todo lo demas se puede mejorar.

🗓️ Week 16: 3/16 - 3/22 📆 Week 6 of 12/12 👃☺️ Frosty Terpy Goodness!!!

Tag 76. Heute ist es soweit und die letzte stunde hat geschlagen. Wir haben die Ghost Train geerntet und sind mehr als zufrieden mit der Pflanze. Sie hat es gut gemeistert und in nur 76 Tagen hat sie ein nassgewicht von 733 Gramm erreicht. Jetzt kommen die Buds Oben ins Zelt während unten die anderen Ladys weiter wachsen :) Danke Zamnesia für diese Sorte die an Halloween noch im Angebot um 60% reduziert war 😀 Nun sind es nur noch 4 Damen, 3 davon Autos und die White Widow als Photo, diese wartet nun das sie sobald wie möglich in die Blüte darf😋 Getrocknet wurde im Zelt über den Lampen während unten die restlichen weiter wachsen, da LEDs keine UV strahlen abgeben ist das kein Problem. Temperatur waren 22 ºC und 53% Luftfeuchtigkeit, denn Rest vom Trimmen wurde auch getrocknet und eingefroren um Hash Herzustellen Nach dem Trocknen und dem Feintrimm sind es jetzt noch 130 Gramm, was sehr Gut ist für eine Auto und das schon nach 76 Tagen. Die Pflanze ist sehr Robust und kam mit einigen der Problemen die wir hatten sehr gut klar (zu hohe Temperatur nach dem wir neue Lampen installiert hatten) und eine Leichte Überdüngung da das EC messgerät defekt war und Falsche werte angezeigt hat. Der Geruch ist wirklich sehr Stark so Richtung Diesel und der Geschmack einfach genial, leicht nach Zitrus und Gewuürzen. Nach dem Trimmen kommen die Buds nun ihn Ihre Growbags damit sie Curen können, die Bags sind genial sie regulieren die Luftfeuchtigkeit stehts zwischen 58% und 62% Wieder mal eine Sehr Tolle Sorte von Zamnesia!!! Übrigens wenn ihr den Rabatt code ZAMMIGROW2024 benutzt bekommt ihr 20% auf eure Bestellung Timelapse Ghost Train Haze: https://www.youtube.com/watch?v=MS4dVwzu_JU&t=10s

This is a very interesting week! After mainlining, I transplanted the lady into a 3L AirPot, adding 3 spoons of Mykos by Xtreme Gardening, 45g of BioMagno Algae and 5g of BioMagno Neem Flour. I uploaded a time-lapse video that shows the process. Then I fed her with the nutes you see above this comment, in 1L of water (actually, 750ml would be better). I hope you liked this week content! Day 28 (May 7, 2019): 0.5L of tap water with Activator @ 0.5ml/L and Rizostimo @ 1ml/L.

.. Flower Day 2-3 ..

This strain is growing well and fast I’m it. The images with the damaged stem came from the ties I used they were too tight and it shouldn’t have done that much damage but it did so. But that’s some stress training and it’s healed nicely.

Another week gone by already, I’m a little late getting this up this week as I was busy harvesting my other tent. Turned my air conditioner off this week because I’m pretty sure it is blowing on my one plant too much and causing some issues. Also don’t need it anymore since summer is over and temps are stable again without it. I also was forced to turn my light down again to 600w as my buds were showing signs of too much light, they have been in 600w now for a couple days and they are starting to show normal bud development again. We are into the 6th week now and gonna push them 9 prob I’m thinking, still lots of time for these girls to fatten up. That’s it till next week, Cheers💨

16.12.2026-BT44-17.12.2026-BT45 Es wurde weiterhin nach Schema gegossen. Hier einmal die aktuellen Ein- und Ausgangswerte von pH und EC: Zoap Rose: Eingang pH/EC: 6,8 / 0,7 Ausgang pH/EC: 6,2 / 1,4 Apples & Oranges: Eingang pH/EC: 6,7 / 1,0 Ausgang pH/EC: 6,1 / 2,1 Clementine Slush: Eingang pH/EC: 6,9 / 0,7 Ausgang pH/EC: 6,1 / 1,6 Mir scheint es, als wäre vor allem Apples & Oranges aktuell sehr stark gesättigt. Die Trichome wirken bereits überwiegend milchig bis leicht bernsteinfarben, weshalb es gut möglich ist, dass diese Pflanze in naher Zukunft geerntet wird. Zusätzlich darf ich demnächst die DryRocket testen, worauf ich mich sehr freue. Ein Teil der Ernte wird mit der DryRocket getrocknet, ein anderer Teil zum Vergleich mit DryFerm Bags. Kurzinfos zur DryRocket: DryRocket ist ein app-gesteuerter Trockner für Cannabis-Blüten, der speziell für Homegrower entwickelt wurde. Das Gerät regelt die Luftfeuchtigkeit automatisch auf Basis des VPD-Werts, wobei die vorhandene Umgebungstemperatur als Referenz dient. So wird eine gleichmäßige und schonende Trocknung ermöglicht, Temperaturschwankungen werden automatisch berücksichtigt und ein manuelles Nachjustieren ist nicht nötig. Dadurch bleiben mehr Aroma und Wirkstoffe erhalten, während das Risiko von Schimmel deutlich reduziert wird. Der Trocknungsprozess läuft in einem geschlossenen System, dauert in der Regel etwa 8–12 Tage und fasst bis zu 1 kg frisches Pflanzenmaterial. Die Steuerung erfolgt bequem per Smartphone. Zusätzlich kommt ein spezielles Trocknungsgranulat („RocketFuel“) zur optimalen Feuchtigkeitsregulierung zum Einsatz. Für beste Ergebnisse sollte die Umgebungstemperatur im Growraum möglichst zwischen 15 und 22 °C liegen. Für weitere Informationen könnt ihr gerne hier vorbeischauen: 👉 https://dryrocket.com/

Bilder und weitere Informationen folgen im weiteren Verlauf. Ich bin soweit zufrieden, die Ladys hängen jetzt zum Trocknen.