Having cal mag issues going to hit the grow store tomorrow am and see can I get some organic cal mag and see if that helps other than that no real issues 2/24 I’m going sit my dumb ass down and chill I did a defoliation and man I over did it I think it’s pretty aggressive and i don’t know what I was thinking I was just clipping away 🤦🏾‍♂️…… anyway got some calmag for the color issues only going 1/2 tsp see how that goes hopefully when the new growth and more stretch happens it’ll look a lot better I’m also bottom feeding the calmag hope that works too

Day 35 - few pics and vids..... everything going along nicely 👍 This is a pretty big update, so i'll add to it over the next few days, as i finish building it all.... i'm building these 2 x SS haze, the full tent, just finishing up the setup..... trimming them, changing solutions to 12/12 and flower..... changed the exhaust fan and filter setup to the better outside the tent method.... and installed 12v CPU computer fan, lol ("alta9" fits in 4in ducting perfectly), drops wattage on extractor fan.... 10w tops... got a few kg of active carbon and making/replacing the carbon filter .... i'll add afew vids of the new setup in afew days... Day 36 - few pics/vid of new tent setup...... "alta 9" fan :) post tomorrow after i finish trimmin and settin up night mode etc...... and into tomorrow we go, lol ... Day 37.... slowly getting there..... little bit more to go... this should make things abit more interesting..... right tank (short babie) has : 19 lts of tap water @18oC + 150 ml -dutch master one gold FLOWER.... 6.4 PH - 1400 PPM left tank has : 19 lts of tap water @18oC + 50 ml of elements a and 50ml of b and 10 ml of nitro and 20ml of Crystalic (molasses/pot) .... 6.5 PH - 1200 PPM more pics / vids of the finished tent setup.... roots, transfer, etc... Day 37 is alot of vids of the clean and change to flower..... edit - day after build noticed left tank (nutrifield) not enough bubbles..... pulled out the 4 air pump and swapped to the 2 x original oxipumps... much better, also to fix the problem with ph goin high, and bubbles not stirin the mix, was to add another 10ml of crystallic and another 5ml of nitro... then pumped both tanks with ph down and set em to 5.8-6.2 - both plants have fully recovered from the big trim, and bounced back within 12-24hrs, post pics/vid in abit..... Day 39 - made a freaky video... was curious about what the plants would see looking up at the lights... the lights and buzzing of air compressors and bubbling tank water, and dazzling lights turned out pretty cool in vid editor, was in selfie mode.... and final vid of the bounceback from trim :) 👍😎

its very good plennt💚🍀🍃🌧️good groww

Blue Dream Auto is doing good. I have been keeping her lst up to date, and defoliated her a little more. Everything is looking good. Thank you Seedsman, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 https://www.seedsman.com/?a_aid=Mrsour420. This is my affiliate link to seedsman. Thank you Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.

This clone was neglected so badly. The dispensary got them from had no idea on how to take care of plants. I wanted to take them all to give them better homes. The leaves were so thin that they felt like paper. I've never felt a plant like this one felt. I will make her beautiful. She's exploding with new root

Final painting and floor trim completed. Walls are white and bright. I started to construct the main flood table. It is made of 2x3's and a sheet of chipboard. I fastened some rails at the perimeters and used caulking to seal all gaps. I will coat the face of the chipboard with a polyurea flat roof coating to make it completely watertight. I have 1/4 : 12 slope on it right now so that it drains to the reservoir end. I stained the sides of the table grey to match the floor trim because ambiance matters Shelves are up to hold my nutes/test pens/genetics/nug/papers/etc... I brought in one of the 3 HLG 550 clone qb's to test for light as I have never seen them in action. WOW!! Having one running is quite intense, I cant wait to see what all 3 going over the 4x10 area will look like (with shades on of course) A minor adjustment is needed to the height of the A/C exhaust vent. It is currently too high by 2" and needs to be lowered. Kind of a pain in the ass, but needs to be done for the table to fit snug. Previous total spend $2430 This weeks spend = $50 (hardware) $165 - killer deal on ebay for 8 inch fan/filter/ducting. open box, new

Sorry for the late update, everyone. Thank you for checking out the garden. This lady has absolutely exploded! I am anxious to see how her buds stack up over the coming weeks. She has been drinking and feeding so much lately that I went ahead and bumped her up to 75% nutes instead of just 50%. We will see soon how she handles them. I was getting crazy pH swings (down to 4.4) because of how heavy she had been feeding. With the tap water I have, the new nutes measure about 850-900 ppm, but tap is about 200, so ~700 ppm of actual nutes. Feel free to hit me up with any comments or questions. 11/21 - Uploaded video showing canopy density and frequency of bud-sites. This lady was only topped once. 11/22 - Uploaded new shots of canopy (48 hours after bumping ppms) Thanks for stopping by the garden, and , as always, Happy Growing!

🍀✌️

Die Temperaturen sind seit einigen Tagen sehr niedrig, was ich versuche, möglichst zu regeln, indem ich den Lüfter bis auf 10 % gedimmt habe Und eine Heizmatte im Zelt habe. Tagsüber hält sich die Temperatur relativ gut bei 18-20° nachts fällt sie auf 16° wenn das Licht aus ist. Die Pflanzen wurden entlaubt und beschnitten. Sie entwickeln sich toll und werden langsam schön purple ❤️

🍁❤️

Started with a super low dose of massive bloom now that my flowering has started on these, it was recommended by the hydro guy and I wanted to use something as just the organics has not been thickening up the way all of my bottle grows did and I think it is due to a lack of PK. I also added in some myco spores on vermiculite that I got from the hydro store as well, figured it would be beneficial for the roots during flower and likely should have had it the entire grow. I have tied down my one plant in more places as a test to see if it will produce better than the other 2 which were only tied in one spot.

. 🌱 : test harvest on day 86, 40,3g wet, day 88 44,5g wet 💧 : 4l day 85, 4l day 88 no nutrients 💡 : Dli: 45 mol/m²/d 🤔 :

Well, Surprised by the size at the second week. As my second time growing in indoor, the first time I try with 5.5lt smart (fabric) pots with BioBizz Tripack. At the harvest, only the Torpedo was the biggest (the other was Mamba Negra, Stress Killer) size of crops (2,5 cm diameter). The smell is quite light, as fresh lemon or ment. The leaf are more light than the first Week. The torpedo is growing up more, same at the first time I grow it (Sorry for my english, I can't specific more details),

Sticky Broccoli Auto — Week 3 Update Grower: Stoney Stark / Little Lilly Farms Event: Eternity Cup Stage: Late Veg (Pre-Flower Transition Approaching) ⸻ Growth Overview Week 3 showed aggressive vegetative expansion. Plants are stacking nodes quickly with strong lateral branching and tight internodal spacing. No visible pistils yet, but structure suggests pre-flower is approaching soon. Feeding frequency has increased to near-daily, which aligns with rapid coco dry-back under elevated PPFD and warmer temps. Plants are handling higher EC without tip burn or clawing, indicating strong uptake and healthy root function. ⸻ Light Settings 2/5 — Spectrum Adjustment • 60% Cool • 40% Warm • 0% IR • 0% UV • 430 PPFD This spectrum favors vegetative growth by emphasizing blue light for tighter structure while maintaining enough red for balanced development. ⸻ Environment 2/6 • Temp: 84°F • RH: 69% VPD is on the higher transpiration side at that temperature. This explains the heavier feeding demand and strong nutrient pull. Plants are metabolically active and drinking accordingly. ⸻ Watering & Nutrient Log All nutrient amounts listed per gallon. ⸻ 2/6 • 1 gallon mixed • ¼ gallon per plant via auto system • 1050 PPM • 5.8 pH .5 ml Silicium 2 ml Mag-Cal 10 ml Cocos A 6 ml Cocos B 1 ml Royal Rush 4 ml Pure Zym 4 ml Photo + 2 ml Fish Sh!t 5 ml Ruby Fulvic Notes: Elevated PPM largely from Scientetics Mag-Cal addition. No signs of toxicity; plants appear to be responding positively. ⸻ 2/7 • Light defoliation • Cleaned lower growth to prevent sprayer interference • Removed 2 larger fan leaves per plant for penetration • 5-gallon batch mixed • Auto system ran 2 minutes • 5.8 pH • No runoff Nutrient mix remained identical. ⸻ 2/8 • Auto system ran 3 minutes • Small runoff achieved • 1250 PPM • 5.8 pH Same nutrient ratios maintained. Observation: 1250 PPM in week 3 is aggressive for autos, but structure and leaf posture suggest they’re metabolizing efficiently. ⸻ 2/10 • Removed 2 large top leaves per plant to open side branching • 2 gallons mixed • Auto ran 3 minutes • ½ gallon per plant • Small runoff achieved • 900 PPM • 5.8 pH Adjusted mix: .5 ml Silicium 2 ml Mag-Cal 10 ml Cocos A 6 ml Cocos B 1 ml Royal Rush 4 ml Pure Zym 2 ml Fish Sh!t 5 ml Ruby Fulvic Photo + removed this feed cycle. Lowered PPM to 900 — a smart reset to prevent salt stacking while maintaining daily feeding cadence. ⸻ Nutrient Function Breakdown Silicium • Strengthens cell walls • Improves stress tolerance • Supports upright leaf posture Mag-Cal • Provides calcium for cell structure • Magnesium for chlorophyll production • Essential under high LED intensity Cocos A & B • Primary macro base (NPK + micros) • Drives vegetative expansion Royal Rush • Early metabolic stimulator • Supports nitrogen utilization Pure Zym • Enzyme product • Breaks down dead root matter • Prevents medium compaction in coco Fish Sh!t • Microbial inoculant • Enhances nutrient conversion Ruby Fulvic • Chelation support • Improves micronutrient uptake • Increases efficiency at higher EC Photo + (earlier feeds) • Carbohydrate support • Microbial fuel • Supplemental metabolic enhancer ⸻ Technical Observations • Feeding frequency is appropriate for 84°F + 430 PPFD • Achieving slight runoff on 3-minute cycle is ideal • Dropping from 1250 to 900 PPM was a strong preventative move • No pistils yet — expect pre-flower within 5–10 days At this pace, they are setting up for a strong stretch phase. Structurally, they look primed for a controlled but productive transition into flower.

Here we are at day 56 and so far so good as you guys can tell from the picture she seems to have had too much nitrogen. So the last feeding was strictly green sensation.. The feeding prior I also cut back on nitrogen so hopefully she lightens up some in the coming days.. thank you to Kannabia Seeds for the opportunity to grow this girl.. As you could see, no training at all, so I don't expect much more than maybe 1.5oz or 2 tops .. i will say she's looking good in some of the fan leaves are already producing trichomes.. This girl is a light feeder, so to everyone growing it.Keep that in mind.. I hope everybody is doing well.God bless and happy growing ✌️

Muy buenas a tod@s... Bueno otra semanita para la psicodelicia... Me va gustando, la veo fuerte, crecen bien y rápido, ahora la veo decaída, pero se pondrá bien..💪🏻💪🏻 De momento todo en orden, buen ambiente y buena luz, una semana más y a floración... 🌱 A ver q tal sale... Bueno espero les guste... Un saludo y buenos humos para tod@s... 🔥🔥💨💨💨 ⚕️😎💎 🇦🇷🤝🏻🇪🇦

Skunk apple runtz I'm probably only going to keep 1 of these guys seeing the 2nd just has really bad growth so far. I'm sad about this I made this cross out my last grow and was hoping for the better end of things. The other plants is decent but we will see I hope it has the growth pattern of the lit farms Rick bobby and the bud structure of the obama runtz I grew It's looking like a good start to a week the plants are strong they are getting to the point I can let the dried dry out completely. I'm thinking by the end of this week the plants will be starting to be sold. Last week I put all the plants into my bigger 2x4 tent with my medicgrow mini sun 2 the 500w version. Only a few of the plants were ready for that light. Seems like the only plants that really have good resistance and have a strong start are the weedseedsexpress.com seeds. Shout out to weedseedsexpress.com for the strong plants. I ended up putting all the plants back into my 2x2 tent with the 55w amazon light it has alot more blue light in its spectrum. It's kinda weird b4 I switched the plants to the 2x4 tent they were getting 220umol under my amazon 55w led then when I put them under the 500w light 25% strength about 50in from plants and they were getting only about 195umol in that tent but it was stressing most the plants. I assume a larger light has more side lighting hitting the plants. I think when useing larger lights it's good to measure umols from the top but also coming from the sides. I think durring seedling stage they only need about 50% the umols coming from the side the plants as the top is receiving. When I put the plants back in the small tent about the same umols as they were getting b4 the switch and they were still a little stressed. So for a few days I put the small light at the top the tent giving them 100umols for a few hrs then 130umols the rest the day.