Likes
Comments
Share
@DRO420
Follow
Second week of Veg and they are growing fast , very healthy, no deficiencies , perfect color green.
Likes
56
Share
@Prilyfe13
Follow
May 31, 2024 Harvest day. Finally! Banana Purple Punch A was 22 oz wet trimmed. Day 3 drying Banana Purple Punch B was 20.5 oz wet trimmed. These 2 were a breeze to work with. Even though Banana Purple Punch A got some nutrient burn. She still pulled through with a happy wet weight. I'm guessing based on the size of the buds and how dense they are, we will have a decent weight retention. Maybe 4.5 oz for Banana Purple Punch A and 4 oz for Banana Purple Punch B. I'll say this. The aroma of these ladies was straight banana. And SUPER potent. Nealy overwhelming. I'll update at least the day of drying until they are done. I'm guessing 7 days for each. However, my dry tent is too dry. No clue why. I may have to put a humidifier in the tent. I know you shouldn't do that, but I need the humidity to be above 52%. June 1, 2024 Banana Purple Punch A Day 4 Drying. Banana Purple Punch B Day 1 Drying. Nothing to really discuss today. We are all looking good. Still need to install the humidifier. The temp is pretty good though. At 66°, but still way too dry. I'm concerned for Banana Purple Punch A. I don't need her drying out too quickly. I took a sample from Banana Purple Punch A today. The stem is completely wet, but the buds were definitely nearly dry. No gummy grinder, no grass smell, just some good weed. I'll keep I'll check her tomorrow. I'm assuming she will be done by tomorrow or the next day. Dry Tent Environment: Temp: 67.8° RH: 51.8% VPD: 1.12 kPa June 2, 2024 Banana Purple Punch A Day 5 Drying. The smallest of twiggy branches had a nice snap, but anything bigger isn't quite there yet. I'd say another day in the current environment. 60% humidity and 68° Banana Purple Punch B Day 2 Drying Update: I ended up manicuring and bagging Banana Purple Punch A. The moisture meter read 10.5, so I decided to finish them up. The humidity is super high today as it's raining, so the branches started absorbing water. The buds started as well, but now I have them in a Grove Bag. It's reading 63%, so it'll need a couple days of actual curing. I think it's a bit better to bag with more moisture and burp verses over drying and having to rehydrate the buds. I mean, of course the perfect time would be ideal, but I found that the fluctuation of the environment in my situation, needed to be bagged with even more control. I think I'll leave Banana Purple Punch B in the drying tent for as long as I can. So far the humidity hasn't gone below 58% so if I can keep it there and drop the temp, I can leave her in there for 10 to 14 days. Dry Tent Environment: Temp: 69.4° RH: 58.1% VPD: 1.03 kPa June 3, 2024 Banana Purple Punch A is smelling great! She's showing 64% in the grove bag, but that is probably because it's 68% humidity in my room. Unfortunately, this is the only place in the house I can store and cure my weed. So I have to fight it. I opened the bag and dumped the buds on a trimming tray in the dry tent. Not much happened except the humidity in the dry tent was 66% for the half hour they were in there, so it didn't do much of anything if anything at all. Banana Purple Punch B Day 3 Drying. Nothing else to say, she's drying and it will be SLOW. Very slow with this humidity climbing up above 65%. I'm afraid of mold. I have air circulation and the exhaust is running at about 40% power. So everything should be ok. I've also noticed the carbon filter for the dry tent is starting to lose its effectiveness. There is a slight cannabis smell coming from the outlet. It could just be how strong the aroma is for Banana Purple Punch B, cuz it's strong. That's it for today. I'm not bothering with the environmental readings. It's too warm and too humid. Lol. June 4, 2024 The humidity spiked yet again. Smh. I have the exhaust fan at half power now to keep the air flowing. Hopefully that prevents mold in this what looks to be a long dry. It'll be hot today, so the central air should kick on around noon. But for now the humidity is around 66%. Entirely way too high. The temp, however, is alright at 68°. I'd much rather the temp be below 65°, but I just can't get it down. I'm really hoping my hydrometer just needs to be calibrated or something. Reason being it's a dark tent with a fan going. The room temp is 69° and the humidity is 67%. One would think the temp would be much lower than 68° and the humidity should be higher in the tent. Alas, I have no idea how to fix this. I left the tent door open for a little bit to try and air out the tent, but there shouldn't be any old air issues. It's a 4 inch inline fan. No problems with suction in a 2x2. I'll keep fighting it until the A/C comes on. If anyone has any ideas, please leave a comment. I'd love a bit of guidance not only for this run, but future runs as well. Banana Purple Punch B Day 4 Drying. I'll note the current weight tomorrow. It makes sense as that would be midway through the drying time. I'm willing to bet she lost half her weight by now, if not more. June 5, 2024 Banana Purple Punch B Day 5 Drying. Day 5 Dry weight: 6.0 oz. That's a 71% loss so far. However, I'm guessing she won't lose much more weight. I ended up doing a snap test on some twigs and they are about 2 to 3 days out. Maybe 4 of the humidity doesn't let up. Speaking of humidity, it dropped down fairly low after the A/C kicked on. It was down for the majority of the evening and a few hours through the night. Unfortunately, it didn't last and is now back up to 63%. It's not too bad, but I'd rather the humidity be around 58% for this plant. Dense buds and all. But I'll take the higher humidity if it means a better dry. I don't think 63% is any good though, so I'll still try to keep it below 62%. Dry Tent Environment: Temp: 70.8° RH: 58.0% VPD: 1.08 kPa June 6, 2024 Banana Purple Punch B day 6 drying. It's humid. Like really $#@&ing humid. The dry tent is suffering horribly. It's 69% in there and there's nothing I can do about it. I can't seem to get the humidity to drop at all. I might put a dehumidifier in there to dry out out some, but then the temp will increase and that's already at 70°. That's too high on its own. All that being said, this will put major stress on the plant while it dries. And if I have learned anything, cannabis is like a sponge for water. So it's back to being wet now. I think it will be another 4 to 5 days. Which is about what I was planning on the first place, but that was with the correct environment. Not this horse shit. I should weigh it. It was 6 oz yesterday, so I wonder what it will be like today with all this humidity. 6.5 oz? Wouldn't that be insane? Dry Tent Environment: Temp: 70.1° RH: 59.3% VPD: 1.03 kPa June 7, 2024 Banana Purple Punch B Day 7 Drying The environment is still a little wonky. The humidity is just over 62% and the temp is just under 70°. Not ideal, but within range. Barely. I have a lot of airflow even though it's a dry tent. I need the airflow to keep mold spores from getting all over the plant. Banana Purple Punch A smells great. The Grove Bag is still sitting at 63%, but I plan on dumping the bag out later today. I want to air them out for a half hour or so. Dry System Environment: Temp: 68.5° RH: 60.3% VPD: 0.95 kPa June 8, 2024 Banana Purple Punch B Day 8 Drying. She needs another couple of days I think. No snap yet. The environment is starting to even out... For now. It's supposed to rain this evening, so the humidity and wetness will return. However, for now it's looking pretty good. The temp is still at 70°, but the humidity is at 61%. So that's good. Not the temp, but the humidity. Dry Tent Environment: Temp: 69.3° RH: 59.5% VPD: 0.99 kPa June 9, 2024 Banana Purple Punch B Day 9 Drying. I got a single snap from a small twig today. Unfortunately the rest of the branches are still bendy. But it tells me she only has a day or 2 left. She smells amazing. The sharp plant smell is finally gone and now it's just pure Banana Purple Punch. Sweet and pungent. And lots of Banana smell. The environment has stayed pretty consistent over the past few days. Hovering around 60% with a temp of 70°. I know the temp is a bit high, but it's the best I can do. Even when I bring the temp in my room down to 65° the dry tent only goes down to 68°. Dry System Environment: Temp: 69.4° RH: 58.9% VPD: 1.01 kPa June 10, 2024 Banana Purple Punch B Day 10 Drying. Still bendy branches. But getting very close. Sometime, within the next two days, she will be ready. It could be tonight, or in 2 days. At this point it's so slow I think I could push to 14 days. I most likely won't be doing that though. I need to either put a different plant in this tent or take it down for more space in my room. I'm pretty sure the environment is looking pretty good. The temp in my room is lower today and the humidity dropped a little bit. So we are definitely below 62% and the temp should be around 60%. My hydrometer shut off and I need to restart it. I'll update with real numbers later when I fix it. Update: The temp is at 68° and the humidity is at 58%. So looking good. I also took a small sample. No real snap, but the little twig snapped at the base of the side branch. Still... Not quite there yet. The grind is pretty good, but the bud doesn't stay lit as it should. So she's not ready. But the bud smells and tastes amazing. Curing will only make it better. June 11, 2024 Banana Purple Punch B Day 11 Drying. Yet another day of drying. I seriously cannot wait to sample this plant. She smells amazing. The buds look great. I've noticed that the branches don't seem to be hardening off. And if they are, I can't tell. It just feels the same as yesterday. Which felt the same as the day before. Or I'm just not paying enough attention. Either way, I'm still waiting for a snap of any kind. It could be later today or tomorrow. At this point I'm just guessing. Eventually I'll get the time down and know how long it will take in the future. Update: So I checked the small twigs and a couple bud sites. I found that the small twigs would snap at different angles and some not at all. Same with the bud sites. However, while checking one of the bud sites, a part of the bud popped off. Like it was getting brittle. I don't know what that means, but I'm bagging this plant today. The cure will bring out the extra moisture, if there even is any, over time. I'll wait a couple hours and see how she looks, but she is getting bagged at some point today. June 12, 2024 Both plants are curing at 60%. Perfect. Just wanted to mention that. I'll come back in a few months to update. You know, after the curing process is complete and we are just in the storage phase.
Likes
10
Share
Léger brûlures de noix sur une gorrila l'autre es en blocage de nutes. - 26/12 récolte sacs a pollen d'une super critical Bud puis reproduction avec la 1er gorrila.
Likes
9
Share
@Headies
Follow
So I had a little less nutrient last week then i needed. Def a calcium deficiency. I think it's clearing up but this plant has spot all over it. I changed the water, gave it the right amount of nutrients and a little exra hydrated lime for calcium. Hydro is hard. I hoping It's not sick. I hope It doesn't get the other plants sick. Just a few weeks left.
Likes
19
Share
@creichs
Follow
Switched to my 5 gal pots now, dumped 6L of water into each plant to get the pH back down still waiting for them to dry out a little before the next watering which should be less so next week will have water amounts Height is for the holy punch again. Power flower is still around 1.5"
Likes
11
Share
@Kirsten
Follow
☆♡ Gorilla Cookies: I've noticed a leaf fell off the bottom. I think I may've overdone the nutes. She's growing tremendously. I top dressed with the below, as the rest of my plants. I will only use PH'd water for the next several waterings, probably with Biosys or seaweed. ♡☆ 16.2.25: I decided to check out the lower canopies of all plants to see if I need to get rid of any foliage. I did get rid of a few small branches and leaves. However, whilst I was doing this, I saw more garden pegs from my LST remaining. There were about 6 or more in Pink Mist alone. Additionally, on Watermelon, there were some left in, too. I'm so annoyed to see that because the plants are really stretching, and I could've potentially disrupted this by leaving the pegs in for all this time without realising it. 🤞 that I haven't compromised things too much. We'll see. I watered today with 2ltrs of dechlorinated water PH'd to 6.3 containing the following nutrients; ♡ .8g Green Leaf Nutrients PK booster ♡ .5g Ecothrive Biosys I ordered quite a few things for the garden. I got Greenleaf Nutrients Sea K(elp) and Mega Crop Parts A+B. To go with their PK Booster I got last month. I'm excited to try it all together. Next run, maybe just using these. We'll see how it goes. 18.2.25: The plants are going crazy for water! Everything is getting used right up so fast! Today, I decided to add some more Black Strap Molasses to add some carbs and other micronutrients. I'll add the jar with the label in the photos section above. I watered a very small amount to each plant. What I put in: ♡ Black strap molasses 150g ♡ 2g Sea K(elp) Greenleaf nutrients. I dissolved everything in 4ltrs of dechlorinated water PH'd to 6.4. 19.2.25: I received the majority of the garden purchases that I made. I'm still waiting for the Ecothrive Life Cycle. I wanted to top dress, but it's been delayed unfortunately. I am using my Greenleaf nutrients products which I bought on Amazon. I got the Mega Crop 2 part system Part A and Part B. I have the Sea K(elp), and the bud explosion PK booster. I really wanted to get some of their sweet candy asking read many positive reviews. Unfortunately, for me, this is unavailable to buy currently. So that's a little disappointing. I needed to do a good watering so when my nutes were delivered today, I got excited 🤗 I watered 2ltrs of dechlorinated water per plant, PH'd to 6.4, containing the following nutrients: ♡ 1g Mega Crop Part A ♡ 1g Mega Crop Part B ♡ .5g Sea K(elp). The plants drank this up within a few hours. I'm going to try and hold off on watering in hopes that my Ecothrive Life Cycle will arrive so I can top dress and water it in then. 20.2.25: My Ecothrive Life Cycle arrived yesterday, and the plants are ready for their top dress and a good watering in. I have some Biobizz Light Mix, Canna Coco,and perlite. I'm going to use this as a base to mix my amendments in. I'm going to fill my 5 gallon bucket with about 4.5 gallons of my top dress mix. I will distribute this across 6, 4-5 gallon pots. Then I will water in well with Greenleaf nutrients Mega Crop Parts A+B and Sea K(elp). I've made a crude attempt to video mixing my top dress. Don't listen to the audio. lol, my YouTube didn't stop playing whilst I recorded this 😂 So anyway, I added the following amendments to the above base mix of 4.5 gallons; ♡ 3 TBSP Ecothrive Life Cycle ♡ 3 TBSP Vitalink Bat Guano ♡ 3 TBSP Ecothrive Charge ♡ 1 TBSP RHS Mycorrhizal Fungi granules ♡ 6 TBSP Ground Cinnamon.
Likes
Comments
Share
@Growtopus
Follow
Letzte Woche kam ich nur zu kurzen Kontrollen und zum gießen, mehr war leider nicht drinnen. Die Georgia Pie habe ich etwas zu eifrig gegossen, das hat ihr Wachstum etwas verlangsamt, aber sie hat sich super davon erholt und hat wieder schön gesunde Blätter. Die Wurzeln haben den Topf bald vollständig Durchwurzelt und dann wird sie in 25 L Living Soil, gemischt mit Wizzy's Garten, gepflanzt. Es gab etwas Bonus Root Magic, damit sie sich schneller erholt.
Likes
5
Share
Clones got transplanted into 1gal Rapid Stack pots, this will facilitate the next transplant into the live soil grow bed with no stress. Quick and easy transplanting with no root shock or damage to the plant. Plants still drinking rain water, top dressed with Bokashi Pro-Gro, the soil is recycled and organic :) Check my Instagram for more grow content @GirlGoneWeed
Likes
10
Share
@BombBuds
Follow
Dried them at 23 degrees and 53% humidity for about 10 days +-1
Likes
14
Share
Likes
3
Share
Día 19. Las Tropicana han reaccionado muy bien. Aproveché para hacerle LST a una y HST a la otra. Las Polaris estaban revegetando, así que esos las demoró. Pero ya empezaron a estirar. Además a una le tuve que cortar la rama principal y dejar 2 laterales, dado que estaba muy maltrecha. Mantuve la solución nutritiva de la semana pasada y la voy a cambiar hoy o mañana seguramente. Voy a tener que esperar para pasarlas a floración, ya que tengo una mudanza en unas semanas. Así que la floración va a ser post mudanza.
Likes
4
Share
10/11/24 she had gotten so overly dry that she was impossible to water. i had to scrape and break of the dry spots all around the soil and root ball so that water could penetrate. she was root bound from a solo cup and then as well from 1 gallon to 3 gallon. once the rootbound spots got overly dry, they became super hydrophobic and i didnt realize how bad it was. that may be what's been affecting the over all health of the plant. finally able to get her to hold weight in water so im hopefull 10/15 pistils are getting thrown out everywhere. a bit of a stretch so far but not too much. maybe a couple inches or
Likes
198
Share
@DevilsBud
Follow
New week for the 2nd grow In the new marshydro set-up Enjoy the video be warned it can get LOUD 😉 there all looking amazing in there own way for separate details per plant go to there diaries 🤘🏻 I believe the new FC-4800 wel i KNOW This lamp is out of this world for sure it will get your so frosty so quick i was afraid i did something wrong lol nah she is just a absolute BEAST . AND THE 120X120X200 TENT Is great for the grow that have going on now there snug like bug in there no netting needed 🤘🏻 the control of heat and humidity is easy as can be winter is my time to grow no problem what so ever visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
241
Share
💩Holy Crap We Are Back At It And Loving It💩 Growmies we are at DAY 42 and she's just killing💀it👌 👉We are in full on flowering , gotta say the pink to redish hairs look amazing , not to mention the frost 👈 even the stems and branches are sticky icky 👈 OMG I LOVE THE PINK PISTOLS 👈 So Shit , I gave them just a tad to much nutes on the first few feeding 👈 But I have since fixed it So I'm still doing some low stress training 🙃 and some defolation 😳 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈
Likes
7
Share
@darcness
Follow
Substantial growth in the roots. Should hit flower in the next week or two.
Likes
1
Share
@Drsensiii
Follow
Outside has been extremely hot where I am so getting my temps to slightly drop as flower goes on is proving to be difficult.
Likes
23
Share
Prima volta che provo questa genetica mi ha sempre affascinato per la sua grandezza e forza nel crescere
Likes
4
Share
Familia que ansias ya sólo una semanita más y a cosechar 😁y veremos que tal a salido el fruto esta semana y la q empieza sólo e Estado regando con agua con el nivel de pH a 6 un abrazo familia y buenos humos paz
Likes
23
Share
Buds really starting to smell amazing and sweet 🙂 shockwave f2's smelling really nice 👍🏻♥️ tent seems to get bigger by the day.. ⚡⚡🌱⚡⚡ 3 weeks left till the great chop 🙂 can't wait..