Likes
Comments
Share
@GeekWeed
Follow
Entering the final stage of this run.. in other words, late flowering. Just giving 1600ml of RO water enriched with Ca and Mg. Guess I will feed a last time with Enhancer and Green Power tomorrow.
Likes
25
Share
Nematodes inoculated. Topped, I'll probably start quad-lining it soon. Clone started in soil (mulched with its own chopped leaves). The cover crops are invading this little garden. It doesn't show but it has already been trimmed last week. Radishes will be harvested in about 10 days, it'll make some more room for basil that I'm propagating for this tent. [Done] I'll be applying a seeds sprouts tea this week end or early next week (I haven't soaked the seeds yet 😅). [Done] Place training frame for LST on the quadline Side note: this young plant is slowly starting to smell like potential goodeness 😉
Likes
11
Share
@cadur
Follow
Whoops, power went off in the shed, plant has been in the dark for 5 days basking in high humidity! Silly me
Likes
13
Share
@Dankdan02
Follow
Am freitag wird gesiebt und ich halte euch auf dem laufenden Geruch und wirkung vom hash ist ganz wild, positiv ausgedrückt ist es klar und deutlich erdbeer banane vom geschmack und geruch, knallhart ehrlich ist es aber eher eine grüne erdbeere mit bananenschale😅
Likes
3
Share
Tag 34 - 03.01.2025 Es gibt keine Veränderungen. Tag 40 - 09.01.2025 Es wurde etwas enlaubt, die Pflanze wächst weiterhin sehr kompakt.
Likes
62
Share
@MeaCulpa
Follow
Third week in bloom. Everything is going well. My only concern is that I have defoliated too much and my humidity is too high. Difficult to get it down when it's just raining outside. I'll see what happens... 19.12.2023 I've made some space and flanged my old 60x60x120cm tent on the right site and switched on another PC fan. I hope I haven't made a serious mistake. All fans repositioned. And everything is taped off so that no light comes in. That was too crowded. Next time 4 or 5 will be enough for me.
Likes
17
Share
End of week 4 marking around the half way point as both strains both have 8-9 week flower periods. Runtz Muffin #1 already looks like it's going to have more of a longer airy bud structure compared to the others
Processing
Likes
12
Share
Girls are about a week out or so! Girls are fattening up each day and trichomes are starting to go milky. Harriet (left) has been having trouble with pH dropping but she's still drinking. I ended up removing about 2 liters of solution and put pH'd water to lower the ppm. Seems to have helped bring the pH up to about 5.3 (up from 4.1) but will continue to monitor. I noticed the leaves are starting to discolor on the serrations, and got a slight tip burn, so thinking dropping the ppm a tad was good? Lol Haven't totally decided when and how long (if any) flushing I'll do. I see conflicting info and anecdotal evidence to it's effectiveness. Guess it's time for some soul searching 🤣 See y'all next week!!
Likes
6
Share
@Thedibber
Follow
Last few waterings now mostly cloudy trichs
Likes
14
Share
Week 5 of flowering,two more weeks till harvest. She smells strong but not sticky like some strains,there are a lot of trichomes,some of them are milky, so i decided to flush.
Likes
56
Share
Day 28: Halfway to the 8 week flowering point now and it is all going well. Gorilla Girl #1 is stacking her fluffy but chunky buds up very nicely. Plenty of growth this week and loving life it seems. Gorilla Girl #2 is forgingnahead of the game with her bud tightness and creating some very nice clumps of buds that look solid and some very nice colours appearing all over her. love how she looks this way her node stackingnis tighter than the other 3 so far and a definate pheno difference to #1 and#3 Gorilla Girl #3 is going for it with the amount of flowers she is pushing now but won't be as big as any of the other plants. I think she looks a little hungry too which is possibly why she has struggled in the pot. I am adding some megacrop to the feed for the two smaller pots in case rhe amount of medium is exhausted as in previous grows with it. The pot size with los seems to be very important on this on score . Lets see if she colours back up for the final push. Gorilla Girl #4 onbher archiver style has put out some beautiful examples of the strains bud. Her node spacing is between the #1!and #2 for comparison which gives her clumps with gaps on the stem and really highlights the flowersets. Any Bee would be made to pass this beautiful girl by without a visit!. .I am so far very impressed with the Gorilla girls from Sweet seeds. They have been easy to work with and grow too. The plants are looking top notch now too. Good work in the genetics dept guys. Sweet cheese a.k.a Norma Natural is forming a classic centre spiked cola with decent supporting nodes gaining height and weight too. interesting to see it grow thisnway but ... I also see how training is essential for a more even distribution of energies and food. All in all a good progression this week. fingers crossed for the upcoming half to go. be well Growmies.
Likes
4
Share
Day 49! Starting to give her just plain water for 2 weeks of flushing. Getting really excited to harvest and then get going on another grow. See you next week.
Likes
567
Share
MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND REACH FOR THE STARS WITH MARS🤘🤣. https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA So it's been 17 days under the new MARS HYDRO FC4800 and the TSW2000 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. Its the NEW blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I'm in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. I CANT BELIEVE the amount of crystals the plants have already🤘 they just started getting bigger hair clumps and I didn't expect to see this much already👍 awesome lights do an awesome job. So it's looking good for these strains I made👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll Instagram: @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll Instagram: @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll Instagram: @marshydropenny Happy growing to all my friends 🤜🤛
Likes
11
Share
Just doing her thing, perfect color, perfect shape, buds forming at a rapid pace, crystals showing up, beautiful times ahead :)) Cant be more excited than i am at the moment