Likes
121
Share
@ctm_dzagi
Follow
Very strongly cut off, I prepare to the beginning of flowering, he released a call that for some reason had a pair of leaves, because of which it turned out to be a little more torn off than it cost, I will give her a couple of days and we will begin the translation into flowering, also revealed a call which has 3 points of growth on each floor. Changed lighting: 37 watts white 55 watts blue, 38.5 watts red, Today I fully watched the side lighting and the electrics, controlled from a smartphone similar to the top lamp
Likes
5
Share
@Kominest
Follow
There’s a big variety of budshapes on the Q1 which I really like the dos si dos buds all have the same shape and look big and stacking Unfortunately one of my mates spotted a banana on the Q1 maybe caused by calmag deficiency so on Monday to Tuesday night I decided to harvest her . Trichomes were most milky and with an expected blooming time from 5-6 weeks harvesting her starting of week 5 hurts a little but should be fine . Dos si dos now solo in the tent with no bananas or seeds spotted yet
Likes
9
Share
@Rckeh
Follow
Day 94 - 13/07/2023 Start of 8th Week of Flower and FLUSH Day 95 - Buds are starting to have that final golden color, harvest really is arriving. I could harvest now but i want to flush this plant properly. Today it started to rain and buds are all wet. When it stops raining i´ll check the plant and shake it to remove water. The plant love it but humidity is really high here and mold can forms even when it´s not raining. I´ll check trichomes when possible aswell. Day 96 - Today rained in the morning, but after midday sun started to shine. Had some minor mold problems which i removed immediately, but nothing really to worry , this strain is tough aswell. I checked trichomes, i already have some amber but i think i saw some clear ones here and there. My instinct is telling me to harvest now, but my experience wants to flush this plant properly. I think i should have started to flush earlier, but i did not regret as i want to try out and let a plant really mature. After all im am not that experienced. Day 97 - Today the pot was already kind of dry so i watered her to help the flushing process and i think this will be the last watering. Day 99 - Here i just think i took some really cool pictures, for me at least! 😄 I´ll let the soil dry well so i can harvest with less humidity possible
Likes
1
Share
@BruWeed
Follow
Esta semana ya realice la poda. Se encuentra en estos momentos en etapa de secado dentro de una caja especial para secados de flores que uso siempre y nunca me falla. En humedo hay 195g y utilice una lampara led de 150w en todas sus etapas. Próximamente estaré publicando cuando este en curado.
Processing
Likes
16
Share
@GRow_M8s
Follow
* Buds progressing good, no deficiencies except stomper #1 with burn tips , no stretch except stomper #3 the stressed one ( 👈 check week 3), SODK looking good 5 days later though. * LST stopped at day 35 ,🔅 lights still 24/7. Temps steady at 25 c° and humidity 50-60%. * Day 39 watering 1l /pot with active vera, EMs and co2 tablet. 🔅Lights 20h -> Days 38-39 Trying to control VPD, maybe 🤔 transpiration in the lasts weeks wasn't on good levels and missed some stretch.!? We ll try to understand what we missed or it's just the genetics under these circumstances! ⚠️ So Day 42 end of week 6, had low temps and high humidity later this week. As we cant check the grow tent all day except few hours per day we've missed some highs and lows of the temps and humidity but overall we were ok. After looking closely back in the dairy infos and the signs of the plants, the overall progress, our rich soil composition, early bloom phase etc, 🔜 We came out with some interesting thoughts to share with you about our meph heads organic try, stay tuned at the next update ( 1st update of week 7)⚠️ Last update--> Day 42 🔚
Likes
1
Share
@Takeaims
Follow
I don't know why she ain't flowering going to ask a few growers what's up
Likes
563
Share
@Ju_Bps
Follow
Hello my friends 👩‍🌾👨‍🌾, This 4th flowering week was good, girls are sweets and healthy, we have nice leaves purple 💜, Buds continue to be along and start to bump. I've found some thrips and lot of flyer 😑😑, several month I was without this fkg bug, but they're back.. I don't know if I do a treatment this week or if I wait the harvest to clean... And daily fighting with leaves to kick off them under. 💦 2 Watering this week 1.5l/plant . Water + Terra Flores + Canna Boost Water + Cannazym + Sugar Royal PH@6 Lamp @100% Bisous 💋😘, and see you next week. Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - TS 1000 https://www.mars-hydro.com/ts-1000-led-grow-light Mars Hydro - FC3000 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - SP3000 https://www.mars-hydro.com/sp-3000-samsung-lm301b-greenhouse-led-grow-light The High Chameleon - Bisous Au THC 💋💋🌲🌲😘😘 https://www.thehighchameleon.com/shop/bisous-au-thc-83
Likes
10
Share
It’s still drying but i pulled a few nugs to start the cure. I still have one plant up, it’s seeded and working hard on seed production. Keeping alive as long as needed.
Processing
Likes
4
Share
Was a real experience to grow the Darkdevilauto, with these Strain we could see a lot of what a ganja plant can resist, the two ladys are amazing but the vipaspectra has a bigger, strong and clear smelling, the second Lady look also greatly under the Mars hydro pannels but in thc production we see a gigantic difference. Thanks again to sweetseeds for send us these strain. Always with TnB naturals co2enhancer and ph up and down , thanks to all the feeding to biobizz and Greenleaf nutrients
Likes
5
Share
@BombBuds
Follow
Die Milben haben wieder gute Arbeit geleistet. Alles schaut wieder gut aus! Werde sie jetzt so lang der Stretch noch geht mit Draht und Netz auf einer Höhe halten und ausbreiten. Anfang nächste Woche mache ich ne Defoliation und evt bissl lollipopping. Und lichtintensität geht nächste Woche auch auf 100%
Likes
8
Share
Hello growers day 63 in the garden with blue monster auto she’s just getting beefy now the buds are full of resin she is popping off the weather is banging right now in the uk so she loving life outside I’m going to start flushing now so she should be ready very soon I’ll keep an eye on the trics and wait for amber to start showing so until next week be safe and happy growing ✌️
Processing
Likes
7
Share
Greetings, thanks for taking a look at my post 😄 The third week of flowering begins today, and these blueberry mystery crosses are looking pretty decent, bud production is coming along at around the rate I usually expect in this tent, and the plants look nice and healthy. I'd like the humidity to be a bit higher and am adding cups of tap water to the spill tray to help out. Lots of leaves, but I'm going to wait a bit before doing any defoliation, probably not till next week. Please let me know if you have any comments, questions, pointers, or anything you notice that I might not have. Thanks so much 🙏
Likes
20
Share
@usere
Follow
defoliation all fan leaves that cover other top sites and improve airflow and light penetration one each other. I will remove more leaves during week 5. watering schedule is the same, one times i watered with molasses about 2ml/l.
Likes
9
Share
All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 (NEW) STRIVE NUTRIENTS 💪 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
27
Share
@Herbinski
Follow
Both seeds came out quick and vigorous, I hade to leave for three days and left the tent closed and the humidity went through the roof, I think this caused the leaves to twist up a little but at this moment I am not very concerned about that, Based on the other strains I did from the Sherbinskis Humboldt line, I am expecting a bit longer vegitation period, so a minimum of 6 weeks, depending on how they develop, The Bilberry Lamp is making a great impression I must say, the special grow spectrum in full effect. Hope they go good, fingers crossed 👍
Likes
12
Share
@Gdawg
Follow
They are striving in there inviroment... sorry been ill for two weeks im impressed with the plants smell amazing and growing just as good
Likes
9
Share
@RadDad
Follow
While this plant didn't produce much bud what it did produced was pounds of experience. This was the first autoflower I've ever grown and is my most successful grow to date. I made mistakes but I learned so much. Can't wait to try this one again.