Week 3 Light cycle=18/6 Light Power=100w Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 60% Low Rh= % Rh step=0% Speed max=5 Speed min=1 Smart controller settings (during lights on). Lights on=06.00am Radiator on= below 20c Radiator off= above 21c Humidifier on= not in use. Humidifier off= not in use. Dehumidifier on= not in use Dehumidifier off= not in use Smart controller settings (during lights off). Lights off=00.00am Radiator on= below 18c Radiator off= above 19c Humidifier on= not in use Humidifier off= not in use Dehumidifier on= not in use Dehumidifier off= not in use VPD aim=0.6-1.2 DLI aim=22-30 EC aim=0.8 PH aim=6.2 Thur 11/1/24 #2 (Day 15) 📋 little bit stressed from yesterday's topping. Fri 12/1/24 #2 (Day 16) 📋 Turned pot 180 deg Sat 13/1/24 #2 (Day 17) 📋 pot is getting lighter, prob water tomorrow. Sun 14/1/24 #2 (Day 18) 📋 Removed single finger leaves and nodes. 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= manual Total volume made=12L Neutralise=0.1ml/L Silicon=1.0ml/L Calmag=1.0ml/L Terra grow=2.0ml/L Roots=0.2ml/L Easy Ph down=0.2ml/L Feed=nutes Volume=2L Ec=1.7 PH= 5.8/6.0 Time=5.00pm Runoff. Total runoff=small amount Ec= PH=/ 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Mon 15/1/24 #2 (Day 19) 📋 turned pot 90 deg. Tue 16/1/24 #2 (Day 20) 📋 did nothing. wed 17/1/24 #2 (Day 21) 📋 H=23cm D=50cm DLI=27.6 Installed the drippers. 🚿 foliar sprayed (cal-mag 5ml/L) Turned pot 90 deg. It's been a decent week for this girl, starting to catch up some of the others. Back soon. Take it easy.

hello everyone, weed masters! your Peaky is raising some very good queens !! I had to improvise something to pull the lights higher because these girls are getting really tall! their buds are filling with sticky trichomes like glue! mmmmm a sweet lemon aroma can already be perceived! damn ... I can't wait! HAPPY AND ABUNDANT HARVESTS FOR EVERYONE BEST REGARDS PEAKYPLANTERS

End of week 1 of flower Started LST today She is doing very well The other Bruce Banner in shared pot is in full flower by 1 week and measures 41 cm

Lowered the lights a good 8-10inches just because i realized i could get them closer without burning! Going for around 6-7 inches above canopy getting the temp in the high 70s low 80s om top canopy. All pheno are getting very unique and super resinous! I have a slight lnat problem going to spray this week when i get paid

Pre flowers started on my soil grow. Just started seeing one or two white hairs on my hydro girl. Starting to clear up that calcium deficiency as well.

hay que mencionar que las raíces están muy grandes y fuertes, crearon un sistema radicular muy denso, parecen ramas, los troncos están muy grandes y fuertes, ya empiezan a notarse más y más las flores

En la segunda semana de vegetación fertilizamos con un estimulante de crecimiento, aplicando 1.5ml / litro con p.h regulado en 5.8.

It’s looking good not long now just a few more weeks

This plant early entered to flowering stage in week 3. Other is nothing special. Thanks.

I added a dehumidifier towards the end of this week to reduce the RH, but the thing i didn't realise was there were some red and yellow led's on the dehumidifier, one displaying RH and another for the power. I didn't cover up either through the dark periods and i just hope this past few days with them on doesn't affect my final yield 😣 Looking at the trichomes am i correct to start flushing now? let me know what y'all think!!

Another round of topping. Tied her all back to spread out for LST. Going to flip to flower next week. Used the Kushman technique and Supercropped all her stems every inch on the way up, without bending. Gives her muscles to flex <3

What a roller coaster of emotions. Was a litle early to harvest but since I also got some pollen thats totally fine!

I'm wanting to replace all my miscellaneous lights with another quantum bar rig before my Fall grow this year. Anybody want to buy some gently used lighting gear this summer???😁😎 👉 2 x 100w Cree CXB3590 (3500k) with pin heatsinks - 3 grows usage 👉 1 x 100w Citizen Clu048 COB (3500k) with pin heatsink - 3 grows usage 👉 1 x 120w DIY quantum board (3000k) 256 x LM301b's - no heatsink - used for 2 grows 👉 1 x 60w Bridgelux COB (3500k) - Par38 style - used for 1 day (a back-up bulb) 👉 1 x Morsen 2000w (367w actual) blurple with a bank of 1/6 of the 200 LEDs not working - used 3 grows 👉 1 x Morsen 2000w (367w actual) blurple with only my current grow in use (the replacement) 👉 1 x HeroLight 1500w (285w actual) 5 x COB full spectrum (pinkish-white) - 2 veg stage uses 👉 4 x 36w Par38 type deep red (660nm) bulbs - 3 grows usage 👉 2 x 25w 225 LED panels (660nm) - 3 grows usage 👉 2 x 25w 225 LED panels (440nm) 4 veg stage uses 👉 2 x 25w 225 LED panels (440nm) 👉 1 x 50w 225 LED panel (6500k+440nm) 👉 1 x 20w Par38 style Cree COB (3000k) - (more like a 40w) - used for a week 👉 1 x 15w Sansi blurple Par38 type bulb - used 1 day only 👉 1 x 40w Sansi 4000k daylight Par38 type bulb - used during germination only 👉 4 x 12w MiracleLED red spectrum (4000k daylight + 700nm red) regular light bulb - used during flowering in 2 grows Just hit me up in chat if you are interested in anything- ============================================ SUNDAY 3/31: I foliar fed them a few times, rotated them and took some photos. Still trying to tweak the lighting timers for optimal flowering temperatures. Getting closer to perfect... MONDAY: Spun them around and foliar fed a few times TUESDAY: I fed them about 3/4 gallon each and started them on Open Sesame and Tiger Bloom. Foliar fed a few times and tweaked the timers again.. WEDNESDAY: I foliar fed a few times and rotated them, then took some photos. They are both stretching well now.👍 THURSDAY: Tina is an Amazonian Warrior, tasked with protecting Tanya, the Princess. Killer flora for sure. I foliar fed them a few times and rotated them 180 degrees. FRIDAY: I watered them with about a half-gallon each including boomerang, bud candy, calimagic, kelp me kelp you, terpinator, and armor si. I also foliar fed them a few times and rotated them. Temps in their tent are stable and acceptable.👍

Had a fine time updating this.

Many colas and hard buds here! Hope to get good results, even if i got some deficiencies. One of the three had some issues and didnt flower properly, the buds are airy and there is little resin production, while the other 2 have frosty and well stacked buds. I think they will need an extra couple week to finish off. As soon as i see 100% milky trichomes with 10/20% amber i will cut them down. Gonna keep u up to date

Well growmies ive been looking forward to the MonsterMash 👻 👻 👻 She was a really nice plant to grow , she did her thing and the 👈 Buds are tight and full of frost 👈 She definitely came with the sweet and sour terps , very sweet like candy but with a skunky terpy smell 😁Couldn't of asked for better Genetics 😉 The smell coming from this girl during the entire grow was just dreamy 👈.. 😍 Would definitely recommend 👌 👉 Big thanks to all my Growmies out there in GD land 👈 Much appreciated 🙏 Thanks To MarsHydro for the TS1000 x3 www.marshydro.ca 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14👉 All Weeks NutriNPK Grow 28-14-14👉 Weeks 2 & 3 NutriNPK Bloom 8-20-30👉 Weeks 4 to 8 NutriNPK Bloom Booster 0-52-34👉 Weeks 4 & 9👌👌

What a pleasure to see, to smell, and to grow, wonderful and magic strain, absolutely in love with the pure OG aroma, very strong, absolute gassy very powerful aroma, flowers completely covered in resin, super sticky, I just love tjis genetic man, always gotta have some OG in the garden this is the prove 💎❄️ peace guys ✌️💚

Week 4 is now Here and running into some issue with bug spray really did a number on my girls. The XL Haze plant bounced back quick, Thank God for good gene. This week I will also raise the light a bit to get the girls to stretch a bit more. This week will also be the first day the girls get a some actual nuts