Likes
Comments
Share
She was a dream to grow she is super frosty and the buzz is very cerebral and a fast onset and ending 4 hrs later with a good couch lock I am very pleased
Likes
8
Share
This week transplanted all new soon to be Mother plants to 5 gallon fabric pot, the topped plant responded well and is 8 inches, tied down to 7 to open her up, and the heavy rooted runt of the bunch is 6 inches,
Likes
4
Share
@Ledros
Follow
Day 8 (2020-05-17): G14 is looking a bit lopsided with its weird conjoined twin leaf, but the second set is growing opposite so hopefully it will balance itself out. I spent some time today getting the grow tent cleaned out and ready to move these two in and am starting to setup the Blumats for 2 gallon fabric pots when I transplant. Day 9 (2020-05-18): Moved the plants to the tent where they will spend the rest of the grow. Waiting to transplant until roots have established a bit more. They are now under the Kolem 800W (120W actual) LED light, currently running around 35% power. Watered today. Day 10 (2020-05-19): Transplanted to the 2 gallon fabric pots today and installed the Blumats. Added Drip Clean into the nute mix. Increased the light to 60% due to the increased distance after losing the Solo cups. Day 11 (2020-05-20): Transplant seems to have taken and saw some nice leaf growth over the last 24 hours. Main stems are noticeably fatter, also. G14 is still looking wacky. Day 12 (2020-05-21): Not much to report. Things are still looking good and I guess the Blumats are doing there thing? Coco seems plenty moist after 2 days. Day 13 (2020-05-22): Still trying to dial in Blumats. Coco is starting to dry out. Day 14 (2020-05-23): Hand watered to get back to optimum moisture and made further Blumat adjustments. By the end of the day it looks things are stable and correct. The G14 seems to be doing fine despite looking a bit weird
Likes
8
Share
@ZalySk
Follow
D37: gave the little gal a hair cut. Trimmed off the reveg leaves to let light in. There are so many nodes that could branch out, I wish I would have lst'd it from the beginning. Branches grew about an inch last week on top.
Likes
6
Share
🌸 Lava Cake – Week 7 Flower (Harvest Special) 🌸 This week marks a major milestone in the Lava Cake journey: we harvested phenotype two, who had been affected by bud rot. Bud rot may have tried to take the best from us, but we didn’t allow it. Every infected part was carefully removed, and the remaining healthy plant was harvested and is now drying as a whole plant under controlled conditions. ⸻ 🙏 Apologies & Context We know this is technically a flower week update, but due to the new updates on Grow Diaries and the desire to share photos, videos, and the story of this harvest so we’re combining the harvest with the flower week report. We apologize for any confusion — this is the only way to fully document and expose all that’s happening, and to make sure the lessons, successes, and challenges are visible for everyone following along. The next report will be the official “Harvest Report”, covering: • Drying & trimming process • Curing updates • Smoke review ⸻ 🌿 Quick Recap – From Seed to Here • Germination: Smooth in the Cannakan with Aptus Regulator & Start Booster, 3 seeds, 2 kept. • Vegetative Stage: Robust growth under Black Series 600 LED and later ThinkGrow & Lumatek LEDs. Root development and early structure supported with Aptus super soil and micro/macro mixes. • Transplant: Into 11L fabric pots, carefully monitored environment, roots thriving. • Early Flower: Weeks 1–4 brought thick white hairs, dense colas, and heavy branching. Nutrient support included Aptus Regulator, CalMag Boost, Plagron boosters, and All-in-One Liquid. • Mid Flower & Challenges: Week 5–6 showed signs of bud rot. Lava Cake #2 needed early harvest; Lava Cake #1 continues to swell and thrive. Through all of this, the Lava Cakes proved their resilience and quality, showing that even under stress, their genetics shine beautifully. ⸻ 🌱 Week 7 – Harvest Details • Bud Rot Management: All infected material removed and disposed of immediately. • Harvest Technique: Whole plant harvested, inspected, and prepared for controlled drying. • Drying: Slow, careful drying in a separate, stable environment to preserve aroma, terpenes, and cannabinoids while minimizing risk. Even though bud rot forced an early cut, the flowers are still dense, fragrant, and high quality. Their resilience and beauty deserve celebration. ⸻ 🔬 Educational Notes • Bud rot prevention & learning: This week reinforces how crucial airflow, humidity management, and daily inspection are during dense flower stages. • Whole-plant drying: Allows moisture to equalize gradually between stems and buds, preserving terpenes and flavonoids while keeping the product safe. • Environmental awareness: Temperature spikes, stagnant airflow, or dense canopy zones can quickly create pockets for mold — constant monitoring is essential. ⸻ 🌟 Closing Thoughts Week 7 is about resilience, lessons, and triumph over challenges. The Lava Cakes showed their strength even under pressure but needed to be harvested early, so we did it, no fears this is the only way and the way to save the rest of the closet sharing girls We want to celebrate the journey, from seed to harvest, and thank everyone following along for learning and growing with us. The next report will focus entirely on drying, trimming, and tasting — the final step where we get to enjoy the fruits of all the care, attention, and love put into these girls. 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. • GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial • Instagram: https://www.instagram.com/dogdoctorofficial/ • YouTube: https://www.youtube.com/@dogdoctorofficial ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: • Genetics, gear, nutrients, and more – Zamnesia: https://www.zamnesia.com/ • Environmental control & automation – TrolMaster: https://www.trolmaster.eu/ • Advanced LED lighting – Future of Grow: https://www.futureofgrow.com/ • Root and growth nutrition – Aptus Holland: https://aptus-holland.com/ • Nutrient systems & boosters – Plagron: https://plagron.com/en/ • Soil & substrate excellence – PRO-MIX BX: https://www.pthorticulture.com/en-us/products/pro-mix-bx-mycorrhizae • Curing and storage – Grove Bags: https://grovebags.com/ ⸻ We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 P.S. – Heavy Fruits & Harvest Decision One of the key reasons we decided to harvest Lava Cake #1 this week was how heavy the colas had become. The flowers were so dense and weighty that some branches were starting to bend, snap, and strain under the load. While this is a testament to the plant’s vigor and genetics, it also increased the risk of further bud rot and damage, making an early, careful harvest the safest and most sensible choice. Even under pressure, these girls delivered impressive structure, weight, and resin coverage, proving their strength and quality until the very last moment. Thank you all for being here with me, see you all on the next report, Growers Love to All and never stop believing 🙏🙏🙏
Likes
40
Share
Our Zamnesia autoflowers have been on their journey through the magical flowering period for a while now, this is the second week of flowering considering that autoflowers still flower spontaneously some sooner than others but all around the 3rd-4th week. . ---- The general environmental conditions are good, the heat has increased a bit more but for the first weeks of flowering it is not a big problem, let's remember to never exceed 27 degrees centigrade in the last 4 weeks to avoid compromising the quality of the flowers. If necessary open the growbox but never let it exceed 27-30 degrees where 30 is already a lot. The positive thing is that as soon as the lights go out the change is already somewhat visible and as autumn progresses we will also improve. The humidity is fluctuating but we try to control it with two dehumidifiers when necessary, pushing both of them possibly not into the growbox but directly into the room. (I dehumidify the room and the air in the growbox should also be dehumidified) --- Here we are at very high levels. I have two Blue Cheese one a little taller and one a little smaller and super resinous already now - The autoflowering ones are good but please, try the latest generation F1 Hybrids. Plant, tall, vigorous, healthy really compliments for this strain. It is forming buds super fast only the Sticky Beast is behind it incredible the photos are only at the 5th week and look a bit ... --- Fertilization program - The fertilizers are always Plagron and I'm following the table that I generated on the site depending on the chosen substrate. Create your own card and follow it, never be presumptuous my friend as I have been in the past, follow the card and look at the plants, not all need the same amount of fertilizer. We have come to the time to give a good dose of iron in the first weeks of flowering, already of race life not sprayed but mixed with fertilizers. We then added the power buds to stimulate the birth and development of flowers. ---- https://plagron.com/it - Power Roots - 1ml/l - Alga Bloom - 4 ml/l - Pure Zym - 1 ml/l - Sugar Royal - 1ml/l - Vita Race - 5 ml/l - Power Buds 1ml/l is now added i have to tribute more than something to this bad guy! --- The 100% Organic pack by Plagron can be found on Zamnesia at the link: https://www.zamnesia.io/it/11457-pla gron-easy-pack-natural.html --- Now dehumidifier running keeping the range from 45 to 55% // Strain Description // If you were looking for a reliable, versatile and accessible strain, here it is. Blue Cheese F1 Automatic by Zamnesia Seeds uses F1 genetics to produce uniform, rewarding and easy-to-grow plants. This strain stays small, so you will have no problem finding a place to grow it. After just 10 weeks from seed, you can enjoy tasty buds with relaxing effects. - Strain — Get a seed of this fantastic strain - https://www.zamnesia.io/it/10673-zamnesia-seeds-blue-cheese-f1-automatic.html - Growbox and air sistem --- https://www.secretjardin.com/ - Light — P2000 - https://www.viparspectra.com - Music and sound --- I made my girls listen to 432hz frequencies and music from www.radionula.com - Z --- You can find these seeds, much more from the world of cannabis, mushrooms and an incredible series of accessories and gadgets on the reference site not only mine but of many growers ---- https://www.zamnesia.io
Likes
8
Share
@Aldo90
Follow
I was going to upload the process, but the wiser side of me said no. So I've edited it out and some of the evaporation process can be seen. Bho/wax/honey whatever we care to call it
Likes
8
Share
Been a hot week! She’s doing great— rain has washed her out a bit so I did a little dry amendment! ✌️🏻💚🌿💨
Likes
120
Share
The Harvest Prelude: After a patient wait and 48 hours of darkness, the moment arrived. The Tropical Tangie Lego Ninja, standing proudly like a silent guardian, was ready for the grand harvest. The sound of each cut echoed through the grow space, reminiscent of felling a mighty tree. The compact structure of the buds was awe-inspiring, a testament to the ninja's disciplined growth. The Lego Ninja, like a stoic warrior, was then hung upside down, beginning a two-week drying ritual. Maintaining an ambient temperature of around 21°C and a relative humidity of 60%, this slow-drying process allowed the buds to retain their essence, preserving the symphony of terpenes and cannabinoids. The trimming phase unfolded like a fragrant masterpiece. Each bud, adorned with a glistening layer of resin, transformed the trimming process into a sensory delight. The zesty aroma of oranges enveloped the room, a tangible expression of the tropical lineage. The compact buds made every snip a careful dance, revealing an abundance of frosty trichomes. The moment of reckoning arrived with the scale's unveiling. The Tropical Tangie Lego Ninja, from a single plant, bestowed upon me 309 grams of dried medicine. Each gram was a treasure trove of cannabinoids, a promise of euphoria and relief. The sheer compactness of the buds translated into a concentrated potency that left me in awe. In parallel, the clones, nurtured with equal care, showcased a fascinating divergence. A twist in the tale unfolded as the intense oranges of the mother transitioned into vibrant tangerines. This unique expression, I believe, was a testament to the clones weathering a summer heatwave differently, bringing forth a distinct personality. The clones, resilient and generous, gifted me a bountiful 549 grams of pure joy. This now my keeper of the garden, an embodiment of the Lego Ninja's legacy. The harvest dance, though familiar, carried the nuances of tangerine zest, a refreshing twist that left me eager to explore its intricacies. Both harvests shared a common thread—their resinous abundance. The trim bin, akin to a treasure chest, gleamed with golden trichomes and fragrant joy. Sticky fingers became a badge of honor, a tangible connection to the resinous richness that filled the room. Shout Outs: No harvest report is complete without expressions of gratitude. A special nod to @DutchPassion_Official for crafting the genetic marvel that is the Tropical Tangie Lego Ninja. Their expertise paved the way for this epic journey, and I tip my hat in acknowledgment. In conclusion: As the dust settles on this epic harvest saga, my heart brims with happiness and excitement. The Tropical Tangie Lego Ninja has proven itself not just as a plant but as a living masterpiece. Stay tuned for the smoke report, where we delve into the true essence of this botanical ninja's legacy. Until then, fellow cultivators, may your gardens flourish, and your harvests be as bountiful as the joy they bring. As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and blessed with you all in my life<3 <3 <3 #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience With true love comes happiness <3 <3 <3 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3 <3 <3 Friendly reminder all you see here is pure research and for educational purposes only <3 <3 <3 Growers Love To you All <3 <3 <3 P.S- I must extend my sincerest apologies for the missing video reports. Regrettably, Grow Diaries is still facing some technical issues that are preventing me from uploading them. Rest assured, as soon as the situation is resolved, I'll share those videos to give you an even closer look at this fascinating journey. or in my case apparently GD dont let me do uploads over 100mb with is super small file if you working and editing videos , doing my best here to upload them all but GD is not making my life easy on this <3 <3 <3
Likes
48
Share
Feb. 17 Ph 7.5 Moist - plucked all the bad leaves that were ready - Removed all the dead leaves - 3 gal of water ph of 6.4 + 15 ml big bloom + 20 ml tiger bloom + 9ml apple cider vinegar + 30ml blackstrap molasses unsulphured - Light burn seems to be the #1 problem, then ph fluctuations and nutrient burn - I think i held the measuring cup a little awkward most feedings instead of having it on a level surface and I probably overfed by 5ml each time - Most of the bottom leaves are green but have burnt tips, they are usually pretty attached - the middle section has lots of dead leaves but they are tiny little ones that have burnt and fallen off - the top leaves are all yellow on plant 1, with burnt tips, clawing up, very red stems, and are fairly easy to pluck off, not much effort on most - the most green areas are semi-shaded and off on the edges of the tent, and all the shaded areas remained green - Therefore, I would say my #1 problem was light burn, which made the ph fluctuations worse, nutrient deficiencies worse, and i over compensated and did not measure precisely causing nutrient burn - there is also some wind burn on the bottom areas - all in all the buds are developing nicely and bulking up decent amounts on plant 1, especially with all the topping - good trichomes coming out - plant 2 has different light burn but the leaves are praying up, and pointing up much more, more rusting also but they are not easy at all to pull off - the buds on plant 2 are also not growing nearly as well but the trichomes seem nicer and it seems to have more - the buds hopefully are more dense despite being small, they do look compact though - roughly 100 bud sites visible from the top of the canopy feb. 18 - ph. 7.2 - the clawing up and yellowing and burning of the tips has continued, likely past problems continuing to persist - these problems really only exist on the top set of leaves, which always brings me back to light burn - plucked another 10-15 clawed and burnt leaves from plant 1 - the buds got bigger, and the trichomes continue to pack on - seeing more promising growth/ recovery from plant 2 - trichomes appear to be quite clear, no signs of amber - The crop king seeds guide suggests 8 weeks of flowering time, we are a couple days into week 7 right now but the pistils are still about 60% white and somewhat straight, and the trichomes are quite clear. This would lead me to believe about 2 full weeks is left and likely closer to 2.5 weeks. - Trying to plan out my flush, leaving me a full 7-10 days to have the plants finish their nutrients, that flush would best occur at the mid point next week - I am expecting the trichomes to be cloudy by mid week 8, around feb. 25, I would flush them, and look to harvest 7-10 days later, around mar. 4-8 feb. 19 - ph 6.8 - moist - definitely bulked up more, plant 2 is back and growing strong, damage on top canopy continues to burn and curl, yellowing a growing splotchy brown spots, but I am very confident that this is past damage from light burn which has since been fixed by dropping the watts down by 140 - more pistils are going orange feb. 20 - buds fatting up really nice Feb. 21 - Daytime temps reduced to low 70s feb.22 - ph. 7.5 - moist - will water tomorrow - trichomes not yet fully cloudy - mostly orange pistils - mostly curled inward pistils, lower down popcorn still white and straight - excellent trichomes on plant 2 - will feed tomorrow then I expect the next thing will be to flush so this will likely be the last feed - daytime temps now 70-77 - nightime 65 +/-1F feb. 23 - plants look very thirsty, leave shriveling from before but hanging down and not perky at all - Dirt is very dry, moisture meter reads moist 5/10 - Ph: 7.6 - The plant is very hungry - Some noticeable stretching or just more visible now - Buds look to continue getting fatter and look really nice - 4 gal of water ph = + 22ml of big bloom + 30ml of tiger bloom + 30ml of blackstrap molasses + 9ml of apple cider vinegar - plucked more super dead leaves - Expected dates: - feb. 25 (week 8) - expected cloudy trichomes: - feb. 25 (week 8) - expected flush date: - feb. 25 - expected harvest date - mar. 4-8 Specifications:😎👇 Seeds: - 2x White Widow feminized seeds from Crop King Seed Tent: - 4x4x6 Mammoth Grow tent LED: - 2x Spider Farmer SF1000 LED for veg - 4x Spider Farmer SF1000 LED for flower (190 watts - 50-40-50-50 back left, back right, front left, front right) Pots: - 2x 0.5 L starter pots - 2x 5 gal smart pots after transplant Soil: - Pro-mix containing mycorrhizae and perlite, used for starter pots and mixed at roughly 1:3 ratio with Ocean Forest - Fox Farm Ocean Forest soil, used in the 5 gallon pots and mixed with roughly 3:1 ratio with pro-mix - note: pro mix was mixed thoroughly with ocean forest in the 5 gal pot, then pro-mix was used on the top layer, in and around where the transplant will be to help the early veg stage avoid getting too "hot" via nutrients. Nutrients: - Fox Farm Big Bloom - Fox Farm Big Grow - Fox Farm Tiger Bloom - Wholesome - Blackstrap organic unsulphured molasses Inline Fans: - AC Infinity CLOUDLINE T6 6" (exhaust) - AC infinity CLOUDLINE S6 6" (active intake) - AC infinity 6" ducting Mini fans: - 2x Wind Devil 6" fans Carbon Filter: - 2x iPower Carbon Filter on both inline fans - note: carbon filter on intake fan as basement had mold issues in furnace room far removed but same floor, some mold issue in other room, cat litter in basement, thus, avoiding all risks and sleeping sound at night :) all mold was killed, scrubbed, cleaned, sprayed, painted, and sprayed again before setting up. Humidifier: - TaoTronics Cool Mist Humidifier Dehumidifier: - Frigidaire 30-Pint 3-Speed Dehumidifier Timers: - 2x VIVOSUN dual Digital Timer - 2x Kuman Digital Timer
Likes
23
Share
Fucking amazing week for those ladies! They are transplanted in 11l pots I have one more to transfer but I have different plans for this 🤩 they have and some dynomyco in the transplanting hole 🕳️
Likes
44
Share
@Roberts
Follow
Casey's Rollex OG has a sweet fruity aroma. She is loaded with frost. She is in the mist of her bulking. Everything is looking good. A few more weeks left and she will be ready for a harvest. Thank you DutchFem Seeds, and Spider Farmer. 🤜🏻🤛🏻🌱❄️ Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. Thank you Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
62
Share
So apart from the really low yields.... Which I expected from 80% Indica dominant strains just not that low considering how dense the Budz were. But I can say my growing skills have been consistently improving and it is showing with each grow. With these ladies I should have definitely put them in a 12Litre pot or smaller and still would have gotten the same results if not better. So I lesson learnt for future grows..... To take into consideration the size pots I'm using on the strains I'm running! 👍🏾 But in all very great smoke, even more excited for the next rows that I have coming with the improvements I will be making. 👍🏾🌱💚 Another thing I will say is that I will be putting more effort into how I document my harvest for you guys.... More pictures, better videos showing off the Budz.... Not many pictures because I done smoked it all 😅😅🔥🔥🔥 but still I want to do better for you guys, I want to give people the best view/review of the strains that I run... The information will help someone that decides they might want to run this strain in the future! Any questions guys just ask away 👊🏾😎
Likes
12
Share
This plant is ready in 50/58days, taste and production is good She fruity and smells like grapefruits! You can smoke it during day because of her talkative effect. She’s easy to grow and don’t need a lot of nuts. I love her and I’m gonna cut another one in few days ! She has a beautiful dark color and purple inside ! Beautiful, strong and tasty ! A must have in your garden !
Likes
22
Share
@Kerbiili
Follow
First week went well and now at first day of week 2 moved her to dwc. Light is dimmed to 50% and DLI is 16. We should start to see some faster grow in couple days.
Likes
92
Share
Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚