Ahhhh what a smell Bloom has started 💚 Ladys are stretching day by day. Soil still moist. Today i build some DIY Co2 Generators.(Next time in Veg) (Day 30) Today i cleaned the tent, Northern Lights#1 is stretching well. Soil still a little moist. Also prepared 10L ph regulated Water. (Day31) Budside getting chunky and very hairy 😇Smell is very good. In my timelaps you can see insane grow over one day. You cant tell that i readjusted LST yesterday (Day 32) Sticky Beast 2 is stretching now, Northern lights 2 still not so much sign's of flower🤨 (Day 33) Looked at my timelaps and the Nortern Lights almost grew 2 cm 🤩 Today i gave them 1250ml Mineralwater ph 6.3-6.5 . Sticky beast still in preflower (Day 34) Did some LST and pruning to my sticky beast now she looks even bigger👌(Day35)

So it seems like she's only grown a tiny amount in height this week but she's bushed out quite a lot. 💪

Dec. 4 - Week 9 begins. Dec. 6 - I removed some dead and dying leaves. Dec. 7 - Photo update. Dec. 10 - Timelapse uploaded. This poor girl, the sometimes infrequent waterings may yet be her demise. In the video after the plant droops the leaves come back much more yellow since they're being sacrificed for the greater good. I've been aware that plants do this for many years, but I think it's still pretty neat to watch happen over just a few seconds.

Overall, this plant was a producer! Easy to grow, no surprises and stayed healthy throughout. 11 weeks from seed to harvest. It was squat, but stacked, so airflow and humidity control were key to preventing powdery mildew or bud rot. Took the nutrients like a champ, didn’t show too many demands. I’d like to run this again to see if I can get them taller, to potentially produce more. Otherwise, a very good, potent strain choice for someone who is short on space, and would do well with a sea of green style…Happy Gardening 🇨🇦👊❤️

Inizio Terza settimana di fioritura 💪🕉️💚.. tutto procede come deve .sono sicurissimo che questa layer cake, sarà fantastica....perfetta per la mia patologia...la meglio medicina per me

It time for push and tuck. I did the feeding for transition ( 1:1:1 ratio). I watch them for about 3 hours, then turn the lights out for 24-36 hours. This depletes the hormone that says veg and switches to flowering. Espoma seed starter mix : 1 TBSP Jobe’s Citrus Fruits : 1 TBSP 3 TBSP earth worm castings 1/4 tsp recharge Aerated for 30 hours at 68 degrees ( nice and frothy 😂😂) 1 gallon of water 750-765 ppms at 1:1:1 ratio. This will last for the first 6-7 days, then we switch to 1:3:2 ratio. I will list what I use for 1:3:2 as it will change from week to week. 10-18 Lights are out for 30 hours and we will see how they look. Lights go back on at 6am EST. 10-19 The lights are kicking. Did some tucking. I did 30 hours of dark before introducing 12-12 light schedule. I can see some of the pre-flower hairs sticking out. 8-8-8 at 760 something ppm’s went well. This is the first run I will be hand feeding the plants throughout flower. I relied on dry amendments and had some success, but I think I can push the bar higher having more control over the feedings. I will be doing a total of 8 feedings. 10-22 The trellis is filling up!!! I added photosynthesis plus to the mix and some fulvic/humic acid. All the ladies are praying up.

Día 56 (16/06) La floración sigue avanzando. El olor es espectacular La planta grande huele a Blueberry La planta pequeña huele a Indica de la vieja escuela. Kush, tierra del desierto, pungente... Día 57 (17/06) Riego con 500 ml H2O RO Día 58 (18/06) La planta grande muestra unos cogollos duros como rocas! 😍 Día 59 (19/06) Riego con 500 ml H2O RO Día 60 (20/06) N/A Día 61 (21/06) Riego con 500 ml H2O RO Día 62 (22/06) N/A 🚀 FastBuds 15% DISCOUNT code "NONICK" 2fast4buds.com @fastbuds.official 💦 BioTabs 15% DISCOUNT code "GDBT420" biotabs.nl/en/shop/ @biotabs_official 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE @promixmitch @promixgrowers_unfiltered

Sticky and loud is all I can say! Hopefully whatever damage and burn I have doesn’t hurt my buds too much l! But otherwise they’re stacking up well! Couple more weeks to go!

***Sponsored Grow*** = Medic || https://medicgrow.com || Grow = ***Sponsored Grow*** Not a whole lot is happening this week, still having some PH issues in the medium, I believe this is from the microbial mass I added a while back. A microbe product, PH going into the medium is around 6.5-6.8 and coming out is between 5.5-5.8, so something is acidifying it up. Also noticed the runoff last week was a bit higher at times. So lowered the feed down quite a bit, going in at 1.4EC vs 1.8 will bump it up to 1.5 and 1.6 in the next few weeks. I also added in a bit of a PK booster. nothing to crazy only 60ppm worth on a total allowance of 700PPM Lights now running at 100% with V1 spectrum, decided to go with 100% now vs after stretch, will see how it works out. Till next week. ***Sponsored Grow*** Official Website: https://medicgrow.com/ + https://www.kannabia.com/en Facebook: https://www.facebook.com/medicgrowled + https://www.facebook.com/kannabiaseed/ Twitter: https://twitter.com/medicgrow + https://twitter.com/kannabiaseeds Instagram: https://www.instagram.com/medicgrow420/ + https://www.instagram.com/kannabiaseedsint YouTube: https://www.youtube.com/channel/UCNmiY4F9z94u-8eGj7R1CSQ + https://www.youtube.com/c/KannabiaSeedCompany Growdiaries: https://growdiaries.com/grower/medicgrowled https://growdiaries.com/grow-lights/medic-grow + https://growdiaries.com/grower/kannabia https://growdiaries.com/seedbank/kannabia

Gorilla Cookies is doing great. 6 days into flowering. She is growing fast. I increased light from 30 to 60 percent at switch. The G3000 is doing good. Some good stretching should start up soon. Everything is looking great. Thank you Spider Farmer, and Pure Instinto Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer G300w: https://amzn.to/3S2zvsd Spider Farmer 10X20 Heat Mat Kit - https://amz.fun/lsa0J Spider Farmer Amazon Store: https://www.amazon.com/spiderfarmer Spider Farmer Official Site: https://spider-farmer.com Discount code: saveurcash (stackable)

Die Blüten haben deutlich an Volumen gewonnen. An fast allen Pflanzen werden die ersten unteren Segelblätter gelb. So lange es bei diesen bleibt, werde ich nicht die Düngermenge erhöhen. Ich warte bis sie fast selbstständig abfallen und nehme sie weg. Leider ist das Wetter nicht auf unserer Seite. Da geht bestimmt noch mehr. Ein paar Wochen haben sie noch. Zum Ende der Woche hat der Wasserbedarf deutlich abgenommen. An dem Punkt habe ich auch den Big Bud Dünger abgesetzt. Die nächste Zeit werde ich nochmals das Batboost und Bloom hochfahren.

Plant is yellowing slightly. Thought to get this girl enough nutrients in a solocup. But. Shes still growing, so we're gonna ride it out..

Week 8 for the OG Kush and blueberry. Week 6 on the feed schedule for the Super Lemon haze. Last week of feed for the OG's and blueberry. The OG's are super thick, sticky and stank so nice! The blueberry is very sticky, smell's nice but the buds are not as big as I expected them to be.

Week 6 of flower, the buds are fattening up and triching out. The terps are super sweet and very potent smelling. I haven't seen very many nanners or balls lately, but I have seen them popping through the buds occasionally. I still inspect daily, but some days I don't find any, so I hope it won't give me too many seeds. I did notice that the bud that gets the most intense light has started having tips pointed upwards and flipping its leaves. I attributed this to heat stress, so I moved that light over bit. Day 38 update: this last week I was only watering with distilled water and the yellowing has progressed, so I assume I was right about the nitrogen deficiency noted a couple weeks back. Today I top-fed with a homemade fast acting high nitrogen organic fertilizer, we will see if this helps. Also nothing in my current flowering feeding regime has a lot of nitrogen, so I think this will likely solve the problems. I have also decided to give them an extra 15 minutes darkness for a total of 13.25 hours darkness, 7.5 minutes extra on each end, tell them its almost time to finish with ~4 weeks left. Day 40 update: still been pulling herm balls and nanners off the big one, the others seem to have stopped, but i still check them daily. Gonna be slightly seeded for sure, but I hope not too much. Also, the yellowing seems to have been managed after that nitrogen feed.

Perdón por hablar en los videos, se los mando a un amigo para comentarle mis avances, esta semana la floración se ve bien marcada y todas las colas y nudos se empezaron a llenar de pelitos (una beieza jaja) Constantemente acomodo los hilos del lst para obtener una optima penetración de la luz. Rocié con una mezcla de jabón potásico, canela y neem (para evitar plagas) y unas gotitas de trichodermas (para evitar hongos) Por si no lo mencioné, regulo el ph del agua con un liquido reductor de kawsay

Things are looking good. Another thing I learned on this batch, SOAK the rockwool a few days before, so the water can drain out. My problem, and did it before, but have better control this time. The problem is I soak the rockwool, then the clones are drowning in the cubes because they are so wet, and take a week to begin to dry out. Just gave them water, so they ben drying for over a week, with no water, thus no fresh oxygenated water. Also as you will see in the video, I added new QB288 lights. There on a 480-1750b, so I need to start with 3 at 3000, and will be buying 2 more, 1 at 4000 and another at 3000, thus will have 5 QB 288 in a 4x4 :)

Absolutely blown away by the new 2025 setup, prev ran 3 tents 😂, switched to AC Ifinity 2,4 x 1,2 single tent, 3 x 150 or 6“ fans. Fans all port outside, 2 exhaust with yet uncoupled carbon filters, 1 inlet with pollen filter. 6-7 air push fans (not all yet on 😂). SpiderFarmer 16L humidifier, inkbird RH control, inkbird heat control, heater, trotek dehumidifier (12L) with drain line and reservoir. Blumat system with RO fed 20L water butt, each pot with 3 long ceramic blumats. Data logger from SensorPush including WiFi hub and 4 sensors. One in cellar room (lung room), one above each plant canopy. Setup logger n sensors and track VPD. System running itself

Le 42e jour ce passe très bien. Les plantes sont au milieu de la prefloraison et ne vont pas tarder à arrêter leurs croissance pour se concentrer sur les bourgeons ainsi j'adapte l'alimentation au circonstances. J'ai rattrapé l'erreur de pH même si cela reste précaire les plantes se portent dans l'ensemble très bien 🌱🙏

Using a Rhaspberry Pi 4 to automate the watering and a TP-link 105 smart plug to automate the Viparspectra P2000 LED grow light. You can see how I automated it here: https://hackaday.io/project/188129-rhaspberry-pi4-basic-watering-system-for-balcony Basically, this is an "Automated Watering how-to Guide for Dummies" - as simple as technically possible. You still require some basic command line expertise, but the steps have been proven and I provide links to the gear I used AND the Node Red code, making this EASIER than anything else I've seen online.