Recommended
Likes
Comments
Share
@andocbd
Follow
Germinacion exitosa, pasarán a maceteros de 3L , los cuales serán las definitivas para este cultivo, pretendo darle 21 días de crecimiento para luego pasar a florar.
Likes
6
Share
Day 94. Switched to begin flushing. Two plants at about 50% cloudy 50% clear, two others 80% clear. One weirdo one I didn't bother looking at. Still trucking along. Hoping to chop soon- started some GDPxOG, Gorilla Girl, and Chemdog (all photos) that are sitting in the understory. Smell is okay, sweet but nothing to write home about. First cut plant one needs time to cure. Second chopped plants are going through dry trim process. Looks like I can remove them from the stems tomorrow given today's test. Excited to see where they land in weight
Likes
14
Share
Hey guy and gals, So, I was going to prune the girls tomorrow, but a mate dropped a half over, got stoned and decide, Bugger It!, so we hooked in today. I did take some after shots. Should have done 'before and after, but, I was STONED !' The girls look happier, more sprightly, less 'HEAVY'. Saved the biggest and best fan leaf for a mate. He is amazed at the leaf size. Then earlier today, when he dropped in ;-) , he had a look and near dropped. Big Bud has so many nodes, he was shocked. The FIMing/Topping, whichever I did has done amazing things. On a side note, I haven't grown heaps before, so this grow is amazing me. Previous grows got small buds, small amount, only just covering the cost of my setup (Hydro at the time and tent). I now have a BIGGER tent, am using SOIL and they are thriving. Personally, I think the water is the major factor, but also my 'dedication'. I check the girls 2-3, maybe 5 times a day (viewing port). Regular PH, moisture and such checks. I even put a sticky fly strip in there, as a bloody fly got in. This grow, besides the constant checking, I have Fim'd/Top'd, I have pruned them to promote growth. Basically, I have learned heaps, both from here and videos. I have re-read pretty much everything I read previously, tweaked a little and it seems to be working. Northern Lights is still a week or a bit more away from a prune, I think, then we will give them a couple more weeks and turn them to flower. I am aiming for a Late May/Mid June harvest, then a month in jars to cure. All going well, I will have a heap of and great choice, for my birthday in July :-D So, feel free to let me know how they look. Shoot through any advice. Hope you are enjoying my story :-) Have just uploaded some more photos, showing the girls, after their beauty treatment :-) All are looking fantastic, Hope you like the images. Just discovered Vipar Spectra have created a 1000W LED which uses a micro 100W to achieve this. The Vipar Spectra Pro Series P1000. I will be looking to buy myself one for my Birthday in July.
Processing
Likes
2
Share
Likes
25
Share
@DrGanj
Follow
This plant was a dream to grow, wish I'd taken cuts. Halfway through dry at 7 days. Drying at 55 - 60 % RH and 17 - 19 degrees C. I anticipate she'll be done between 10 - 14 days total dry time and I'll then trim and update weights on this Harvest. 133.75g total after trim. She's a nice smoke, very happy.
Likes
5
Share
Yesterday i took off some Leafs down there. Looks Like a Bouquet now 😄 She's responding great to the Training i have her. I'm pretty exited how she'll do in the Future weeks 🤙🏽
Likes
8
Share
📆 Semana 2 El tiempo no está siendo favorable, con días nublados y humedad que ralentizan un poco el crecimiento. Aun así, la pequeña sigue adelante con garra 🌱, manteniendo su estructura compacta y sin espigamiento. Continúa en la maceta de 2L, con riegos suaves y pH controlado en 6.5 💧. A pesar del clima, sigue sacando nuevas hojitas y mostrando un verde saludable. ¡Seguimos creciendo fuerte! 💪
Likes
31
Share
So this strain was a wonder to grow, she grew fast and big, responded very well to topping (producing 4 tops, one of which broke) and producing a decent yield! I forgot to weigh again the wet weight but will weigh all once it's dried. Correct me if I'm wrong but it looks kinda big for an auto, I'm quite proud of this grow! Will update next week with a dry weight and a smoke update. Happy growing motherpluckers 🌱👍😊 UPDATE 28.08 THIS IS SOME STRONG SHIT! After one joint I feel incredibly stoned, makes me happy, hungry and sleepy. It is so smooth to smoke has a beautiful orange aroma, can't wait to taste a cured bud in a few weeks. Final weight (including the little test buds) was around 85 grams! Nearly double my last plant! If anyone knows anything about bakery seed Co. Please let me know as it's impossible to find information on the Web and this was a free seed from grizzlys that came with my ggg pack. Really happy! Keep growing and push on. 🌱😊
Likes
2
Share
Likes
8
Share
@DWCpaqy
Follow
Week has been good. I'm not sure about the ppm and salt around roots, they are a little brown. Wounder if I should flush them and start again with nutrient? And see some of the last picture, it's pretty thigth between the leaf and buds, should I but some of the leaf? Ppm 1400-1600 Temp 22 to 31 Temp in water 20-26 Humidity 50-60%
Likes
14
Share
@Kreewl
Follow
Bienvenidos de nuevo! Esta semana he seguido regando con agua hasta el corte, no he dejado que las hojas se pongan más amarillas porque los tricomas habían llegado al punto de madurez que más me gusta. Se nota que cyco tiene productos muy buenos por el simple echo de que después de dos semanas de agua siguen bastante verdes. Actualizo la semana como semana de floracion simplemente porque no tomo pesos en húmedo, después de un par de días colgadas pasaré a manicurarlas, y para cuando seque subiré pesos. Creía que sacaría flores extrañas por el calor, o que tendría algún problema más serio a la hora de cultivar en esta época,todavía falta secarla bien, pero a simple vista creo que me acerco al peso de la anterior cosecha, ojalá. Subiré más fotos en cuanto tenga la manicura echa, un saludo!
Likes
167
Share
@PapaNugs
Follow
Was this girls first week in flower! I don't want her growing out of this tent space so I flipped her early. In the meantime, I've been low stress training her outwards to fill up the tent. My ties are holding her down and will continue for another week. Hopefully everything will be level for next week!! Lights at 100% Here are the lights details: Medic Grow Mini Sun-2 150W LED Model: MN150-022 Spectrum mode: V1 Efficacy: 2.8 umol/J Thanks for stopping by! You can find the light on Grow Diaries: https://growdiaries.com/grow-lights/medic-grow/mini-sun-2-150-watts You can find the light on Medic Grow's website: https://medicgrow.com/
Likes
11
Share
@Kirsten
Follow
☆♡ Gorilla Cookies: I've noticed a leaf fell off the bottom. I think I may've overdone the nutes. She's growing tremendously. I top dressed with the below, as the rest of my plants. I will only use PH'd water for the next several waterings, probably with Biosys or seaweed. ♡☆ 16.2.25: I decided to check out the lower canopies of all plants to see if I need to get rid of any foliage. I did get rid of a few small branches and leaves. However, whilst I was doing this, I saw more garden pegs from my LST remaining. There were about 6 or more in Pink Mist alone. Additionally, on Watermelon, there were some left in, too. I'm so annoyed to see that because the plants are really stretching, and I could've potentially disrupted this by leaving the pegs in for all this time without realising it. 🤞 that I haven't compromised things too much. We'll see. I watered today with 2ltrs of dechlorinated water PH'd to 6.3 containing the following nutrients; ♡ .8g Green Leaf Nutrients PK booster ♡ .5g Ecothrive Biosys I ordered quite a few things for the garden. I got Greenleaf Nutrients Sea K(elp) and Mega Crop Parts A+B. To go with their PK Booster I got last month. I'm excited to try it all together. Next run, maybe just using these. We'll see how it goes. 18.2.25: The plants are going crazy for water! Everything is getting used right up so fast! Today, I decided to add some more Black Strap Molasses to add some carbs and other micronutrients. I'll add the jar with the label in the photos section above. I watered a very small amount to each plant. What I put in: ♡ Black strap molasses 150g ♡ 2g Sea K(elp) Greenleaf nutrients. I dissolved everything in 4ltrs of dechlorinated water PH'd to 6.4. 19.2.25: I received the majority of the garden purchases that I made. I'm still waiting for the Ecothrive Life Cycle. I wanted to top dress, but it's been delayed unfortunately. I am using my Greenleaf nutrients products which I bought on Amazon. I got the Mega Crop 2 part system Part A and Part B. I have the Sea K(elp), and the bud explosion PK booster. I really wanted to get some of their sweet candy asking read many positive reviews. Unfortunately, for me, this is unavailable to buy currently. So that's a little disappointing. I needed to do a good watering so when my nutes were delivered today, I got excited 🤗 I watered 2ltrs of dechlorinated water per plant, PH'd to 6.4, containing the following nutrients: ♡ 1g Mega Crop Part A ♡ 1g Mega Crop Part B ♡ .5g Sea K(elp). The plants drank this up within a few hours. I'm going to try and hold off on watering in hopes that my Ecothrive Life Cycle will arrive so I can top dress and water it in then. 20.2.25: My Ecothrive Life Cycle arrived yesterday, and the plants are ready for their top dress and a good watering in. I have some Biobizz Light Mix, Canna Coco,and perlite. I'm going to use this as a base to mix my amendments in. I'm going to fill my 5 gallon bucket with about 4.5 gallons of my top dress mix. I will distribute this across 6, 4-5 gallon pots. Then I will water in well with Greenleaf nutrients Mega Crop Parts A+B and Sea K(elp). I've made a crude attempt to video mixing my top dress. Don't listen to the audio. lol, my YouTube didn't stop playing whilst I recorded this 😂 So anyway, I added the following amendments to the above base mix of 4.5 gallons; ♡ 3 TBSP Ecothrive Life Cycle ♡ 3 TBSP Vitalink Bat Guano ♡ 3 TBSP Ecothrive Charge ♡ 1 TBSP RHS Mycorrhizal Fungi granules ♡ 6 TBSP Ground Cinnamon.
Likes
15
Share
@greenAF
Follow
Harvested D58 2nd run of this girl, higher yield and quality this time around and the 1st time was great, super happy. LOL just realized i put in the dry bud weight, in the wet mud section, somehow i do that almost every time Dried weight 356g retail quality bud and another 1-2z of trim/larf for oil
Likes
49
Share
@AsNoriu
Follow
Day 67. Early harvest, but still will be nice smoke, not a lot tho ;))) Thank You Zamnesia Team for a chance to grow your strains ! Happy Growing !
Likes
14
Share
@DTHEREID
Follow
She’s flawless with no problems, can’t wait to see what week 4 brings for flower development! Week 5 I’ll be running koolbloom powder. 30 inches tall after being laid down and trained. Have to conserve room for height restrictions in my space. Starting to get a bit bigger and the structure of the bud sites are pretty solid.
Likes
14
Share
I AM GROWING ALL AUTOFLOWER STRAINS IN THE 8X8 GROW TENT 👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 CHECK OUT MY OTHER DIARIES TO SEE WHAT BREEDERS AND STRAINS I AM GROWING 👍 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
21
Share
@cadur
Follow
Nothing much to report. Buds gradually thickening up. Smells gorgeous! Will be a shame to cut her down...the chop is coming though. I'm not sure the yield will be that good as she didn't stretch much but time will tell...
Likes
80
Share
@Hawkbo
Follow
One of these is killin it, the tallest plant in the video is #3 it's almost 4 feet. The other ones are doing good too but the big one is impressive. I kept a cut of each I'll prob run them before these even finish. Added some tnb co2 for a boost.