Likes
Comments
Share
Adaptándose al transplante y cambio de ambiente
Likes
Comments
Share
Info relevante: Chá aerado (ver Video) Registos/notas: 28/05/2025 - Estão a crescer de forma consistente até agora a genética parece bem estável, reguei ontem (dia 27/05/2025) e começei hoje a preparar o chá aerado para aplicar daqui a 2 dias, para desenvolver a microbiota do solo, vou inocular o solo com Trichoderma harzianum junto no chá aerado, para promover um melhor ambiente rizosférico. 31/05/2025 - Todas reagiram bem ao chá aerado, desde então não foi regada mais, aumentei o fluxo de ar e por isso coloquei alguns suportes para prevenir quedas e trabalhar a grossura do caule, deixo mais algumas fotos.
Likes
6
Share
@IamCy
Follow
Rolling into week 7. Time to dial down the nutes and start my UVB regiment. I use Reptisun 10.0 bulbs due to LED UV's giving far less than optimal performance. Reptisun 5.0 bulbs work 2. I only run them from week 7 to flush and for only 3 hours a day within the current light cycle. Update day 45: After doing a trichome check, it finished EARLY!! Time to do a quick flush then harvest. I was going to add the nutes to the fresh water today 😂😂
Likes
24
Share
Atemberaubend wie Sie nochmal hochgekommen ist und Seitentriebe ausgebildet hat. Dafür das Sie als "Überwiegend Indica" ausgeschrieben ist, ein Monster von Pflanze. Um den unteren Trieben für den Stretch nochmal die Chance zu geben, habe ich die großen Fächerblätter entfernt. Präventiv Neemöl gesprüht, weil ich ein paar Freunde gesehen habe. Spraymix alle 2 Tage. Heute wird auch die Lampe auf 12/12 umgestellt.
Likes
13
Share
Welcome to week twelve for Brenda, an Auto Divine Rapier by Divine Seeds. The most frosty girl in the polytunnel by a long margin. Very exicted for this one to finish. Day 79 - photographed Day 80 - video'd Thanks to Shogun for providing the nutrition for this grow, and to Divine Seeds for providing the seeds. If you are not already a part of the cannabis community on X (formerly Twitter), I recommend joining! I have the same username over there.
Likes
8
Share
She's getting in shape little by little and I hope to achieve the best shape possible before I changed the light cycle to flower, hope to get a nice and simethric bush! Let's see what we can do! 💚❤️💛
Likes
13
Share
Got super busy and failed to take many photos or videos, also there hasn't been much going on this week in the garden!
Likes
130
Share
Kannabia Seed , Sativa Dream High everyone 👋 another week in the books and the ladies are looking pretty good 👍 I'm not sure on training for them yet but it's almost time to start 😆 this Sativa Dream has a bit of a mutation going but is still growing fast 😀 I'll have to decide what I'm doing very soon. I received and installed the new UR45 from Mars Hydro they are UV-IR supplement light bars designed to fit the Fc6500 and Fc8000 I'm excited about having them in my growroom. Check out my Instagram if you want to see closer pictures of them installed. Mars-Hydro.com discount code " Cyrus " Thank you Mars Hydro and Kannabia Seed Company
Likes
12
Share
@Naujas
Follow
The girl's upper leaves look terrible :( I didn't manage to give her more potassium in time :( Well, the flowers bloomed really well, they are not small, and there is definitely a lot of sugar on them :) the smell is also amazing :) apart from the upper leaves, everything looks pretty good :) when I cut her, her image will change :) I think she has max 2 weeks left ;)
Likes
41
Share
@Lukush
Follow
Hey growmies all is good and mi baby girls are loving life!! Gonna start giving them some nuts in a couple days 👍 Thanks for passing along have a good one growmies. Check this Led out on the website 💪👍💪 https://marshydro.eu/products/mars-hydro-sp-6500-led-grow-light/ SP6500, as one of the huge single bar LED grow lights, installed with top quality Samsung LM301B diodes, designed with enhanced red in broad-spectrum light, emits the highest central PPF and has the superb penetration that its major applications are for high-wire plants and greenhouses. Wattage – 650w Veg Coverage – 4×5 ft Flower Coverage – 3×5 ft Featuring a thick aluminium passive heat sink and densely arranged chips, the SP Series provides high efficacy but low heat output while minimizing obstruction to natural LIGHT!
Likes
30
Share
@Roberts
Follow
Runtz auto is doing okay. I did more lst, and some selective defoliation on her today. Everything is looking better after her rough start. Not much else to report at the moment. Thank you Zamnesia, Plagron, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.
Likes
15
Share
@Uwish
Follow
The run continues nicely, we still had some temperatures of nutritive solution a little high with the heat of Danielle. It drops drastically in 2 days so I will finally finish this growth in the calm one and will be able to begin my bloom on September 24th. I apply hydrogen peroxide at a rate of 0.5ML/L, twice a week as a treatment. The root Rot X is used every ten days when changing the nutritive solution. I put less water in my system, in order to create a wet zone and a dry zone, I make sure that the roots are always immersed of course. As soon as the temperature drops, I will switch to 800 ppfd for the end of growth and depending on the evolution of the plants I may add some sensi grow a and b to increase the ec a little. If you are attentive, you will observe on the tips of the leaves or even on the leaves, spots of burns or deficiencies, it is simply the consequence of the pythium a few days earlier. The last growth update will be around September 24/25.
Likes
24
Share
@baboone
Follow
Yeah pretty decent this week. It didn't grow loads but it's looking pretty green and healthy. Changed the nutrients to bloom gradually. I think it's gonna turn into a weed bonzi which will be cool. She wasn't showing any sign of flowering just yet and is probably transitioning, so I thought Id do a quick defoliation to get the light on the lower bud sites and better air flow. Any observations, advice or tips are very welcome. Happy to answer questions too. Thanks for looking! Baboon
Processing
Likes
4
Share
Likes
9
Share
♦️ Apliqué la ultima dosis de Delta9,via riego. Hice algo de supercropping y defoliación.Todo ok🤙🏻🤙🏻
Likes
16
Share
@Mrg7667
Follow
About day 38 i am just realizing that i am stupid and been feeding the biogrow for cocoa coir 🤦‍♂️ way iver nuting with soil it says never to go over 1ml/L So i will be flushing for at least 1 or two waterings. Looking for the tip burn to stop spreading and the tips to not look like there clawing
Likes
20
Share
So I was thinking that growth is quite slow in the last two weeks. Then I discovered that the roots were looking weird, and noticed fungus growing on them. So I took the roots out and you can see the problem yourself in the pictures. I removed the bottom part of the roots and I added new coco in the pots, then I placed the girls back. It's been one week now and I can see new roots coming out at the bottom of the pots. The strange thing is that the 2 plants that were healthy(completely white roots) are also having the smallest buds 😒 Btw, I also flushed them with FloraKleen and H2O2(10%, 2ml/l). Then started feeding again, but with reduced nutrients - 630ppm I also elevated the pots, so they don't touch the trays anymore and started using the dehumidifier(50% humidity). I also bought a RO system and started using RO water instead of rainwater. Damn, I hope the harvest will look decent!
Likes
23
Share
@GrowSmith
Follow
Last week on nutes now Doubled in size as per dragon force
Likes
14
Share
@Chi_K24
Follow
Hey folks. Into week 11 and the ladies are doing very well. Recovering slowly from a fungas gnat infestation that I caught pretty late. I got careless and wasn't really paying attention to the topsoil. Also to boot, this was only an issue once I started to water with molassas. It seem to attract the bugs either via sugar for from the supercharged biosphere. Not sure lol. I treated the topsoil with neem oil drench and applied yellow sticky pads and d.e. powder to the top of the pots. Cheers.