- LAS PLANTAS SIGUEN CON EL MISMO PLAN NUTRICIONAL - NO SE VEN CARENCIAS NI EXCESOS - el hps de 600 MANTIENE MI AMBIENTE SIN MAYORES INCONVENIENTES - EN ESTA SEMANA Y EN LOS ÚLTIMOS DÍAS DE LA SEMANA SE LE APLICO DEFOLIACIÓN

🌿 Lava Cake – Week 5 (First Week Flower) | Pre-Bloom & Heat Talk 🌿 The Lava Cakes have officially stepped into their flowering tent… though, to be fair, they’re still enjoying a little extra veg time before showing pistils. Both phenos are healthy, lush, and stretching beautifully, clearly ready for the show ahead. ⸻ 📸 Photo Studio Glam We took them out for another studio shoot, bright lights, clean background, and every angle showing off their deep greens and perfect branching. Soon, their beauty will be dressed in flowers, but for now, the leaf structure alone is worthy of the spotlight. ⸻ 🌡️ Current Conditions • Room Temp: 31°C • Humidity: 50.3% • VPD: 2.23 kPa • PPFD: 766 µmol/m²/s • Soil EC: ~2.0 • Soil Temp: 25.6°C Yes, the temperature is running hot — AC unit is on the way to lock it back into our ideal zone. ⸻ 💬 Heat in the Grow Room – Risks & Benefits Potential Risks: • Faster substrate drying = more frequent irrigation needed • Higher transpiration rates can stress plants if roots can’t keep up • Slightly increased risk of light stress at high PPFD without proper cooling • Possible reduced terpene retention if sustained into late flower Possible Benefits (short term in veg/pre-flower): • Accelerated metabolism — plants grow and stretch faster • Increased water/nutrient uptake (if well-fed and watered on time) • Can improve CO₂ usage efficiency if levels are high enough Bottom line: As long as they’re hydrated, fed, and ventilated, short bursts of high temp are manageable. But for flowering, we want to keep daytime temps closer to 24–28°C for optimal quality. ⸻ 💧 Watering Strategy We water when the soil dries to about 25% moisture remaining, this encourages: • Stronger root growth searching for water • Better oxygenation of the root zone • Less risk of root rot in warm temps Right now: They’re drinking daily due to the heat, so we’re feeding daily as well. ⸻ Current Feeding (per L of water) • Aptus Regulator – 0.15 ml • Aptus CalMag Boost – 0.25 ml • Aptus All-in-One Liquid – 1 ml • Aptus Top Booster – 0.25 ml With the increased drinking rate, nutrient uptake has increased — meaning no signs of deficiency, just steady lush green. ⸻ 🚀 Looking Ahead • AC installation will stabilize temps, allowing tighter VPD control • First signs of pistils should appear within the next 7–10 days • We’ll begin adjusting feed ratios for early bloom once flowers set • Light intensity will climb further as stretch continues ⸻ 💚 Closing Note: This week is all about momentum, heat or no heat, the Lava Cakes are pushing upward, prepping themselves for a heavy flower load. The environment tweaks are on the way, and we’re building them the perfect stage for their bloom performance. 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. • GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial • Instagram: https://www.instagram.com/dogdoctorofficial/ • YouTube: https://www.youtube.com/@dogdoctorofficial ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: • Genetics, gear, nutrients, and more – Zamnesia: https://www.zamnesia.com/ • Environmental control & automation – TrolMaster: https://www.trolmaster.eu/ • Advanced LED lighting – Future of Grow: https://www.futureofgrow.com/ • Root and growth nutrition – Aptus Holland: https://aptus-holland.com/ • Nutrient systems & boosters – Plagron: https://plagron.com/en/ • Soil & substrate excellence – PRO-MIX BX: https://www.pthorticulture.com/en-us/products/pro-mix-bx-mycorrhizae • Curing and storage – Grove Bags: https://grovebags.com/ ⸻ We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚

Its was great to finally grow my own weed , i felt really good and im so happy with the result , my best choice was to get a experienced guy to help me trought the way , it definitely saved me a lot of time and mistakes , thanks to @bengrowerbr instagram . Now i have two headbangers already flowering on my grow , those are not from any seedbank but they are looking great , i will give her a diarie as well , thanks for being here and lets get medicated!

Documenting the progress after another week. Here's Week 3. Starting to show secondary leaves now coming in. "Acapulco Gold" and "Something Good" seem to be showing the most growth so far (more leaves, sticks in cups). Once they all get to be about as tall as the cups they're growing in, it will probably be time to transplant them into their bigger pots. These solo cups have a small hole for water to drain out as we've been manually feeding them and facing them where there's the most sun. During the day, it is sometimes warm enough to leave them outside. Lately, the air temperature has still been a bit too chilly. Once the air warms up some, we'll be putting about half of these plants in 3.5 gallon fiber pots and the other half in normal plastic pots. In February, we'll we preparing their outdoor growing space where there's plentiful sunshine and low foot traffic. - Rubber Match by Secret Society Seed Co (regular seed)* x1 status: doing fine. - Something Good by Twenty20 Mendocino (feminized) x1 status: doing fine. - Acapulco Gold by Barney's Farm (feminized) x1 status: doing fine. - Purple Lemonade by FastBuds (Auto) x1 status: doing fine. - Skywalker by NASC (feminized) x1 status: doing fine. - Glue Sniffer by Twenty20 Mendocino (feminized) x1 status: doing fine Other seeds in storage: - Girl Scout Cookies - Blueberry Cupcake x MAC1 - Runtz

Grape Octane Auto has sprouted and is looking good. She is getting acclimated and hopefully everything goes smoothly. There is nothing more to report. Thank you ILGM, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.

Fast Eddy Week 4 So ive been doing LST to get better light coverage and intensity on all parts of the plant :) this one was very small and bushy which made it hard to get all leaves a place to sit comfortably... ive also been watering using less water but watering more often to get oxygen to the roots :) these autoflowers dont care what i throw at them. fast eddy is alot smaller than my quick one plant but has a nice veg smell from the cheese x juanita the tearful. cant wait to get into heavy flowering! Finally im hoping to get 20-25g off this plant. and as its medical weed im really excited to try this. if it works then goodbye high thc strains! Thanks for following my diary :) it means alot! happy growing people!

Marijuana cultivation, like any agricultural endeavor, involves various techniques to optimize growth, yield, and potency of the plant. This is the week to make it happen! One such advanced technique is High-Stress Training (HST). HST is employed to control the growth pattern of the marijuana plant, making it more bushy rather than tall. This is beneficial for indoor growers with limited vertical space. Moreover, HST exposes more of the plant's foliage to light, which can lead to enhanced photosynthesis. This results in a plant that can produce more buds, which are denser and more potent. Given that light is a primary energy source for plants, maximizing light exposure can drastically improve the overall quality and quantity of the harvest. Topping is a specific form of HST that involves cutting off the main stem's topmost growth. This method forces the plant to divert its energy and nutrients to the lower branches, promoting the development of multiple main colas instead of a single dominant one. By encouraging a more even canopy, topping ensures that light is distributed more uniformly across the plant. This reduces the chances of having underdeveloped buds at the lower sections of the plant due to light deprivation. Topping also curtails the plant's height, making it more manageable, especially for indoor growers with limited space. HST and topping are integral for modern marijuana growers seeking to enhance their yields. These techniques address the spatial constraints faced by many growers and ensure that the marijuana plant receives optimal light exposure. The end goal of these methodologies is to increase yield and potency, and when done correctly, they can transform a mediocre harvest into a bountiful one. Cultivators who invest time in understanding and implementing these techniques stand to benefit significantly from their marijuana crops.

Did a good thinning out today, took some more clones she is a great plant to clone from grows well under my mars hydro TSL2000. I tied her back a little further took off all the big fan leaf 🍁 and trimmed up to 4th node. I added 1gal of ro water with 1tbs of big bloom, 1tbs of molasses, 1/2 tsp kelp, 1tsp MykosWP, top dressed with 3 tsp magnesium sulfate and 3 tbs of alfalfa meal. She is very strong odor of skunk cross with a slight fruity smell but strong nonetheless.

You don't become confident by shouting affirmations in the mirror, but by having a stack of undeniable proof that you are who you say you are, outwork your self-doubt. Nitrogen fixation is a chemical process by which molecular nitrogen (N2), which has a strong triple covalent bond, is converted into ammonia (NH3) or related nitrogenous compounds, typically in soil or aquatic systems but also in industry. The nitrogen in air is molecular dinitrogen, a relatively nonreactive molecule that is metabolically useless to all but a few microorganisms. Biological nitrogen fixation or diazotrophy is an important microbe-mediated process that converts dinitrogen (N2) gas to ammonia (NH3) using the nitrogenase protein complex (Nif).[2][3] Nitrogen fixation is essential to life because fixed inorganic nitrogen compounds are required for the biosynthesis of all nitrogen-containing organic compounds, such as amino acids and proteins, nucleoside triphosphates and nucleic acids. As part of the nitrogen cycle, it is essential for agriculture and the manufacture of fertilizer. It is also, indirectly, relevant to the manufacture of all nitrogen chemical compounds, which include some explosives, pharmaceuticals, and dyes. Nitrogen fixation is carried out naturally in soil by microorganisms termed diazotrophs that include bacteria, such as Azotobacter, and archaea. Some nitrogen-fixing bacteria have symbiotic relationships with plant groups, especially legumes.[4] Looser non-symbiotic relationships between diazotrophs and plants are often referred to as associative, as seen in nitrogen fixation on rice roots. Nitrogen fixation occurs between some termites and fungi.[5] It occurs naturally in the air by means of NOx production by lightning.[6][7] All biological reactions involving the process of nitrogen fixation are catalyzed by enzymes called nitrogenases.[8] These enzymes contain iron, often with a second metal, usually molybdenum but sometimes vanadium. Green clover (Fixation) White clover (Fixation) Red Clover. (Fixation) Yellow Clover. (Fixation, deeper roots) Sweet Thai Basil. (Terpenes) Italian Basil. (Terpenes) Chamomile.(Oil production) Borage.(Pest attraction taste) Lavender.(Pest attraction smell) Marigold(Pest attraction visual) Mycorrhizae are beneficial associations between mycorrhizal fungi and a plant’s root system. Mycorrhizal fungi spores germinate in the soil, creating filaments (hyphae) that penetrate the root cells, thus establishing a symbiotic relationship. This collaboration leads to the development of both intra-radical and extra-radical networks of filaments, enabling efficient exploration of the soil for enhanced access to nutrients and water. Consequently, these vital resources are transferred to the plant, resulting in numerous benefits for crop cultivation. Various mycorrhizal products are available in diverse formulations (powder, granular, and liquid), concentrations, and qualities. Ongoing advancements in products, technologies, and research are reshaping our understanding of mycorrhizae. Despite these positive developments, certain misconceptions persist. In the following discussion, we aim to clarify the truths and dispel the myths surrounding mycorrhizae products. MYTH #1 A HIGHER NUMBER OF MYCORRHIZAE SPECIES MEANS BETTER RESULTS. Contrary to common belief, having a higher number of mycorrhizae species in a product does not translate to better results; in fact, it often yields the opposite outcome. A plant can sustain only one association with a particular mycorrhizal fungi species. Introducing multiple species creates competition among them, which is not advantageous for the plant. The initial colonizer does not ensure the highest success; instead, it gains precedence. It is recommended to select a product with a concentrated presence of a single mycorrhizae species known for its effective performance, rather than opting for a product with multiple species at lower concentrations. MYTH #2 ECTOMYCORRHIZAE ARE EFFECTIVE FOR CANNABIS PLANTS. Although ectomycorrhizae can colonize five to ten percent of plant species, cannabis is not among them. Ectomycorrhizae do not penetrate the root cells; instead, they develop around the roots and on the exterior. For cannabis plants, it is essential to seek out endomycorrhizae. Endomycorrhizae are capable of colonizing 70% to 90% of plant species, including cannabis. Unlike ectomycorrhizae, endomycorrhizae penetrate the root cells, forming structures like arbuscules for the exchange of nutrients and water with the plant. MYTH #3 WHOLE INOCULANT (PROPAGULES) PERFORM BETTER THAN ONLY VIABLE SPORES. The propagule count specified on most mycorrhizae products indicates the presence of spores (viable and unviable), hyphae, and root fragments. However, it is crucial to note that only viable spores, those with the capacity to germinate, can successfully colonize a plant’s root system. Spores are to mycorrhizal fungi what seeds are to cannabis plants—a fundamental component enabling fungi reproduction. Consequently, even if a mycorrhizal product boasts millions of propagules, its effectiveness hinges on the presence of viable spores. Without viable spores, the product will not contribute to plant development. Therefore, the genuine value of a mycorrhizal inoculant lies in the quantity of viable spores it contains, as only viable spores can efficiently initiate symbiosis. MYTH #4 ALL METHODS OF APPLICATION YIELD IDENTICAL RESULTS. To establish the symbiosis, mycorrhizal fungi spores must be close to the plant roots. The optimal recommendation is to directly apply mycorrhizal inoculant to the roots, either in powder, granular or slurry form. This method ensures maximum proximity between the spores and the roots, facilitating a rapid establishment of symbiosis. Particularly with crops like cannabis, which have a short growing cycle, employing this technique is the most effective way to obtain optimal benefits. Alternatively, techniques such as blending the inoculant with the soil are effective, but there may be a delay in the establishment of symbiosis. This is because the roots need to grow and come into contact with the dispersed spores throughout the growing media. MYTH #5 MYCORRHIZAE CAN ONLY BE GROWN ON LIVING PLANTS. While the predominant method for commercially producing mycorrhizae involves growing them on the root systems of living plants (in vivo production), it is not the exclusive nor the optimal technique. In fact, this production approach has notable drawbacks that the “root organ culture” method just does not have (in vitro production). In vitro production occurs in meticulously controlled, aseptic laboratory conditions, allowing for the consistent generation of products that are viable, highly concentrated, species-specific, and free from pathogens. Achieving such precision and quality is impossible when relying on the cultivation of mycorrhizal fungi on plants exposed to external conditions. In conclusion, it is crucial to take all these factors into consideration when choosing the appropriate product for your crop to fully harness the wide array of benefits provided by a high-quality mycorrhizal product. STRONGER PLANT – Stress resistance. FASTER GROWTH – Improve plant structure and shorter veg time. INCREASE YIELD – Overall more biomass. IMPROVED QUALITY – Increase cannabinoids and terpenes content.

So apparently my camera does not seem to know what shade green it wants to use. Red Pop #4 is without a doubt the strangest specimen in the group. It is displaying what appears to be polyploid traits in one of its tops. Along with a strange trait displayed by the petioles in attaching to the main stem in a vertical manner causing leave to grow vertically instead of horizontally. It also needs far more nutrients than the rest as it has grown much larger despite bending the main stem 90 degrees at two seperate points. Red pop #2 is a midget and has grown very weak. On a more positive note, I have fixed my humidity issue and now average around 55%. Airflow was the issue. not enough air intake into the tent. Silly me.

Hi. Just defo The older leaves and letting it grow, starting to motive some white hairs...

Bravo Inseedious 👏💪💚

DIVINE SEEDS / DIVINE OG KUSH WEEK #4 OVERALL WEEK #3 VEG This week all is going good she's growing good, stem getting thicker, leaves have a nice green color to them there's no issues this week. Stay Growing!! Thank you for asking by and taking a look it's much appreciated!! Thank you DIVINE SEEDS!! DIVINE SEEDS / DIVINE OG KUSH

Original Sensible Seeds - Frosted Guava 🍈 Enjoy - Week 3 🌻 - 25-26 grad Celsius - 50-55% humidity level - 20l Air-Pot (75% BioBizz All-Mix, 25 % BioBizz Worm Humus) - RO-water (PH 6,3) Day 17 🌸 - Defoliation Sanlight Evo 3-60 100%: about 1000-1300 PPFD Spider Farmer Glow30 12h/12h on

shogun had a good veg and rocky flower due to timer issues with the light heat and missing a feed all that being said she finished well she took the timer issue the best of the bunch but guys dont miss a feed with this one she dosnt take it well doubled with the heat but my issues aside she grows well and can be topped fimd and trained well dosnt stretch too much and yields well cant really recommend her enough already looking forward to the clone of her as she will be finished better thanks for reading happy growing guys

ya un poco mas grande, me empiezo a dar cuenta de que el moho volvio. entonces empece a cuestionarme si regaba mal. Efectivamente estaba regando demaciado para la planta

the plant has developed a lot this week but I notice a slight yellowing which I think is due to the fact that it has not yet received nourishment but that tonight it will receive and we will see what happens and if it settles in place, I will see what to do

Everything looking nominal. One girl is looking a little weak but that may have been my doing. All others look more or less the same. Nutrient schedule the same. Did a res clean and replace. Using reverse osmosis water. PPM’s hovering around 280-300. Water temp 20ish °c

So I thought the plants was going to be a flop but they turned it around, really long time tho for a auto flower, I could of ran photos with a better yield, but never the less these look like 10/10 nugs and smell amazing i can't wait to see how these look dried off.