Likes
Comments
Share
@uktuk
Follow
Plants are quite taller than I would have liked. I've been busy and haven't been able to train them as I usually would. Gave them a defoliation and tried supercropping a few of the really tall branches Sat 24: Defoliated more and supercropped a few more branches. Moved the net up and tried to tame down the height. hopefully it stops stretching soon i don't have much more vertical space. Other than that issue the plants are doing great. It looks like no issues with deficiencies or anything, The autopot is doing great.
Likes
1
Share
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
45
Share
Really impressed with the purple peanut butter breath pheno she gets darker everyday, still mostly clear trichomes. Pbb smells like lucky charms marshmallows rain of frost has some sour tropical funk and diesel and the afghani has a classic hash smell spicy
Likes
17
Share
Welcome back growfessors to another episode of growfessor theatre! Week 6F begins for the ladies of the 4x8, they continue to bulk up, frost-up, sticky and they got that good stank! The ladies are hungry! Going from 4 liters of nutes + water per plant, to 6 liters per plant per week (extra feed started on week 5). They get 4 liters at the beginning of the week and then 2 more liters on day 5 of the week. Well that's all for this week, I hope you enjoyed the show growfessors 👽🌳💚
Likes
71
Share
@TOTEM
Follow
Day 29: She’s growing fast now. I’m trying to keep her short with continuous LST. I think I saw the first pre-flower on day 28. Day 30: There were too many leaves, so I did a huge defoliation to free up lower branches. Day 31: She reacted in the best way possible to the defoliation. Look at the amazing growth from 4:30AM to 11AM. 😜 Later that day I did a SUPER CROPPING (hyper would be better) on EVERY branch I could see. I know, that’s a crazy, fool, move, but if I don’t do stuff like this I’m not happy. Many hearts for you, lovely Stress Killer. I know you hate me now, but it’s for your best interests! Day 32: Recovering from super cropping. Day 33: Almost totally recovered, creating new branches, strengthening existing ones and showing new pre-flowers. Veery nice!
Likes
16
Share
@CheeRz
Follow
Day 51 of flowerin' and the ladies almost fin' 💚. Trichomes lookin' damn frosty ❄️❄️❄️ and buds gettin' really big.
Processing
Likes
19
Share
Vamos familia, empieza lo bueno, y es que estás gorillas si han estirado, la primera semana de floración, aportamos algo de big bud para ir amoldándolas. Es una cepa que se comporta bastante bien en indoor, tallo grueso y bastante distancia entre internudos, deseando ver que flores nos da. ph controlado en 6,5 ahora va todo fenómeno, temperaturas ideales, humedad correcta 50 % , y pronto la bajaremos a 40 %. Hasta ahora lo que hay, próximamente nos vemos familia.
Processing
Likes
7
Share
@Kushizlez
Follow
Day 31 - 38 (Day 32) I’m going to lower the humidity in the room to 55-60. Still no bananas but I’m still quite worried about #3 fully popping and ruining my whole crop. Since there is a good chance it’s going to herm, I’m going to give it with a small feeding today and watch it like a hawk this week. I think the boost actually made a decent difference in #5 from last week. I’m seeing slightly fatter main colas but that could just be from less topping/smaller plant or less nitrogen. I’ve decided to push my luck and give a boost to each plant. These things just aren’t filling out like they should. They look like they are on day 23 not 33. I’m going to top dress 3 tablespoons of 1-4-2 Destiny launch and later tonight I’m going to water in a low strength feeding of 0-0-15 kelp extract. I’m going to give a final heaping tablespoon of nature’s pride bloom to #5 so it can stretch to the end. I’m also going to lower the lights by a few inches. The tallest cola is now about 13 inches away and the rest of the canopy is at about 18–24. If I see signs of light stress I’ll raise it back up but I’m sure it could use the extra light on the lowers. (Day 33) I’ve been reading that bigger plants just take longer to mature and that’s probably why my plant hasn’t fully filled out or is about a week behind. I still could have done a better job defoliating some of the smaller larf branches on the bottom which just robs the good branches of energy. The more I think about it, the more I think I did a very poor job of defoliating the middle canopy. I’m still seeing lots of larf and small buds on the inside not getting much light. I’m still really worried about herms after finding that branch so I don’t want to stress them anymore. Removing suckers now is pointless. I missed my window of opportunity and now I have to deal with it. I’m going to slide an old DVD player underneath #6 to bring it up to canopy level. It’s lower buds are definitely not getting enough light. (Day 34) Ever since lowering the light, the canopy has gotten a few degrees warmer. I’ve noticed the buds don’t feel as sticky on top compared to the lower tucked branches that feel almost wet with resin. Outdoor weed grown in my climate will never reach the temperature where it degrades resin luckily. (Day 36) The buds are definitely swelling but not to the degree I want. Call me picky but I prefer my nugs as chunky as possible. I’m seeing lots of pistils but not much nug matter. Ive heard too many pistils can be caused by the overuse of alfalfa, kelp and seaweed extracts because of the natural PGR’s in them. I’m definitely going to reduce the amount of that stuff I use next round. I hope I’m just wrong and this tent is going to really fatten up this week but I have my doubts. (Day 37) A purple fade is starting on the underside of every plant except the bush who still is super dark green still. Last watering I got a nice amount of runoff so I’m just going to leave her until the end. I’m seeing a bit of yellowing on #5. I’m going to give it one final full strength feeding plus some rock dust and oyster shell tomorrow and that’s a wrap for nutrients. I might as well hit everything else with a final low strength 0-0-15 too. (Day 38) I’m amazed at how much this stuff smells compared to my last round. It smells very earthy and floral with a hint of pine. Definitely not that gassy smelling pine but more of a sweet pine.
Likes
11
Share
@Synkery
Follow
Ha sido un cultivo de aprendizaje! He aprendido a entender lo que te pide cada tipo de planta. Las dos cepas han salido muy potentes i sabrosas!
Likes
61
Share
May, 15th 2021 I need to start Feeding them, because they are alittle yellowish But i think iam Transplanting them anyways... Smooth running Waterings daily, and Spraying with " Fast Plants Spray" Lights are still dimmed back to 50 Percet, Plants developas they should having nice internodial Spacing, and develop nicely Shopping Link for the LIghts: Amazon US: XS1000 10% off: it10mlarimar http://yx-8.cn/0y-6 XS1500 5% off: it15mlarimar http://yx-8.cn/0yA XS2000 5% off: it20mlarimar http://yx-8.cn/0y2Y XS4000 5% off: it40mlarimar http://yx-8.cn/0y5k Amazon Canada XS1000 10% off: it10mlarimar https://amzn.to/38udUVe XS1500 5% off: it15mlarimar https://amzn.to/3esVUyr XS2000 5% off: it20mlarimar https://amzn.to/3l5zAfg XS4000 5% off: it40mlarimar https://amzn.to/3l7k5Uj
Likes
2
Share
Last week of nutes before 2 week flush. buds have bulked out Nicely had to turn the fan speeds up so the humidity didn’t rise to high overnight. No signs of mold. Whiping tents with antiseptic whipes once and week and vacuuming round tent every few days.
Likes
15
Share
The plants colors looked great and the trenchomes were at about 20-30% amber and the 70-80% milky. The smell is amazing and I can not wait to see how the end product ends up.
Likes
63
Share
@AsNoriu
Follow
Day 85. Just before lights photo's for better true colour understanding, Bio Grow and AlgaMic is out, after finishing this cycle CalMag and Silica out too. Hope its not too early, but girls are really healthy, time to pump up the flowers not leaves :) Day 86. Girls just flying, very happy with Gorillas and Control Garden looks really funky, they stand under no direct light on them... and still flowers looks amazing. Got my new mobile, had to try out :) Next week very busy at work, no updates I think. Day 89. So again i made mistake, while watering them last time accidently left heater on, they overdried , plus temps where at +33c ... Bunny Gorilla looks bad, Gorilla Max got biggest pistil damage, half went brown. Thinking i took nitrogen too early out, but we shall see. On other hand all Control Garden took it well even Cookies with theirs waxy leaves stood thurst nice as such stress can be ... Planing to do defoliation next week, but if Gorillas started to eat themselves already will leave them as it is. Future will show .. Happy Growing !!!
Likes
13
Share
Sorry for not updating the diary in a while, I have been very busy with work, and also I had some issues with the grow so there wasn’t much to show honestly. First, my plant was having nitrogen deficiency I believe and then I burned her a bit by giving her too many nutrients at once (I know what a beginner mistake huh🙈) But after all this, I cut her yellow leaves off and she has been really well for the past week. In these past few weeks, I have learned so much about growing after making so many mistakes so that has only been a good thing. Even after all these troubles, looks like she will produce some really nice buds, some of the buds are already pretty big and are just growing and growing every day. Please let me know what you think how far away we are from harvesting?
Likes
184
Share
Germination date 🌱 12/07/2021 Day 120 12/11/2021 Strain 🍁 SinCity seeds YUZU SORBET (Purple yuzu x whitenightmare) THC% • Unknown 💡 Mars Hydro FC4800 • Power draw 480W + 5% • Max coverage 5 x 5 • LED 2070pcsSamsungLM30B1&Osram660nm • Max Yield 2.5g / watt • Noise level 0 DB • Removable Driver +2m cable • Daisy chain (multiple lights) https://marshydroled.co.uk/products/mars-hydro-fc-4800-led-grow-light-samsunglm301b-commercial-greenhouse-medical-indoor-kit 🇬🇧 https://www.mars-hydro.com/buy-fc-4800-480w-4x4-energy-saving-full-spectrum-commercial-led-grow-light-mars-hydro-for-sale 🇺🇸 PROMO CODE • (ORG420) DISCOUNT 👍🏻 marshydroled.com ⛺ Mars Hydro 120 x 120 x 200cm 📤📥 AC infinity 6inch 💧 10lt dehumidifier ❄️ 3.1kw air con system 💉 Nutrients GreenBuzzLiquids Organic Grow Liquid • 1-4ml until 2wk flower Organic Bloom Liquid • 2-4ml flower stage Organic More PK • 2-4ml +wk3 of flower Organic Calmag • 1-2ml/lt whole grow Fast Plants Spray • first 3days at night lights off More Roots • 2-5ml veg +2wks flower Fast Buds • 5ml +wk2 of veg until 1wk flower Humic Acid Plus • 2-5ml whole grow Growzyme • 2-5ml whole grow Big Fruits • 2-5ml flower stage Clean Fruits • 5ml flush 1wk Ph powder Root Gel Living Organics PROMO CODE • organicnature420 15% off ✌️🏼 https://greenbuzzliquids.com/ 🥥 Growing Media • Coco Coir Notes 📝 This one skinks. Alot like tangie so will have that taste. Unfortunately lost abit to mold but not enough to cry about. Great exclusive Strain from sincity, will certainly pop the other 2 in the future. Hanging up with the other girls. 15c 60% perfect ✌️🏼💚 Discount codes for GreenBuzzLiquids and Mars in bio 👍🏻 Happy growing fam ❤️🌱🍁👍🏻
Processing
Likes
8
Share
30-7 Well i'm a hoping she produces like her cousin did. I know Patience!! It's been so humid in the house the dehumidifier has been producing constant RO water at 22PPM. So far no leaks in the new system🙏 This is an interesting CBD we will see if a new location in the room makes a difference this go around.😎
Likes
33
Share
@DevelGrow
Follow
Hallo Freunde 👋 die Test A Version ist mit 42 Tagen in Blüte und Macht sich sehr Gut! Sehr robuste und starke Pflanzen,es wird auch diese Woche noch entlaubt und nicht gewünschte Triebe entfernt! Sonst sehr hübsche Damen ❤️ keep Green and grow High ✌️🍀💚🍀
Likes
45
Share
Heading into week 4 of Flower everything is budin up really nice Zake is the frostiest and really has a mint smell to it Looks like i already can say that breakpad breath will take more than 8 weeks Pink runtz x Hollywood has a Creazy Sweet smell to it
Likes
21
Share
The Fade, the colours, the smells, the resin! What a show! 😍 I hope your enjoying the pics as much as I am, it’s hard to describe the smell now, it’s varnish chemical but with a very strong berry tone. Last week of flush now! Diary update a little late sorry! Will report next week with harvest after 48 hours in the dark. I’ve watered (PH 6.1) her for the last time today so will let her dry out for a couple of days before lights off.