Likes
90
Share
@Herbalize
Follow
Hello folks Welcome for the first week of flowering 😺 ( 38 days veg ) This Pineapple Kush is growing really fast with a lottt of secondary branch ! she responded very well to fimming. Still no nutrients, just rhizotonic and cannazym with 4.5 liters of water every 5/6 days i like CANNA super soil a lot, no need to put fertilizers before bloom, ( good for 6 weeks atleast) and the roots like it 😍 Regarding defoliation, I take off some leaves every day, i dont like removing too many leaves at once I will change the MH for the HPS next week and make a little prayer so that the days are not too hot this summer 😅 I also have 2 another diaries with Rqs/Ripper strains if you want to see Peace Love & Weed GD Fam😍👊
Likes
7
Share
@Naujas
Follow
I'm happy :) I couldn't do it as it should have been, my ph meters broke and ruined everything :( well, but I'm very, very satisfied with the result :) a big thank you to my teacher :)@AsNoriu you are super :) without you it wouldn't have been possible :) I learned a lot of useful information from you :) the house is full of lemon aroma :)
Likes
8
Share
This week transplanted all new soon to be Mother plants to 5 gallon fabric pot, the topped plant responded well and is 8 inches, tied down to 7 to open her up, and the heavy rooted runt of the bunch is 6 inches,
Likes
1
Share
😀I restarted my last grow due to cal-mag issues possibly caused by cree cxb 3590. I restarted with a Dimmable Quantum board.
Likes
5
Share
About 3weeks left.. No problems after Nitrogen and some P deficiencies.. As a new grower best things I have picked up is not be afraid to make mistakes do tons of research and testing nutrients on a separate dummy plant, have fun patience and learn everyday.
Likes
12
Share
An amazing week for these beauties. At the start of week two they began forming really well, and by the end there was stacking and great nug production happening. They are filling out so well. Some of the tops were over achievers and got too lanky to manage, so I tucked as I could to manage them without damaging, but they still took off. I typically tuck and bend for the first week, then go hands off till week 3 with a defoliation, but with the bud production happening so quickly it became difficult and I didn’t want to risk snapping anything off and stressing the plant out. Temps have been consistent, around 80 degrees and 58 % RH. I’ve been checking daily for and pests or problems and haven’t had anything pop up. Also checking for signs of stress or ball/sack hermie production, but all signs say they are happy and healthy. Happy Gardening 🇨🇦👊❤️
Likes
7
Share
First week of life watering with pH 6.0 water. waiting for the cotyledons to begin to indicate that they are running out of nutritional reserves to start fertigation . Which will be with the plantProd MJ line. 100% mineral high frequency fertigation.
Likes
24
Share
🌱 Divine Seeds Germination Report 🌱 Hey, fellow growers! 🌿✨ Welcome to the start of an exciting journey with Divine Seeds! We’ve kicked off our run with some incredible genetics: Moon Rock, Opium, Fractal, and Big Demon. Let’s dive into the germination process and introduce you to the amazing world of the CannaKan method! 🌟 The CannaKan Method: A Game-Changer! 🌟 The CannaKan method is revolutionizing the way we germinate seeds, ensuring higher success rates and stronger seedlings. Here’s why we love it: 1. Optimal Hydration: The CannaKan method ensures the seeds receive just the right amount of moisture, promoting rapid and healthy germination. 2. Temperature Control: By maintaining a stable environment, we provide the perfect conditions for our seeds to sprout. 3. Aeration: The method enhances air circulation, preventing issues like mold and damping-off. 4. Root Development: It encourages robust root growth, setting the foundation for vigorous plants. 🌱 Seed Germination Progress 🌱 Let’s check out how our Divine Seeds are doing with this stellar method: 1. Moon Rock 🚀 • Germination Rate: 100% • Details: These seeds sprouted quickly, showing off their vibrant energy. The seedlings are already reaching for the stars! 2. Opium 🌸 • Germination Rate: 95% • Details: Opium seeds are flourishing with elegance. Their delicate sprouts are a sight to behold, promising a beautiful journey ahead. 3. Fractal 🌀 • Germination Rate: 85% • Details: Our shy Fractal seeds took a bit longer, but they’re coming through with unique patterns. They remind us that every growth journey is special. 4. Big Demon 💪 • Germination Rate: 100% • Details: True to its name, Big Demon seeds are growing strong and bold. These seedlings are the powerhouse of our garden! 🌟 Key Observations 🌟 • Uniformity: The seedlings are consistent in their development, thanks to the precise conditions of the CannaKan method. • Health: No signs of disease or malformation. The CannaKan method’s optimal environment is working wonders. • Vigor: The seedlings exhibit vigorous growth, indicating a healthy start. 🌱 Next Steps 🌱 As our seedlings continue to grow, we’ll: • Monitor their progress closely. • Transition them to their next growing medium. • Provide the best nutrients and care to support their journey. Stay tuned for more updates as we nurture these incredible plants. We’re thrilled to see how they’ll flourish and share every step of the way with you. Happy growing, and may your gardens be ever green! 🌿💚 #DivineSeeds #GerminationReport #CannaKanMethod #MoonRock #Opium #Fractal #BigDemon #GrowDiaries #PlantMagic #GreenThumb Germination method 🌱 @thecannakan Genetics @divine.seeds Nutrition @aptusholland 🌿 @aptus_world 🌎 @aptus_es 🌍 @aptusbrasil 🌱 @aptus_thailand 🌿 @aptus_portugal 🌳 @aptususa_officiala 🍀 @aptusplanttechnz 🌺 @aptusplanttechaus 🍃 Ambient controls🎮 @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro Soil @promix_growers_eur @promix_cannabis LED - @lumatekeu Watering- @autopot_usa @autopot_global Love and attention- @dogdoctorofficial #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trolmaster #trolmastereurope #trolmastersecrets #Autopots #GreenJoy As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 More info and complete updates from all my adventures can be found ⬆️link in the profile description ⬆️ Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All 💚
Likes
4
Share
My Strawberry Gorilla Automatic from Fast Buds is now in its third week of flowering, and I couldn’t be happier with how she’s progressing. She looks incredibly healthy, with vibrant green leaves and strong branches. The stretch phase is nearly over, and she has developed a solid structure with a well-defined main cola.🌱 One of the most exciting changes this week is the first appearance of trichomes on the main bud. Under the light, they’re starting to sparkle, hinting at the resin production that’s about to take off. The buds are forming nicely, and I can already smell a faint but promising aroma developing. So far, she’s responding well to the nutrients and environment, with no signs of deficiencies or stress. If she keeps going at this pace, she’s going to be a real beast by harvest time.😊
Likes
9
Share
@Rizik86
Follow
Day 43 - Checked PPM 870. Plant is 37 inches tall. Day 44 - Added 10 mL of CalMag Micro Grow and Bloom. Added 5 mL of additives Bud Candy Sensizym Big Bud Nirvana and Rhino Skin. PPM is 1,250. Plant is 41 inches tall. Day 45 - Checked PPM 600. Plant is 42 inches tall. Day 46 - Checked PPM 635. Plant is 45 inches tall. Day 47 - Added 15 mL of CalMag Micro Grow and Bloom. Added 7 mL of the 5 additives. PPM is 1,590. Plant is 47 inches tall. Day 49 - Checked PPM 668. Plant is 50 inches tall.
Likes
4
Share
Likes
12
Share
Ya estamos en proceso de formación de la flor. Se ven algunas más grandes que otras. Pero a grandes rasgos estan muy parejas. Me preocupa un poco la cercanía a la luz, dado que estoy en 15cm y cualquier estirón extra, sería una complicación. Vamos a ir viendo como se dan las cosas, pero al momento, no me puedo quejar. Las plantas se ven bien y saludables. Día 24. Se empieza a notar el engorde. Esperando a que aparezcan las hojas de azúcar, que ya se empiezan a visibilizar las primeras. Voy a ver si puedo conseguir overdrive de advanced para cuando se terminen de formar las flores. Entre tanto solamente tuve un inconveniente de pérdida de agua por una manguera que moví al atar las plantas, pero ya repuse la solución perdida y todo va encaminado. No sé si van a tardar las 6 semanas que dice el catálogo, pero cuanto mucho serán 8. Seguiré actualizando. Día 26. Las flores empiezan a yomar su forma voluminosa. Estoy en duda sobre si agregar PK la semana próxima o la otra. Quizá empiece a usarlo en el próximo depósito. No quiero tampoco sobrepasarlas y agregar el producto antes porque tengo entendido que puede ser contraproducente. De todos modos me quedan dos días para el cambio de solución, así que voy a ver cuando termine la semana. Entre tanto, ya empiezan las emociones. Día 28. Hice ina poda de hojas bien fuerte. Ya de esa forma dejo expuesto a la luz todo lo que tiene que terminar de engordar y de paso me esquivo posibles problemas de humedad. Al final voy a usar el PK de greenhouse que tengo, pero voy a subir la dosis. Mañana se viene el cambio de solución, para lo que sería la ante última semana en teoría. Vamos a ver como evoluciona, porque los cambios son muy abruptos de una semana a la otra. Y llegado el momento miraré los tricomas, como para ir haciéndome a la idea.
Likes
6
Share
Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ______________ 📅 D36/V32 - 21/05/24 ⚗️ EC: 1.0 pH: 6.0 🌡️ T: 20°C H: 70% 🌊 🍗 💧 💼 LST 🧠 🚀 🎬 1 TL in her new home and one TL of LST job ______________ 📅 D37/V33 - 22/05/24 ⚗️ EC: 1.0 pH: 5.4 🌡️ T: 20°C H: 70% 🌊 🍗 💧 💼 LST 🧠 🚀 🎬 1 TL video and one TL of LST job ______________ 📅 D38/B01 - 23/05/24 ⚗️ EC: 1.0 pH: 5.3 🌡️ T: 20°C H: 70% 🌊 2L 🍗 💧 💼 🧠 As I saw clear signs of blooming, I need to pass to bloom phase so I put B01, in the header. 🚀 Clearly she's starting flowering 🎬 1 TL video and 1 LST video ______________ 📅 D39/B02 - 24/05/24 ⚗️ EC: 1.1 pH: 5.3 🌡️ T: 20°C H: 70% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video and 1 LST video ______________ 📅 D40/B03 - 25/05/24 ⚗️ EC: 0.2 pH: 5.3 🌡️ T: 20°C H: 70% 🌊 15L 🍗 💧 💼 Flush for two days and then flowering nutes 🧠 I think no more LST, she's now full blooming 🚀 🎬 1 TL video ______________ 📅 D41/B04 - 26/05/24 ⚗️ EC: 0.2 pH: 5.3 🌡️ T: 20°C H: 70% 🌊 🍗 💧 💼 Flush for two days and then flowering nutes 🧠 I think no more LST, she's now full blooming 🚀 🎬 1 TL video ______________ 📅 D42/B05- 27/05/24 ⚗️ EC: 1.1 pH: 6 🌡️ T: 20°C H: 60% 🌊 15L 🍗 Calmag - Bloom A-B - Bud Candy - B52 - Big Bud - Seaweed 💧 💼 👉👉👉 Changed res and added nutes 🧠 I think no more LST, she's now full blooming 🚀 🎬 1 TL video
Likes
3
Share
The DIY Screen is filling up very nicely by letting it Veg an extra week to try maximise & even the canopy out. Pruning every other day as the growth changes daily. I will be flipping it into flowering within the next few days. I cannot wait! The mother plant where this original clone came from is in its last few weeks of flowering & from what i can see, this is going to be an awesome, fun grow.
Likes
19
Share
@Coopmc
Follow
Week 2 for Black Maple x Strawberry Guava thing is a beast!! Just WOW!!!
Likes
9
Share
@Rckeh
Follow
Day 100 - Harvest time! Will hang her completely upside down. RH=58% and 23ºC at almost midday. Hanging them in my bathroom Day 105 - Drying finished today! Was faster then i expected but im mid summer so its hard to maintain proper drying temperatures Im SUPER happy with this diary, @Fast_Buds and the Grow Diaries Team! This website has helped my improve my growing skills in a way i couldn´t imagine. Having a clear, imaged, reported diary where you write everything you do, really helps you understand your mistakes and see where you could have donw better comparing to how others did! Also another big thank you to the GD Team for having me tied 3rd at the FastBuds 2023 Outdoor Grow Contest and to the very kind @Fast_Buds Team 🙌 Keep on Growing!!
Likes
46
Share
@Dreadnug
Follow
Plant has been getting straight pH balanced water this last week and minimal nutes. It is showing some slight nute burn so I let off a bit and raised the light canopy about 6”. I discovered that what I thought was a calcium or potassium deficiency was actually a rookie grower error by me. I have an RO system that I use to water all my strains in the grow room including this one, but when adding nutes to the water, it takes too long so I had been filling them up with well water. When I had originally tested the well water, I must had used a faulty testing agent as after testing it this last week, I was showing a pH of 7.5 vs. my RO of 6.2. Thus, every time I was adding nutes (multiple times a week) I was significantly fluctuating the pH between regular feedings and nutrient additions. To make matters worse, when I originally thought it was nute burn, I flushed each plant with well water and likely caused additional stress. Anyway, I have since learned that the well water needs to be treated, I only utilize RO water the last few days and plan to do so over this next week. Also, I have turned off the CO2 system as I was starting to see signs of heat stress on a couple of the strains (Plant #1). The literature I have reviewed suggested that these strains might be able to handle heat closer to 90F but it was also causing issues with high humidity so when I added a dehumidifier, it pushed the day temp to between 90-92F and the overnight temps were not getting low enough (maybe 85F or so). Maybe I could leave out the dehumidifier, but I was getting rH of 70% and didn’t want to risk any bud rot or mildew growth. So for now, I have turned off the CO2 and am getting high temps of 81F with 60% humidity and overnight temps of 74F and 50% humidity. Plant #1 had some heat related curling of leaves as well as some of the lower leaves showing impact of the pH fluctuations. My hope is we will be steady until harvest. Plant #2 has shown the least signs of stress and is fattening up its buds very nicely. Late in the week, some of the leaves started turning brown from the pH issue but my hope is that with RO water only, we will be on the right track. Over the next few weeks I will start monitoring the trichomes for a nice milky color for harvesting.
Likes
7
Share
This week, I started defoliation and tying down. So far, no signs of pistils. The smell is beginning to emit. PPM remains at 1000, and the pH is 5.8. While waiting for the harvest, I'm enjoying the last Rosin I made.