Coming down to the last few weeks to final harvests. Bruce banner and slurricane mothers remain as do 2 x slurry daughters, 4 x bb daughters, and 2 x FFT testers. The season has been good to me, the Scroggernaut has been good to me. Once these buds are in jars, the room will be cleaned, and I will break for the winter. Improvements next year: mini split AC new strains under belly lighting

Harvest 2 weekend ago and dried at ~60° at 60 RH. Took about 12 days total.

Will increase the nutes slightly during the week and back off the Root Juice. Loving the Biobizz and loving the soil instead of Coco for a change. They are very healthy and loving life.

Welcome to the Sweet Seeds Cup 🏆 Hey everyone :-). This week she started to put her full power into the flower production :-). Since then she has received Canna Bio Flores and Canna Bio Boost 🤗. It is barely one meter high and looks beautiful 😍. In addition, it starts to smell very delicious 👍. I water it about every 3 days with about 1 l - 1.5 l. It is very stable genetically and I'm glad I took cuttings 😅 . I am very curious to see how it will develop next week. I wish you all a good start into the new week, stay healthy 🙏🏻 and let it grow 🌱 Sweet Seeds Cup 🏆 Type: San Fernando Lemon Kush ☝️🏼 Genetics: OG Kush x Kosher Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Earth: Canna Bio ☝️🏼 Fertilizer: Canna Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 - 6.3 💦💧

Poslední týden před sklizní. Ve čtvrtek naposledy zalito. V sobotu nechám naposledy rozsvícená světla a v úterý bude sklizeň.

If you come across something Im doing wrong or some faults or got any tips or useful tricks. Feel free to let me know. I can use all the info and pointers. Fyi this is my first op if you cant tell by the plant conditions lmfao

1/12 start of week 2 she’s getting bigger every time I open the tent 😂 didn’t need to water today we’ll check again later. 2/12 didn’t do much just a light water 3/12 Doomday 😂 my temperature and humidity monitor came and I realised my poor plant was in the desert and thanks to the community I also realised I’m growing in a massive fire hazard I purchased a new light and temperature has dropped thank god and thanks to everyone who answered my question. We’ll see how we get on with this CFL light 3/12 I also fed her this morning 1l of water with 2.5ml of Canna vega 4/12 nothing to be done 5/12 same as day before I think she’s looking good tho

Monster 😈😈🌋

Germination was very simple, paper towel for 40 hours. I always use a few sprinkles of Mycorrhizal Inoculant to boost the first stage of the growth when they are moved to the cups.Every 6 hours i check for water and humidity.

Eternity Grow Cup - Week 1 Flower Report Welcome to the first week of flower in the Eternity Grow Cup! This is a crucial stage in the cycle, and we’ve made some important moves to set the girls up for success. Let’s dive into all the details and talk about the key elements shaping this transition. 48 Hours Dark Period & Transition to Flower Before flipping to flower, we implemented a 48-hour dark period. In my experience, this technique helps the plants transition more smoothly and accelerates their hormonal shift into flowering. It’s a method that has consistently worked well for me, and I encourage growers to explore different approaches to find what best suits their setup. The Power of Reds - Far Red & Deep Red As part of this transition, we have introduced far red and deep red lighting. These are turned on 15 minutes before the main whites and stay on for 15 minutes after. The reason? This simulates the natural sunrise and sunset effect, which helps optimize the flowering response and enhances overall plant development. The red spectrum plays a crucial role in promoting stretch and enhancing bud formation early on. Light Schedule - 11/13 Cycle From the start of flower, we are running an 11 hours light / 13 hours dark schedule. Over the years, I’ve found this lighting strategy beneficial in inducing faster flower onset, increasing terpene production, and ultimately producing better-quality fruits. This is something I personally swear by, but as always, I encourage others to experiment and see what works best for their unique environments. Spending Time with the Girls One of my favorite parts of the grow is spending time with the plants, enjoying some good medicine, and simply being present in the garden. The connection we have with our plants is invaluable, and I believe they truly respond to the energy we bring. It’s a labor of love, and every moment spent with them contributes to their health and vitality. Monitoring with TrolMaster TM + App All data is being closely monitored using the TrolMaster TM + app, and I highly encourage everyone to check it out. Seeing all the details, tracking trends, and adjusting conditions accordingly is a game-changer. If you love data as much as I do, this is definitely something worth exploring. Gear Spotlight - AeroFan Extraction Let’s talk about one of the essential pieces of gear in this setup: the AeroFan Extraction System. This exhaust fan is an absolute beast, keeping the environment perfectly dialed in while looking sleek mounted on the wall. A good extraction system is key to maintaining ideal airflow, temperature, and humidity control, and this one has been doing an incredible job. Current Environmental & Nutrient Data Water pH: 6.0 Water EC: 1.36 Water Temperature: 16°C (a bit low, will be adjusting soon) Soil EC: 1.44 Soil Temperature: 20°C (decent but could be slightly higher) Maintaining the right balance of temperature, pH, and EC is essential for a successful flowering phase, so I’ll be keeping a close eye on these numbers and making any necessary adjustments as we progress. Shoutouts & Community Love A huge thank you to Plagron, Zamnesia, and Grow Diaries for making the Eternity Grow Cup possible! Massive appreciation to the entire community—supporters, competitors, lovers, and even the haters—you all keep this space thriving. Let’s also take a moment to wish everyone the best of luck in the competition. The level of dedication and skill across the board is truly inspiring. Keep pushing, keep growing, and let’s make this an unforgettable run! Join the Journey For those who want the full experience, make sure to check out the YouTube channel! Some of the episodes are too big for Grow Diaries, but they’ll be available in 4K for the best viewing experience. Stay tuned for all the updates, and don’t miss out on the upcoming episodes. Wishing everyone an outstanding week ahead! Let’s keep the energy high, and let’s keep growing strong! 🌱🔥 See you all in the next update! Genetics - Runtz https://www.zamnesia.com/6000-zamnesia-seeds-runtz-feminized.html Nutrients - Plagron https://plagron.com/en/hobby - Aptus Holland https://aptus-holland.com/ Controls - Trol Master https://www.trolmaster.eu/ LED - https://www.futureofgrow.com/en LED - https://www.thinkgrowled.com Soil - https://www.promixgardening.com/en Germination - Cannakan https://cannakan.com/?srsltid=AfmBOopXr-inLXajXu3QFgKXCXXos4F1oEvScjMKIB5MR5dk8-GJ-F49 DOGDOCTOR 15% off Smoking Papers - https://ziggioriginal.com/ Terpene saver - https://grovebags.com/ As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. The journey with nature is one of discovery, creativity, and respect. Let’s celebrate it responsibly and continue to learn and grow together! Growers Love To you All 💚 #EternityGrowCup #RuntzHunt #GrowersLove #CannabisCommunity #AptusHolland #ProMixSoil #TrolMaster #Zamnesia #Plagron #ZiggiPapers #Grovebags

think ive killed all gnats growth has started to show again

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.

Could have let her ripe a little longer and let lower buds fatten up more, but I've decided it's time now. Harvested on 09.Nov.2023-Day 70 This little plant produced a lot of nice Business just 70 days. I am very happy with Gorilla Cookies and will definetly grow it again. Thé plant loves LST and its highly recommended to increse thé yield. It felt like flower starts in week 3 but the plant continues to grow until like week 9 or 10..so high yield in short time is not just possible but likely.

Por una parte tenemos la que llamaremos Biscotii 1: Tiene un tamaño monstruoso, que tuve que doblar en varias ocasiones el tallo porque no me daba más el foco para subirlo. De hecho una de las ocasiones me quemo una hoja del puntal y un pelín la puntita y como se puede ver hizo que la punta parezca un monstruo!! enorme, grande y de forma especial. Hay gente en instagram que me pregunta que si lleva anabolizantes jajaajja lo más parecido a eso es los nutrientes de plagron!!! Que las revienta a las pequeñas Esta tiene unos tonos morados que la hacen muy atractiva y una resina generosa. El olor es fuerte y la altura estirada es una pasada!! Por otra parte la Biscotti 2: El tamaño es inferior que la anterior, pero no por eso diría que poco productiva... Tiene un central que da miedo igualmente, los satélites son una pasada llena de resina. En esta ocasión no tiene tonos morados, pero tiene mayor resina. En general ambas dos tapan la botella de litro y medio de agua, prieta, olorosa y con resina para aburrir!! 😍😍😍😍😍 El peso le pondré en seco en cuanto lo pese 😇

Stardog room it is looking pretty good and is thriving. Hopefully get the results we asking for. Aya room up to now is giving pretty impressive results and it looks like they like the enviroment even tho its not fully equiped. After adding the c4 neet to celan the insides a little bit more and see how it will react.

Two weeks have passed since the flip. Plants haven’t started flowering yet, but they’ve already shown their sex. The height distribution turned out quite interesting, almost like it was planned. Weekly growth: #4 – 55 cm – getting pretty close to the light already #3 – 24 cm – perfect size for my box, exactly what I wanted #6 – 7 cm – solid progress compared to last week Overall everything is stable. I’m doing light defoliation, removing 2–3 leaves per day where they block light from growth tips. I’m not going for heavy defoliation — after reading and watching a lot, I’d rather keep the leaves. There’s also an opinion that around week 3 you shouldn’t remove too much anyway, and in general aggressive leaf stripping isn’t a great idea, partly because of mold risks. Why mold? Because external humidity isn’t as important as internal humidity inside the buds. The plant constantly releases moisture through transpiration all the way until harvest. If you remove most of the leaves, where does that moisture go? Exactly — into what’s left: buds and small inner leaves. That can create near 100% humidity inside dense flowers. You can drop RH in the room all you want, but inside the buds conditions for mold can still be ideal. Add a strong day/night temperature swing reaching the dew point, and it becomes a perfect environment for mold. So I’ll keep most of the leaves, just thinning enough to improve light penetration both from the top and bottom, without going overboard. Gradual defoliation also causes less stress compared to doing a heavy lollipop in one go. This isn’t a commercial farm with 1000 plants — we can afford to be precise and take off a few leaves every couple of days. Nothing more to report for now. Plants are still stretching — expecting the first “buttons” any day now.