We continue the flush! I’ll give them 2ml/l canna flush on next watering Purple tones appeared on dos si dos 33 ! Trichomes started to turn amber and buds are more denses ! Harvest day is for soon !!

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Hey everyone ☺️. She developed very well 👍. In the next 10-14 days she will be in the bloom tent :-). 1 g Enhancer Pro l cocos was added. As always, a cuttings are cut before moving 👍. Otherwise everything was cleaned and checked. Have fun and stay healthy 🙏🏻 You can buy this Strain at : https://www.exoticseed.eu/ Type: Herz Og ☝️🏼 Genetics: Larry OG X Kosher Kush Indica 60 % / Sativa 40 % 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

The girls continue to fatten. Way down on the base nutes, hard nitrogen toxicity is showing. 1. Nitrogen toxicity. It was commented on my last grow question that the leaves on my Gorilla Glue grow looked like they were heavy in nitrogen. I did the research and it looks like they were correct. Dry crispy leaves, heavy dark green. They and now myself blame the full strength Advanced Nutrients, noting they are high in Nitrogen. 2. pH issues. I also started noticing a lockout isssues, like red stems. I initially thought it was a strain specific trait, but again was recommended to test my runoff - it came out around 4.5🤮 (on all my plants). Ive been watering heavy at 6.7 now with lime on top (also a new ph meter coming today). Hopefully will help. Regardless, this girl is still pushing energy into the buds and making some nice crystals. The powdery mildew issues is actually going quite well. Not very invasive, no longer leaf stripping either. Im using Safers brand 3 in 1. Placing a wet paper towel behind the leaf, i carefully spray it and wipe it down front and back. 1 week later no reoccurrence on those leaves.

hi all topman! thank you humbolt for his supply of goods. we used it to germinate seeds, so it turned out to be a 2 in 1 package! I think this is great strain ^^

Rainy week, no need to fertilize or to water the plants. The are growing fast and very tall, despite it should be small one, the tallest ones are from seeds I found in my Baby Boom last year that could be a good explanation. I give a bit more of fertilizer and I started with the Boost + for the flowers.

Two of the three have been cut. The first one was just a stubby little lady that had just under an ounce of dried flower. The second one was taken last night and her main cola weight 5 wet and was just covered in oily terpenes. This last one while behind the others is by FAR the frostiest and I can’t wait for her to ripen. Therefore I am not calling it a harvest until the trichomes become perfect as the last one did.

Week 11 - Day 1 : Pinched branches from subject 1 and 2. As seen in the videos uploaded. Week 11 - Day 2 : Changed water schedule to water-water-feed, watering my plants with 4 Liters per plant every 3th day. Pinched branches recovered successfully. Week 11 - Day 3 : Pinched lower branches of subject 1, take a good look and tell me what you think! Week 11 - Day 4 : Pinches branches of subjects 2 and 3, take a good look and tell me what you think! Week 11 - Day 5 : Pinches branches of subject 1, take a good look and tell me what you think, had my first harvest of ladybugs in the garden and released them on my plants, noticed that I have very little spider mites on my plants. Posted week 1 to 9 on my diary. Week 11 - Day 6 : Woke up to subject 5 being damaged, What could have caused this? Too heavy branches? Maybe an animal that accidentally broke the branch and took off. Week 11 - Day 7 : Pinches branches of subject 3, take a good look and tell me what you think!

Day 118 Mon PH 5.8 EC 0.4 DLI 12h PPFD Water 16-24c

Day 22 22/07/24 Monday Nothing new to report. Starting to see them beautiful fans appear that's all 😁✌️ Day 23 23/07/24 Tuesday Feed today, giving them straight all nutes Inc flowering nutes. I will update the dose as they grow and develop a bigger hunger. (Not sure what's wrong with Overdose #2, bit mutated, we'll see how she gets on 😅) Video updates 👌💚 Day 26 26/07/24 Friday De-chlorinated watering pH 6 with 5ml calmag to 5L water. Watered each with 250ml and had small run off. I will continue to feed/water with small run offs to help prevent salt build ups. Video update.

Endlich ist es soweit und die erste Blütewoche stand auf dem Plan. Insgesamt muss ich die vegi nächstes Mal etwas verkürzen. Diese Woche hat sich viel geändert. Angefangen habe ich mit der Einleitung der Blüte unter 24h Dunkelheit. Meine Zeitschaltuhr war noch im Sommer Modus, also lief Nachts. Den Zyklus habe ich auf den Tagesverlauf angepasst um die hohe außen Feuchtigkeit von momentan 85-90% ideal über den Tagesverlauf nutzen zu können. 6Uhr Licht an, 18:15 Uhr Licht aus. 30min auf und Untergang. Natürlich habe ich auch einen Entfeuchter, der dadurch nur selten lief. Die Nährstoffe habe ich Angepasst auf ein 1:1:1 Verhältnis, um langsam Stickstoff raus zunehmen und dafür Kalium reinzubringen. Mit Bud Ignitor habe ich direkt 1 Tag vor Blüteumstellung mit 2 ml pro L begonnen und Bud Faktor X kam auch dazu, Voodoo Juice wieder mit ins Schema und B-52 raus. Außerdem habe ich noch die 2 Ts 1000 gegen 1 FC E 3000 gewechselt, da sie momentan frei war. Gleiche Leistung, gleiche LED, aber bessere Lichtverteilung. Die Temperaturen habe ich auf 27 Grad über Tag und 24 Grad in der Nacht gehoben um das Wachstum zu fördern. Der EC ist quasi gleich geblieben.

🌈💐🍬🌈💐🍬🌈💐🍬🌈💐🍬🌈 Hi and welcome to another grow again from Kannabia we are talking about my second attempt at the strain Runtz Auto it's going to be a single plant diary and I'll be LSTing HSTing topping and pruning like last time. Only difference is that I’ll be trying a different nutrient schedule this time to try and avoid pH fluctuations as much as possible as the last pheno seemed a bit sensitive on pH issues, so I’ll be keeping it more simple but maybe at a higher dose let’s see what she wants. Thank you Kannabia for the chance to try out your awesome seeds 🙏🏻❤️ 🌈💐🍬🌈💐🍬🌈💐🍬🌈💐🍬🌈 💭❗💭❗💭❗💭❗💭❗💭❗💭 ❗Events"&thoughts worth noting❗ 💭❗💭❗💭❗💭❗💭❗💭❗💭 23.10.24(GW)(morning)The little lady popped her head above ground. 23.10.24(VW1)(afternoon)Soaked her with (*1) again, I really hope I won’t burn her, what I’m doing is not advisable but I’m a greedy man I guess, it’s all or nothing 😉 27.10.24(VW1) Add 10ml TriPartMicro to (*1) and use at next feed. 30.10.24(VW2) in the clip I’m just strengthening the main stem for her future training and not just being mean😉 02.11.24(VW2) Add another 10ml of TriPartMicro and get it to 20ml and let’s see how she reacts, use on next feed✅. 05.11.24(VW2) Topp her and prune nodes not needed and start training preparations, add clay pellets up to the first node from the bottom that I’ll keep (if possible of course)📸✅. *part of training preparation👇🏻 05.11.24(VW2) Add another 10ml of TriPartMicro and get it to 30ml and let’s see how she reacts, use on next feed✅. 08.11.24(VW3) noticed the leafs being too green nearing slight N toxicity so I’ll feed with (*1) at 50% strength the next two feeds observe and act accordingly. 09.11.24(VW3)Did first LST session and then fed her(📸) 13.11.24(VW4) She seems to be happy with nutes at 50% strength so I’ll keep it that way for another few days observe and give her a regular 100% strength feed hopefully timed right with the flowering stretch. 16.11.24(VW4) Pruned excess bud sites and defoliated (📸) 20.11.24(VW5) LST until stretch is over and maybe do one last pruning of excess bud sites just as the first bunch of pistils/buds appear. 23.11.24(VW5) Did my last major HST & LST session✅, end of the week I'm switching the diary to flowering as first pistils are visible and I'll keep on doing a light LST until harvest, might do a last pruning session though maybe middle or end of next week. 27.11.25(FW1) Did a defoliation and LST session✅📸. Noticed some leafs with brown spots📸so she seems to need a bit more PK so I dropped TriPartMicro to 20ml from 30ml and increased GreenBuzzBloom to 40ml from 30ml✅. 02.12.24(FW1) Added 20ml TriPartBloom. 02.01.25)FW6) it's my last update before harvesting end of the week or middle of next week, still not sure. 04.01.25(FW6) Drop TriPartMicro to 10ml, increase TriPartBloom to 40ml, drop GreenBuzzBloom to 20ml 04.01.25(FW6) Still not sure when to harvest, trichomes seem "ready" with a couple of amber between the milky one, the buds themselves seem to need a bit longer as I still see white pistils here and there and hopefully they get a bit more fat. 09.01.25(FW7) definitely the last update, harvesting today or tomorrow. 💭❗💭 ❗💭❗💭❗💭❗💭❗💭 🐝🌼🐝🌼🐝🌼🐝🌼🐝🌼🐝🌼 🌼Day to day tasks & actions🌼 🐝🌼🐝🌼🐝🌼🐝🌼🐝🌼🐝🌼 07.01.25(FW6) fed with (*1) 5l 08.01.25(FW7) fed with (*1) 5l 09.01.25(FW7) fed with (*1) 5l 🌼🐝🌼🐝🌼🐝🌼🐝🌼🐝🌼🐝🌼 🍶💦🍶💦🍶💦🍶💦🍶 💦Nutrients in 30l(*1) 💦 🍶💦🍶💦🍶💦🍶💦🍶💦🍶💦🍶 💦TriPartMicro: 10ml*20ml*30ml*20ml *10ml 🍶TriPartBloom: 0ml *20ml *40ml 💦 Fermented🌿juice:0ml 🍶GreenBuzzBloom: 30ml*40ml *20ml 💦Cal-Mag: 60ml 🍶buxXtrade citric acid Ph- 💦🍶💦🍶💦🍶💦🍶💦🍶💦🍶💦 ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️Tools & equipment ✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️➡️2xMarsHydroSP3000 ⚙️➡️MarsHydro150mmVentilatorACF ✂️➡️Trotec (big) dehumidifier ⚙️➡️Small no name dehumidifier ✂️➡️Kebab stainless skewers 3 (LST) ⚙️➡️wire+roast beefskewers(LST) ✂️➡️trimming scissors.(HST) ⚙️➡️Waterproof vacuum cleaner for ✂️spills. ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ 🍭🍦🍬🌈🍭🍦🍬🌈🍭🍦🍬🌈🍭 🍦RUNTZ AUTO KANNABIA 🍬🌈🍭🍦🍬🌈🍭🍦🍬🌈🍭🍦🍬 🌈Seed:Auto Zkittlez&Gelato😋. 🍭Effect: Balanced 🍦THC: 20 %. 🍬Features: For beginners 🌈Flavor: Earthy, Floral, Sweet 🍭Complete cycle: 70 days. 🍦Average height: 100. 🍬Yield: 450-500 gr/m2. 🌈🍭🍦🍬🌈🍭🍦🍬🌈🍭🍦🍬🌈,

I was pleasantly surprised with Green Crack as a whole throughout the grow. She stayed healthy throughout her lifespan while producing decent sized colas in bloom. I would suggest a slightly higher temp in late veg, closer to 80-84. I have her hanging in my dry room at 66 degrees and 62% RH. The smell is starting to envelope the room with a strong fruity almost tropical aroma. I can’t wait to update my diary after she’s dry enough to smoke but even more excited to try her after a solid 30 day cure. I harvested one of the Mimosa Cakes last week. It’s in day 7 of drying with about 3-5 days to go. Stay tuned for the smoke results and final weight!

Girls are doing great

Great run

My pictures seem to have re organized themselves, just give me a few here and I'll get the full rundown . So this week ( day 21-23) was MAJOR defoliating. What my first step is to start taking the largest fan leaves . My next step is about halfway through the canopy I'll stop and then I'll start working on the very bottom of the plant now at this stage in the game anything that doesn't even have a nice Bud site so a nice white hair sticking bud at the very bottom like shoots I'll just cut them right off. This is the first steps of a main line but I don't complete the actual full main line I probably will try it sometime soon just not this time. So you take off anything that is a small shoot coming off the main stems and then your next step is . STOP. It might be a minute it might be 10 minutes, 20 min , it might be an hour or more ( my tip is don't wait a full day I try and do it within the first 12 hours of starting it) but I always stop just to look at what I've done sometimes if you get going too quickly you can end up doing way too much. Stand to talk to canopy and look what sites are getting hit by light what places are these families beneficial to use for photosynthesis. Anything that is not doing as much good will be taken off and at that point I'll probably do another you know 5-10 minutes of defoliation maybe take one or two more shoots at the bottom to ensure what's left there is a huge fat cola that's going to give you those huge buds . After this you're going to want to do your best to support those stems that are going to hold a lot more weight as if the plant would have been with all the shoots so you're going to want to just make sure that you have staking in place or some sort of support system to keep them from flopping over a breaking them in the future because that's one thing yeah it's great but then it'll get to a point where oh no stuff falling over and then it's just more hassle than it is helpful. I got alot more pictures to follow this week so stay tuned !!!

This has been another great week ! We are at day 36 end of week 4 and these ladies are getting nice and bushy! Still using the same dose nutrients just a little less rapid start at 1/2tsp per gal now PH at 6.5 still. The plants have now grown into 600 par an should start flowering this week!! Can’t wait to see what these ladies do this week😍😍 Stay Tuned Cheers an Happy HALLOWEEN 🎃 👻🔪

~ AirCube Active Oxygen Ebb/Flow System sponsored by GrowAce, featuring Strawberry Gorilla Auto by FastBuds ~ Well guy's and gal's here we go again on another exciting Autoflower run together! This time will be different as I will be doing a 'Hydroponic' run utilizing the AirCube Active Oxygen Ebb/Flow System by GrowAce, who were kind enough to sponsor me for this run, so it should be interesting to see what results I get and have some fun along the way! •Let me first tell you about this 6 Pot Ebb/Flow system from GrowAce: "The AirCube system is the one and only Ebb & Flow grow system on the market that combines the benefits of air pruning with a fully automated Ebb+Flow system! With the AirCube's proprietary fabric pot in bucket design, this system is guaranteed to outgrow any other Ebb + Flow system on the market. The results speak for themselves- grow MASSIVE roots that result in MASSIVE fruits! Air Pruning- Air Pruning only happens with fabric pots. As the roots reach the fabric walls of the pot, they penetrate and grow into the breathable fabric. Once penetrated, the roots are exposed to air, which causes the tips of the root to dehydrate and naturally prune themselves. This natural pruning process forces the roots to grow tons of lateral fibrous feeder roots. This results in a plant that utilizes the entire root zone and fills the entire pot with tons of roots. These fibrous feeder roots are incredibly effective in uptaking water and nutrients, resulting in a plant that grows healthier and more vigorously! Oxygen Benefits- Without oxygen, nutrient absorption cannot occur. On a molecular level, oxygen is needed to transmit nutrients across the cell walls and into the roots of a plant. With the AirCube's proprietary bottom lifted draining design, the system actively draws all of the water out of the bucket pulls vital oxygen into the root zone. Maximum Versatility with Any Grow Medium: The AirCube System is the only system on the market that allows you to use any growing medium you like. Use coco coir, soil, peat moss, perlite, vermiculite, hydroton, rockwool or any other medium you wish! This system is the most versatile Ebb and Flow bucket system in today's hydroponics industry. Temperature Control- with the fabric pots constructed with highly porous polypropylene fabric, heat dissipates easily and effectively. Unlike standard plastic pots, heat isn't trapped in the root zone. Heat in standard plastic containers can reach temperatures of up to 125 degrees. When this type of heat is trapped and unable to escape, it can damage your plant's health and limit the potential of your harvest. Growing in the AirCube System, plant roots grow cooler, healthier, and more vigorous. Largest Pots in its Class- this system features 5 Gallon grow buckets, the largest pot size of any other ebb and flow hydroponic system in the market. Modular and Expandable- start with 6 grow buckets and expand up to 36 grow buckets with the optional 105 gallons PopTank reservoir!" For my medium and nutrients I decided to also switch things up from my regular Organic runs, going with Plagron Nutrients and Root Royale 70/30 Coco/Perlite. When filling the fabric pots with medium, I first added just under a gallon of horticulture perlite from Nor-Cal as a base layer to ensure good drainage and then filled the remainder with the Root Royale. •Now for one of my favorites, and award winning strain from my friends at FastBuds... Strawberry Gorilla Auto: I'll be running Strawberry Gorilla Autoflower which is a 55/45 Sativa/Indica Hybrid. "ATTENTION ALL! Due to our continuous efforts in evolving our breeding process, we are proud to confirm that our Strawberry Gorilla Auto has now become one of the most potent autoflowers in the world! Paving the way to our recent success where she ranked on top & brought home the gold at the very first American Autoflower Cup in California. Moreover, she proved that not only modern autoflowers can compete with photoperiods, but they can even beat them in their field. At the most recent edition of the Farmer’s Cup and competing against various photoperiodic strains, Strawberry Gorilla Auto took home the title of 'Highest Combined Terpenes' in the highly sought-after 'Home Grow Hash' category, with an impressive 97.163 mg/g total terpene content! Our exceptional genetic selection's crowning Strawberry Gorilla Auto strain is a spectacular hybrid known for producing yields of up to 600 gr/m2 in 70 days. This is a very manageable grow that can reach heights of up to 150 cm - due to its magnitude we recommend it for more experienced growers, as a huge plant may be a little overwhelming for first-timers. This show stopping sativa heavy hybrid is perfect as an all day smoke, producing a taste bud tingling, pungent berry and diesel terpene-rich flavor combo that leaves you with a grin from ear to ear, a perfect choice for those looking for a day-and-night autoflower! "* *References: GrowAce.com, 2fast4buds.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: • AC Infinity 4x4 tent •AC Infinity Cloudline T6 Exhaust Fan w/ Controller 67 •HLG 650R w/UVA Bar *** For some reason GD does NOT have a listing for the USA version of the 650R so I selected the closest match to it. •AirCube Active Oxygen Ebb/Flow 6 pot System •TrolMaster Hydro-X Controller for light •AutoPilot APC8200 co2 controller fed by a 50# tank •16" Hurricane oscillating fan and 8" floor fan •Tent cooling via filtered outside air delivered by AC Infinity Cloudline T6 fan •BlueLab instruments: PH Pen and Truncheon Nutrient Meter ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 11/15- Here we go into the second full week of flower for the FastBuds Strawberry Gorilla's and they're each at a slightly different stage in flowering. The #2 plant has the most developed flowers of the three, with the other two just really starting to build their flowers beyond just a few scattered pistils. I'm continuing with daily monitoring of the AirCube reservoir, checking/adjusting ph and topping off with straight water. The solution strength in the reservoir is still hitting 650ppm but is starting to get discolored so I'll be doing a drain/refill in the next 48hrs before it gets funky. 11/17- Today I drained the reservoir and refilled it with straight well water that has a .3 EC(100ppm) to which I added Plagron's Cocos 'A' and 'B' in equal amounts, Green Sensation, and Royal Rush at 1ml/L and 2ml/L respectively. I also added the last dose of silica, then ph'd the solution to 5.7 @ 69℉. I also went through all three plants, adjusting their LST and tucking a few leaves that were blocking light. 11/19- The Strawberry Gorilla's are all progressing nicely into flower, and are all looking healthy. They are all starting to really form their flowers now and are all about equal in height. The #2 plant continues to be the one to watch as she's really going strong and has great structure and vigor. 11/21- There's two weeks of flower behind the Strawberry Gorilla's with the #2 by far in the lead. The other two continue to do well and are progressing through flower nicely, and will be catching up to the #2 rapidly. Between the three plants I'm sure they'll be completely covering their side of the 4x4! I'll be doing a drain/clean/refill on the AirCube reservoir tomorrow to give the girls a fresh dose of nutrients. Hope to see you next week. Growers Love💚 💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow what you love, Love what you grow!💚

Girls are looking very nice! Started flushing them.

Blueberry Muffin was also chopped on day 64. It never seemed to take off and was the smallest and weakest in the tent. Honestly it was out of frame in so many pictures just because it was embarrassingly small. The terps never really became the Blueberry Muffin that was promised. At most, there is a sweet cedar hardwood spice smell, kind of like men's cologne, on top of a classic dank weedy taste. There's a hint of something like pastry crust when I smell it in the bag. It does kind of remind me of a classic well rounded smoke from decades ago. One friend even preferred this strain over the others in the grow due to the simple classic flavor... not me though, I rank this 3rd out of the 3 harvests so far. It was tiny and so was the yield, with the official weight coming in at 20g. It was truthfully a little less on the scale but I also tested more than a gram, so I'm calling it an even 20. I'll definitely try this again sometime, I support HSC and think they have quality genetics, I don't want this to sour my perception of them.