Likes
Comments
Share
@Salokin
Follow
Week went again very uneventful. The plant does what she is supposed to be doing (gaining weight) :). Still lots of new pistils appearing overnight, I am checking the Trichomes daily, however, everything remains milky, with only very little % of amber trichomes. Once amber colours start increasing I will start flushing.
Likes
11
Share
Likes
48
Share
@Nvchods3
Follow
se le realizara defoliacion masiva dentro de esta semana , se la estado levantando la malla , mientras solo se usa para armar una estructura ya pronto la dejare fija y lista para floracion
Likes
56
Share
Bonjour à tous les padawans et les maîtres jedis Le LST est fini mon tronc en forme de colonne vertébrale fais un tour sur lui meme (vidéo jour32) cette forme me satisfait pleinement je décide donc de retirer la majorité des fil de fer servant au LST Le pincage d'Apex offre à la plante une canopé homogène (photo jour 32 34) Jour33 arrosage avec 2 litres d'eau ph6 à laquelle j'ajoute 0.5ml de topmax biobizz (dosage très léger pour ne pas provoquer un lock-out) cela favorisera son entrée en floraison. J'effectue une légère defolliation pour permettre une meilleure pénétration lumineuse aux apexs du bas. Quesque la defolliation ? LES CULTIVATEURS AMATEURS, PRENEZ GARDE, MAIS NE PRENEZ PAS PEUR La défoliation consiste à retirer les feuilles des plants de cannabis en intérieur afin d'accroître le rendementfinal. Le cultivateur amateur doit faire preuve de vigilance lorsqu'il commence à appliquer cette technique de taille. Malgré le débat sans fin entre ceux qui prônent cette technique et ceux qui la dénigre, il n'y aucune raison pour qu'un amateur ne s'y essaie pas afin de voir si ça lui convient ou non. COMMENT DÉFOLIER Que vous tailliez les feuilles ou les branches des plants de cannabis, il vaut mieux utiliser un sécateur stérile qui est confortable en main. Arracher des feuilles à la main manque de finesse et engendre souvent par accident, l'arrachement des couches d'une tige en plus de la feuille. L'objectif principal de la défoliation est de permettre une meilleure pénétration de la lumière et de promouvoir la production de plus grosses têtes. Les feuilles éventails qui font de l'ombre doivent être retirées. Tailler la tige principale et/ou les pousses secondaires n'est pas de la défoliation. La règle d'or lorsque vous donnez à vos plantes un rafraîchissement est de commencer avec les feuilles nourricières les plus grandes et les plus larges, en taillant du bas vers le haut. Il est important de retirer les feuilles stratégiquement et non pas au hasard. Pensez également qu'il vous faut limiter votre rafraîchissement à approximativement 10 à 20 % des feuilles totales de votre pied. Il est très facile de s'emporter durant la taille et de se retrouver avec des plantes chauves. Un excès de taille de feuilles empêchera la photosynthèse et paralysera vos plants. QUAND FAUT-IL DÉFOLIER Il est assez rare d'appliquer la défoliation comme seule technique pour obtenir un fort rendement. La taille des feuilles est généralement associée à d'autres méthodes de tailles et de palissage pour un meilleur rendement telles que le topping ou étêtage, le FIMming, le LST, le manifolding, le supercropping et le ScrOG. Les cultivateurs utilisant la méthode ScrOG auront besoin de retirer toutes les croissances inférieures ainsi que les feuilles et les tiges se trouvant sous le filet. Les plants de cannabis peuvent être défoliés dès lors qu'ils sont passés de la phase de plantule vers la phase de croissance végétative. Cependant, il est recommandé aux cultivateurs amateurs de laisser aux plantes 1 à 2 semaines de croissance végétative avant de s'attaquer à la défoliation de celles-ci. De plus, certaines variétés sont plus sensibles à la taille que d'autres et de ce fait, seront plus stressées par la taille des feuilles. Surveillez minutieusement le comportement de vos plants après la taille. Une période de convalescence de minimum 3 à 7 jours avant de recommencer la défoliation est fortement recommandée pour éviter trop de stress aux plants. Les cultivateurs peuvent également défolier pendant la phase de floraison, ce qui permettra à l'énergie de la plante d'être concentrée vers la production de têtes tout en limitant l'ombre et l'excès d'humidité. Néanmoins, il est important de ne pas défolier trop tard sous peine de simplement blesser ses plants inutilement. LES AVANTAGES DE LA DÉFOLIATION Évidemment, l'avantage numéro un de la défoliation, c'est l'augmentation du potentiel de rendement de cette technique de taille pour tous types de cannabis allant de la photopériode aux variétés autofloraison. Ce n'est pas un secret que les fleurs qui reçoivent plus de lumières deviennent plus grandes et larges que celles dissimulées dans l'ombre des feuilles. De plus, retirer les feuilles intérieures des plants touffus aide à prévenir toutes menaces de moisissure. Les plants très feuillus avec un feuillage intérieur dense produiront une quantité importante de têtes pop-corn. Dans le pire des cas, les branches de têtes et les têtes qui sont denses succomberont au pourrissement. Si vous observez des gouttes d'eau se former sur la surface des feuilles, il est grand temps de penser à faire de la défoliation. Libérer la zone inférieure et médiane des feuilles est un excellent moyen d'améliorer la circulation de l'air. LES DÉSAVANTAGES DE LA DÉFOLIATION Les plants de cannabis en intérieur bénéficient de la défoliation pour deux raisons. La première est parce qu'ils reçoivent la lumière d'une source stationnaire au-dessus d'eux, et la deuxième est parce que les conditions environnementales sont contrôlées par le cultivateur et non Mère Nature. Les plants d'extérieurs eux, n'y gagnent pas beaucoup, car les cas échéants se vérifient pour eux. Le soleil traverse le ciel, illuminant sur sa route, différentes portions de la plante de son lever à son coucher. Les cultivateurs en extérieur n'ont pas besoin de manipuler les plantes afin qu'elles se développent en adoptant une structure plate puisque le soleil est infiniment plus puissant que n'importe quelle lampe de culture et qui plus est, il est toujours en mouvement. Tailler les feuilles des plants extérieurs les rend également plus vulnérables aux conditions humides et brise leurs barrières naturelles contres les nuisibles. De nombreux cultivateurs d'intérieur peuvent, et malheureusement, c'est souvent le cas, réduire le rendement final à cause d'une défoliation faite au mauvais moment et/ou excessive. Tailler les plantules n'est pas conseillé et engendre souvent des plants nains. Scalper les plants matures est encore pire, et au lieu d'obtenir de longues branches de têtes, vous obtiendrez probablement encore moins de fleurs. De même, tailler des plants malades ou en mauvaise santé à n'importe quelle période de la croissance risque de paralyser la croissance plutôt que d'encourager la formation de fleurs denses. Que la force soit avec vous 💪
Processing
Likes
24
Share
Hi everyone 🤗 This week is very strong growth nothing happens :-) everything as usual, I think in 2-3 weeks you will move to the flower tent 😍. I wish you all a nice week, stay healthy 🙏🏻 and let it grow 🌱 You can buy the strain at : www.Zamnesia.com Type: Runtz ☝️🏼 Genetics: Zkittlez x Gelato 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡💡☝️🏼 Soil : Canna Bio ☝️🏼 Nutrients : Canna Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 - 6.3 💦💧
Likes
14
Share
@dekss
Follow
*LOS FERTILIZANTES SON HACIA LAS OTRAS PLANTAS NO TERMINADAS NO LA QUE SE CORTO ESA SOLO AGUA* *reemplazo bio bloom por monster bloom como los dos son PK la planta se sobrefertiliza* semana 10 y se va de corte la primera contento de terminar mi primer diario entero en esta plataforma cogollos llenos de resina muy contento con la producción en 68 días desde germinación *la planta en total creo un poco menos que el doble de lo que se corto pero fui sacándoselo de a poco antes* ahora solo queda esperar secar y las otras que vienen en camino 70.85 gramos en humedo contando tallos y una hoja de viento por rama espero marcar unos 15 en solo cogollos y ya secos LST en las dos ramas principales de una de las que viene siguiente muy compacta en lo personal me gustan los cogollos con casi nada de hoja (de esto dependerá cuanto raspe en la garganta) por lo que el humo entra sin dejar ninguna molestia muy suave y sativo
Likes
2
Share
Looking good...
Likes
21
Share
@DRO420
Follow
Switched to flowering . Plants are making their final stretch before producing buds.
Likes
422
Share
Hi all 🧑‍🌾 Welcome to my 🍌💜👊 week update. Hope everyone keeping well and having a great week😁 Thank you so much for so much support on this bananas ride 🙏💜💚💜💚 Everything still going pretty well. Girls are developing and stretching like crazy. Athena currently Dec 14 90cm and main stem of Xena is not far of this height either. Unfortunately noticed first signs of calcium deficiency(my opinion) on Athena. Thankfully started feeding both girls with calmag weeks back but the dosage wasn't not enough for Athena. Started small treatment very next day on Dec 11 (see description below) I belive got my baby back on right track. Week 9 Dec 11-17 Dec 11 Watering was planned for Tuesday but due to calcium deficiency decided for a little treatment. Watered both girls with mixture of reduced content of growth nutes by 50% calmag at 1.2 ml per ltr. Reduced solution PH to 6.2 as apperently it's ideal for calcium consumption. Over period 4h I have watered Athena with 5ltr with couple runoffs. Xena 3ltr. Total of 7-10 leaves affected mainly at top colas close to the light. Dec 12-13 Purely observation and all looking well. Of course all affected leaves will progres of showing signs but good news is that growth and development booming and don't see any new leaves with symptoms. Very nice trichomes development in recent days and more and more colours. Dec 14 Second watering for this week 6.5l Increased calmag to 1.4ml per ltr and if still things will be looking well reduce to 1 or 1.2 on next feeding. Dec 15 Very nice respond on yesterday feeding. They definitely fatten over night and getting more and more frosty. Will need to remove some foliage soon as getting extremely bushy again. Dec 17 Xenas main stem top cola almost touched the light today. Tied her to left side of the cabinet, applied selective defoliation on both girls, tied few branches to netting and on the end of this busy day a third watering for this week. 7 ltrs beetwen both. Runoffs Xena PH6.4 Athena 6.3. Very nice week have to say. I belive that calcium deficiency on Athena is no longer a case here and both girls developing very nicely. Both are still stretching, buds are gaining in size and both girls started exploding with trichomes, Thank you all again for such amazing support 🙏peace and love brothers and sisters ✌️💚💜💚💜💚 Stay tuned for new week update 😉🧑‍🌾✌️💚
Likes
25
Share
14/07/2022 - Day 56 - First day of the 9th week. Some nut burn. Flushed today. Wish me good luck and let's hope in sunny mild days 🤞☀️ - DD
Likes
46
Share
@Smokwiri
Follow
Welcome to my Bubblegum XL diary by royal queen seeds. Thanks to Royal queen seeds for al the goodies, there are some more like lighters and smartpot. As you can see, my bubblegum xl popped out of the soil, and is ready to grow into a beatifull plant. Lets wait for coming weeks development... I added a small update vid. on day 5.
Likes
4
Share
@Drtomb
Follow
Flipped the lights 6 days ago and already they have grown about 6". This strain will continue to stretch for another 2 weeks before starting to fill with bud sites. Im aiming for a total flowering time of 65-70 days. Ill be watching the stretch and monitoring when the clones are Perfectly mature for harvest.
Likes
36
Share
@grundoh
Follow
Right now I am just playing the waiting game with White Widow and Industrial Plant. Both have shown signs of maturation with their trichomes but neither one has a majority of milky trichomes yet. In hindsight, I should have waited until Industrial Plant was more mature before I started flushing her -- I've lost a few weeks that I could have been continuing to fatten her up. I added more bamboo rods and tied branches to them with some plant tape on both plants. White Widow's buds are rock hard and keep bending its branches so hopefully the extra support will help. I cut off the main cola and a side cola of Industrial Plant CBD due to bud rot that I failed to notice for roughly a week. After cutting out all of the bud rot I could find on Industrial Plant I checked over her and White Widow meticulously to make sure everything was kosher. I added a spare oscillating fan in the tent to try and improve air circulation in the room. I have had trouble with humidity and temperature shifts throughout this grow -- something I'll have to dial in as I progress. I imagine the climate shifts combined with how thick the main cola was probably contributed to the bud rot. Seedsman White Widow Auto is ready to be harvested as of Day 100. Over 2 days her trichomes really started to turn amber. I have started flushing her as of today and plan to harvest a day or two into the start of Week 15. As for Dinafem Industrial Plant Autoflowering CBD? I am thinking of just cutting my losses if her trichomes haven't gotten to at least majority-milky by the time White Widow gets chopped. She just looks mostly-dead and only wants a drink once every 7-10 days now. That and I have some new gear I really want to test out, as well as some different ideas for my second run that I've been itching to get started on.
Likes
20
Share
I could talk to you for hours about this strain, it has many qualities and I always get excited talking about it because it has brought me so much luck and I am very, very fond of it and therefore I always look for the right words as if to describe my best friend or a person I love so well. It's not purple this time, anyone who frequents this site should know by now the famous purple plant I made, famous for its beauty, it amazed everyone first. Color does a lot for beauty and impact on the public but take a good look at this plant. Very compact flowers, with that super density that I like, lots and lots of resin, super beautiful pistils to look at. Let's understand each other well, it vegetated very little, just over two weeks, but very little and it grew very well and with a lot of quality. She had a hermaphrodite nearby, she didn't even inseminate herself like many others, truly a super strain guys, try it! Go to the official website and buy it if you haven't seen it, take a look at the photos with which it is promoted, it's her in all her beauty and majesty... https://www.zamnesia.io/it/9484-zamnesia-seeds-biscotti.html Site description ZAMNESIA SEEDS - BISCUITS: DELICIOUS BISCUITS TO EAT AND SMOKE Spice up your grows and add the Biscotti strain to your cannabis seed collection. It offers the best qualities of marijuana: potency, productivity and intense flavors. Biscotti is made up of South Florida OG and Gelato genetics and contains 22–25% THC, enough to make your body vibrate from head to toe. The genetic profile of this strain is 80% indica and 20% sativa, with effects that will make you feel relaxed and creative at the same time. Plants of the Biscotti variety produce dark green leaves and numerous pistils, while the buds tend to be small and compact. Towards the end of the flowering phase, when nighttime temperatures drop a few degrees, you may also notice purple hues. GROWING BISCUITS: FAST FLOWERING Biscotti won't test your patience. You can break out your scissors and start harvesting her after about 8–9 weeks of flowering indoors. The plants are robust and vigorous and grow well both outdoors and indoors. Under the sun, you can expect heights of 130–170cm and yields of 800g/plant ready in October. Some experienced growers have reported achieving higher yields. So, the results will depend on your skills. Indoors, Biscotti typically reaches a respectable height of 130–150cm and offers yields of 550–650g/m². FLAVOURS, FLAVORS AND EFFECTS OF BISCUITS: DELICIOUS AND COMPLEX Once the drying and curing is finished, you will finally be able to taste the fruits of your labor. Biscotti is definitely one of our tastiest varieties, producing aromas of vanilla and honey biscuits contrasting with the classic diesel notes. A great addition to the kitchen where you can prepare delicious baked desserts. Being very potent and producing effects that can overwhelm the user, we advise you to consume it with caution to avoid becoming overwhelmed. This strain offers a relaxing high for the body, while the creative juices will start flowing in the mind. www.zamnesia.io
Likes
33
Share
She growing like a real trooper 😁 she's super healthy! Supercropped all her limbs again this week but I'm afraid i made a few mistakes this time round....don't supercrop too low! Lost 4 of her main branches :( we currently have torrential rain & gail force winds so I'm not holding out for any branches left after today lol fingers crossed tho....wish me luck!
Likes
14
Share
Day 75 on this blueberry and just like the Grape Wine I discontinued all nutrients except for the little bit of recharge she got yesterday from here on out water only.. this girl looks like she needs another week and a half to two weeks but she's starting to look beautiful and I'm starting to get excited about this one.. due to the ruderalis and low THC content I wasn't expecting trichomes all over sugar leaves and or any on any fan leaves and I didn't get any but the buds themselves are sparkling which is all that matters... Haven't done a trichome check yet I know she's got a little bit but I do want to thank Sensible Seeds for sending me these genetics and I highly recommend you guys check them out they have every strain on the planet and they have seeds in bulk.. hope all is well God bless and happy growing ✌️ https://www.sensibleseeds.com/
Likes
3
Share
@Joaka
Follow
se ve un incremento en tricomas, ya el olor esta muy penetrante. ademas algunos brazos se doblaron lo que provoco que las amarrara para poder sostenerlas. en la proxima semana se sacara todo nutriente que contenga nitrogeno, dando ya el engorde final.
Processing
Likes
10
Share
@GrowerGaz
Follow
This week just water from the autopots and a soil soak with some bio enhancer . Plants are really starting to smell now . Resin production on the Rado z is insane. Sadly they did not make the cut for the next drop. Happy to have been able to test them. I think they look and smell great.
Likes
13
Share