Likes
16
Share
Likes
55
Share
@BodyByVio
Follow
Just got done with trimming the 4x4 @greenhouseseedco Super Silver Haze / @blimburnseeds Silver Surfer Haze tent. The final yield is exactly 1000g plus some (kind of a lot)that I smoke in the last 2 weeks 😃 Also got 6, gallon size ziploc bags filled with good quality trim for concentrate. To be honest I was expecting a little more but keeping in mind that this grow I did not supplemented with bottled CO2 I think I’m good with the results. Definitely I enjoyed a lot this grow and I’ve learned even more.
Likes
15
Share
@moritz
Follow
Temp, Humidity & VPD are all controlled by a Mycodo System to reach a VPD Range of 0.5 - 0.7. Light is at its lowest setting 04.04. I started to add nutrients to the water. 2.5ml of Plagron Terra Grow per 1L.
Likes
43
Share
@valiotoro
Follow
Hello everyone 😎 Week 8 of flower for the Cherry Cola auto from Fast Buds 💥🍒 She grew fast with a beautiful green color,for the nutrient 4ml/L terra bloom & 1ml/L power buds from Plagron Next week Green sensation at very low doses ✔️ Now plain water💧 Spider Farmer SE-7000 100%💥 I will harvest in 2-3 times first the top buds Amazing smell & the buds are super fat & sticky🤩 Happy easter & Have a wonderful day 😎
Likes
17
Share
I'm extremely happy with how she's turning out, I want to give her another week, ideally 2.
Likes
15
Share
To push the pest resistance test even further (so far, the plants have shown resilience against fungus gnats, thrips, and excessive humidity), it’s getting too risky to allow the gnats to continue affecting my roots. As a test, I sieved fine sand from my garden and spread it over the soil to eliminate the gnats' living space. I gave the plants a good watering before applying the sand, and now I’ll leave it like this for a week. By the end of the week, I plan to repot them anyway, so we’ll see if this method clears up the gnat problem.
Processing
Likes
4
Share
@Tepsgrow
Follow
Finalizando el proceso solo con agua. Lavado de raíces y comienza la cosecha! Veremos que resultado nos da el esfuerzo y el cuidado de las FastBuds. Se agregaron unas Black Cream al proceso para aprovechar un vegetativo para lanzarlas al exterior.
Likes
16
Share
Hey there! I’ve only just started using this site and I’m halfway through this grow so I’ll try and fill in the veg and early flower up until this point. This girl really is on auto pilot. She’s just getting bigger everyday with some really good resin production so early I’m really optimistic that this will be a great harvest. 🙌🏼 She’s a really decent size and has responded incredibly well to LST in Veg. The only defoliation I have done up till this point is if bud sites are covered. Any pointers are always greatly appreciated.
Likes
13
Share
@Chubbs
Follow
420Fastbuds-Week9 Strain:FBT2311 What up grow fam. Weekly update for these gorgeous girls. They're definitely getting close to being done and getting the chop. I did a defoliation this week to allow the light down to the lower bud sites. All in all Happy Growing.
Likes
52
Share
@PapaNugs
Follow
A good week here in the tent. The girls continue to grow and progress. Getting a small amount of water daily. Looking for more progression then I'll transplant the best looking ones.
Likes
4
Share
Woche 7 Blüte Woche 3 Die Money Maker lässt sich mit der Umstellung viel zeit. Die Wurzeln entwickeln sich auch weiterhin gut auch wenn sie nicht Weiß sind und im Eimer das Wasser auch mal knapp wird, Sie trinkt sehr viel. In dieser Woche habe ich an der Money Maker wenig gemacht außer das ich die Dünger Komponenten auf die nächste Phase der Blüte geändert habe. Voodoo, Tarantula, Piranha und Bud Ignitor habe ich abgesetzt und B-52 und Tasty Terpenes zum Dünge Schema aufgenommen. Bei Fragen einfach die Frage stellen, genauso bei Verbesserungen und Tipps für mich. Danke und viel spaß mit euren Pflanzen.
Likes
45
Share
Likes
52
Share
I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"
Likes
12
Share
Esta tomas fueron hechas el 13 de Marzo de 2022- Las copas ya formadas empiezan a engordar. A partír de acá el video habla x si solo. Ya nada pueda malir sal :)
Likes
4
Share
@Purkle
Follow
I love these last stages! The girls are still stretching but I decided to give them a defoliation a week early. If you look back on last week you can see how bushy they have gotten so there was a definite need to get some light to the lower bud sites. I can definitely start to smell the familiar gassy aroma coming through now so may be time to get the fan and carbon filter cranked up. I will be top amending the soil again at some point this coming week but as for now I have just been feeding with water and liquid seaweed. I've had a few compliments from friends on the good health of the plants this time round compared to previous grows when the Sour Diesels had nutrient issues, not helped by the Coco medium I was using. I'll be sticking to this choice of soil and organic nutrients with the results I'm getting so far! I mean, look at those pistils!! 😁 I love that I've had 93 views on this diary so far! Thanks to everyone that's checked it out but I'd love some feedback? If you like what you see please drop me a like and if not, let me know what I can improve or do differently? I've got another video for you guys from today so I hope you enjoy it :). Until next week! ✌️
Likes
10
Share
Transplanted on last day of the week as the other 1 liter pot just didn’t hold water long enough. Add slow release palates, crushed bone meal and a bit of mycorrhizae.
Likes
62
Share
@Chucky324
Follow
Hello. This is the end of week 8 and the beginning of week 9. I started flushing yesterday. With this heat around here they were fairly dry and took a lot of water but there was 5 gallons of run off water in the barrel when I was done flushing. A few days ago I picked all the dead and crumpled leaves off. there was a 1/2 bucket when I was done. Plant's #3 and # 1 are finished and could be cut down now but I will flush for 2 weeks more. Plants #2 and #4 will be finished soon. Plant #5 is the only plant that will be ready at 10 weeks. I took some Taster/Tester clippings yesterday. They will be able to tell me which clones I will want to keep and which can go. I'll talk about me for a bit. At the end of my Purple Paralysis diary I had a swollen tonsil removed and it was sent away to be tested. The test said it was cancerous and the tumor was right up to the edge of the cut so they (the cancer doctors) want to cut more of the area around where the tonsil was and give me radiation to kill the cancer virus. The thing is, I've had 3 tests done: a CAT scan. The one they inject you with radio active isotopes that stick to the cancer and the magnetic imaging test. All tests have showen No Cancer in the upper part of my body. I'm over 60 now and have read about this guy helping people with cancer and said to myself if I ever get cancer I'll try this Rick Simpson Protocol. So I'm on my 2nd batch of RSO. The doctors don't think the cannabis oil will work and still want me to have surgery and radiation but I'm holding my ground and have told them, you get the same rules as I give the dentist. If you can't show me on a test or x-ray what the problem or cavity is I'm not going to let you do anything. With faith and hope I'm putting my life into the cannabis oil treatment. The doctors will see me every 3 months and check my neck for lumps and put a camera down my nose and throat hoping to see something they can cut out and make some big medical bucks (You know the comic The doctor says to the nurse "This will pay for my kids braces") They will consider the cancer dead after 5 years. Wish me luck. Chuck.
Likes
27
Share
@Chubbs
Follow
420 Fastbuds Week 5 Blackberry Auto What up what up. Weekly updates on these two magnificent girls. They both are showing some really cool colors not only on the flowers but leafs as well. It's been getting cold a few day this week so possibly temperature manipulation. Both seem to be happy and healthy up to this point so continuing with the same routine should work fine. I think I'll add some nutes this coming week to boost flower production and give them a little helping hand. All in all Happy Growing