Bubble Kush is looking good. Hopefully, we are going to see some nice growth in the next week or 2. I've just been keeping the medium, not bone dry, but there were some fungus gnats. So I have let it dry out more than I usually would probably because I wanted to sprinkle some Diatomaceous Earth on the soil, and it only works once the soil is dry. Once the Diatomaceous Earth gets wet, it is no longer effective against insects. Other than that, the plant is looking really good. She seems to be enjoying the new 8 gallon container. I'm watering around the perimeter of the pot. Predominantly, to encourage the roots to grow into the pot. Also, to activate the soil and The Dry amendments. 31.7.25: I watered with 0.5ltrs of dechlorinated water PH'd to 6.0 with; 💜 1ml Trace PH: 6.0 PPM: 387 3.8.25: I watered with 0.5ltrs of dechlorinated water PH'd to 6.2 with; 💜 1ml Trace PH: 6.2 PPM: 371 4.8.25: I watered with 1L of dechlorinated water PH'd to 6.6, containing the following nutrients; 💜 1ml Ecothrive Trace 💜 1/4 TSP Ecothrive Biosys PH: 6.6 PPM: 385 Thanks for stopping by and hanging out 🙏💚✌️🌱😁

Hi fellow growers, for this first week of flowering, everything went smoothly. She took the defoliation from last week well and kept growing strong. She took 8cm during this first week of 12/12, nothing crazy but I hope she is gonna take more this coming week, so that she has pretty long main branches by the end of stretching. I'm glad the smaller branches that occupy the middle grew well and full up this empty space. I'm tucking daily the fan leaves from the main branches to allow a maximum light to reach the branches from the middle. Last week I was wondering if I had gone too strong on the defoliation and then I read about this schwazzing technique, when one defoliates even more, basically removing most of the leaves, this on the day of switching to 12/12 and then doing this same heavy defoliation 20 days later. So be prepared, in two weeks I'm gonna apply the recommended second heavy defoliation and we'll see how that goes together. 😁 Humidity is around 70% at the moment, it's on the high side but I'm not too worried about it. For the nutrients, I'm still religiously following the biobizz schedule and so far, so good. I started this week to log everyday some basic data about the plant, like height, temperatures and humidity. I guess it would be nice to have a little graph at the end to see the evolution of the plant or whatever one wants to do with the data. I think it's good practice too. -- Stereoscopic pictures -- You might have wonder what the hell are those two pictures where seemingly the same picture is put two times. They actually are stereoscopic pictures or 3d pictures. It's using the same principle as 3d for movies or virtual reality and it tricks your brain into seeing in 3d. Basically each picture is the view from each of our eyes. I made those pictures so it allows to see them in 3d without glasses. Follow along with this little tutorial (The picture "stereoscopy 2" is easier. I find it as well easier on a computer as smartphones have a smaller screen): - Having the pictures in front of you around 30-40cm (15-20cm on smartphones) from your eyes, start crossing your eyes slowly. - Both pictures are gonna move toward the middle. The idea is to make both pictures superpose each other in in the middle. - Start to focus on the superposition in the middle and if necessary, adjust the distance between your eyes and the screen. - Once it's in focus, you will instantly notice it and see my weed in crystal clear 3d! You can then move your eyes in the picture and enjoy it. - With a bit of practice, it becomes quite easy to focus (1-2s only) Even the NASA does it! https://stereo.gsfc.nasa.gov/gallery/crosseyed.shtml Let me know in the comments if you managed it and if you find it cool or not! 😉 Take care everyone and see you next week!

Hello. This is the end of week 1 and the beginning of week 2 of flowering. Man have these plant shot up. It's at this point that I could put in a net but I haven't figured out how to tie it in and still open the tent form the inside too. I'll just tie up the branches to the top roof poles when the branches start to fall over like last year. I already have the clips and twine I used last year. I gave the plants their first mixed flowering plant food last week, which is why they shot up so much. I'll let the plants just grow this week and then do my final trimming/pruning next week. Although these plant will be finished around 9 weeks of flowering I like to grow them 10 weeks. When I first started growing inside I wanted stuff that finished fast. 45 to 55 days is what I grew back then. But then I thought about growing 9 weeks and a whole group of plant that I wasn't growing opened up to me. Now I like to grow all the plants to 10 weeks. And now that I have more space I'm think about growing sativa's up to 14 weeks and collecting some pollen for crosses. I like Ace Seeds for sativa's. On to book 4 of the Fat Freddie's Cat series. One of my favorite artist of that era. Thanks for lookin in. Chuck.

Hi, topman! Yesterday we had defoliation big leafs, also was make regulation to stem of plant to the same high how its head. We have about two same weeks for change light of time on 12/12 for Part-Bloom. We are going to growing big place! You’ll check and looking at this report! See you, my dear topman!

_______________________________________________________ Mo. 9.2. - Pflanzenhöhe 25cm - Topfgewicht 5700g / 6300g (l/r) - 2,0 Liter pro Pflanze gegossen ( = 8300g ) _______________________________________________________ Di. 10.2. - Topfgewicht 7300g / 7600g (l/r) - Toplight Abstand auf 75cm erhöht _______________________________________________________ Do. 12.2. - Topfgewicht 6200g / 6800g (l/r) _______________________________________________________ Fr. 13.2. - Topfgewicht 5600g / 6400g (l/r) - 2,3 Liter pro Pflanze gegossen ( = 8700g ) - 0,3 ml / Liter "Calmag" _______________________________________________________

Day 86 - 04.04 - She is still pushing that nice sugary and seems healthy ❤️💛💚

End of week 4 of flower Both plants are doing very well Surprisingly the one in shared pot looks even better Only 4 more weeks to go STAY SAFE EVERYONE!

Hello dear cannabis lovers, Did nothing this week but watering with little Epsom salt added because water is soft around here. She is beginning to puff up, and grow those buds, smelling flowery and sweet with some pine and earthy smell. Very easy to grow and those 2 sisters looks and smell exactly the same, solid lineage!

QUESTION TO EVERYONE READING THIS: My tap water is pH 8.3 (yes I know right ?!) Adding the BioBizz nutes brings it down to pH 6.2 - 6.4 depending on the amount which is great. Now, I dont really care about runoff pH that much, doesnt tell me a lot imo but I measured it twice, last time it was 6.8 this time it was 7.1. Is there anything to worry about or is that just irrelevant? Thank you guys :) Day 48: Watered the G13 Haze with 650ml Water and 2.8ml / l BioGrow, 2.8ml / l BioBloom, 0.7ml / l TopMax which is the equivalent biobizz week 7 feeding schedule with 70% strength on BioGrow & TopMax and 90% strength on the Bloom. Therefore, dont mind the leaves hanging down, I just watered before taking pictures. Also redone some of the LST by changing the "angles" of the side branches to use up space more evenly. Tied down a bit more aswell to even out height differences. Looks great so far, but the G13 Haze is quite a bit behind in budding, the Liberty Haze is throwing Pistils everywhere, the G13 Haze just started showing the first noticeable preflowers with pistils on the nodes. Day 45: I really wanted to try serious and "professional" training methods. Defoliation was obviously needed, I couldnt even see what was going on below the plant. Removed all leaves except on the top 2-3 nodes of each branch. Then I did some heavy LST to move the side branches to the outside for filling up space. I hope the center will grow some branches at some point. MOST IMPORTANTLY, since I wanted the main branch to slow down growth a bit, I twisted and "mashed" it between two fingers until I could hear a snapping noise and the stem became weak like gummy. It takes a lot of courage guy! A LOT. But it seems to have worked, the stem is not broken and I managed to tie it down without bending the whole plant. I am so excited on how this is going to turn out. ~Watered 600ml today Day 44: So yeah, definitely stretching ! The internodal space is way bigger than I'm used to from growing short indica quick ones. Funnily enough, the G13 Haze does'nt give off any smell at all apart from typical "green plant" smell (Just noted that because the Liberty Haze smells quite strong even though it doesnt form buds yet). Did some very very careful LST which looks good for now. I want to remove a lot of leaves and little side branching from the bottom as soon as the plant grows a bit bigger so I can access the bottom part better.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

- Been flushing for 3 days now. Still showing more purple tones, not much yellowing yet. - This will be my last post before harvest! Can't wait!

This lady looks absolutely gorgeous, she's got big beautiful leaves, I cannot wait to transplant this lady and make her become a beautiful fat bush! Let's do this! I'm very glad to be working with this strain this 2021 outdoor season, this lady has been Transplanted after 34 days since planted to her definitive 30L texpot, let's see how this lady performs!!

Week 17 Last week before harvest. Just let the plants ending the maturation process. Good synchronization between the different strains, selected with an approximate identical flowering period. I want harvesting all the plants at the same time. Flowers are dense, hard and thick, pretty resinous. 4 strains = 4 different smells, 4 different colors….🤩 I flushed consciously and stopped watering 4 days before the harvest day. I turned off the light during 48h, with ventilation on. All is ready for the cut. Date is programmed to the full moon period….why not…🤔 I will trim a little bit the plants before cutting and hanging them in the tent with the same ventilation cycle, no light of course…

#3 has beautiful pink buds very happy with these girls, hopefully the other two show some colour as the Temperature comes down. Have swapped the 250 red CFL for a 150 blue. May turn it off for the last week to get every last bit of pink possible! Pots have a nice wet dry cycle, have tried to hold back and not over water so I've been watering with a spray bottle. I use a 1L hand spray bottle and fill it up three to four times depending on the weather. Although it seems impossible to overeater with the breathable fabric pots. Which are awesome if I haven't said already. Perfectly fit 11 in my small cupboard which is lucky as I ordered ten as soon as he free one arrived without measuring them! Stoners eyes never lie! 👁️ Buds should be huge if they keep going at this speed! Haven't topped them for the natural look, been a few years since I've done it can't wait to see a big fat cola bud at the end!

Plant is doing good. Values are average of the day. DATE - EC(us/cm) 20250326 ~1000 20250327 ~1000 20250328 ~1000 20250329 ~1000 20250330 ~1000 20250331 ~1000 20250401 ~1000 DATE - PH 20250326 ~6 20250327 ~6 20250328 ~6 20250329 ~6 20250330 ~6 20250331 ~6 20250401 ~6 DATE - ORP (mV) 20250326 # 20250327 # 20250328 # 20250329 # 20250330 # 20250331 # 20250401 # DATE - °C - RH% (Tent Temp/RH) 20250326 22.7 61 20250327 23.2 52 20250328 24.9 46 20250329 25.0 45 20250330 24.0 48 20250331 23.7 53 20250401 24.1 47 DATE - °C (Reservoir) 20250326 # 20250327 # 20250328 # 20250329 # 20250330 # 20250331 # 20250401 # DATE - CF 20250326 # 20250327 # 20250328 # 20250329 # 20250330 # 20250331 # 20250401 #

Ok so initiated flushing after using the finisher for around 5 days it's getting exciting now she's smelling just as sweet and cheesy as it did a few weeks ago. Can't wait to smoke her! Might doing her again next time as she did so well

# 1 plant ( big one) watering with grow big as soil is not as hot as fox farm, # 2 ( runt) in fox farm soil only getting pHd water along with humic and kelp. Middle week update # 2 making a cone back aslo topped her was curious to see what will happen # 1 just growing fast

On cure, pulled a little early unfortunately due to bad weather