The ladies have fully recovered from whatever nutrient issues I was having. I think the answers hit the nail on the head when it came to ph imbalance, too high EC (too much nutrients) except for a lack of potash. I cut my nutrients down, lowered the PH, and added in more bloom this time around. So far they look great!

It's been 68 days of flower now and they only got another week or week and a half left. I have been flushing them for 10 days now. Almost there 🤘🤘. I'm very happy how they have turned out, the color, the smell, the crystals 👍. Very proud of what I created. VERY IMPRESSED with the fc4800 and I was already very happy with the tsw2000 👍 The gals are still loving the new fc4800, TSW2000 and their new 8x8 mars hydro grow tent as much as I do👍 leaves are sticking straight up towards the light. Love how easy the zippers are to open and close. Nice and strong and guaranteed to last. It has extra material on the backside of the zipper that helps for light leaksand enough ports and vents for anything you need in it👍. the tsw2000 is still going strong and is also a very good light. Its been going almost nonstop for 6 months and still working the same as when I got it👍. not much heat off both lights but the fc4800 is alot cooler and the heat-sinks work extremely well. I have it daisy chained to the tsw2000 and 1 dimmer controls the other and i don't need to be reaching in too far to dim the other light, it's awesome and I can't wait to buy more lights to daisy 4 together👍. I would recommend this light to everyone that grows with leds and have trouble with temperatures getting too high. Even if you grow with HPS lights I think any mars hydro light is a MUST TRY. I like how heavy both lights are because I know it means they are built soild and strong 💪. Very good sign with the frost they are starting to get thanks to bith mars hydro lights. I can notice more frost under the fc4800 and I'm thinking it's from the UV DIODES they put on the fc4800 👍. 2 days ago they all smelt like my nuken, sweet marshmallows. But now I can smell the monkey dough and gorilla glue and skunk monkey coming through👍. I touched a bud on the gorilla and monkey fingers smelt like fruit loops👍 really pleasant smell. Lingered on my fingers for atleast 30 min. I'm glad mars hydro is under priced compared to some brands and for how popular they are. usually companies would charge more. Thanks mars you guys are awesome 🤘🥁🎸. I'm getting a new exhaust fan soon. An 8 inch that will work alot better than my 4 inch lol. Wayyy to small for a 8x8 Grow Tent. Dehumidifier is going almost non stop to try and get the humidity down. I love how both lights on 100% power only raise my temperature 2 or 3 degrees 👍. You can rest your hand on the lights and not much heat comes off them. Obviously there is some heat but for the brightness of the lights and only raising the temp that much is awesome 👌.  And if I wanted to I could remove the driver from the fc4800 and run it on the outside of my tent because the cord is so long but 2 or 3 degrees is barely nothing👍. The girls are starting to bulk up abit now and only 3 weeks of flowering, these lights are awesome 👌.  My last run of monkey dough and gorilla glue didn't start showing alot of crystals until week 4. These were only 2.5 weeks and I started noticing some frost. Next week I will be able to tell more about what these custom bred seeds will be like. I love how the smell is changing now. Didn't want all them to smell like nuken marshmallows lol. It's awesome that I can get right inside the tent to do any work i need👍. Even if I wanted an 4x8 tent. I'd rather this 8x8 because it's so easy to work with the plants and have so much room to move around and massive headroom when I'm in there chillin with the gals🤣🤘. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress2 Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

Week 2 of veg on these beautiful girls. They've doubled in size since last week and are still showing daily growth. Starting to see a pistol or two so I know the preflower stage is knocking at the door. Over all they're looking healthy showing no signs of any deficiencies. Happy Growing.

Die Woche ist wie im Flug vergangen – und leider habe ich es verpasst, Fotos zu machen 📸. Aber keine Sorge! Ab jetzt gibt’s täglich ein Update, damit man den Fortschritt der Blütephase in voller Pracht verfolgen kann 🌱💥. Ich bin gespannt, wie sich die Ladys entwickeln, und freue mich darauf, euch alles zu zeigen! 🚀 The week just flew by – I missed my chance to take photos 📸. But don’t worry! From now on, I’ll be posting daily updates so you can watch the flowering progress in all its glory 🌱💥. Excited to see how the ladies grow and can’t wait to share it all with you! 🚀

Harvest Week 19, 19-25 February 2025 19-24 Feb - Observed and let the plant mature. 25 Feb - Harvested the plant, began the curing process. Jealousy Glue matured beautifully. I love the sweet, piney smell. The trichomes are mostly milky with very few amber colored, most hairs have turned brown, leaves have faded and turned purple around the bud area, all this is fine with me. The breeder recommended 68 days in flower, which is close to spot on with what she was grown in. She appears to have large, thick, resinous, and smelly buds. Very colorful I might add. It has me thinking her smoke must be good! She was cut down the morning of 25 Feb. All big leaves were cut off, and it was hung upside down in a closet by it’s branches. With a set RH of 55%, and temperature of 65 degrees F., it will hang here for 7-10 days, in darkness, with a slight air circulation (not directly on the buds). After that time the buds will be hand trimmed and then put into quart glass mason jars. I’ll place a size 8 Boveda 62 TerpShield in each jar and burp them until 62% RH is achieved. This usually takes about a week. Here they will cure for an additional 30 days. It will last in this state for a good 6-8 months. The Smoq Report will follow in about 2 weeks. - 19 Feb nutrient solution changed - 19 Feb feeding schedule updated - Using reverse osmosis water with EC/TDS at 0 - Nutrient Solution EC 0.8 at 51 degree F - Adjusting PH daily to 6.2 using GH up/down - Light power is at 75%, DLI 45 canopy coverage at 12hrs - Using General Hydroponics, HGC728040, Dual Diaphragm Air Pump, 320 GPH That is it for this grow. Thanks for the look, read and stopping by.

🌺🚀🌺🚀🌺🚀

Flowering day 73 since time switch to 12/12 h. Hey guys :-) Finally the time has come . The lady was harvested and hung upside down in the dry tent 😍. Before that, she stood in the drying tent in complete darkness for 2 days and the large leaves were removed. The small leaves stay attached during the drying process so that they protect the buds and allow them to dry more slowly and evenly :-) . In the dry tent, the temperature is 18-19.5 degrees and the humidity is 54-58% 👍. In this environment they are now allowed to hang for 10-14 days before they are fine-tuned and trimmed clean by hand. then after trimming they come to ferment for 6-12 weeks in dark jars with bobeda packs 62% to keep the perfect humidity. After a few weeks, the Boveda packs 58% are used so that they can slowly dry out :-) . Of course there is one last update after trimming. Until then, I wish you a lot of fun with the update. Stay healthy and let it grow 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Clearwater Seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

Great Harvest, colors, smell, taste and bag appeal are all there . Finished exactly when they said it would . You dont need cold to achieve purple colors . Thanks 420 FastBuds

Habe sie vorgestern das letzte mal trainiert vor der Blüte 🍀 Wachsen wie verrückt mit dem richtigen Setup, das macht echt einen Unterschied. Selbstbewässerungssystem und CO2 Anlage habe ich mir ebenfalls zugelegt die in morgen Installiert werden. Noch ca. 1 Woche Veg dann gehts ab in die Blüte

Hello guys :) Week 7 of flower is here and its just great. i cant wait for christmas 😅 i gave half base nutrients this week but still full booster, next watering will be only water till harvest.. Critical Kush is nearly rdy, Gorilla can take 2 weeks and the OG is coming rly slow but nice

Aug 3: this is a very promising looking plant. She’s quite big and flowering quite quickly which is a great combo. She was the exact same size as my other photoperiod until the start of flowering two weeks ago, and now she’s bigger and flowering faster. Humidity is quite low during the day so I’m continuing to mist the leaves a few times during the day. Did a foliar spray of Extreme Blend and potassium silicate this morning. Aug4: did a major defoliation to remove small lower buds and stuff that was growing in toward the centre. This improves light penetration and air flow which are super important but also forces the plant to direct the energy where you want at the main colas, and not wasted down below. Aug 5: lots of buds forming quickly on lots of decently uniform colas. Should be good. Big rain last night but plants were in dark garage. Watered this morning with 27 C water that had blackstrap molasses, soluble seaweed extract, Monster Maxx and Cal-Mag. Did all four on the weak side of the standard concentrations listed and just 1L used on the plant. Much cooler today so she won’t need as much water. Aug 6: added UV lights from AC Infinity. Very well deigned and manufactured like all of their gear. These are indoor lights so fair weather use only. This far north (53 N) we run out of strong sunlight before it gets too cold in the fall. Idea is to use UV lights for a couple hours each day centred at peak sun (currently 1:39 pm). UV light is the main environmental limit on THC and this will make the light in Edmonton in September more like California in July. Should have a big impact this far north. At other end of light spectrum, I use Forever Green Indoors (FGI) 730 nm far red light as a bloom booster. A few seconds at dusk is all it takes for the far red light. This is the third season using the far red light and it definitely works. #seedsman420growoff #seedsmanseeds

I cut them down the night before the open houses started. The White Widow looks really good. I put them in darkness for 72 hrs, then cut and hung the whole plant, then wet trimmed hung for 18 hrs/day and put in paper bags for about 6 hrs/day for 4 days with a fan oscillating close by. Then in bags for one day, now they've been dry trimmed and put in jars. 50g for the White Widow and it looks great. I can't wait to smoke some.

Another good week. She's filling out nicely now.. her citrusy smell is starting to come through. Had no issues this week.. planning on adding some boost to her next few feeds.

Ok so had a lot to do this week harvested the large critcial mass to which I got 6 n half 0z from one plant so happy with that i also had a few issues with enviroment mainting right temp and humidty as been a lil issue but think all is well now so there all now on the 7 week of flower think I may push these as far as I can to maximise yield potential overall a real good plant to grow had very few issues from start to finish a top strain a deffo keeper for the garden of mothers in my opinion

Mild defoliation throughout this week. Flush imminent so will leave the remaining fans as nute banks. Next run with these genetics I'll be running a monstercropped clone under this scrog and will go heavier with the defoliation earlier on. I was advised this on here this grow and did a bit but have learned I need more! Forever learning. Looks like it's gonna be an epic harvest. These girls smell absolutely dank. Testament to the quality of these Madame Grow Fertilisers. Harvest just get better every time! Also big shout out to my bro at NatureDelight.co.uk providing some awesome organics to add into the grow schedule. Used The Active Sugar Boost all through flower at 3ml per litre this run and I think the results speak for themselves. I cannot implore you guys enough to go check this stuff out. It's unique and you wont find better customer service. Lots of vids and content this week as we all love bud shots <3

2024-08-06 with this Update, iam back in the Timeline. I will not win any beauty contest with this strain becaue of the look, but she shows alreay great volume of Flowers. structure is perfect i placed the Outdoor under a roof i kinda under watered them in the Past and i fertilised them, so not enough water and fertiliser- they are burned. shit happens- thats the Look Fatso GMO F1 Auto, a feminized hybrid strain, emerges from the crossbreeding of two autoflowering varieties: Fatso Auto and Cotton Candy Auto. This California-derived cultivar leans slightly towards sativa, offering growers a straightforward cultivation experience coupled with impressive yields, robust THC levels, and a delightful palate featuring sweet, candy, and fuel undertones. Thriving both indoors and outdoors, Fatso GMO F1 Auto exhibits above-average resistance to mold, while still benefiting from adequate ventilation, particularly in environments with higher humidity levels. Its exceptional resistance to pests and pathogens ensures hassle-free cultivation. While indoor plants maintain a compact stature of around 100cm or less, outdoor specimens can stretch a bit taller, reaching heights of up to 130cm when grown in open ground. Completing its entire lifecycle within a maximum of 75 days from germination to harvest, Fatso GMO F1 Auto delivers yields considered average yet impressive for an autoflowering strain. The combination of high resin production and elevated terpene levels renders it an excellent choice for cannabis extract production. Its terpene profile presents a sweet and funky aroma with savory hints of Skunk complemented by pine and floral notes. On the palate, it delights with flavors reminiscent of sweet candy underscored by subtle fuel undertones. With THC levels reaching a high of 24% and minimal CBD content, Fatso GMO F1 Auto delivers a balanced and uplifting effect, appealing to enthusiasts seeking a satisfying and harmonious experience.

Day 91, plants #1&3 are still maturing and not ready to be chopped. They are definitely running longer than I expected. I have plant #2 in jars and curing already. Total dry weight for her was 98g or 3.5oz!!! Definitely more than I was expecting. I was hoping for 1.5oz so I’m definitely a happy guy about that!!! Update #2: upon further investigating, looks like I’m going to start flushing the last 2 plants in a couple days when they go through all their current nutrients. They’re about ready to come down. I harvested last two plants on day 98. Currently drying. I will update with final weight in a couple days.

#1-03/02/23 first one to come down will update as I cut more down!! #2-06/02/23 #3-06/02/23