The Grow Awards 2026 🏆
Likes
Comments
Share
@Franco123
Follow
the plants slowed down a bit this week due to pruning, but then they resumed and are developing well
Likes
4
Share
This pheno turned out to be absolutely gorgeous in color and smell. Piney and fruity. One of the bigger yields in the tent and a very unique growth structure due to the fasciation. I am really excited to dry and trim these big beautiful buds. The smell is delightful too. I may try to reveg this pheno. I wanna grow this one again! 3rd phone is getting flipped to flower now. Will give actual dry weight once done drying out. Smoke report coming soon too.
Likes
8
Share
@Cadman
Follow
So the nuggets are dense and doubling in size every few days, the trichomes are cover the plants and they are sticky. The Girls are thirsty, I'm topping them off every other day with 1.5 gallons of nutes, at this point I feel like all i'm doing is mixing nutes in the reservoir. By the time I switch over season two to the grow room, i'm going to increase the size of my reservoir to 10 gallon so I can spend less time mixing. I'll be flushing out the buckets in 2 weeks to give the girls fresh water for the final 2 weeks! My Burp bucket project worked out great. Thanks to several youtube videos those videos are much appreciated! I made a few modification to what I saw online. so here's the parts list: (1) 3.5 gallon Menards Bucket (1) Gamma Bucket Lid 18" Black Irrigation drip tubing 12" Fish tank air hose (2) Fish tank check valves (1) tee for air line (1) small fish tank pump I started out modifying the input, most of the videos I saw had a hose with a check valve just poked in the lower part of the bucket with pin holes and end tied off. What I did is I took the black tubing and circled the bottom of the bucket, then I took a small drill bit and drilled holes through the tubing about every 2 inches to disburse the air all the way around the bucket then I used a tee to connect the 2 ends of the circle and connected that to the tube entering the lower portion of the bucket. the next change I made was instead of having a short hose poke through the upper portion, I drilled a small hole and hot glued the check valve inside the bucket with only the top of the valve sticking out of the bucket. After you get all the hoes and check valves in snap on the Gamma Lid, Tighten it up and turn on the pump. I added the hoses going into the water so you could actually see that its working I plugged the pump into a smart outlet and set it to run for 20 min 3 times a day, so no need to manually burp your nuggets while they are curing. You'll also need to put a 62% boneva 2 way pouch in the bucket with the nugs to keep the humidity correct and optionally have a small hydrometer to verify, I'm going to mount one on the lid to be able to check it without having to open the bucket. unless curiosity gets the best of me....
Likes
11
Share
8/28: She's my last CC bean out of the original 7 that I received. (only ordered 5). I will not be ordering any more of them, but it is really good bud, so I figured why not.. I had 2 out of 3 seeds germinate last grow, and only 1 out of 4 this time....if they hadn't sent me the two freebies I might not have even been successful at all last time... I will FIM this one to try and increase the yield a little... She's in the 5gal tall black plastic pot with the white zip-tie loops on both sides.
Likes
31
Share
Hello guys, we are in the tenth week of veg, I have had some delay so I have to postpone flowering for a week. On day 64 I defoliated the girls and took about 60 clones .. Another 40 clones have already taken root so in a few days I will plant them in the pots
Likes
10
Share
MIMOSA ZKITTLEZ / GANJA FARMER WEEK #18 OVERALL WEEK #8 FLOWER This week she's done harvest next week her buds are dense and are covered in trichomes. She's got that amazing red, green, and purple color going on she smells of a citrus and sweet aroma. This lady was a beast!! Stay Growing!! Thank you for stopping by and taking a look it's much appreciated!! THANK YOU GANJA FARMER!! MIMOSA ZKITTLEZ FF/ GANJA FARMER
Likes
Comments
Share
She dried in about 13 days. It was the third plant out of four I had to trim. She trimmed up pretty easily. It was a pleasant surprise. Got 12 oz total. She has some nice chunky, dense, terpene rich buds. That are also covered in frost top to bottom. She took a little longer to dry because buds were so dense I had to let sit out overnight in trim bin before jarring. My test press went very well and she yielded a little over 15 percent. I still am curing the rosin but had a little test of it and was very nice. The terps are very thick and mouth coating. The flower is burning fine before any curing and the flavor is already shining I cant wait to see how it is after a little cure.
Likes
20
Share
Hey guys! So, finally Saturday I chopped her down. She looked now ready and delicious, although I only notice yesterday how many seeds she has allover the place. She hermied in front of me without noticing, not good at all and need to start looking much better and in detail into the plants. Feel like an idiot now. Anyways, it was a full week! Emptied the grinder collector and pressed it down a little, makes a very nice smoke, light but pleasant, the kind of stuff it keep you going all day without the dumb effect. From all trimming made the bubble hash. Got a little too green as the 220micron bag's stitches slightly opened letting some contaminants in the final mix, hence the green color. This was a hit. in opposition to the grinder stuff, this sent me straight to the moon, really heavy stone effect, even thinking was hard. Reminded me those afghan/ moroccan balls we used to get back in the early 2000's. The weed itself it's still drying so the smoke report will be updated in there. 715g of fresh cut plant is good, let's see the potency and the seeds. Might turn it all into bubble hash, if I see it'll be an hassle to remove seeds. On an earlier bud I've cut and dried, smoked it and you can see pure white ashes in the bong. Ain't that a beauty?
Likes
9
Share
This week I fed Tea ☕️ that consisted of my own worm castings from the bin I made a few months back, molasses for the microbes , and a chicken manure product from Coop Poop. I can already see the difference, unless that’s my mind playing tricks on me, but I like to think that it is working! I think my own castings are the real catalyst to new growth; both now as well as in the future! I did check the trichomes on the plants that seem to be entering senescence (final stage of life). They seem to be still somewhat clear, so I will wait at least another week to harvest. As far as everything else, it has been an easy, uneventful, grow! ☮️💚
Likes
39
Share
@valiotoro
Follow
Hello everyone 🤩 she grew fast and with a beautiful green colour on the leaves! She has responded superbly to low stress training and topping & i defoliated her aswell and seems didn't even notice 😎 Wish you all a good day and happy growing
Likes
21
Share
A-Week 9-(Day 67) B&C-Week 9-(Day 63) A- Loving life, she is fattening up, easily 3-4 inch round buds, about 8-12 inches long circling the plant. Lots of little nugs filling in the middle 🤩Tricomes are multiplying daily, still almost 50% clear, 40% milky, and 10% amber or so. Couple of weeks left, gotta keep air flow high and RH low with those dense buds 😎💨 B- After looking back on last weeks photos, she has really started to thicken up. She has big calyxes, and are stacking nicely. Tops on tops for this one. Her LST and topping created a very dense canopy, similar to A, but B stretched a little more. C-Done her stretching, she is now focusing on bud building. She is stacking nicely, and I said it last week, I’m pretty sure she will be the biggest producer if she fills in as thick as her sisters are 👀💥 No issues, no pests, not even Gnats. A tip I got from WTTGT, Woooooooooh! Was to store your soil/medium near the exhaust of your tent so it always has dry warm air blowing on it. I have not had any issues with pests since doing this before starting this run, and then adding another to the mix mid-run(my GG#4) has had no issues. The 975 ppm seems to be their sweet spot, I don’t want to push it as it has been almost uneventful with regards to issues or deficiencies. I’m very happy with the Indo nutrients line, and the addition of the Sensi CalMag xtra together have made this run super easy, considering Autoflowers are far more finicky than photo periods. The differences between each are drastic, topping and LST can be real space savers for those with small gardens, but clearly the un-topped, un-trained pheno is thriving and will produce fairly well 🌱😎💨 Happy Gardening All 👩‍🌾
Likes
8
Share
@Skunkstar
Follow
Suffered a lot due to heat stress flipped light down to 350W as tent was running at 95f pots had also dried back to much and this seemed to really effect onset of pistil growth also ive started with expload today also taken ec higher after waiting a little at 1/4 strengh nutes until they bounced back watering is now at 48 hour intervals also all popcorn bud sites are being pinched off each watering also still having a 20% run off and discarding that .
Processing
Likes
27
Share
Likes
5
Share
Le prime 4 grapefruit auto hanno iniziato a fiorire ...sono esplose di fiori
Likes
2
Share
@Bdawg
Follow
Jus hanging now wil do diary from start next one
Likes
4
Share
@Jaschkoo0
Follow
I gave them a few l of water with correct ph every Day sometimes every second Day.
Likes
6
Share
53th day of flowering. A good finish also for this fast-flowering strain. A strain that I particularly like. The buds are well formed and begin to thicken. The smell, so recognizable among all, is super strong. No doubt it's Skunk ; )
Likes
20
Share
Cambio algunos fertilizantes para aumentar flora, empiezan 4ª semana de flora. Han respondido bien al supercroping.
Processing
Likes
54
Share
@SAC87
Follow
Day 42-49: I had some growth this week primarily on the R3 and some on the CbDream. Very slow on the R2. I’m wondering if it’s just sub par phenotypes. Idk anymore haha. Just waiting to see what happens here. Don’t think I’ll pack it right full next time. And try to concentrate more on 8-12 tops on a manifold rather than 30 smaller ones. Live and learn. I bought an Inkbird heat and cooling controller, seems to be holding my temps and 77 in the day and 69 at night. I decided to go back to week 4 ratios to see if that helps, they aren’t overly different so we’ll see. Runoff for Cali Kush and R2 which are closer to the heater is 5.75 1000 and R3 and CbDream is 6.05-1.2 1400, so plain water for the next couple waterings.