Transplanted em outside in the ground week 6 they got swamped on week 7 and got severely over watered week 8 I put em in new 45 gallon fabric pots and buried them a bit deeper to help root development they look better today then they do in the video....I'm a newb so knew nothing about ph and the 45 gallon pots have a ph of 8 very alkaline so there now not absorbing nutrient....bought ph down and going to start adding it to water and nutes apparently rain water has a low ph and it's raining again all week....hopefully it helps until I'm able to give them ph down....should be hard for them to get over watered in 45 gal pots...looking like a failed harvest

25/12/18 Week 5 Flower Merry Xmas! All 4 plants are doing well, growth seems to have slowed down so I think the next few weeks are just packing on weight and then ripening. Gonna give them all some pk 13/14 on Friday - had a small problem with fungus gnats in my bathroom which eventually led them into my grow tent. Been waiting extra long between waterings to minimize the chance of them spreading - I know they love wet, mouldy coco. Got some peroxide just incase they become a problem any way. Looking to chop 15th-22nd Jan, depending on how the trichomes are looking. Lots of users commenting on how much weight GZ packs on, really hoping to get some nice dense golf-balls. My previous grow, which was two plants yielded just under 1.5oz, would really love to see a yield around 2.5oz with my current 4 plant set-up. Merry Christmas - more updates in the new year!

Because of the wind some branches were broken. Fixed with bamboos .

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.

Here we are day 55 for our Runtz F1 Hybrid. I would immediately like to say, do you notice anything by any chance? I said day 55 and we're pretty much ready. The leaves are turning yellow regularly, I have removed the fertilizers, the pistils are ripe, the resin is out, there are all the signs for a harvest which should take place towards the end of next week. Here we still have a few more white hairs of Wurlz and Watermelon candy but it's just a few days old. The plants were born on April 6th, I repeat on April 6th for those who cannot grasp the concept. Most certainly Watermelon Candy and Wurlz will be harvested around June 6th, guys...8 weeks...not even 9 or at most nine weeks. Runtz has a great main cola and regularly grown satellite flowers that are not bad. If you're good at math, you do it otherwise I'll lend you some fingers. For topping lovers it means that if you want to do topping on autoflowering plants they won't finish in biblical times, according to my calculations even doing topping shouldn't go beyond three months, like an autoflowering from the previous generation. Why am I talking about the previous generation? Because these have certainly moved forward with speed, I have seen them grow and above all swell the flowers like I have never seen them do. As for the rest of the resin and pistils, everything is really in place. I want to do a terpene inspection soon and evaluate the ripeness for the harvest. The Wurlz also ends a little earlier than the others and is truly lightning. Strong, fast as the wind, stable as promised by Zammi. https://www.zamnesia.io/it/10662-zamnesia-seeds-runtz-f1-automatic.html Feeding is by Plagron with the Power Buds - Sugar Royal - Green Sensation + Alga Bloom combo that drives me crazy https://plagron.com The lights are from Viparspectra p2000 and provide super light www.viparspectra.com/ Tent & Air www.secretjardin.com Music of the week www.radionula.com +++ 432 hz frequencies to keep in line my Girls to Gaia. Site Description ZAMNESIA - RUNTZ F1 HYBRID AUTOMATIC: UNIFORMITY, RELIABILITY, AND GREAT FLAVOURS! What can we say about Runtz that hasn't already been said? Well, trust us when we say you've never seen it quite like this before! From the team at Zamnesia comes Runtz F1 Automatic. Now, this isn't some Formula One car-related special edition, no. This strain takes everything you know and love about the original Runtz and offers a reliable and uniform growing experience that will impress everyone. GROWING RUNTZ F1 HYBRID AUTOMATIC Runtz F1 Hybrid Automatic is the lovechild of Gelato and Zkittlez; the result is a strain that's extremely vigorous and fast to flower (taking just 10 weeks from germination to harvest). While autoflowers generally make for a no-hassle growing option, F1 hybrid seeds take this ethos one step further. Runtz F1 Automatic showcases great uniformity, meaning all plants will have a remarkably similar appearance and output. These plants are also highly resistant to pests and disease, so if it's your first foray into the world of cannabis cultivation, you're in the right hands with Runtz F1 Automatic. Reaching heights of 55–75cm, Runtz F1 Automatic can slot into the pokiest of grow spaces, both indoors and outdoors. But this small stature is not to the detriment of production. Once ready, growers will be treated to a return of around 500g/m² indoors and 100–150g/plant outdoors. AROMAS, FLAVORS, AND EFFECTS OF RUNTZ F1 HYBRID AUTOMATIC Another perk of F1 hybrid genetics is that these plants are teaming with terpenes and cannabinoids, making for a pungent and potent experience you're unlikely to see with other strains. When it comes to delivering massive flavors, Runtz F1 Hybrid Automatic certainly doesn't phone it in. Upon taking that first toke, users open themselves up to bold notes of creamy vanilla mixed with candied citrus fruit. The result is mouth-watering. With 25% THC to its name, Runtz F1 Automatic offers an uplifting, euphoric, and creative high that will suit all kinds of scenarios, whether social or solo. So seeds of all brands, in addition to these great F1 Hybrids and the entire Zamnesia line, fertilizers and everything related to the world of cannabis, you should buy them from the best online store in the sector www.zamnesia.io

Hello everyone and welcome back to another outside grow, This time im growing Pound Cake Auto from Fastbuds, Thanks fastbuds for sponsoring the seeds! Putted the seeds between cotton pads, they did germinate in like 48hours. After that they went straight into the main pots and the last pictures where made at the end of this week. Thats it for now, until next week!

This plant was super resilient and my first harvest. I stunted it in every way possible. Got thrips and took back every fan leave stopping photosynthesis but pushed thru to the end and got some buds to smoke. Ultimately I learned a hard lesson and molded my buds bc I didn’t dry them long enuff. Lesson learned. I actually had a couple clones, one took off and revegged. It’s growing now keep an eye on the other diary.

📅 Week 3 – Day 21 BOX: 50x50 – 100W lamp 🌞 Temp: 27°C 💦 RH: 70–72% 💥 PPFD: 400–650 µmol/m²/s 🌬️ VPD: ~1 – 1.1 kPa This is my first time planting directly into the final pot, and the difference is clear – I definitely saved a few days of growth. Watering volume is increasing steadily: started at ~400 ml and today I went for the first runoff with about 800 ml. EC stays on the lower side, around 0.6. They’re also getting Power Roots and enzymes. DOKI got her first LST today. Stay tuned – and keep growing 🌱

This was a solid week but my PH keeps dropping. PPM dropped from 780ish to 560 so I know she's eating. Buds are forming nice and compact for their first week of actually forming. Other than the PH problem that I'm correcting daily until my fresh res change, my tallest stalk in the back grew into the light so hopefully those buds don't bleach! Open to constructive criticism btw!

Hi all 🧑‍🌾 Welcome to my 🍌💜👊 week update. Hope everyone keeping well and having a great week😁 Thank you so much for so much support on this bananas ride 🙏💜💚💜💚 Everything still going pretty well. Girls are developing and stretching like crazy. Athena currently Dec 14 90cm and main stem of Xena is not far of this height either. Unfortunately noticed first signs of calcium deficiency(my opinion) on Athena. Thankfully started feeding both girls with calmag weeks back but the dosage wasn't not enough for Athena. Started small treatment very next day on Dec 11 (see description below) I belive got my baby back on right track. Week 9 Dec 11-17 Dec 11 Watering was planned for Tuesday but due to calcium deficiency decided for a little treatment. Watered both girls with mixture of reduced content of growth nutes by 50% calmag at 1.2 ml per ltr. Reduced solution PH to 6.2 as apperently it's ideal for calcium consumption. Over period 4h I have watered Athena with 5ltr with couple runoffs. Xena 3ltr. Total of 7-10 leaves affected mainly at top colas close to the light. Dec 12-13 Purely observation and all looking well. Of course all affected leaves will progres of showing signs but good news is that growth and development booming and don't see any new leaves with symptoms. Very nice trichomes development in recent days and more and more colours. Dec 14 Second watering for this week 6.5l Increased calmag to 1.4ml per ltr and if still things will be looking well reduce to 1 or 1.2 on next feeding. Dec 15 Very nice respond on yesterday feeding. They definitely fatten over night and getting more and more frosty. Will need to remove some foliage soon as getting extremely bushy again. Dec 17 Xenas main stem top cola almost touched the light today. Tied her to left side of the cabinet, applied selective defoliation on both girls, tied few branches to netting and on the end of this busy day a third watering for this week. 7 ltrs beetwen both. Runoffs Xena PH6.4 Athena 6.3. Very nice week have to say. I belive that calcium deficiency on Athena is no longer a case here and both girls developing very nicely. Both are still stretching, buds are gaining in size and both girls started exploding with trichomes, Thank you all again for such amazing support 🙏peace and love brothers and sisters ✌️💚💜💚💜💚 Stay tuned for new week update 😉🧑‍🌾✌️💚

16.06.2025 The Plant's had a ruff time with me recently! I lost one branch from Number 1 (the short one in the middle). And I had no Time to give them the needet attention. And I did my last Topping. So from now on it's just waiting till flower.

Week 6 looking lovely

06/02/2021 Harvest day! Quick update More to come soon! Did a quick wet defoliating, and hang dry starts! It's my last indoor run as I will be moving soon. Ps. I will still be watching everyone else having fun! Lol😀 06/29/2021 3 weeks in jar testing at July, 4th party with family and friends so final update will be after the 4th festivities.

Veg Week 6 - Holy she grew so fast in the new pot. Going to have to put it lower from the light this week. It definitely stinks if I pull any leaves. @Grove Bags, @Fishshit, @SoHumSoils, @KindwayFarms @KindwayConsultationsLLC @nutetools, @mjarsenal, @ElevatingTravel, @IntegraProducts @AyaofAfrica @WaxyBrownsFlowerPowerHour-Interactive @BowlBuddy, @cannakamp, @HoneycombHydroLLC @ChillZHQ @TheCannaCoaches, @VibesByDesignLLC @CryptoCannabisClub, @REALMetaMinds @SeattleHempfest @Buttheadz @SwadeSoul @abagaletv, @abagoldcoin, @Idonfts, @ASRG #wegrowstrongertogether #mocannacup #LFG #letsfngrow #jawwbreaker #danmccann #jawwbreakerbreath #jackterror #legaladultuse #getmoftomyourgrow #honeycombhydrollc #heropackz #nft #crypto #blockchain #metaverse #seedtheworld #greenfarmy #drugsdontmakeseeds #NFSOT

Really nice pack recived from plagron and zamnesia so first time runing zamnesia seeds really excited to try this seeds bank

Day 35-29/08/22 all looking good started to give bloom nutes today

Week 7 begins and things are finally settling after a tough pest battle. I’ve been hitting spider mites with Bioneem + Neudosan sprays regularly (lights off), and the difference is clear — far fewer webs now. Ants were crawling up stems a while back, but a dish soap rinse handled them well and I’m barely seeing any now. Bud sites are fattening up, trichomes are mostly cloudy, and the smell is classic Blue Cheese funk — sharp and sweet. Harvest Plan: Going for a split harvest: Top colas around day 63–66 (week 9), depending on trichome progress. Lower buds/popcorn will stay on for 5–7 days more for extra ripening. Trichomes: Mostly cloudy, pistils ~60% browned and starting to pull back. Feeding Notes: Still finishing up bloom feed — Ripener starts week 8. Final stretch ahead. Just managing airflow, keeping a close eye on trichomes, and prepping for flush. Let’s finish strong baby!

First time grower, criticism will be well recieved😀 Two plant ebb and flow setup in a 3x3 as a test run Top feeding until I can afford the rest of my setup🙄 Started seed in water balanced to 6.0 Sat. Feb. 29th Tap roots within 12 hours, directly into pre soaked rockwool cubes. Broke the surface march 3rd. Began 1/4 strength micro, grow, bloom and stress relief Using very hard water for the next couple days, roughly 450 PM out of the tap. Ro system to be installed march 6th Ro system now installed. Start of week 1 will be Saturday the 7th of March. Day 2: Turned the light down to roughly 50%, instead of raising it, due to the fear of light burn. Will look into it soon. Plants seem to have recovered after I decreased the light intensity. Fan and filter purchased. Alternating flush and feed cycles 12 hours apart to keep salt sats down. Day 3: Bumped light intensity back up to roughly 75% of the ts1000's capability or 700 "light units" from a cheapy 3way meter. Adding as much co2 as I can through baking soda and dilute phosphoric acid. Day 4: Exhaust fan with climate control installed March 10th Day 5: Girls exploded now that I have my salt build up figured out . Day 6: Light back up to 100% Day 7:little droopy on the one plant, gonna let them dry out a day Setup should be complete for start of week 2.(actually sick right now and having trouble getting supplies) Still need a flood table setup.

The week went again pretty uneventful, other than me not getting the tip burn under control. I have further reduced base nutrients, removed the green sensation (simply because I ran out ;)) and increased pk 13/14 further. The buds continue to develop new pistils and continue to swell. The trichomes look mostly milky at this stage, I will however wait until I have around 20%-25% amber. I have cut a bud from the lower canopy (pictures attached), which is quite solid to touch and had a wet weight of roughly 1,2 gr and is currently drying. Overall the bud structure on this plant looks amazing the buds a re super dense, nicely clustered around the stems and she looks like she'll be a joy to trim.