First set of leaves were a bit light and what appears as some decent tip burn? Bucket was running hot on week two, but left it alone. She’s happy now that she’s starting to get the munchies. Most of the growth is looking decent. I’m going to top above the fourth node, and take the lower branches leaving 6 main branches to train. She’s topped but it looks like I will end up with 8 branches to play with. I may remove the bottom two?

Vamos familia, actualizamos la quinta semana de floración de estas Frosty tooth de Seedstockers, aplicamos varios productos de Agrobeta, que son increíbles para aportar una buena alimentación a las plantas. Temperatura y humedad dentro de los rangos correctos dentro de la etapa de floración. La tierra utilizada es al mix top crop, por cambiar. De 5 ejemplares seleccioné los 3 mejores para completar el indoor y trasplanté directamente a macetas de 7 litros, el fotoperiodo a 12/12, aplique una poda de bajos, se ven bien sanas las plantas, tienen un buen color y progresan a muy buen ritmo por el momento, las plantas ya empezaron a tricomar, una locura. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨.

This they popped after 2 days of being in the soil. They’re stretching but not too much. I have a fan blowing against the wall in my 2x2 grow tent. I have the phlox on 2x4 grow light on the lowest level 18” above the plant with an avg temp of 75 & RH of 47%.

Hey folks, I'm finally back at it again. It took me a while for a couple of reasons: 1) I usually only grow in the winter. 2) I completely revamped my grow room after the issues I ran into with the last setup. 3) It took me a while to brainstorm exactly what I wanted to do. I bought these seeds from D.C. Seeds and was very pleased with the experience. I'm very happy to give business to a fellow American and Veteran. I've only ever purchased seeds from the UK in the past and that experience has been "dodgy" to say the least (not the vendors fault, but the transit). I've only ever grown photo's, but chose to go with all auto's moving forward. After calculating the intensity of my current light, with it being on a 20/4 rotation I'm very close to hitting 40 moles per day, at least directly under the light. It doesn't quite cover my 2' x 5' trellis. I'll eventually upgrade my light, but auto's should get me the best bang for my buck with this light. Also, I spent a pretty penny building this new grow room. The other obvious reason for growing auto's is their shorter seed to harvest time. I've got a small grow area, and never plan on expanding. Theoretically, auto's will allow me to produce the most out of my room. A few things about my grow room: 1) I lined the whole closet with 1/2" plywood and put that piece of ply the air intake/outtake/power as the divider between each side of the closet 2) The grow room itself has ply on all wall surfaces so I could mount stuff to it and paint it 3) The other side of the closet is my storage/prep/power distribution/etc. area. Maybe I'll take a pic one of these days 4) My last grow my carbon filter/fan was venting into the other side of the closet. This created a headache for a number of reasons. I tapped a 4" hole through the floor and am now venting into my crawl space below the house. 5) I moved to bubbleponics to speed up my grows even more. I will be removing the drip system once the roots hit the water in the res. 6) The larger res. will hopefully make my life much easier. Late in the last grow I could only fit 3 gallons of water in the bucket and that sucker was pounding down at least a gallon a day. That required too much micro-managing for me (both ph and refills). 7) I no longer have a fixed trellis with chicken wire. The trellis is held in place by dowels that I can pull out by hand. The short sides of the trellis have hinges on the bottom, so I can fold it and pull it out easy-mode. Lastly, I'll be using string for the trellis so come harvest all I have to do is cut the string instead of dealing with trying not to destroy buds pulling them through chicken wire (it takes forever). 8) I built a light diffuser on the other side of the air intake 9) My res. is on a motorcycle lift I'm using a drill to move up and down I have now started using Jack's as my primary nutes. They tell you the full break-down of each macro and micro nute, giving me more control and understanding. I think House & Garden is a good product, but when stuff goes bad it's more difficult to troubleshoot when you have no idea what each piece of their full lineup contains. I'm assuming it's kind of a proprietary type thing, which I understand, but knowledge is power. I am still using their Drip Clean (while the bubbler is going) and Roots Excelurator Silver, both excellent products. I'm still using Hydroguard, and will FOREVER. I'm a true believer now of why Hydroguard is necessary for any hydro application, IMO. I also purchased water soluble fulvic acid, but have decided not to use it for this grow....or at least while the bubbler is going (I'll elaborate below). Ok...now that all that is out of the way.... I really wanted to use my well water instead of R/O to make my life easier. Soooo....I filled up my res., and put two seeds in the system immediately. Nothing happened after 1 1/2 weeks. I finally opened up the cubes and saw that the beans had popped, but it looked like maybe I drowned them, or they ddin't grow straight up or something. For round two, I didn't change the water out, and decided to soak the beans for 24 hours in R/O water first. I had the exact same problem. I'm still not really sure what happend, but I suspect it was the well water. My PPMs were sitting at ~500 with the well water, which was probably too spicy for the beans just starting. Also, my well water is questionable (even though it's at 165ppm), but I won't elaborate further....it's a long ass story and I've spent an absurd amount of money on it. Lastly, I did put the Fulvic acid in, and it was very messy. I really want to avoid having to clean my res. Once the roots get big it will be a real pain in the ass to clean. I'm leaning towards not using the Fulvic acid this grow just to see how things go. I had 10 beans total of the Sour Apple and have already ruined 4. So here's hoping third times the charm. So, I went back to my tried and true method: 0) R/O water for everything. Ditching the well water idea. 1) Soak beans in R/O water for 24 hours 2) Paper towel method between plates on a heating mat 3) Once the roots pop, I place them pointed down in the hole of the rockwool cube 4) Hand water once a day by dipping the cube in the pre-mix of 1/4 strength Jack's and everything else I've listed above. This put my PPMs at 300...a way more reasonable value for starts. It's been exactly 7 days since I followed the above. It's probably hard to see but the cotyledons came up, and multiple roots have come out the bottom of the cubes....way faster than I've ever seen since I started growing. That means even though I'm doing my old process this already shaved at least a week off of when I'd normally put it in my bucket in the past.

The Master Kush clone from the mother plant I mess up and have not finished trimming yet. My bad got 2 jars so far. Anyway i grow these in the 2.37 liter containers as a way to hold on to a living plant once I get to test from mother plant. She grew normal size for them. I figure about 2 ounces dry maybe. I did have to wash out substrate about every other week really well to readjust ph levels. Being root bound and a hydro soil application was the struggle. Still had a great little plant. I will have a video on my YouTube channel. This won't let me upload here. I will try as usual. She only had a small corner in the Mars Hydro 3x3x6 tent. Mainly due to size of my Runtz grow. The tent, and 4 inche inline filter with smart controller worked great. Very useful piece of equipment. Oh yeah mk is super frosty and has a great smell. Thank you grow diaries community for the likes, follows, comments, and subscriptions on my YouTube channel. Happy growing everyone 🌱🌱🌱🍻

This strain has a yield of extra large, compact colas that are heavy in weight and covered in extra adhesive trichomes that stick to your fingers. Cherry Punch's exterior is dark green and exhibits small amounts of midnight purple leaves Cherry Punch's exterior is dark green and exhibits small amounts of midnight purple leaves. Its aroma is fruity but skunk-like, and has a soft, sweet berry taste that resembles its parent Purple Punch

i went to work like 2-3 days not coming home and she is nearly dry out to dead but luckily i came back in time and fix it.

Week 8 for the OG Kush and blueberry. Week 6 on the feed schedule for the Super Lemon haze. Last week of feed for the OG's and blueberry. The OG's are super thick, sticky and stank so nice! The blueberry is very sticky, smell's nice but the buds are not as big as I expected them to be.

Daily reports: Day 1. Flushing: 3x 14l plain water with 5.7-6.0 pH. Last 7 l: 5.8 pH 30 ppm => 6.3 pH 45 ppm Watering - Day: 6.0 pH 774 ppm 2.0 l => 6.6 pH 71 ppm 1.5 l Watering - Night: 6.0 pH 786 ppm 1.5 l => 6.4 pH 115 ppm 0.55 l Day 2. Watering - Morning: 6.0 pH 861 ppm 1.5 l => 6.45 pH 149 ppm 0.8 l Watering - Night: 6.0 pH (848 ppm 1.5 l + 797 ppm 0.7 l) => 6.1 pH 329 ppm 0.25 l Day 3. Watering - Morning: 6.0 pH 699 ppm 2.0 l => 5.7 pH 740 ppm 0.8 l Watering - Night: 5.7 pH 569 ppm 3.0 l => 5.8 pH 1000 ppm 0.8 l Notes: Yesterday I broke dropping irrigation system, so today I showered Heracles as usual. It seems that dropping irrigation made less runoff. And here we are again, 2 times ppm in runoff. I think I just can't fix that, so I will finish this grow as is and try to change fertilisers for the next grow. Day 4. Watering - Morning: 5.8 pH 334 ppm 2.0 l => 5.8 pH 1050 ppm 0.8 l Watering - Night: 5.8 pH 435 ppm 3.0 l => 5.8 pH 1570 ppm 0.6 l Day 5. Watering - Morning: 5.8 pH 323 ppm 2.0 l => 5.8 pH 1220 ppm 1.0 l Watering - Night: 5.8 pH 333 ppm 2.0 l => 5.8 pH 1220 ppm 0.7 l Day 6. Watering - Morning: 5.8 pH 344 ppm 1.5 l => 5.8 pH 1190 ppm 0.25 l Watering - Night: 5.8 pH 344 ppm 2.0 l => 6.0 pH 1120 ppm 0.25 l Day 7. Watering - Morning: 5.8 pH 356 ppm 2.0 l => 5.8 pH 1020 ppm 1.0 l Watering - Night: 5.8 pH 337 ppm 2.0 l => 5.9 pH 807 ppm 0.5 l

Smelling amazing

Top speed

The germination i forgot to take pictures so i just have a video of the first 3 strains i started before the other seeds arrived. I used the same metod for all of them 24h in the glass of water after that 48h in the cotton pads in the zip lock bag with 3 sprays of water on the cotton pads and 1 spray when inside the zip lock bag is closed untill 80% leaving a small gap for them to breath. I decided to plant them after that in the final resting pot for this strain in a 5 gallon fabric pot. I used the following media on the bottom of the fabric pot i used 10% of Goldlabel HydroCorn after filled up with Advanced Nutrients coco cultivator (50% coco 30% perelite 20% pebbles) and i mixed on the media some Azos , Mykos and Great White. The light schedule for the first 5 days was 24/0 and after that i change for 18/06 schedule. Just water the plants on the 15/06 i think all my seedlings are stuned because my light is too strong for them and the light is dimed to 25% waiting on my new seedling light the Spider Farmer SF1000EVO LED should arrive just on wednesday. And my light meter for lux is saying i have 8600Lux converted is 148 and my dli on meter from the phone is saying 150 so its 3x times more the recomended i just dont understand if this phone app is working correctly. Update on the order from spider farmer from Ebay (Order the item on a thursday and the order was not updated on ebay on the following Monday so decided to contact them to understand when i am gonna receive my order i was told true ebay that my item as been shipped and i will receive an update within 1 hour to tell what time the item will be delivered. So never received any message giving my time slot delivery. Never received the item and at 21pm the tracking updeted on Ebay saying delivered so i contected them next day to be told that the courrier actually lost my order and that they will reshippe the order again but was told i need to wait 2 buiness days for the warehouse to processe my order beacuse they are busy what i replied that why should be me the costumer that needs to wait 5 or 6 more days for the order to arrive to me that they should send me the item on the same day and send me with one day delivery. The ansewer was they could not do it so i cancell the order asked for a refund and never more use their products appailing costumer service)

🍼Greenhouse Feeding BioGrow & Bio Bloom 🌱GARDEN OF GREEN SEEDS ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ by VIPARSPECTRA (models: P2000 & XS 2000)

Wormcasting tea diluted and fed at the start of every second day (was previously added after every flush) Im aware I dont want too much nitrogen this late in flower, I compensated by lowering the dose of B1 which is high in nitrogen. Explosive results. Highly recommend reading about the benefits 👌 Ran my microscope over the canopy quickly and noticed about 60-70% milky with the odd amber here and there so we're a ways off yet. My plan for harvest is to flush her hard to pull on the brakes, just water for a few days reducing amount each time then lights out for 3 days prior to chop.

Hello everyone week 4 of flower has passed for this Cinderella Jack auto 👸🏼 For the feeding schedule i stopped feeding Power Roots and Pure Zym and started feeding Green Sensation 0,5/l Mars hydro SP-6500 power 75% have a great day and wish you all happy growing 😎👨‍🌾🏻

Day 65 - Pics/Vids..... Everything looks good......stress bent them into position and defoliated ..... lots of flowering now..... ..... hadn't actually measured them for awhile, and updated the height, 44 cm .... tested out the lights higher, 40cm away, and seemed to slow down growth... so moved em back, 20-25cm... watering is the same, bottom saucer feeding, 850-1000 ppm dutch master one flower 5-8ml/lt.... actually using about 12-15ml / 1.8l....... Day 70 (10 wks) - Pulled em both out of tent, flushed em and trimmed em abit, took some pics/vids in the sunshine. ...... the soil started smelling bad, - stale, moldy, damp, soil smell..... so i did a full flush out on both.... noticed afew gnats, been afew since the start, but haven't really been many.... i'm going to try out a UV bulb, and also a usb uv led bug trap ..... just ordered them.... posted a pic of both... see if they are any good..... 😎

Day 100 | 03/04/2022:💧 I am back from my holiday today but I will only be able to harvest them at the end of the week, so I watered them today. but with a reduced 1L each because I still want them to be more on the dry side when I am taking them off Day 105 | 08/04/2022: Today was harvest day and the girls look sooooo dry and yellow omg.. 😅 Maybe that 1L was not enough, but still it's better that they are on the dry side. They just all went so yellow in the last few weeks, obviously they werent getting any nutrients but also I harvested them a bit late

Such an amazing flower, really great especially a phenomenal hash producer yall will be super satisfied with this one!! She’s a shorty but Make sure you top 4 to 6 times or even more to have all them gooey bud producing heads , Dirtyblonde is absolutely an amazing plant!!