09/07 - Reveg still in process - Mother plant in recover from clone clipping - unhealthy clones disposed - cutting new clones this week - Myco and Superthrive feed increased - Net dropped an LST. 09/10 - Mother reset in motion - clones are healthy and rooting effectively - humidity 89% at 18 hrs.

Ci siamo quasi cosa ne pensate ?

Huhu 👋🏻 Neue Woche neues Glück…. - Den Befeuchter befülle ich alle 2 Tage neu, wichtig ist! (Immer mit destilliertem Wasser) - Ende der Woche habe ich dann umgetopft, sodass die Wurzeln noch genug Zeit haben sich auszubilden. Tag 22 : - Die Pflanze sieht sehr vital aus und hat ihre Größe so langsam erreicht, sodass ich die Pflanze toppen kann. - zusätzlich habe ich die „Keimblätter“ entfernt. Tag 23 : - gegossen mit 250ml (Düngermischung) Tag 24 : - kurz bevor es dunkel wird einmal IPW angewendet (2,5ml auf 1 Liter)

Week 6 today of flower. Still got couple weeks, gaining ok was hoping for alittle more growth but still time. Loads of thc popin. Updates to follow

Stretch 12 centimètres Jour52 légère defolliation et arrosage avec deux litres d'eau PH 6.3

The first week of flowering is here, and things are finally looking much better! Both plants have recovered well and are now growing much healthier.🌱 #1 has already started stretching significantly, really picking up speed. It’s exciting to see how quickly it’s developing! Meanwhile. #2 spent about half the week still in vegetation, but towards the end, I finally spotted the first signs of flowering. Now that both are officially in bloom, I’m looking forward to seeing how they continue to develop over the next weeks. On to the next phase! 😊

Week 2 of flower 👍🏾

The plants react well to pk 13/14 !! We are in the seventh week and the flowers begin to grow !! The plants have very long sonnets and have on average 10 12 plantations!

7/11- Second official week of flower is here. I gave her about a quart of water today. Not much else to report. she's doing well! 7/12- I've done nothing to her today. She's still looking great! 7/13- I gave her about a half gallon of water today after I found burned tips on my leaves. Anyone reading this willing to confirm if this is nutrient burn? I'm sure it is, and I'm wondering if I should even feed before I defoliate on the 17th. This might change but as of right now I might only feed bloom nutes when I defoliate. Took her out of the wardrobe a few hours after watering which is why the leaves look depressed. Seems she always slumps with a heavy water. But I was able to get a better look at her flowers, and OH MY GOD. I cant believe how beautiful these neon purple buds are! 7/14- Today I found yellowing leaves on the bottom and they just kind of popped off with a gentle touch. This kind of spooked me. I landed on the conclusion that they probably weren't getting enough light and the plant started taking the nutrients out of those leaves. So I decided to defoliate today. I don't want the lower leaves to fall off cause they aren't getting light. I want those lower bud sites to develop too, so I cut the leaves that were blocking the most light into the plant, allowing the plant to get some energy down lower. I didn't get too crazy but I did remove a good amount. I will likely continue to prune leaves over the next few days but its mostly gonna remain natural growth from this point on. 7/15- Watered a quart this morning. Seems like she's really drinking a lot. The buds are starting to get fat. The buds are really pink! 7/16- God drunk last night and turned the light down to take pictures of the bud.... My dumbass never turned it back up. So today about midway though its day cycle I noticed and turned it back up. 7/17- Some leaves are yellowing. I think its a K deficiency. I cant feed today, soil is still too wet. Will probably feed tomorrow.

New week new updates smell is strong,they look great and in the best shape, even if they are growing slow a bit I don't mind it. As long they look healthy. Ghe rippin time.

Autos are growing slower than I hoped, but it doesnt matter, lots of time for them to finish before the unrooted clones hit the 12/12 flip Low humidity causing me to foliar spray the bigger plants daily. Clones looking good, mothers in veg looking good, all is good

The temperatures, humidity, height, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil spread evenly across the top of the soil. Daylight hours this week will be below 13.5. I can't use halves in the grow conditions, so I'm noting here. Day 1 we had a high temperature of 90°F. Skies were sunny and it wasn't as humid as it's been. I watered about 5 gallons per pot ,once, from the well. Day 2 we had a high temperature of 83° F with partly cloudy skies. I watered each pot about 5 gallons once. I treated twice with Growers Ally fungicide. Day 3 we had a high temperature of 81°F. There was plenty of sun and I watered about 5 gallons per pot. Even though the girls are drinking more the cool weather and them rooting into the soil through the fabric pots has kept me from watering twice a day. The girls cleaned up nice after the fungicide treatment. They look great. Day 4 we had a high temperature of 78°F. Skies were clear and sunny. I watered about 5 gallons per pot with well water. The air has been a little drier with this cool from and the girls are loving it. Day 5 we had a high temperature of 77°, clear sunny skies, and humidity at 66%. This weather is very fall like and the plants are loving it. We've got rain in the weekend forecast though. I hope we miss it. Day 6 we had a high temperature of 77°. Skies were partly cloudy to mostly sunny. The humidity dropped into the 40%'s today. The plants are loving this weather. I watered about 5 gallons of well water. These girls are starting to smell like lemon cleaner with a sweet note. Day 7 we had a high temperature of 86°F. Skies were partly cloudy and we had just a few minutes of very lite rain. I watered about 5 gallons per pot with well water. This week was a success. The powdery mildew is an ongoing issue but it's controlled by spraying weekly with Growers Ally fungicide. The weekly rain is what's making it so troublesome. These girls have slowed their stretch and seem to be leveling off. They are smelling like lemon cleaner, with a sweet note. Daylight hours finished up the week at 13 hours and 20 minutes.

Day 63 Chopped em down trimmed off all fan leaves and hung em whole plant in closet thay stays around 58% RH and 69°F

Semana 11: 24dezembro-30 dezembro Esta semana tive um problema com o temporizador e as plantas ficaram 8h a mais às escuras, mas o problema maior tem sido a humidade alta nestes dias. Parece que a 🦍 está quase pronta para ser colhida. Bom ano para todos.

Day 14 of flower and all 4 plants have stretched over a foot in the last week. Should start putting all of their energy into flowering now. Looking really good so far. Really, really good.

An amazing week for these beauties. At the start of week two they began forming really well, and by the end there was stacking and great nug production happening. They are filling out so well. Some of the tops were over achievers and got too lanky to manage, so I tucked as I could to manage them without damaging, but they still took off. I typically tuck and bend for the first week, then go hands off till week 3 with a defoliation, but with the bud production happening so quickly it became difficult and I didn’t want to risk snapping anything off and stressing the plant out. Temps have been consistent, around 80 degrees and 58 % RH. I’ve been checking daily for and pests or problems and haven’t had anything pop up. Also checking for signs of stress or ball/sack hermie production, but all signs say they are happy and healthy. Happy Gardening 🇨🇦👊❤️

She was a very easy strain to grow and took very well to all LST. I did have an issue early on where I snapped her main stem almost completely off. I used some plumbers tape to keep her together and she recovered like nothing even happened to her. Definitely recommend growing this girl, especially beginners.

01.12 - Stretch has stopped, so I decided to change my nutrient plan and also lollipopped all of the girls during the week when I watered them. They develop really well and I look forward to see the buds growing.

I'll be using the 5x5 for my photoperiods Everything is starting to pop out of the soil now. Waiting on 2 more to pop out and that will be all of them🤞👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 CHECK OUT MY OTHER DIARIES TO SEE WHAT BREEDERS AND STRAINS I AM GROWING👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Blooming nicely