The Grow Awards 2026 🏆
Likes
Comments
Share
Hey growmies, It looks like she has recovered, and didn't enter flower. Signs of strong genetics right there. I covered my hydroton to prevent algae, it works great. I'm not sure if I can clone this one, her first weeks of life she was too focused on recovery, as a result the plant is a little stunted for its age, but I will re-assess next week, as she looks fine now. Just not sure how much time I have before flower. Stay safe, warm and high. It's rough out there. My equipment is mainly by Mars Hydro, I bought them with my own hard earned money, if you are interested in buying one of their lights or tents and would like a small discount and help me out, check out the link below ! https://marshydro.eu/?ref=belgianbudtender Coupon code belgianbudtender
Likes
2
Share
cut on the 41st day from the first flower. it resisted 99% humidity without water or light for a week. it went into overfertilization 3 times up to 2.8 of ec the plant reacts great above this data the plant stops. I used Biobizz organic products not following the table. The plant was never drained until harvesting, by watering with little water and rich in salts the run off was 8.4 brought to 1.9 as the final harvesting figure. the plant smells like big babol, smoking it fresh incense flavor hits the nose like monk and strawberry candies
Likes
31
Share
@Reaper
Follow
Last time im growing this INDOORS. plant is waaay too big for my tent, she finaly is flowering now and ill have to keep pushing her under the net because it cannot go any closer to these leds.
Likes
34
Share
@ertaverd
Follow
Tuve plagas de Araña roja y de Mosca blanca, he fumigado 2 veces y parece que esta solucionado. Los cortes Apical y FIM van creciendo correctamente.
Likes
60
Share
@m0use
Follow
Nothing to exciting this week, plants are doing well. Little bit of stretching going on and starting to smell more and more now. The newer growth is a bit lighter in shades of green then the old stuff. I think this is from me dividing the flowering nutrients into 4 weeks vs all at once as they tend to get a bit of N tox when I give it all at once so this seems to be doing better. Clones are same old, just waiting for the weather to get nice. Found out that when I use Insect Frass as a fertilizer it's also adding in chitin "a protein found in bugs, crustaceans and fungi" to the soil, when that stuff breaks down it makes chitosan and that can help boost defences against pests and virus in the plant. There are plant additives out their that are pure chitosan in varying concentrations and they use this to make the buds extra frosty. To much can harm the plant though. I also found out I needed to water them a bit more then normal not that the stretch is happening. so they got 6L this week each vs the regular 4L but it was split up in 3 days. In the first bit they got all the additives i normally do and the other bit was just PH'd water, didn't want to over load em. Big shoutout to Medic Grow for sponsoring the lighting in my tent, They have provided me with 2x Mini Sun 2's in the 240w configuration, They use the v1 growing spectrum that is a all purpose seed to harvest spectrum so their is no hassle of switching it mid grow. If you're interested in learning more about Medic Grow products please visit the web link below. https://medicgrow.com/ https://growdiaries.com/grower/MedicGrowLED
Likes
5
Share
@MMorrelo
Follow
finally have some time for my plants. i will upload some photos and videos this week! ------------- updated again i spotted male flower on one of the branches removed it immediately (it was immature), after removal i peeled it in other room with gloves and was sure it was 100% male flower because it was not like calyx inside. its the 2nd time i find male flower on plant number 1, very strange i never saw plant only popping one random male flower. i thought plant would just be hermie and it would have a lot of male flowers. the plant is 100% female but popped random male flower again. It is late flower of this strain and i think i can handle this problem and finish that plant. Any expert ideas? any of readers encountered this problem? p.s. sorry for bad english, it is not my native.
Likes
17
Share
Welcome growfessors to another episode of growfessor theatre! Week 2F begins for the 10 ladies in the 4X8 tent. Did a little defoliation on them, mostly removing dead/dying leaves. Added big bud coco to the feed mix, the ladies look happy and healthy! No up close pictures this week, not much to show yet. Thanks for stopping by, tune in next week! 👽🌳💚
Likes
120
Share
Hey there, my fellow ninja enthusiasts! Week 12 in our Tropical Tangie Ninja Run has been a wild ride, packed with thrilling developments and a few climate surprises. Let's dive in – this week, the temperature decided to crank up to a sizzling 32°C! As the guardian of my Tangie, I had to spring into action. To maintain a comfortable environment for her, I cranked up the humidity to a cozy 75%. Why, you ask? Well, it's all about VPD – Vapor Pressure Deficit. This fancy term essentially means we're striving to keep the air conditions as close as possible to the optimal range for plant health. Think of it as creating a ninja-approved climate! Now, let's talk trichomes. Oh boy, the trichome production this week has been off the charts! These little resin factories are working overtime, and the results are nothing short of mesmerizing. The numbers are outstanding, and the formation is simply beautiful. Our Tangie is turning into a trichome queen! But that's not all. This week, I've been all about that Zen garden vibe. I've been zenning out and sharing my herbal medicine not only with my plant but also with my ninja buddies. It's like a little garden party with a side of relaxation. Now, onto the numbers game – I raised the TDS (Total Dissolved Solids) to 400 and bumped up the pH to 6.3. Why, you ask? Well, it's all about fine-tuning the nutrient solution. These adjustments ensure our Tangie gets the right balance of nutrients, promoting optimal growth and flowering. It's like giving her a customized meal plan for maximum ninja power! So there you have it – a blast of a week in the world of our Tropical Tangie Ninja Run. As always, I'm here, sharing the journey with you all. Stay tuned for more ninja updates, and remember, every twist and turn in this adventure is a testament to our dedication and love for the art of cultivation. Keep the ninja spirit alive, my leafy warriors! As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and blessed with you all in my life<3 <3 <3 #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #dutchpassion #dogdoctorofficial #legoninjago #growerslove 
 With true love comes happiness <3 <3 <3 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3 <3 <3 Friendly reminder all you see here is pure research and for educational purposes only <3 <3 <3 Growers Love To you All <3 <3 <3 P:S- GD is not allowing videos uploads, i will upload t hem asap, growers love you all and stay tuned its a fun one i think <3 <3 <3
Likes
26
Share
@GrowGuy97
Follow
Day 35, start of week 2 in flower, everything is going great so far✌️🏼🌱 Day 37 - All the ladies are looking great✌️🏼🌱 Day 38 - ladies got watered today, looking good & starting to put off a nice smell😍 Day 40 - Still have a lot of yellowing leaves towards the bottom of almost all the plants can’t figure out exactly what’s wrong😅😅
Processing
Likes
13
Share
@neuraxis
Follow
The last week of vegetative state. Some of those are pretty dense, they look like salad. Maybe adding a bit of blue to this 80 CRI LED is a good idea to get a bit more elongation. Work a lot on LST tonight. I'm trying to make some clone with a technique I've seen long time ago. I put the cube directly on the plant. I remove the skin surface of the branch before putting the rockwool cube around . All cube are wrap in plastic to avoid excessive drying. No hormones. I will wait one week before cutting those clone out of the plant( thats my dead line before flowering). They all receive 200ml of PH 6.5 water this morninig and 200 more this afternoon. Next watering in the morning tomorrow, Working on ESP32 wifi based co2 meter for controling co2 level in the next grow. =============== 2020-05-26 =============== Everybody receive 300ml of ajusted 6.5 water. Adjusting LST and adding some defoliation. Watering clone/cube with 5.5 ajusted water with blunt top a seringue. ========= 2020-05-27 ========= Trying to water 3X day the clone/cube with 5.5 ajusted water with blunt top a seringue Everybody have received 125ml in the morning. Worked on the low cost wifi Surge protector 6 space smartbar. 15AMP@120v https://mygeeni.com/products/geeni-gn-sw003-199-surge-smart-protector-white/ Found a way to get rig of the cheap stock firmware. Flash it with a alternative firmware(tasmota) using wifi/without any opening/soldering. Those are pettry nice , timer capable, you can remotly control and monitor them After setup you can acces the bar using the small web interface or via a MQTT server and home automation software. I've posted a image of the result for those 2 examples. So im thinking to turn this into a tutotial to help grower to acces flexible technology and software at resonable price. You can comment to signify your interest in this! =================== 05-29 ================== Everybody back on water until monday/switch to flowering. Added some tutor for the next stage. Moved the cam for top view I cleanup/defoliate the bottom of each plant.
Likes
64
Share
@Wastent91
Follow
Scusate il ritardo ragazzi ma purtroppo ultimamente nn riesco a stare dietro a tutti i progetti, apparte questo questa settimana sta andando tutto per il meglio, la ragazza è un esplosione di vitalità, ho provveduto a fare topping della cima principale e di tutti i rami più bassi, poi ho legato le cime per farle andare più latelaralmemte, poi volevo fare la stessa cosa con le due cime principali, ma stupidamente ho tirato troppo e nel mezzo di è spezzata leggermente, però per fortuna per ora nn ho avuto problemi e spero che la ferita che ho provocato involontariamente, si rimargini senza dare particolari problemi futuri alla struttura della pianta, vedremo se adottore dei tutori per quei due rami oppure che si irrobustiscano da soli.. Per il resto i nutrienti stanno facendo il loro dovere e la pianta è in ottima salute quindi non posso che essere più che felice per come stanno andando le cose! Grazie come sempre a Mars hydro per la nuova spettacolare luce, che sono sicuro farà la differenza insieme ai nutrienti professionali di cui dispongo! Grazie mille a tutti voi che mi seguite un buon 420 a tutti!
Likes
29
Share
@Suemchen
Follow
Sanlight evo at 100% Day 64: watered today with supplements. Getting high humidity levels, so I sprayed purolyt. Will propably flush in a couple of days. Day 68: flushed yesterday. One week now and then 72 hours of darkness. She is starting to fox tail... Other than that: Looks and smells really good🤙 Get 15% Off Fast Buds with Code: FBSUMO https://2fast4buds.com/
Likes
3
Share
Processing
Likes
4
Share
Sorry for the delayed post I honestly forgot I started this one lol...they’re doing great I had some of those biodegradable starter pots that I used n prolly let them stay in too long tbh but now they’re both in their new homes! One is all coco and the other is top-half coco/bottom-half soil..thanks for reading/looking
Likes
11
Share
Sharing pictures of this small plant I have in rotation Freebie from NorthAtlanticSeedCo, Purple gelato x Unicorn poop Build a Soil Organic perpetual grow
Likes
6
Share
@Trrip
Follow
I have a plant with a tobacco virus but zero problems. continue :)
Likes
16
Share
@Chucky324
Follow
Hello. this is the end of week 7 and the beginning of week 8 of veg. What good luck... I've got 7 females and 1 good male out of 9 plants. I killed 1 male and 1 seed didn't pop. Things are going well... The last undecided plant turned out to be a female. So I'm already to repot them and put them in the tent. I've got a 5x5 tent with a Spider Farmer Light, SF4000 in there. I think I'll have to get more soilless soil. I use Sunshine Mix #4. I usually get 4 bales to get me through a year. Lots of big spiders in my yard this year. The bees are sure taking a beating though. I haven't seen one in days. No wasps or mosquitos too. Hope your enjoying the comics. Have Fun. Chuck.