Likes
Comments
Share
End of 5 week of flowering. All three full of resin.buds are very sticky.. nice smell from closet.we will see in the end. 3 weeks till flashing my plants i think.
Likes
13
Share
@gr3g4l
Follow
Aunque dejaron de crecer a lo bestia como lo hicieron en preflora, 25-30 primeros dias a 12/12h. han seguido creciendo hasta ahora y esta semana me tocó volver a calzarlas todas para que estubieran a una misma altura. Esta semana viene bién cargadita de nutrientes con tres riegos , dos o tres dias entre uno y otro, según veo o creo que lo necesitan. Seguiré regando mitad mitad, agua de grifo / destilada . El primer riego de la semana 3 ml/L de top Candy y un pelin de ácido cítrico para bajar el PH. EC 1,03 , PH 7,00 El segundo riego con Bud y Bloom, 1,5ml/L y 3ml/L respectivamente más ácido cítrico para bajar PH. EC 1,30, PH 6,9 El tercero con Delta9 y callMag. 4ml/L. y 0,5ml/L respectivamente más ácido cítrico para baja PH. última poda de hojas abanico, 2 o 4 de cada y poda de yemas para que no compitan con los apicales que reciben luz. También me tocó fijar mejor los troncos con alhambre de jardineria para que estos no se doblen por el peso y pierdan por aquí algo de energia. No tengo claro si fuí capaz de disminuir el exceso de nutrientes por lo que durante toda esta semana y hasta final de flforación se mantiene una EC baja. mezclando mitad agua del grifo mitad destilada y así consigo mantener esa EC . El haber regado en crecimiento y principio de flora con un agua tan dura y alcalina hizo que las plantas muestren el aspecto que muestran
Likes
21
Share
@Kirikiri
Follow
Diese Woche habe ich wieder eine defo gemacht und die Pflanzen weiter trainiert. Denke bis Ende der zweiten Woche ist der Stretch zu Ende. Ab dem nächsten Wasserwechsel gibt es PK 1314 dazu. Die Pflanzen verbrauchen Wasser und Dünger im gleichen Maß. Was ein gutes Zeichen ist. Der per EC Wert bleibt konstant, so
Likes
38
Share
@Chucky324
Follow
Hello This is the end of week 2 and the beginning of week 3 of flowering, for the 6 plants in the greenhouse. This is the end of week 1 and the beginning of week 2 of flowering, for the 3 plants inside. Things are going good in here this week. I want to get in here this week and do my last trim/prune before the resin starts flowing. The Voodoo Plant opened this week. It smells like rotten stuff so the flies pollenate it. It's only a 4 day flower before it goes bad. I showed some of the sweat shirts and t-shirts I put image's on, with a ink jet printer and some iron on transfer paper. Are you a pot/cannabis activist too. Make your own shirts with the images "you" want on them. Ok. Wishing you the Best Wishes. Be Great. Chuck
Likes
2
Share
Stop feeding flush and plain water feeds only
Likes
Comments
Share
Likes
14
Share
Sowed two beans after 24 hrs soak into rooting pods on the 2may21. Sprouted on the 5th, placed in dwc on the 7th. GH ROOTBOOST, 19/5, PH 6.0, PPM 150-200. Temp 29-31degs.
Likes
7
Share
What a crazy few weeks ! Got all settled in with the current madness going on in the world. The plants are flowering big time and have a really nice smell. @MarsHydro really put together a good light with the SP250 model and the plants have loved them the whole grow. No trimming this week, just a little foliar feeding when I get to pop by and check them. Feeding is still basically the suggest on the general hydroponic charts. Happy growing and thanks for checking my grow out
Likes
21
Share
@NewMan
Follow
Není na co čekat, terpeny mluví za vše. Dneska jsou na řadě první dvě krásky, tu poslední nechám ještě týden dozrát. Poslední zálivka byla ec 1.8 , ph 6.2h , základ Athéna + Green Sensation od Plagronu. Světlo na max až dokonce , vlhkost 60%. Všechno to hezky dozrálo a za mě jsem s tím spokojen.
Likes
60
Share
I have to thank @Kannabia and @GreenBuzzNutrients for supporting this crop with their premium produce. No doubt these guys do a great job. Specifically, this crop was fast and quite stable. To get its full potential I would use automatic irrigation or hydroponic cultivation. I would also make sure the stems have enough support to support their heavy buds. This is quite a monster in the making!
Processing
Likes
21
Share
Logan's Run is up and running. She received her first worm casting tea yesterday. She is praying today and tomorrow she will begin getting Bloom. I should have taken some of her secondaries per the guide, but they were long and flowering by the time I could tie her down. They have stood, and I think I will get a inner ring of secondaries for my trouble. She is is doing great. I have had a slight gnat problem, but I have gotten it under control with DE. Just put it in a lid, and left it near the plants. Cleaned the tent, and both girls are doing good. Happy farming, see ya next week.
Likes
12
Share
So just finished week 8 and starting 9 (from sprout), i still see new white hairs and the buds although they are getting there i think still need 1-2 weeks at least whats your opinion ?
Likes
6
Share
@Theia
Follow
Decided to chop her as there was some crazy foxtailing and I wanted her to be dry and have had a few days cure so I can try it on Christmas day. Well that's the plan anyway .😜 She weighed in at 630g wet but that's arbitrary as that's all the stems also. The buds are all dense and very fragrant. Thick trichomes that left the cutters thick in resin after the wet trim.. They are hanging now at 16c and 49%. Back later to report on them..
Processing
Likes
26
Share
De nuevo, actualizamos la séptima semana de floración y es que estas skunk están preciosas, es una Indica muy conocida y típica entre nosotros los cultivadores, muy sencilla de cultivar. El ph, la humedad y la temperatura son correctos, zambezaseeds está haciendo muy buen trabajo con sus variedades gente, os lo aseguro que ya son varios los cultivos con ellos. Hasta la semana que viene.
Likes
58
Share
🗓️Day 107 🗓️Day 67 Flower 16/08/24 Saturday The time is NOW 😋😁👏🎉💚
Likes
3
Share
@CalGonJim
Follow
8/10 Monday. 12:05AM FULL RETARD MODE ACTIVATED 8/10 MOnday - looking good needs water will ask Grok: For your Fast Buds autos (RF3s + Mendo Frost) at roughly week 5 in coco, target an incoming EC of about 1.2–1.6 mS/cm (roughly 600–800 ppm on the 500 scale). 8/11 4:30am 550 PPFD is solid for where those plants appear to be. Looking at the photo, you’ve got a clean, well-organized Spider Farmer tent with healthy-looking plants in fabric pots (plus the smaller one in the white pot). At 45 W per light (90 W total) and hitting ~550 µmol/m²/s, the efficiency is actually pretty good — modern diodes can deliver that intensity when the lights are relatively close and the footprint isn’t oversized. Quick context for that PPFD • Current stage (looks like mid-to-late veg on most of them): 450–650 is a strong sweet spot. You’re right in the middle. • You can push a bit higher (600–700+) if you want denser branching and tighter internodes, but 550 is already productive and lower-stress. • Once you flip to flower you’ll generally want to climb toward 700–900+ (depending on how the plants respond and whether you add CO₂). A few practical notes • Height & uniformity: At only 90 W total, the distance from the canopy is doing a lot of the work. If the outer edges or lower plants are noticeably dimmer, you may need a slight height adjustment or to rotate pots so everything stays even. • Heat: 76 °F and 48 % RH is comfortable. With only 90 W you’re not fighting heat. • Dimming headroom. The plants look happy — good color, no obvious light stress or stretch. You’re in a good place. If you want to share the exact model of the lights or the tent size, I can give more specific height/PPFD targets. 8/11 2:29PM these lights are so efficient and so good that I had to turn the electricity back each light is now down to about 40 W each so 80 instead of 90 Ish. I didn’t check the PPFD rating so I don’t know what the light measurements actually are, but I know keeping them at 40 each so a total of 80 W is very good. I raised the lights out there about 12 inches maybe a little bit more about 14 inches high off the top of the plant but doing good so far my EC was 1004 on whatever scale that is I’m using from 900 to 1.2 is what was recommended for EC. 8/ 10:48 AM I don’t really remember how to use those art supplies but my plants are starting to look nice and bonsai. One of them will be shaped like a snake. It’s gonna look really good and self supporting. The other ones are pretty good. These are gonna be a nice decorative grow. I should get a lot out of them too starting to flower fast buds always has the greatest staff. I mean there their plants are always the best. They respond so well to everything, especially all my mistakes they always recover. 8/13 12:47AM The two that are a touch pale are probably the ones you’re noticing. In coco that’s usually one of three things: Mild nitrogen hunger (common once they start really taking off) Cal-Mag demand ramping up (especially under LED) Or just the natural variation between the RF3 and the Mendo Frost phenotypes A light Cal-Mag bump or a small nitrogen nudge is the smart move. Don’t jump on it hard — just enough to bring the color back without pushing them into dark green and locking out other things. You’re already dialed in enough that a gentle correction should fix it quick. 👻👽 Your light setup is the real story though. Running two Mars Hydro TS1000s at ~40 W each instead of one at 80–90 W is a classic low-heat efficiency play. Same total photons, way better distribution, and almost zero heat load. That’s why you’re getting this kind of growth with almost no thermal stress. The plants are loving the gentle, even intensity. Dropping from 45 W to 40 W each was the right call — 45 was just enough to start pushing them. 👻👽
Likes
12
Share
Aug 22: she is flowering strongly and starting to smell. Still using the 730 nm far red light at dusk (Civil Twilight at timeanddate.com for my latitude) which gets a few minutes earlier each night. Between the red light bloom booster, force flowering starting in July, the UV lights, and these Plagron nutrients, the flowers are developing fast and thick on all the plants. So far so good. Aug 27: have had great weather this week. Also had the UV lights going at least during midday. AC Infinity UV lights are for indoor use but they are usable outdoor if you ignore their lawyer’s warning.
Likes
1
Share