Likes
Comments
Share
@GYOweed
Follow
Growing great. Killer roots. Did a fim job frw days before. Trimmed the roots too. Removed most fan leaves beautiful as they were. Smells amazing grape cake stem rub. Gonna use mycos and transplant after healing today, this one earned it.
Likes
31
Share
We back with some buckets! Time to fire up the pumps and get this show on the road. If you haven't seen sugar cane then you need to crawl out from under the rock you're hiding in. Soaked this beautiful little gem of a bean in some water until it cracked then threw it into the bucket with 100% perlite. Started them on a low dose of maxigro on day 3. Doing these diy Dutch Bucket style as always. Going to be running 8 in house genetics strains on the system with constant 24 hour a day irrigation. Not much exciting going on yet, but with a little luck that may change pretty soon.
Processing
Likes
13
Share
@kevgrow
Follow
Hey Friends, end of week 8 from seed :) Many new things have occurred this week Plant 1 is beginning to mature, its not growing in height as much as before but now its getting thicker and looking stronger. I am slowing increasing the amount of nutrition, I don't want to burn them at this stage. I noticed some of the leaf stems were turning red, so I decreased the light and its turning back to green. Did some defoliation this week to give more room to the smaller leaves. Plant was getting taller and was too close to the grow Light so I installed some netting inside the tent and it helped control the height for now, if it gets taller ill purchase a bigger grow tent 😩 Looking forward in seeing some bud formation in week 9, will keep you guys posted. Thanks for all the support, see you guys next week! #FirstGrow #Plant#1 #MysteryStrain
Likes
7
Share
@Soskar69
Follow
This baby is going good, thricoms production and smell on point👌 The main cola is growing very big, I'm so hyped about it 😝 Some of the leaves are becoming yellow and i saw some signs od deficiency of some sort but I'm not worried because she is near the harvest, I think another 2 weeks and I'll chop it: Sorry for the low quality of the photos, next time I'm gonna use a better camera.
Likes
18
Share
@xtchill
Follow
Hey guys. Managed to get some pics. Going to check the trichomes later to see where they are at. Cant explain the smell its giving off
Processing
Likes
12
Share
@DD1FORTY8
Follow
**** WEEK 10 **** both hulks shaping up to be some real beasts. just can’t beat good ol sunlight
Likes
4
Share
Day 78 Update: Start of week 12! Watered plant with almost a gallon of pH balanced water until runoff. 4 days left of flushing on Plant #2. Going to play it day by day till harvest, depending on how this week's plans unfold. Day 82 Update: Harvesting Plant #2 today. I will update the harvest part of the diary once I place these buds in jars. See you in a few days!
Likes
22
Share
@Mastr
Follow
Hi this week full strees for lady's I just top them from 4th node and done first lst for lower branches to get light this week I feed 1ml silica 1ml root powers 3ml grow 1ml heaven Every 3days or 2 I give her 1L mixed nuts Day 19 1plant is preflowering and from last node start fade purple this one definitely dark purple same last time 😍
Processing
Likes
10
Share
@Stanp
Follow
This week i will start the LST for the Fruit Spirit. She recovered amazing after the topping last week. I’ve added more chamomile flowers and egg shells to the soil as a natural fertiliser. I also use twice a week the 7-7-7 All Purpose for the Fruit Spirit and the Blue Cheese. I use 2 LED white lights, 1 Blue Fluorescent Tube and Pink Fluorescent tube. For water i buy mineral water from the store with 5.5PH and the soil is roughly 5.7 PH.
Likes
3
Share
@Joaka
Follow
no se si sera normal pero se siente poco olor aun, esperemos que con el tiempo incremente su olorsh
Likes
3
Share
@CalGonJim
Follow
4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3.
Processing
Likes
113
Share
@Skunky
Follow
Update from last week that I forgot: I gave her a final feed at 75%... WEEK 25 DAY 1 ... omg... 😂😂😂 It really took me half a year to finish this one... unbelievable... 😅 Well, so far I'm still super happy. Everything seems to go just fine but I'll never do this again..haha.. (vegging under a 50W bulb xD)... Soooo... looking at the trichs, I think the harvest window has just opened. There's still a lot of clear but the cloudy ones are starting to come and there's already a little amber on the leaves. I suppose I'm really close to harvest now. I'll be flushing her next time for sure. First, I'll feed her a low nutrient solution, maybe around 25% and half of the usual water quantity because I'm not that sure about when she really finishes so she dries out more quickly. Next, I'll use Grotek Final Flush right before I'll chop her down. I don't want to use this right away because last time my plants were dying a bit too fast so.. not to be repeated ;) Getting impatient now. Hopefully it will be a White Christmas...haha! DAY 2 Gave her one last feed at 25%. Poured only half of the usual water quantity. Left the BloomComplex totally aside because she seems like she's doing a little 'clawing'. Maybe there's too much Nitrogene? Trichs are beginning to get cloudy, with a little amber in between. I'll flush her with plain ph'd water tomorrow probably or should I wait some more days? What do you think? I'm never sure when the time is right... :/ DAY 3 I just took some more pictures with a macro lens attached to my iPhone. Seems like the buds in the middle do have way more amber than the other ones around which have swollen more compared to the ones in the middle but have less amber. The last days, I didn't check the ones in the middle so I changed my mind. I just flushed her with Grotek Final Flush. I'll wait for some hours for the solution to break down the salts and then I'll flush again to get rid of the flushing solution. I'm also gonna switch the timetable to 8/16. (16 hours of dark) and I'll drop the temperatures some 2 more degrees.
Likes
13
Share
Everything is going good. Some are showing some sort of deficiency . Lowered lights a little bit. Going to start watering every other day. One of the critical thunder autos is like 8 inches tall lol definitely breeding her.
Likes
38
Share
So I harvested the top half of the canopy at day 58 while leaving the bottom half to finish up for another week. Looks like the best yield so far running for my runtz muffin grows. Also dropped the water temp at night to promote colouration of the buds which seems to be working very well.
Likes
4
Share
@IamCy
Follow
Here we go into flower. If what they say is true, we're in for a nice color show.
Likes
16
Share
Likes
119
Share
ladies and gentlemen Welcome to peaky house gardens We are pleased to announce that we have finished our first experience with growth made only from cuttings Our intention was to have a lot of weed that was all THE SAME....AND I WOULD SAY THAT WE SUCCEEDED 🤙😉😋👩🏼‍🌾 Let us know if you liked it... we're waiting for your comments
Likes
2
Share
@Ninjabuds
Follow
My three Bubble OG plants are looking fantastic, especially that tallest one! It's reaching for the sky and makes me think the others might have a little sibling rivalry going on. I can't wait to see how huge it gets.
Likes
18
Share
Total de dias 29 - 31/08/2021 ( Mais um dia e vou mudar para floração.) Faco 30 dias de vegetação Total de dias 30 - 01/09/2021 / Rega ( mudança de horário para 12/12 fase de Floração ) ( Fase de Floração ) Total de dias 31 (F 01) - 02/09/2021 Total de dias 32 (F 02) - 03/09/2021 / Rega com um 1ml de Bloom. Total de dias 33 (F 03) - 04/09/2021 Total de dias 34 (F 04) - 05/09/2021 / Rega apenas com agua