Likes
Comments
Share
Going onto week 2 of flower! These were taken dec28, so day 8 of flower. So far looking fine though a bit dehydrated. This one definitely is water hungry now and needs to be watered every other day now. We'll see how she comes along into the next few weeks. D6 of this week (d13 of flower), and we can start to see flowers coming in a teensy bit. We are still watering every 2 -3 days. On D7 we did a slightly premature feed of the flower girl fertilizer. Cheers -Dj Sunstone
Likes
24
Share
@RakonGrow
Follow
+ data+charts online rakongrow.lima.zone/growme-purple-haze-auto-013.html Tag 84: viel viel Gelb !!! +
Likes
22
Share
Day 37: Watered each plant with 0.8L with nuts 1516 ppm, 3221 us/cm, 3.2 EC Still giving sensi grow to the gorilla cookies Day 40: Watered each plant with 0.8L with nuts 1594 ppm, 3391 us/cm, 3.3 EC Still giving sensi grow to the gorilla cookies Did some defoliation
Likes
10
Share
@Its_Fruz
Follow
Big bud stop 32 day Overdrive start 33day Terpinator 1 of 10 days 4ml/l all flowering phase
Likes
46
Share
At the end of last week, finally flower indicators started to show and these week it went more. Day 32: I sprayed them with Rhizotonic this week. This will be the last week for sprays. I don't like to spray my plants while having buds on it even thought it is organic. Always make sure you spray from below the leafs. They will uptake it better and also spray some above. With the lights off. Did some defoliation again and removed some lower internodes which will be crappy buds anyways. Made a video of my feeding bucket as well, in case some of you wonder how I feed all those plants manually. It is a pump with an gardenhose attached. Thats it for this week, Until next week!
Likes
2
Share
Looking sweet again this week!! Buds are super dense and covered in trichomes. Super stinky!!
Likes
148
Share
@BioBuds
Follow
Greetings my dear Jungletamers, So a major surprise came when @MarsHydroLED contacted us and asked if would like to try out their new SP 3000 light. Being a fan of Mars Hydro for years, we of course accepted their offer. We are totally in love with this light. I was when I saw it in another grower's setup and was in awe of its output and results. So with much pride and thankfulness for the presents the Universe bestowed on us, in the form of MarsHydroLEDS offer and the bountiful harvest of the last grow, (which I am thoroughly enjoying btw, such a great weed to have grown ourselves) we start out on a new adventure that we can't wait to share with you. With many lessons learned from the previous grow, a mighty producing strain in the form of Expert Seeds Gorilla Glue #4, a.k.a Expert Gorilla's and a tweaked super soil mixture, we are setting out to hopefully get over a gram per watt, preferably 1.5. The Setup A 4.5 (140 cm) x 2(70) x 6.2 (200) grow tent, giving me a .98 m2 workspace. This space is customized to my needs. A standing fan will provide airflow through the whole grow, a top fan will help guide cooler air past my lights onto the grow. 3 56 ltr pots will be the home for the plants when they are 2 weeks old, up to then in smaller jars. The Light The leading role and star of the show will be played by the Mars Hydro SP-3000, so kindly provided by MarsHydroLED, which we will test and review here and I might say, endorse. I'm very careful with who I endorse and support these days, but a company with that many wins in design, I'm talking ever since their first range came out in 2009 these guys have been raising the bar for the whole industry, I did not hesitate to support this leading brand. If you want to compete with these guys, you better bring some quality AND affordable pricing. Why do I endorse the SP-3000 without ANY hesitation? It is seriously THE BEST light on the market in this price range and size group. It has an enormously effective output in U/Mol and with 30% less energy waste comparing to older LED lights. Prove me wrong! And with a company holding a considerable market share selling thousands of units every month, competing on price and quality, one would think that customer service would suffer. Of course, also Mars Hydro is not perfect, but check the sheer amount of people that not only praise the light but also the service received, should the light somehow not perform up to par. It is this dedication to their customer base that made this company have a fanbase... Yes, a fanbase with a website and a wiki. So if you are looking to buy new lights, check out the END OF SUMMER OFFER at the Mars-Hydro Global Store on Aliexpress: https://marshydroled.aliexpress.com/ 👈 Check their offers but also their score, they ship from a warehouse near you so you don't have the extra import fees!! Cut out the middleman and have a deal on these lights!! At the moment I write this in August 2021, the lights are 408,20 euro when sent from Germany to the rest of Europe, that's 40 euro cheaper than the other Mars outlets, BUT EVEN 60 euros cheaper than ordering at a grow store!! The Strain: Experts Seeds - Expert Gorilla feminized regular. Don’t let the name fool you because Expert Gorilla is suitable for growers of any skill level. However, you do need to be an experienced smoker because Expert Gorilla is one of the most potent strains on the market. Lineage: Chem Sis x Chocolate Diesel x Sour Dubb Popularity: Extremely Popular Flavor/Aroma Profile: Chocolate, Earthy, Fuel Yield: 400 g/m2 Stress Tolerance: High resistance to disease Potency: 24% THC Flowering time: 58 - 63 days The Soil: Those who saw my Monstercropped Gelato #33 grow (you should see it if you didn't, I'm so proud of that grow), know about my super soil and organic nutrients/ permaculture tea combo that starred in my previous diary. Because of the great results, we are going to use the same recipe, adjusted some more with some new ingredients that will complete the mix and give an even more sustained super soil buffer. 20% Atami Bi-grow (very similar to ocean forest) 20% Atami worm castings 20% Atami Coco Coir 10% Hydrocorn 10% Peat powder 1 cup Fossil seaweed chalk 1 cup bonemeal 1 cup bloodmeal 1 cup Microlife 3-4 teaspoons of epsom salt 3 cups of activated biochar (activated with our own permaculture tea) I just made layers, starting with hydro corn on the bottom to aid airflow/run-off. On this I started layering the coco coir, Bi-grow, peat, castings, and amendments in a way that the more mature the plants get, the more phosphorous and less nitrogen they will find. Every time I made three layers, I would mix them by hand. This way we simulate natural soil, which consists of humic layers, composting plant waste, fungal and microbial life, and nutrients from fossilized sources. The Nutrients I will start with just adding 6.4 PH water, although this soil should buffer ph itself and regulate, after 4 weeks, I'll slowly be adding: - Biobizz Grow - Plagron Alga Grow - Biobizz CalMag - Biobizz Flower - Plagron Alga Flower - Biobizz Topmax - Melasses The Tea Some of you might remember the permaculture tea from my previous grow, I have a short video in my harvest page showing how we make it), it will star again in this grow. - (Rain)water - Comfrey (whole plants) - Dandelion leaves - Roots and leaves from the earlier grow - Minor periwinkle (Finca minor) is a plant we have in our garden, it contains an alkaloid that is associated with increased brain function but also is a light toxin for wee beasties and other unwanted guests like gnats (who hate it). - When flowering I add some wood ash to this mix Thank you for checking in on one of my grows again! Thanks for all the love on my previous grow, check it out if you haven't seen it!! Hug Bud
Likes
101
Share
It’s week 2 already. Week 2 is maybe, maybe, the most important week of the plants life. Time to turn the humidity down based on the temperature your room holds, with as much light as you can create. Now is also the time to introduce co2…as long as your humidity and temperature is right and there’s LOTS OF LIGHT. Co2+light=photosynthesis, and in a perfect world your temp is 78 degrees, humidity 50-55%. These are the only things that matter now. These plants are killing it right now growing visible amounts in just a few days. Every thing was pulled off the plant that is under the netting. While the plants were stretching everything was forced back under the net for the 1st 10 days of flower. Then everything is allowed to grow vertically for the rest of flower. At the end of week 2 is super important. I let the plants dry all the way out. If you think they are dry, wait another day. This is to get as much oxygen to the root zone as possible. Then I flush the plants with 1.0 EC that consists of 50ml/10gal cal mag, 50ml/10gal of sturdy stalk(potassium silicate) and 50ml/10gal of canna pk13/14. Canna pk13/14 is the only non Emerald Harvest product I’ve used in the last 3 years. After the dry out/1.0ec flush of the plants we push the plants with daily 2.0ec feedings until it’s time to flush with fresh water the last week or so of its life. Happy growing and see you next week!
Likes
5
Share
@Ensign420
Follow
Greetings fellow growers 🖖 and welcome to my first grow ever. This adventure actually started several months ago when I decided to stop buying flower from dispensaries and just grow my own bud. How hard can it be!? This is actually my second seed of this strain. The first bean sadly died due to over watering (sorry girl, RIP). I was literally watering the cube to the point where water was dripping from the bottom, then heavily sprayed the humidity dome and tray with the vents completely closed. Everyday. Multiple times. I never let the dome or try dry out. So after about 8 days of not sprouting, there was a funky smell of rot. So that was that. Later I learned that rockwool retains a lot of water and can easily drown seeds. So a wet/dry cycle is best for rockwool germination. So even after hours of researching and digging through forums and tutorial videos, I was still under prepared for this journey. Did not consider how delicate the germination phase is. Oh well. Lesson learned. Reset and try again! I hope everyone is safe and stoned during this corona crisis. Just like everyone else in the world, I want this pandemic to be over with. But in the meantime, let's grow some weed! 🖖 [START OF WEEK 01] Day 01 - Monday - 08/03/20 - Total Days: 001 ----------------------------------- - [0830]: Light Schedule: 24Hrs/0 --- Soaked cube in 5.5 PH water for 10 min. Did not shake water out. --- NO NUTES! Only PH'd down to control the PH levels. --- Did not use the default hole (way too deep). --- Flipped cube upside down and made a shallow hole for the seed (less than 0.25" deep). --- Placed seed in and pinched hole close. No additional water added. --- Sprayed the tray and dome with straight water (5.5 PH). --- Vents are cracked opened a for ventilation (about 1/4 opened each). --- Distance between the light and tray was 53" --- AC was set to 80 °F --- Exhaust fan was set to 86 °F --- Room average temp was at 85 °F --- Dome humidity was at 85-99% when sprayed. --- Allowing to completely dry before respraying. - [2200]: Dome and tray were completely dry! Sprayed only tray and dome with more water. Day 02 - Tuesday - 08/04/20 - Total Days: 002 ----------------------------------- - [0845]: Sprayed dome and tray in the morning. Everything was dry. --- Hoping for the best! - [2130]: Everything was dry again, so sprayed dome and tray at night along with a light spray on the cube. Day 03 - Wednesday - 08/05/20 - Total Days: 003 ----------------------------------- - [0830]: Everything was dry again. Resprayed dome and tray. Slightly sprayed cube. - [2125]: Hooo damn!! She popped! Am little stub is visible! Resprayed dome and tray again. --- Still going 24/0 for lights. - [+0033]: Just checked up on her and I swear she grew a bit taller! Getting excited! Day 04 - Thursday - 08/06/20 - Total Days: 004 ----------------------------------- - [0845]: Wow! Went from a little stub to fully sprouted overnight! Everything was pretty dry again so resprayed dome and tray. - [2200]: Tap root is visible! Over 1" long too! Just resprayed dome and tray again. -- Going to prep for hydroton transplant tomorrow! Day 05 - Friday - 08/07/20 - Total Days: 005 ----------------------------------- - [0930]: She keeps growing! -- Added a bit of CalMag to the spray bottle (8 drops to 650ml of distilled water). Resprayed dome and tray. Water was at a 5.4 PH with 141 PPM. - [1045]: Prepped the bubble bucket with 4.5gal of water. Water is high enough to reach about 0.25" above the bottom of the net pot. --- Added 3 drops of Superthrive --- Added 3.5ml of CaliMagic --- Added 2ml Hydroguard --- Then PH'd down to 5.6 --- Solution Strengh: 120 PPM --- Water chiller is set to 20 °C - [1100]: Transplant time! --- Filled the net basket 1/3 with hydroton. When placed in the bucket, air bubbles are not visible, but are slightly below the surface (slight digging will reveal the water/bubbles below). --- Removed plastic on rockwool cube and placed in basket, then filled around and covered with hydroton. Making sure to block any light from passing through the net pot and into the nutrient solution. --- Covered with a half-bottle dome sprayed with the CalMag water from earlier. --- Hoping for the best! - [1300]: Raised Bucket 5" higher. Now light distance is 48" to top of bucket. - [1820]: Lowered tent exhaust temp to 76 °F --- Lowered AC to 75 °F --- Raised bucket even higher so light distance is 30" to top of bucket. - [2300]: Looking good! --- Sprayed dome and surrounding hydroton with more CalMag water. --- Attached timer to light! So new 18 Hrs On/6 Hrs Off light schedule. --- Lights On: [1600] (4pm) --- Lights Off: [+1000] (10am the next day) --- Decided to go with lights on during the evening/night and off during the later mornings/afternoon (the hottest part of the day) to see if temps can be controlled better. --- Please survive girl! Day 06 - Saturday - 08/08/20 - Total Days: 006 ----------------------------------- - [0800]: Everything was dry. Resprayed hydroton and dome. - [2000]: Here first night cycle seemed to go well! Get'n taller! --- Dry again. Removed the dome. --- PH went up to 6.5 so PH'd down to 5.7 --- Ran the top feed drip ring for a bout a minute to wet the hydroton and rockwool with the nutient solution. ---Too scared to leave the top feed on 24hrs (I don't want over water her and cause dampening-off). Will let dry before re-watering. - [2100]: After closer inspection, I think she's looking a bit yellow. --- Decided to add a bit of grow nutes to the bubbler solution. --- Added 2ml of Sensi Grow A --- Added 2ml of Sensi Grow B --- Solution strength after adding more nutes: 176 PPM --- PH went up to 6 --- I hope that the extra chelating properties of the 'PH Perfect' solution is enough of a buffer for proper nutrient uptake. Day 07 - Sunday - 08/09/20 - Total Days: 007 ----------------------------------- - [0800]: Water dropped a bit (mostly due to evaporation) so solution strength was at 190. --- Checked PH again. Was still at 6, so PH'd down to 5.4 --- Ran the top feed for a minute to wet the hydroton a bit. - [0915]: Since she's looking perky but still a bit yellow. So decided to up the nutrient concentration even more before lights out. --- Added 2ml more of Sensi Grow A --- Added 2ml more of Sensi Grow B --- Solution strength after adding more nutes: 199 PPM --- PH went up to 5.8 - [1700]: Checked nutrients. --- PH: 5.9 --- Solution strength: 202 PPM --- Added 4ml of Voodoo Juice --- Added 4ml of B-52 --- PH after adding more nutes: 5.9 --- Solution strength after adding more nutes: 238 PPM - [2130]: Decided to make a new foliar spray to address the continued yellowing. --- Started with 500ml of distilled water. --- Added 3 drops of CaliMagic --- Added 3 drops of Sensi Grow A --- Added 3 drops of Sensi Grow B --- Added 3 drops of B-52 --- Added 1 drop of Superthrive --- Solution strength: 164 PPM --- PH was at 5.9 and did not adjust. --- Gave her one spray. --- Also sprayed the surrounding hydroton. [END OF WEEK 01]
Likes
2
Share
Plants growing slowly, having a problem with mold and I went and got hydrogen peroxide and that seems to control the area of it when sprayed.
Likes
7
Share
@TJHeadley
Follow
Going to pull her out of the light tonight and put her into darkness. Very happy with the way she turned out!!
Likes
41
Share
War ne gemischte Herbstwoche. 3 Regentage, 2 warme Tage, 2 kühle Tage und 3 Nächte unter 5 Grad.. AK zeigt ihr Herbstkleid in dunkelviolett. Die Blüten beim Larry og sind nicht mehr weit von der Reife entfernt. 2 Wochen noch. Ak braucht noch mindestens 3. Lemon kush ist die kleine (neben fat banana) fast fertig. Nur noch milchige trichome, keine Bernsteinfarben. Die andere Lemon braucht noch etwas länger. Banana auch noch mindestens zwei, wenn nicht 3 Wochen. Das Wetter soll kalt werden. Bis zum Gefrierpunkt.. die Hoffnung stirbt zuletzt. Noch läuft es gut 👍 Bis nächste Woche ✌️
Likes
152
Share
@EBxAH
Follow
Week 20, week 10 of flower started 10/18 and the lights are now off until next run! I'll be cutting them down later tonight! So blessed to have gotten this far! I'm at a loss for words after that, happy growing everyone ✌️🍀✌️ Harvest update to follow........
Likes
22
Share
Cosechamos la Tropicanna Poison XL Auto, increíble el color purpura que adquirido al igual que su aroma 🤯🤤 sin duda esperar a que seque y saber cuántos gramos en seco hemos sacado, pero la calidad es excepcional 🌱😍
Likes
Comments
Share
Very easy-to-grow plants that aren't causing any problems at all. However, there are two different phenotypes in structure, and the four plants smell very different from each other (the tallest one smells like melon, and one of the shorter ones smells very citrusy).
Likes
Comments
Share
@Diaaz
Follow
Another week is here, this grow everything go very very well... Without problems, plant looks nice, ph is stable, temperature is stable. Next week i add some co2 :)
Likes
98
Share
💐 🍁: Zkittlez es una de las más famosas y potentes genéticas de la costa oeste estadounidense. Sweet Zenzation (SWS84) es el resultado del cruce entre un clon élite seleccionado de Zkittlez, con un clon seleccionado de Grape Ape, una de las genéticas que intervienen en el desarrollo de la Zkittlez original. Se trata de una genética híbrida con dominancia índica. Produce abundantes flores cubiertas de abundante resina. Efecto relajante y antiestrés pero que, a su vez, produce un efecto estimulante de la imaginación y la conversación, más propio de variedades sativas. Flores muy ricas en terpenos, de exquisito aroma y sabor dulce, con tonos de caramelos de frutas, un fondo de maderas nobles, y pinceladas cítricas de limón, de ciprés, y una sutil sensación de pimientas aromáticas. Consigue aquí tus semillas: https://sweetseeds.es/es/semillas-fotodependientes/3070-sweet-zenzation.html 💡: Mars Hydro TS 3000, como la lámpara de cultivo LED más grande de la serie TS, ofrece suficiente cobertura para un área de 4 × 4 pies con un precio asequible y rendimientos de calidad; a cambio, se puede aplicar tanto al cultivo doméstico como al cultivo comercial. Potencia - 450w Cobertura Vegetal – 5×5 pies Cobertura de flores - 4 × 4 pies La opción abrumadora para la mayoría de los productores que la aplican en tiendas de campaña. Consigue aqui tu lámpara: https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 📆 Semana 9: Se pueden apreciar dos fenotipos,uno de ellos muy sativo. Entramos en etapa de maduracion, esto va que vuela 😍, la resina esta cada vez mas presente ❄️ , los cogollos comienzan a madurar Esta semana estará el TS-3000 de MarshHydro al 100% y 30cm de distancia. Se estan desarrollando mejor que nunca, con una floracion mucho mas rapida, noto una gran mejoria gracias al Marshydro TS-3000. Continuo con defoliaciones Aplico una solución con nutrientes EC 1500 y otra con agua del grifo reposada y PH 6.6
Likes
32
Share
@Proto420
Follow
So 3 weeks in, 4 were males, unfortunately all 4 were descendants of mephisto’s gen’s. Bit disappointed about that but what can ya do. After growing 10 of the bitches at once I am NEVER doing that again. People always talk about how many they want to grow before they do… to those that haven’t started in this pursuit yet, heed my warning lol. They just hit their pre flower growth spurt, I did have 30 days marked on their lives on a reminder on my phone to defoliate because last grow I had so much larf. The fog dog grows nice and stout, the glue sniffers tall and lanky. Both phenos differ very little. I cut off like 3/4 of the bottom nodes off each. Fingers crossed they take it well.