Did defoliation as usual and a little lollipoping. Did 2 complete refills of the reservoir, ph stayed stable for 1 day after the exchange but then super unstable again. Dropped the EC with the second refill to 1000 to see if it stays stable. Ori is going good, already looking frosty, NL#2 is comming aswell, NL#1 not so much.

@1.2-1.3 kPa

This was a fun project that was a few years in the making and a year later to see if they would last a season for this upload to happen. Before any of this I would bike aorund town grabbing up all the old Ikea solid pine bed slats that I could find and storing them in the basement. I have a lot of wood down there, any size worked as long as I have enough of them. The hot days to find them were the first and last of the months because that's when people where moving in/out. I also kept an eye on the free section on local online classifieds as well. The entire purpose of this was to recycle as much off the streets as I could before buying anything to finalize the project. In the end I only bought sealer, screws and some takeaway/beers. All the wood was 100% free and salvaged off the streets of Toronto saving it from the dumpster bin. After collecting all the slats for about 2 years I was playing aorund with them on how I wanted to make this work. I had previously done a little project like this before but I messed it up and the boxes where crap. did not last longer then 2 seasons, they where thin and shallow as well could not grow much of anything in them. I Was talking to my friend who is renovating their house and we brainstormed some ideas on the boxes, I found some designs I liked online and said lets make something like this out of what I have here. We tossed out a few of the design features when looking at them as it would have been wasted wood and extra work not needed. If I had more wood them maybe it could have been an option but simple was the name of the game. They taught me what I needed to know like how the miter saw and sander worked, plus all the other tools I was using. They did help out with a table saw and creating the triangle support joints in the corners, They used some pine left overs they had while making a staircase indoors. I did not feel up to the task of using a table saw given all the relatives I know who have lost a finger to them. In the end we decided the design would be three boards high and take an alternating pattern on corners. layer one short, layer 2 long, layer 3 short. Went with a galvanized and painted deck screw so it can take the weathering. Ran into some problems like making everything level as some of the boards were warped and other ones had undesired aspects like knots and tacky sticker goo I could not remove. So I used them for the base that will not been seen so much. Clamped everything down and called it a day. Once it was all done and over with, I then brought them back home from my buddies work garage and started to seal them. I went with a boiled linseed oil as its a food safe option should the wood degrade into the soil I will plant in them. I will need to reapply it to the boxes year after year but the main coat is the most important one and I put it on 3 layers with a good dry in between coats. the inside of the boxes that where coated did not degrade at all as the sun did not hit them so it will not need a new coat just the outside. Overall the end result was very impressive for myself, I've never taken a woodworking class ever and It was a near perfect outcome for me. Heavy Duty Planter Boxes for all my gardening needs. I made a last min decision to add in a plastic liner to preserve the wood even longer and stapled that into the frame. it has held up quite well and may need replacing end of 2nd or 3rd year out in the sun. Used a thick moisture wrap plastic with UV protectors in its formula. Lets see what I can grow in them this year! m0use's haus of projects - garden box edition

This plant was grown in a 15liter autopot

From sprout, I've been watering every 3-4 days. Been very consistent with this. Yellow tips been appearing. I think it could be Magnesium or Calcium deficiency. Hit it with some Calmag with iron.

3rd week started with The 1st topping and by pinning down the girls.

SWISS DREAM ROSE 🌹 CBD AUTO KANNABIA SEEDS Week #10 Overall Week #7 Flower This week she continues to shine ✨️ 😎 her buds are a beautiful purple color then you see the sparkle of the trichomes against her purple buds that have white and orange hairs throughout. Once again another example of the great genetics from KANNABIA SEEDS!! Honestly just blessed to be growing CBD organic medical marijuana. Thank you to KANNABIA for all the support 🙏!! Additional thank you to FOOP!!

Most ladies are showing signs of flowering so today I will start counting the weeks. Here u can also see my mutant/special ladies. They germinated a bit different from the others. Day 3 of flower is showing some major progress‼️🙌🏽 I did NOT top any of these mutated plants. I only removed some very ugly growing leaves. So everything u see on them is done by mother nature.

🤩 We’ve beautiful flowers a lot. 🔥 Soft burn by potassium (K). 📝 I maked a flush and put down for half feed EC. 💦 Flushing with 10liters solution from Delta 9 for substrate cleaning, balance and to offer some aminos. ✌️🎃 Thank you for checking my cultivation.

Heute beginnt die 3. Woche der kleinen 3 Z-Up's von FastBuds. 💚 Die Ladies waren inzwischen bei Ihrem ersten Friseurtermin und wurden getoppt. ✂️ Sie haben sich seitdem bereits gut erholt und wachsen bereits wieder. Ich freue mich bereits sehr auf die kommenden Wochen. Genießt euren Sonntag. 🌤️

Venimos muy bien con todas las plantas a pesar de esta ola de calor que no se quiere ir. Por un lado las fancy están en su etapa de lavado para ser cortadas próximamente. Las colombian Jack vienen flotando muy vigorosamente, y la kritikak k se está bancando el calor del exterior como puede

NOTE 1: Afgooey Auto pheno #3 turns out it's a MALE. Resembled nothing like her two sisters ran at the same time. In fact, I had to move her to the 12/12 tent to initiate flowering. Little did I know or expect She would be a He. Lola by the Kinks is rattling round my brain about now ;) FEEL FREE TO HIT THE LIKE BUTTON IF YOU LIKE WHAT YOU SEE ;) 2x4 French Macaron - at the time of this posting, FM is heading into week 8 flower. Second extensive flushing w/fresh rain water due to acidic conditions (ph >5). Been struggling with ph the entire flowering. I speculate ph issues due to over feeding. Ph is roughly 5.8 to 6.0 after flushing. At this point, flushing with plain RO water until harvest. NOTE 2: I've introduced two 5 gallon bubble buckets into the 2x4 grow tent. Both buckets have medium air stones running from a 125 gph air pump. Given French Macaron isn't scheduled for harvest until mid-January, I might not have cutting ready. First grow may have to be from seed. Update later. 3x3 Afgooey Autos and clones from previous grow - Afgooey #1 and #2 are firing on all cylinders. #2 running a bit acidic (>5), so flushed back to neutral with roughly 7-8 gallons of fresh rain water ph at 7.0 to 7.2. Same with clones (i.e., ph very low). Flushed with fresh rain water too. A couple days later plants look so much better. Wait till plants nearly dry before next watering. Trimmed and cleaned up three of the clones growing weird. Felt a bit like trimming a bonzai tree. Let's see how they respond.

I started Flushing two plants as there nearing the end of there days. I'll start Flushing the others this week apart from the kalimist indica pheno as it started flowering 3 or so weeks after the others even though they were all forced together. (alkward bugger) Some of the plants are showing red /purple colours a little bit 👍

Started flushing both plants on 11/29, expect to harvest on the 11th or 12th of December. Trichomes are milky with ambering in WC1 so we are starting the flush on WC2 slightly early because we need the space to dry. Looking great though, very smelly and dense buds.

Hallo zusammen 🤙. Habe sie heute geerntet. Sie riecht sehr lecker nach Vanille 😋. Wir sehen uns in 2 Wochen mit dem Erntebericht.

Currently sitting at day 38 of flower. Forbidden Soda- Looks incredible, buds are a pinkish purple. Smell is a fruity tangerine Forbidden Dream pheno #1 - this pheno is the beat smelling and looking, started turning purple from the onset of flower, the smell is like grape soda mixed with sour patch kids. Forbidden Dream kush pheno: this was the pheno that I though hermied, it’s not possible that they were just calyxs building on the top buds. They never got bigger, didn’t release pollen, and some now have pistils thru them, but will see once harvest time. Very impressed with the forbidden Dream strain, as for the forbidden soda while it does look incredible , this was selected from 3 different 12/12 seeds where the other two were not good. The forbidden dream seems to have better phenotypes overall and buds are a lot denser..

The ladies are coming along beautifully. I did a flush last week and switched the nutrients. I also did a little defoliation and the heads are starting to develop nicely.

Hi everyone, friends! And well back to the Peaky Californian enchanted valley Apical peaks continue to inflate extremely invading the network too! The shoots are increasingly purple ;) how beautiful!