Divine Indica is a beautiful plant although she was very susceptible to everything along the way and it is unfortunate that the powdery mildew took over. If it had only been minor the wash would have cleaned her up but that was not the case for her, we also lost some of her to bud rot which was not a shock with the weather this season. As for the weight, it is an estimate due to the way our harvest took place this year and also a lack of scale. One thing spectacular about this girl is her aroma so we would like to see how she handles growing inside in the future.

Medicine

Just starting to see the autos flower today, so the stretch is on. All topped and lst except for 2. Photo veg is on, waiting on some clones to root. Room will be filled with 3 top cultivars: 1) Pink Sugar Breath by Visions (GD growmies, top cross, check him) 2) cactus breath by Barrie Grower. Amazing cut 3) Slurricane by Inhouse. If you know you know Special appearance in a scrog net made by Peanut Butter OGKB gifted to me by Original Sensible Seeds. These are one of the very few breeders here on GD that I will sprout. Amazing every time Hope everyone has a good week, except you bots. Bots go fuck yourself

Es realmente impresionante ver el crecimiento que ha tenido en menos de 1 mes. Unos días más de vegetación… quizás sale alguna poda apical más, unos días y luego a florar 🌹😍👍💪🦍🦍🦍

Approaching week 5 of flower. Ladies are healthy as can be. No signs of deficiency or stress. Increased bloom nutrient feed. Removed Grow nutrient from feed.

Well she has grown that's for sure. She needs to be transplanted to a bigger pot. Also defoliated... I will attempt this tomorrow. I need to acquire a bigger pot. Worse case scenario I use a 5 gallon bucket, and drill some holes. I'm switching to flower 12/12 this week. So she is going into a 15 gallon pot now and getting a good trim. Go check out Viparspectra products they have what you need. https://www.viparspectra.com/collections/xs-series/products/xs-series-xs4000 Use code, "GDVIP" for an extra discount.🤗

Week Thirteen Flower Week 7 - so the high humidity bite me, found some budrot on 3 headbuds of the orange sherbet and the gelato. It was easy to remove and everything else looked fine. I got a second venti and pumped up the exhaust fan. This was the problem, I kept the exhaust to low. Luckily after fixing the problem, the run ended without any more problem. At he time I planned the harvest date and decide to wait one more week to get full 8 weeks of flower. So one more week to report, after that the harvest results will be posted. I want to include some pics of the finished flowers, so this will take another week or so to post. Greetings

Very pleased with the size of the buds on this plant. Heavy tops . Sadly enough quite some foxtailing but been through 2 heatwaves back 2 back with little to no cooltime in between where it peaked around 40°C in the growspace .

The big girls have the tent to themselves after the GZ auto was harvested this week , looks to be around 5oz when dry so a nice little bonus smoke . Tied the girls out into final positions and they are looking and feeling chunky some of these colas are over a foot long and getting smelly as .

She has grow very well and the buds are nicely cover in crystals

Hello everyone 😎 Day 30 she grew fast with a great structure and with a beautiful green colour on the leaves. She is responding superbly to topping and Ist aswell growing like nothing has been done to her! Have a great day 👨‍🌾🏻

She’s tripled in size and doesn't seems to have stopped stretching yet. I had to zoom my camera out to get her photo. Moved lights up again and she’s back to being 6” under. Up they go again. Lots of nice pistils growing all over. She’s getting thirstier too, upped feeding to 2 litres a day to produce 10% run off (2 watering a day in total). I’m going to defoliate a bit this week. The last photo is of 4 of her clones, suppercropped in solo cups, growing at 90 degree angles 12/12 on a little shelf.

She was not suppose to grow that long..22 weeks..but due to the issues I had with the nutrients set me back a few weeks.. a really nice strain to grow i must say..I realized that i do not have enough watts for the grow box..and this affects my yealds.. Its not the best yeald in the world but its bud i didnt have.. Really not happy with the dry weight..but its oky i understand Only real problems i had was my Ph levels that keeps dropping but that is normal i suppose..My light coverage isnt kind of bad cause i ended up with a lot of small nugs that clearly didnt get light.. well it's all about learning..im learning as i go along..every grow gets better and better.. at least this time I'm growing a strain I'm mad about.. the 48hours darkness at the end of the ripen stage just before harvest makes a huge difference! the buds doubled in size but it will lose the density will drying.. buds are on the rack buzy drying..hence i could not give a dry weight yet. I'm alittle gown looking at the buds almost dry and they shrunk in size and arent as big as they looked..its alittle heart breaking cause i got only a few good sized bud and the rest is just this little tiny nugs the size of my half my pinky finger nail..😞some are slightly bigger than that..and then the top nugs which was the main colons ..they are about 6 good sized buds..its okay i learned from her and its not a waste cause she did give me some buds in the end.. now the curing starts..going to cure for a month more or less will see as we go along.. Super Cheese Thank you!0

Welcome to my Ztrawberry Diary sponsored by Green House Seeds. Days 85-98 Flowering Days 35-47 Flower Days 17-30 Plant is coming along real nice. She has stacked up in mass, rock hard big ass buds. Gonna be a very intense smoke. Has taken awhile for the top buds and bottom to follow up. Nearly all pistils up and down the plant are 70-30 Trichomes are nearly all cloudy pushing 35+ambers. Another week on water after this. I've upped the co2 to combat the high tent temperatures of 29c. Her buds are big, dense, stick of ripe berries with hints of gas and other a dank musk. Bit pungent. Really nice. Time for soft flushing. And to go under SF-1000 or lower the temperature. Diet/Defoliation Added a few of plagrons organic like with Atami products and all buds are getting nice and evenly ripening. Very happy with the products I used this grow, mainly Green House Feeding mineral line, and got some amazing fungi from the Biobloom I used at the start of pre flower. Carried her through most of her bloom phases. And I had to add other PK booster and a few terpine enhancers. This was her last day on nutrients. She'll be going under my SF-1000 now for ripening with lower temps. She's only been heavily on co2 this wk. (A few days. So, it won't of had much affect on it boost wise). Got a decent defol through her later stages of bloom. Most of her fans were removed and took a few sugars, well they were fans before the cakyxs swollen. Very sticky with a lovely gasy berrie smell that's very lovely. Thanks to my sponsor from Green House Seeds, & shout out to mars-hydro for the lights. COUPONS Mars-Hydro "ggs" 3% WW Spiderfarmer.eu "ggst" 3% EU only. Zamneisa "GROWITGD" 20% WW.

12/16 - Howdy there, growers. Here we are at the start of week 11 for this lady. Day 77 from seed. She still have a little ways to go, but she is coming along quite nicely. Buds are stacked and rock hard and getting frostier by the day. I'm trying not to rush this one. I removed the Pro-TeKt from her regimen as she isn't growing anymore. I switched her feed over to ~1.0ec (500ppm) to taper her down during her last two weeks. I am also going to taper the lighting schedule down as we approach chop on her once her sister is no longer in the tent. Thanks for checking out the garden, and, as always, Happy Growing!

I think about the fact that it is no longer necessary to cut leaves. I cut it a lot, but I notice that many people cut a bunch of leaves at one time, although somewhere I read no more than 10% at a time. When I gave fertilizers, I always diluted them with water even more to reduce ppm Day 68: I added cal-mag to the diet because the leaves are really turning yellow from the bottom. 0.5 ml Day 70: I added 1 ml cal-mag

Got the tent open to keep the humidity down

2 of my Blueberries were root bound one more than the other.. i transplanted them into soil in a bigger pot. I Have a bunch of strains going on but one vegging mother soon ready to get in under the CFL. Loving the HPS tho wont go back to LED any time soon. Feeding with CANNA terra nute line and using the last Bud candy and big bud from Advanced Nutrients before going full canna. The monster crop was a succes but it took long before shooting. Hope my other clone will do better. I have a very healthy strawberry banana that will be my motherplant as well as a sweet valley kush that are just a seedling now. I am very happy with the HPS from phillips it work wonder in my oppinion :) I started 12/12 as well this week

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.