This plant is ready and I flush it RN, pretty pink dress with a lotta tricomes makes her beautiful Not a big girl so I really hope buds will be good, tasty like the smell she has

day 63

Day 42. Huge disaster !!!! I got stucked at my summer time house and was with the girls after 7 days, normally i water them every 4-5 ... Happy Growing !!!

Flowers are fattening up nicely, she took a bit of stress here and there but she takes it with no problems. Endoboost hydro is keeping the roots safe. Now we are waiting for those tops to fatten up.

Overall very happy results from this Auto Alueberry OG it is an unreal autoflower strain producing very top shelf buds strong effect nd pungent flavour/smell. . Thanks to Dutch Passion top quality genes.

Hey everyone :-) This week a lot has happened 🤗🍀. The 5 that are already in the 12/12 cycle explode day after day 😍😅. All others have been repotted, and will remain in the vegi phase for 1-2 weeks. Otherwise there is not much to say 😃. I wish you all a good start into the week, let it grow and stay healthy 🙏🏻🍀🌱

d.50 a few spots appeared on the leafs. gave a 10 ml dose of bio p k and waiting a week before giving a dose of orgatrex and bactrex edit: d.50 i also gave 0.5 ml of calmag from Biobizz edit d.53 will i be giving her the orgatrex and bactrex treatment ✌️🌞 d.53 she got 20 ml orgatrex, 1g of bactrex and 0.5 ml of biobizz calmag d.54 added scrog and did lst with clips to even out the height and space… still need to adjust it.

First week is over. Overall it going well. 4 of the 6 plants are excelling; super boof auto and gorilla z auto). The 2 strawberry gorilla autos are not doing very well. Right now for strawberry gorilla, I believe some of my issues may be genetics specific. Both plants exhibit same issues. Each one is in a different medium. The only constant is strawberry gorilla auto genetics. I am going to continue growing them for another week to evaluate options. One I am fairly sure is going to die. The other, while overall looking terrible, has some new growth starting that is a better healthier green. Hopefully it is just a rough first week. But these are autos. A rough start usually means a rough entire grow. Not necessarily that they will keep having issues, but due to short fixed veg time frame, these 2 have significantly lost growth time. The DIY IoT automation side of this grow/project is progressing nicely. I worked on the PAR sensor and have no deployed it for its first 24 hour “soak test” to ensure optimal operation for 24+ hours. If the soak test last, it means it’s pretty much ready to be deployed. The PAR sensor is quite good if I am being honest. I was able to verify my ss550 LED at ~1000 umol/s it is rated for at a specified height. Now is when these sensors start providing real value. First week of growth always requires low light levels/high light height to accomplish providing somewhere around 150-250umol for seedlings. Without the PAR sensor to use at the beginning, I do what I always do and adjust height and light levels. Unscientific, but it’s how most growers are doing it due to PAR sensors like apogee for the dli500/600 PAR sensor starting at 5+ and anything below this range usually is not a true PAR sensor and no longer of value outside of “consistency” checks. They are lab grade, they are meant to be, this explains their price. Apogee and other comparable sensors are also spot checkers. They are used to check, validate and log, but they are not meant to do it fast or at a rate that is useful beyond average DLI. They can’t be integrated into automation systems. They largely are siloed devices that work alone and must manually transfer logs for analysis. The Dfrobot PAR sensor is a real time, continuously polling, connected, that can be interacted with in real time and used to control automation. It is also industrial grade with ip67 rating compared to apogees ip65 (it’s a spot check probed not meant for automation integration). Basically, apogee are amazing sensors, but they fundamentally are unable to do what I want. This Dfrobot par sensor, while not lab grade, is nearly lab grade, which in turns bring the sensor significantly down in price compared to a “lab grade” sensor that cost 4x. I am not a researcher or a scientist. Lab grade is amazing, but I literally cannot abstract additional value for the statistically significant accuracy difference (remember statistics and our p value, statistically significant is often a very small number , but in the real world, it does not matter since I am not doing actual research nor needing perfect controls with only a single variable change. I am only one person. ;) Uhh… I think I got lost on a tangent, ultimately PAR sensor confirmed 251 umol/s, which is the maximum these should be getting. But 4 are thriving, 2 are not. I’m not adjusting the lights for the 2 struggling to the detriment of the others Now that the PAR sensor is running 24 hour soak test and about to be deployed full time, I’ll be focusing on the other two sensors; the 4 in 1 soil (ec, ph, soil temp, soil moisture) sensor and NPK sensor. All three of the sensors mentioned are connected by a single Ethernet wire for communication and power to simplify deployment. The 3 sensors will ultimately plug into a shared hub that allows for easy plug n play for these sensors and future ones. Hopefully by next weeks post I’ll have full logging of all sensor data to my timescale database which will store all sensors logged data for future analysis.

White Runtz has been the biggest plant out of all the SOG plants this run. It has large leaves and a large body to go with All of the plants have really taken off. Usually I have a couple plants that are much smaller but all of these plants are getting huge. Seeing I got a new eluefah uap1 500 the other day and I have my 2 fastbuds plants under that now I have my spider farmer light free. So I popped up another 2x2 and moved 3 of the 10 plants into the 2x2 and left the 7 other in the 2x4.

She’s looking happy Small for her age Let’s see what happens 😊 Happy Halloweed

Week 7 update 🌱 – the journey continues! Last week, the first signs of nitrogen deficiency started to show. I tried to compensate, but I might have slightly overdone it with the chemical nutrients. To correct things, I flushed the roots the day before yesterday, but it seems to have caused even more stress 😅. This is my first time working with hydro, so it’s all a learning process. I’m hoping everything will bounce back, and to avoid further stress, I’ll now only use potassium hydroxide to balance the pH 💧🌿. Fingers crossed that this brings the system back on track! At the end of the day, it’s all about experimenting and improving. I’m staying positive and keeping an eye on the ladies – they’re tough, and I’m sure they’ll pull through 💪🍃. Follow along for updates, and let’s see how this journey ends! Thanks for the support and good vibes 🌺✨. --- Woche 7-Update 🌱 – die Reise geht weiter! Letzte Woche haben sich die ersten Anzeichen von Stickstoffmangel gezeigt. Ich habe versucht, das zu kompensieren, aber scheinbar habe ich es mit dem chemischen Dünger etwas übertrieben. Um das Ganze zu korrigieren, habe ich vorgestern die Wurzeln gründlich gespült, was allerdings für noch mehr Stress gesorgt hat 😅. Da das mein erstes Mal mit Hydro ist, lerne ich noch dazu. Ich hoffe, dass sich alles wieder fängt. Um die Pflanzen nicht weiter zu stressen, werde ich jetzt nur noch mit Kaliumhydroxid den pH-Wert anpassen 💧🌿. Drückt die Daumen, dass das System sich jetzt stabilisiert! Am Ende geht’s darum, zu experimentieren und sich zu verbessern. Ich bleibe optimistisch und behalte die Ladies genau im Auge – sie sind zäh und ich bin sicher, dass sie sich erholen 💪🍃. Folgt mir für weitere Updates, und lasst uns schauen, wie die Reise weitergeht. Danke für eure Unterstützung und die positiven Vibes 🌺✨.

The demo clips show how the nutrient and air supply are being delivered to the root zone. After the flooding of the root zone to the top of the container, the pump turns "off" and the nutrient solution simply drains back down the supply pipe and out of the pump intake, which in effect, has now has become the outlet :)

Number 7 is smelling great and has 1 more week of flush left before it is harvested. Starting to show signs on leaves as plant is using stored energy. Thanks again fast buds. Thank you grow diaries community for the likes,follows, and subscriptions on my YouTube. 🌱🤜🤛

Cómo ven va bien grande mi chemical bride y va creciendo muy bien

I never thought I'd say it but i think when it comes to my indoor C4 vs my outdoor C4 Indoor takes the prize, I mean that's only for now lets see what happens in the upcoming weeks. I'm sticking to my bat turd mix and all sun, I shift her around during the heavy showers, yea it rains out here. I don't feed no store bought nutrients all from nature same goes for my indoor ... if you look closely you'll see that I lst her it's only because of her mutation.

God's Vagina seedling seems to have finally established its roots and begun to thrive. The clone was yellowing I belive from being root bound. She was transplanted today 04/27. End of the week update! 05/03/2020 God's Vagina was topped at the 5th node yesterday(05/02) First time ever topping but she seems to be recovering nicely. Will begin with low stress training on the clone soon in an attempt to keep both plants at roughly the same height. Yellowing on the clone is nearly all gone. Planning on keeping them in veg for another 6 weeks.

Lovely body high on this one! Amazing for pain relief! Nice head too, taste and smell 10/10. Little yield but that was probably because of my mess ups throughout the grow. Overall a great strain Only yielded 9gs, was a small plant but no doubt I stressed it along the way so I think it’s more down to my mistakes than the genetics Tastes of grapey diesel, 10/10 🍇 Smells of straight grapes, 10/10 🍇 Appearance, very frosty and great looking bud(could be trimmed better but that’s on me)! 9/10