Likes
Comments
Share
Last week only lots of tap water for my Mexican Ladies. Her leaves got a bit yellow but that was expected and planned. Today was the day to thank them for their service and I cut them both down to drie, with all leaves included except for the fan leaves. Can't wait to see and test the results! She is not a heavy packer, in weight it won't be a lot but I am aiming for Quality > Quantity 😏
Processing
Likes
17
Share
1/14: All 3 are looking great! This morning, I did a foliar application of big bloom and fulvic acid, then about 5 hours later I watered them with about a half-gallon of rainwater each and added armor si, humic acid, endoboost myco/tricho, liquid molasses, and a bunch of cal-mag. Today, I also I wired up and mounted my new samsung sun board strips (660nm/730nm) and my Solacure FlowerPower UVB fixture. I'm running the deep red/far red bud boosters a few hours per day right now, but will run them for the entire photoperiod once I start flowering them. I'll run the UVB for 4 * 15-minute sessions a day for the full flowering cycle, and if they don't protest too much I'll increase each session by 5 minutes and evaluate again. Some strains are more forgiving than others and I've got 5 different strains in this space...so really not sure much time I'll get away with exposing them to the deadly rays without damaging them too much...😈 1/15: I received one of the rapid led/growmau far red initiator pucks today. With the placement of my UVB light, I'm realizing I'll need another far red puck to have even and intense far red coverage, so I'm ordering another with Prime delivery and waiting to start flowering until I receive it. I sprayed them down really well with ph adjusted rainwater tonight to rinse off nutrient build-up from foliar applications. 1/16: I'm really excited to try flowering under 14/10. I grew photos indoors on an off for 15 years before I semi-retired. If I added up all the additional flowering time I could have done through the years if LED technology existed, I'd have had an extra truckload of bud to smoke. I did another application of Axiom Harpin a|b Proteins this evening, right before dark. I'm expecting a big growth burst this week, leading up to the flower stretch. I really need them to trigger under 14/10 within 4 or 5 days🙏 ...if not, I'll switch to 13/11 and wait a few more days🙏😟..if still no pistils are poppin, I'll go to 12/12 and chalk it up as bad luck or varietal indifference to Pr and Pfr manipulation. 1/17: I fed each of them about 3/4 gallon of full strength veg nutes. This will be the last. I'll go with half-strength veg and half-strength bloom for a week, then go with full strength bloom nutrients until I start flushing them in 6-8 weeks. 1/18: I installed the second far-red flowering initiator today and got all my timers configured for flowering: ========================================= timer#1 - power strip with qb's and red boosters 10:00am -12:00am timer#2 - (dual/independent setting) sideA- 3-way cube with uva bars 10am - 3pm 7pm - 11pm sideB- flowerpower uvb 1pm - 1:15pm 4pm - 4:15pm 7pm - 7:15pm 11pm - 11:15pm timer#3 - far red pucks 11:00pm - 12:15am timer#4 - sub-canopy tube 10am - 1pm 3pm - 6pm 8pm - 11pm ======================================== I also did some testing on the timers and sealed myself into the closet to check for any light leaks. All good.👌 1/19: Tonight is their first long night. It's ON!👍 1/20: I watered them today with about a half gallon each. I'm seeing calcium and magnesium deficiencies here and there, so added some boomerang and heavy cal-mag-Fe along with liquid molasses, humic acid, and endoboost myco. I also foliar fed with big bloom and fulvic acid. That's it for week 4-
Likes
12
Share
@Ace0411
Follow
Wassup fellas! Ita day 42, which means end of week 6! The plants are definitely healthy and love their 100% organic dieta day more than ferts, resin production is on point and so does the smell. They got dense enough, prolly this will be their lady week of swelling, and then it will be' pure ripening. Well, thanks as always for staying along with me in this journey and see y'all next week!
Likes
69
Share
@nonick123
Follow
Día 37 (08/07) Ajustes de LST en todas las plantas! 🚀 Día 38 (09/07) Ajustes de LST en todas las plantas. Las ramas inferiores están creciendo como un cohete! 🚀😍 Riego con 250 ml H2O pH 6,5 Día 39 (10/07) Las plantas se muestran sedientas! Creo que el cepellón está lleno de raíces y piden el trasplante! El crecimiento no se ha visto afectado de momento Riego con 500 ml H20 pH 6,5 Día 40 (11/07) Paso a regar con 500 ml / día, ya que hace mucho calor (30 ºC) y efectivamente las plantas ya han copado la maceta de raíces Riego con 500 ml H20 pH 6,5 Día 41 (12/07) Riego con 500 ml H20 pH 6,5 Clones! Mi experimento vuelve a demostrar que NO necesitas complejos productos de clonación ni sistemas para obtener clones! Hace 15 días puse 2 clones con el tallo sumergido en miel durante 5 minutos en una maceta de 400 ml con PRO-MIX HP BACILLUS + MYCORRHIZAE He mantenido la humedad alta con una cúpula de humedad casera hecha con una botella de agua PET de 5 litros cortada por la mitad y pulverizando a diario. Han estado los 15 días en mi terraza con luz indirecta, y temperaturas que rondan los 30 - 32ºC durante las horas centrales del día Hoy los he trasplantado a una maceta de 1 litro porque ya habían formado raíces y empezaban a formar nuevas hojas! 🐥🐥🚀🐥🐥 Día 42 (13/07) Riego con 500 ml H20 pH 6,5 Día 43 (14/07) Trasplante a maceta definitiva de 21 litros de ROOTPLUS Pot de GSKOREA GLOBAL! Estas macetas son una maravilla! Proceso de trasplante: Se prepara con 17,85 Litros (85%) de sustrato PRO-MIX HP BACILLUS+MYCORRHIZAE + 1,05 Litros de Humus de Lombriz (5%) + 2,01 Litros de Insect Frass (10%) + 210 gramos de Earth Vibes Super Soil (10 g/L substrato) Se llena la maceta de sustrato con las manos (limpias) y rompiendo los trozos más gruesos, para que el sustrato esté aireado y esponjoso, sin presionar Se coloca una maceta vacía de 6,5L para que quede la forma perfecta de la maceta donde están actualmente Se espolvorea la parte proporcional de la probeta de microorganismos sobre el agujero de trasplante Se saca la planta de su maceta actual (bonitas raíces 😍) y se coloca en la maceta final Se riega muy lentamente hasta percolación profunda con H2O EC 0,5 pH 6,5 Una vez asentada, complemento con un riego de 500 ml con 25 ml/L de Humus de Lombriz Liquido Se coloca mulch (acolchado) de paja para evitar traspiración excesiva y cuidar a los microorganismos del suelo A ver como reacciona al trasplante! Aplicación foliar Kelp hidrolizado de Lurpe Solutions a 0.25 ml/l Realizo ajustes de LST aprovechando el trasplante a la nueva maceta. De momento tienen una canopia muy bien formada! 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
4
Share
SPEEDY BOOM 💥 AUTO/ KANNABIA WEEK #10 Overall Week #4 Flower This week no issues she's not the biggest plant but she's growing in extremely hot conditions and she's doing fine. This lady is ready to grow she's easy to grow she doesn't need much besides light and water. Stay Growing!! Kannabia.com SPEEDY BOOM 💥 AUTO
Likes
6
Share
Pasaremos la tiger bomb al armário grande, cuando acabemos el seguimientos de Royal Queen Seeds! Entrenaremos el Scrog por primera vez.🤙🏻
Likes
2
Share
@Miketama
Follow
Plant 1 30 g Plant 2 30 g Plant 3 10g Total 70 g dried and trimmed buds They smell of lavender and taste of lemons and blueberries, relaxing but not biting effect
Likes
4
Share
Still having major problems with fungus gnats and the populations have exploded! So I ended up doing a drench of hydrogen peroxide to kill all the eggs on contact that where in the top inch or so of the pots. Also on the pots that where worse I added sand to the top just as an extra precaution. I added my second and final layer of trellis. I mostly use the trellis for support and for spreading out the canopy and opening up the lower bud sites to the light. We can see the bud sites are starting to set and are looking pretty great for 2 weeks of flower!
Likes
2
Share
@MistaOC
Follow
25.05. 🌿 Day 25 – Stretching Begins! The plants have noticeably stretched since the last update — a clear sign that they’re moving deeper into the vegetative phase. The vertical growth is picking up pace, but they’re still looking strong and well-balanced. Despite the rapid upward growth, structure remains solid, with thick stems and healthy leaf development. The 19L pots and BioGrow feeding seem to be doing their job — no signs of deficiencies or stress. Light distance and environment are being carefully managed to control the stretch and keep the plants from getting too lanky. So far, they’re adapting really well. 💪 Overall: they’re thriving! —————————————————————— 27.05.
Likes
3
Share
@kdifiori_
Follow
It's harvest week for Pineapple, Skunk, and little Gorilla Strawberry, which I put in the room together for two days of darkness before harvesting. Cheese is getting heavier and heavier due to its stem, and unfortunately one flower has broken, but luckily it won't be long for her either. Bubblegum has been a wonderful surprise given how it started, and it too is a little monster. I'm really proud of my girls!
Likes
18
Share
@Budhunter
Follow
Week 5 started well, plants looking good and time for some defoliation and lollipoping on low branches.. probably gonna flip to flower next week… let’s goooo
Likes
4
Share
@smexy
Follow
Hey some early Week2-flowering update. In the video you can see my 24h aerated compost tea. mhh that smells so good. I want to drink it too :P Each plant got 2L I did a lot of defoliation again I wont be there for a few days :P I turned the light to full power with a distance of 44cm stretch is doing the rest cya
Likes
17
Share
End of week 4 marking around the half way point as both strains both have 8-9 week flower periods. Runtz Muffin #1 already looks like it's going to have more of a longer airy bud structure compared to the others
Likes
Comments
Share
Week 6 of flower and once again, some excellent bulking going on here, I was happy with it.
Likes
25
Share
*****Week 14 growth – March 6 to 12, 2021 – Week 5 flower ****** These girls are certainly different from one another. Pheno 1 has a more bushy appearance and Pheno 2 is lighter in color and more bud swelling at the tops. Expect to see some nice colors come out in #2😃 In the end......it’s about the smoke😂👍🔥 Bud Fusion being introduced this week. Into the last phase of feeding during flower now. Nitrogen is continued to be reduced as its late flower. Keeping up the feeding ppm this week as we are getting to the end. May be pushing them a little more than I should but finding out how they react for next run. Still continuing to play with the light intensity and seeing how the girls react to my environment conditions when pushed harder. Could have backed off and stayed with 100, 300, 600, 900 PAR levels at the different stages but I have trying to go a little higher in the late stages and going over 1,000 PAR. Little more detail….. Mar 6/21, Day 29 - Dry out day - Changed light cycle to 11/13 today to help with light intensity and reducing DLI. - Light power reduced to 425 watts Mar 7/21, Day 30 - Keeping up the feeding but reducing nitrogen. - feeding with micro – 1.5, bloom – 2.5, ult B – 0.5, carbs – 1, B Storm – 2, S Storm – 2.5, Bud Fusion 0.15gr/l, Terp – 1.5, Jet Fuel – 0.5, Rezin 1 - 1150ppm and 6.0pH - 4L Mar 8/21, Day 31 - Watering with 2L feed from yesterday and 16L plain water - Over shot the pH - 400ppm and 5.9pH Mar 9/21, Day 32 - Feeding again with Grow – 0.5, Micro – 1, Bloom – 1.5, Carbs – 1, Magnifical – 1 - Didn’t add many of the supplements - 875ppm and 6.0pH - 4L Mar 10/21, Day 33 - Middle of the week and just giving some enzymes today - Enzymes – 1.5ml - 300ppm and 6.1pH - 4L Mar 11/21, Day 34 - Microbes again today - Tap water with Jet Fuel – 1ml, Terpinator – 2ml, Nature’s Candy – 1.5ml, Rezin – 1ml, Ultimate B+ - 0.5ml, Recharge – 1tsp/gal - 800ppm and 6.0pH - 4L Mar 12/21, Day 35 - Dry out day - Been feed a couple of times this week so work with ¾ strength next week.
Likes
13
Share
25th April day 46 4 plants stripped I will give them a few days to recover and flip to the 12/12 cycle
Likes
11
Share
@Budhunter
Follow
Harvest on day 91 of cycle , day 54 of flowering.. I could leave it few days more for sure however my ladt harvest is nearly finishing so I need to dry this plant as soon as possible hehehe.. Purple punch has really frosty buds, it didn’t grow as much as I wish(I had to move the plant to the toilet with my burple light as there was no space for 3 plants in my 2x4 tent) but they are looking insanely good, with a strong flavor of grape, I am impressed with this smell/flavour, all covered in trichomes, I can’t wait to smoke it.. So my way to harvest it is I cut it down on the main branch and hang to dry out.. all the plant .. I prefer dry trim because it’s way easier to trim.. so now I am gonna hang it for 2/3 weeks and then start trimming.. I will update yield and tasty as soon as I finish trimming.. Overall I am happy with the results 🙌🏼.
Processing
Likes
16
Share
@Max1973
Follow
Day 52 - before pic/vid pulled em both out scrubbed tanks..... moved em into a different tent, with a different light.... did up completely different solutions, and currently still building it all.... Day 53 - still buildin... vids of new home... Nutrifield, Rock Nitro, 1200-1500 ppm and 6.5 PH.... see if we can give em a good boost.... left em in pure water before puttin em in new solution.... Day 57 - pics vid.... been adjusting ph... down to 5.8.... they are just growin along nicely in the new home... got a fan for the tent... looks good tho... solution temp is abit high, fan will fix that..... changed just the tanks to 5lt Cereal containers, they are alot taller, more room below the container... fits perfect.... Day 59 - pics vids, , 6.2ph, 1300ppm ... water temps been getting abit high, fans should arrive next week.... 👍😎 120W Aluminum+PC Plug 2835SMD 7995-9594LM 1131Pcs Red+234Pcs Blue * Blue(wavelength: 430nm, 554nm * Red(wavelength: 630nm 660nm)