Likes
Comments
Share
@Random80
Follow
I smell trouble :/ well, actually the smell changed dramaticaly and I was overwelmed after opening the tent. But the trouble I smell are brown spots on the leafes that appeared on few more places. Maybe fungi? Did some googling and now I am not sure of anything :/ Other than that she seems healthy and is only affected on few places so I am not going to change anything in fertilizing for now. However I did took some steps...more defoliation to increase air streaming trough center of the plant, increased fan speed, disconect from autopot and dry out the root, took away (hopefully) all of the affected leafs. She was given 8ml of BIO PK5-8 together with 4ml of orgatrex diluted in 2 lit of water. I will keep hand watering her with orgatrex only during next 2 days before I need to leave again. Could that be lack of nutrientes as I am acctually keeping her in autopots most of the time?
Likes
46
Share
@Roberts
Follow
Drunken bitch Slap is growing good under the Hortibloom Solux 350. I pruned her roots and also did some lst on her. I accidentally broke a branch while lst ing her. I propped it back in place, and hopefully it heals if not I will ben the other two closer that way to close the gap. I have added nothing, but water since start. My nutrition mix was a bit strong in the start up. Everything has been good with this plant so far. Thank you Aeque Genetics, and Hortibloom. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
16
Share
The cannabis plant is generally growing well and is progressing as expected during the flowering stage. Despite the positive overall growth, brown spots have appeared on some of the leaves and I dont really know what it is. While the appearance of brown spots is concerning, the overall health of the cannabis plant remains good. With careful monitoring and appropriate adjustments, the plant should continue to develop successfully. It will be exciting to see how the plant progresses as it matures, even if its growth rate is somewhat slower than expected.
Likes
53
Share
! this is my current status, gonna upload my last veg weeks within the next week - got a bit busy around Spannabis - thank you for your understanding! 💚 Welcome to Bud Boutique Grow Diary - really appreciate all your love and support :) Dont forget to check out my other current grows! 🗓️ This Week: after 48 hours of complete darkness (important for seedlings to make sure all plants switch into flower same time), I finally switched my lights to the 12/12 schedule and sent my ladies into the flower. - both Phenos super strong and praying up, - more than healthy and going well, just one of them needs a little more water and attention than the other ;) - Day 3: Foliar spray with APTUS Regulator and APTUS Nutrispray to give them extra micronutrients and give them a little shell for protection. ! always use APTUS Regulator first and mix well with your water before adding any other nutrients for Feeding or Foliar! Thank you for still staying with me 💚 ___________________________________________ --- 🌱 Strain (Sponsor) --- 🏷️ P.C.R. by Art Genetix https://www.artgenetix.world/product-page/p-c-r --- 🥗 Nutrients and Feeding (sponsored by APTUS: APTUS Ambassador) --- 🍸 APTUS: full nutrient schedule extreme -- Regulator, N-Boost, P-Boost, CaMg-Boost, K-Boost, Allin1 Liquid, Startbooster, Topbooster, Enzym+ every feeding -- Fulvic-Blast, NutriSpray as Foliar each once a week 🔗 https://aptus-holland.com/ --- ♻️ Grow Control (Sponsor) --- TROLMASTER: TENT-X + LM14 Light Adapter to dim/sunrise/sunset lights + Temp & rH Sensor all remote on App 🔗 https://www.trolmaster.eu/ --- 🏭 Grow Setup --- 💡LUMATEK Zeus Pro 600 * 🏠🌿 Indoor: Homebox 120x120x200cm (4x4) * 📐🌀 PrimaKlima exhausting Fan 1180m3/h (running on 60-80%) * 🌀 Can Light Filter 800m3/h & 1x Fanbox 1x Dyson fan for Air circulation 🔗 https://lumatek-lighting.com/zeus-600w-pro-29/ 🔗 https://primaklima.com/de/shop/ventilatoren-de/ec-ventilatoren/pk160ec-tc/ 🔗 https://canfilters.com/products/filters/ All Likes and comments are highly appreciated!!! 👨‍🌾 don't forget to check out my Instagram for daily educational content: budboutiquee - Bud Boutique
Likes
3
Share
@ASCBOOGS
Follow
4 plants harvested of Gushers the smell & smoke is insane 12oz total dry
Likes
6
Share
@NeoCat
Follow
Wow, she's looking great! Trichomes are clear and cloudy - checked with 200x microscope. One week of feeding with dragon force, then a flush and I think the trichomes should be a good mix of cloudy and yellow 👍 The smell is great and the buds are very sticky.
Likes
51
Share
@Corwinism
Follow
WEEK 9 - (04/25/2021 - 05/01/2021) Day 67 (Week 1, Day 1 - FLOWER): 04/25/2021 Today marks the first official day of the flower cycle. Light timer has been adjusted to 12/12. First 12 hour dark period begins at 5 a.m. on the morning of 04/26. I would say 70-75% of the first screen has been filled. ½ strength nutrient feeding today. Tap water: 220ppm, 8.2 pH, 70℉ + FF Grow Big: 5ml/gallon = 45ml/9 gallons + FF Big Bloom: 7.5ml/gallon = 75.5ml/9 gallons + FF Tiger Bloom: 5ml/gallon = 45ml/9 gallons + FF Cal-Mag: 2.5ml/gallon = 22.5ml/9 gallons + Fish Shit: 2ml/gallon = 18ml/9 gallons + HydroGuard: 1ml/gallon = 9ml/9 gallons + pH Down: 14ml (6.5 pH before adding) Mixture: 910ppm, 6.1 pH, 70℉ ppm/ppm = runoff/soil JB#1 - 1510ppm/600ppm, 5.8 pH JB#2 - 1530ppm/620ppm, 5.7 pH AP#1 - 2500ppm/1590ppm, 5.7 pH AP#2 - 2260ppm/1350ppm, 5.8 pH GC#1 - 2490ppm/1580ppm, 5.8 pH GC#2 - 2510ppm/1600ppm, 5.7 pH ------------------------------------------------------------------------------------------------------------------------------------------- Day 71 (Week 1, Day 5 - FLOWER): 04/29/2021 Watered plants today. Glookies #1 gave off a really high ppm reading. Don’t think it was accurate. Tap water: 220ppm, 8.7 pH + HydroGuard: 1ml/gallon = 9ml/9 gallons + pH Down: 28ml Mixture: 230ppm, 6.2 pH, 68℉ ppm/ppm = runoff/soil JB#1: 1320ppm/1090ppm, 6.7 pH JB#2: 1115ppm/885ppm, 6.5 pH GC#1: 3540ppm (seems too high) GC#2: 2270ppm/2040ppm, pH 6.5 AP#1: 2410ppm/2180ppm, 6.4 pH AP#2: 1600ppm/1370ppm, pH 6.6 Well, the first week of flower is in the books. All but one plant is starting to grow pistils. These plants are getting a little out of control being cramped in this 4x4. I defoliated just before flipping to flower, and they needed another touch-up. I'm a little worried this will cause me to have to do frequent touch-ups or kill one or two plants and create some space. I'm leaning more toward killing 1 or 2 plants, rather than risk all of them getting overly stressed from too many defoliations. I completely underestimated how much these Cannabis plants would grow, especially once they started to stretch. I'm going to start saving the water that is collected through the dehumidifier. The plan is to use this water for the flush in the last 2 weeks of flower. Thanks for dropping in and showing some Aloha, everybody. And remember, don't drink and drive, smoke and fly. See you next week. 🙏
Likes
5
Share
Esta semana ya estamos en plena floración, así que eliminamos Bio Vega y doblamos la dosis de Bio Flores. Realizamos una segunda poda baja de toda la sala. La potencia de las luminarias LazerLite Pro 720w la ajustamos al 100%. En fase nocturna no conectamos los calefactores, ya que queremos que pasen algo de frío controlado.
Likes
2
Share
Update week 2 of Bloom
Likes
64
Share
The 6 plants came out of the ground and look good 😎 In my 2 previous growths, I had better result with 24h of light on the first week compared to 18h, so I tried this schedule again and it seems to work. The plants are stretching as usual, maybe due to my soil being too rich in nitrogen. I added a wet towel to increase the humidity. 2 out of 3 of the extra seeds developped nicely. Great seeds, especially after one year in the fridge👍 Plants heights at the end of the week : ------------------------------------------- Gorilla Cookies 1 : 10.5cm Gorilla Cookies 2 : 11.5cm Purple Lemonade 1 : 8.5cm Purple Lemonade 2 : 10cm Wedding Cheesecake 1 : 8.5cm Wedding Cheesecake 2 : 9.5cm
Likes
17
Share
Hi meine lieben, 🤗 Die 2. Woche der Wachstums-Phase steht an... ...und die realität schlägt zu. Hatte versucht diesen Run mit einem höheren VPD-Wert und dadurch ohne zusätzliches CalMag hinzufügen zumüssen, laufen zulassen. Da laut einer Studie, man durch einen erhöhten VPD, kein zusätzliches CalMag unter LED's hinzugefügt werden müsste. Allerdings gieße ich noch mit Leitungswasser. Also hatte ich mir mal die werte meiner Stadtwerke angeschaut. Und in meinem Wasser habe ich Calcium = 78 mg/l und Magnesium = 5,3 mg/l und somit ein verhältnis von 14:1😰. Was von einer Optimalen versorgung von 2:1 - 4:1 CalMag etwas entfernt ist... 😅 Beste Lösung wäre ein Filtersystem wie der Watertrim zu nutzen. Günstiger ist es Mono-Magnesium (oder bei bedarf Mono-Calcium) zu besorgen und das Wasser im richtigen Verhältnis auszugleichen. _________________________________________________________ Optimale CalMag-Versorgung in den einzelnen Phasen: Sämling: Cal: 50-60 mg/l Mag: 20-30 mg/l Wachstum: Cal: 80-100 mg/l Mag: 30-50mg/l Blüte: Cal: 100-120 mg/l Mag: 40-60mg/l ______________________________________________________________ Wie mein Ablauf in dieser Woche genau aussah, habe ich auch diesmal für uns Dokumentiert. Ich wünsche dir viel Spaß & Happy Growing 🌱🤗: _______________________________________________________________ Umgebungswerte der Woche: - Temperatur: 25°C - Luftfeuchtigkeit: 65% - VDP (Room): 1,1 _______________________________________________________________ Tag 8: - Nur beobachtet 😋 Tag 9: - Pflanzenhöhe gemessen: 17 cm 🌱 - Stamm-Durchmesser gemessen: 0,57cm = 5,7mm Ø - Licht Intensität eingestellt - PPFD: 320µmol / DLI: 21 Mol Tag 10: Bewässert 👇 (Leitungswasser): - Volumen: 1000ml - PH-Wert: 6,15 - EC-Wert: 0,46 - Temperatur: 20°C Run-Off (Drain) gemessen 👇: - PH-Wert: 7,0 - EC-Wert: 3,7 - Temperatur: 21°C - Volumen: 150ml Tag 11: - Nur beobachtet 😋 Tag 12: Bewässert 👇 (Leitungswasser): - Volumen: 1200ml - PH-Wert: 6,1 - EC-Wert: 1,52 - Temperatur: 20°C Run-Off (Drain) gemessen 👇: - PH-Wert: 6,7 - EC-Wert: 3,24 - Temperatur: 22°C - Volumen: 265ml Pflanzen Training: Topping, Vor-Lollipopping Lampenabstand eingestellt: 50cm Licht Intensität eingestellt - PAR - PPFD: 285µmol / DLI: 18,5 Mol Pflanzenhöhe gemessen: 18cm 🌱 Tag 13: - Nur beobachtet 😋 Tag 14: Bewässert 👇 (Leitungswasser): - Volumen: 1200ml - PH-Wert: 6,1 - EC-Wert: 0,48 - Temperatur: 21°C Run-Off (Drain) gemessen 👇: - PH-Wert: 6,42 - EC-Wert: 2,6 - Temperatur: 21°C - Volumen: 360ml Pflanzenhöhe gemessen: 22 cm 🌱 Stamm-Durchmesser gemessen: 0,73cm = 7,3mm Ø Lampenabstand eingestellt: 45 cm Licht Intensität eingestellt - PPFD: 320µmol / DLI: 20,8 Mol
Likes
17
Share
😲😳 wow!!! Is this strain something to behold, absolutely gorgeous to look at, such a exotic smell it's like a sweet cream cake with lemon frosting topped with fresh cracked pepper all while surrounded by fresh cut pine aroma. I have 2 phenotypes I have dubbed the Stinker and Sister Stretchy. The stinker suffered a severe lock out at the beginning of flower so she's at least 2 weeks behind. Sister stretchy is begging to be harvested. I still have almost another week of flowering according to the breeder but :(, after my routine inspection of her trichomes on the caylx' and buds not the sugar leaves I found myself looking at a forest of tricomes that went from 80%cloudy with remaining amber. Today's inspection with a 60× jewelers loop revealed a surprising half of the trichomes cloudy with the rest amber. So it is any day now 😃. Can't wait because it's gonna be some fire ass bud.
Likes
9
Share
@Chucky324
Follow
Hello This is the end of week 4 and the beginning of week 5 of flowering. The plant is doing well and I see the resin has started to flow. I can defiantly smell the sweet diesel off it. But it has fruity hints too. Could be strawberry. The plant has a bit of red on the stem and leaf stems... so we might see some color at harvest... We'll see... OK. Be Great. Chucky.
Likes
83
Share
@Grey_Wolf
Follow
Chance Of A Lifetime Greenhouse seeds Wonder Pie Week six 12th June 2020 Welcome back , Well aprox 6 days have passed since I flipped the lighting schedule to 12/12 and they are starting to flower 👌 I was planning on vegging them longer but I decided that I didn't want to risk them stretching too much as they only have 70cm between them and the top of the tent . Never mind I am still happy with the way my tent is filling up with the three girls and another plant I already had running. Because I had already added enough Bio Grow to veg for an extra week or so , and the plants seem to be growing just fine with water I will not add the Bio Bloom until the end of Next week . I am due to feed them with the enhancer again so I think that should see them thru the initial stretch and flowering nicely 👍 During this week I had to do a few alterations to the plants using LST and soft wire. My main aim is to keep training each plant so that it fills in as much of the area around it as possible thus not wasting any room if possible . Because I am using a living soil mix I occasionly need to "feed" it too , but incase I was breaking any rules regarding the competition I wanted to clarify whether worm castings and worm tea made with molasses was allowed. Luckily I was informed recently that Yes it is ok so some time next week I will also add some fresh worm tea and a handful of castings to each plant. I am super impressed with the uniformity of this strain as all three of mine look almost identical to a lot of the other Wonder pie diaries I have been following, this means that the strain is homozygous and will no doubt produce a similiar result each time it is grown. Kudo's to Arjan and his team @Greenhouseseedco Well that is about all for this weeks update , please leave a like & Thankyou for stopping by 👍
Likes
5
Share
@Ninefold
Follow
I'm afraid the Raspberry Pi's time got reset somehow resulting in the timelapse being taken mostly at night rather than during the day, which means there aren't a lot of usable photo's :(.
Likes
29
Share
In week 10 I have some plants, which have grown taller than the rest (canopy is appr. 80 cm high now). In order to not have to raise my lamp, I rather correct their height by 'supercropping' them. Supercropping is a technique developed by SOMA from SOMA_seeds and works VERY WELL. Instead of topping your plants (=cutting off the main stem) it is better to take the main stem between your fingers (appr. 15-20 cm form the top) and brake the fibers inside and then bend it downwords. This way the stem will stay intact and heal itself and you dont loose the main buds growing on it later. In the video above I show and explain how I supercrop a plant. The plants are now getting more and more into flowering and therefore I switch the dimmer on my SANlight EVO4-120 plants to 100% now (see in video above). The BIO NOVA nutrients are increased as well a little bit, so the plants can build big buds.