Gracias al equipo de Royal Queen Seeds y MarshHydro, sin ellos no sería posible esta hazaña 💐 🍁 Wedding Cake! Este potente híbrido de dominancia índica ofrece un perfil de terpenos difícil de encontrar. Disfruta de intensas notas azucaradas acompañadas de impresionantes niveles de THC. Procura tener la agenda libre el resto del día para disfrutar al máximo de las propiedades eufóricas y del colocón de esta encantadora dama. Tierra. Hierbas. Dulzura. Cada calada de estos cogollos te hará querer más y más. La Wedding Cake sabe muy rica en porros y bongs, pero en vaporizador te harás una idea real de lo que pueden llegar a ofrecer. A medida que el sabor acaricia la lengua, su 23% de THC se asienta rápidamente, ejerciendo un potente subidón que relaja el cuerpo y anima la mente. 🌻 🚀 Consigue aquí tus semillas: CODIGO 20% DESCUENTO: GROWERS20 https://www.royalqueenseeds.es/semillas-feminizadas-de-marihuana/628-wedding-cake.html 💡 Mars Hydro TS 3000, como la lámpara de cultivo LED más grande de la serie TS, ofrece suficiente cobertura para un área de 4 × 4 pies con un precio asequible y rendimientos de calidad; a cambio, se puede aplicar tanto al cultivo doméstico como al cultivo comercial. Potencia - 450w Cobertura Vegetal – 5×5 pies Cobertura de flores - 4 × 4 pies La opción abrumadora para la mayoría de los productores que la aplican en tiendas de campaña. Consigue aqui tu lámpara: https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 📆 Semana 9: Finalizando este diario, esto va que vuela 😍, la resina esta cada vez mas presente ❄️ comienzan a madurar Esta semana estará el TS-3000 de MarshHydro al 80% y 30cm de distancia. Se estan desarrollando mejor que nunca, con una floracion mucho mas rapida y fromdosa, noto una gran mejoria gracias al Marshydro TS-3000. Continuo con defoliaciones A partir de ahora solo agua

Week two and healthy

Flowering day 7 since time change to 12/12 h. Hey guys :-) The flowering started last week because otherwise the space in the small tent would end up being too narrow :-) Cuttings were taken from each phenotype beforehand. To change the flower, I rinsed it very lightly with clean fruits. With the next watering she gets a mix of grow liquid and bloom liquid before she only gets bloom. The heating mat works perfectly in the small tent and the parameters are all in the optimal range 🙏🏻👍. Now we hope that everything stays that way and that the cold days will slowly pass :-) . Everything was cleaned and checked. have fun and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.ripperseeds.com/en/feminized/kmintz-feminized-cannabis-seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

well, it's exactly 12 weeks :) and my house is full of lemon aroma :) the girl endured really difficult growth, but she coped with everything perfectly :) who followed the growth, you saw that she grew on the balcony for 10 weeks, and she spent the last 2 in the grow tent :) 500 gr wet weight !!!!:) , before putting it in the ground I expected less than 10 g dry yield :D then this growth turned out super well, if it wasn't for my vacation I would have let it grow for about 2 weeks I think. but everything is still very good, I'll go home, fix it and do a smoke review :).

In the first week after switching to a 12/12 light cycle, the plant appears healthy and hasn't shown rapid growth yet, but its green mass is increasing rapidly 🌱. All seems promising for the flowering phase ahead! 😊

Day 56 Smell is super loud and still way to go.... A/C arrived and saved the day... from 34cº to 27cº during light cicle and down to 24cº on night cicle i must say that the terpens from interchillactic , mephisto genetics.. is one of my favourites so far from all i had.... hands down top 1 for me plants are drinkin like MF from 2 to 3 liters a day.. gettin bigger buds and the patience game just started.. 😁😁

The plant responded well to topping. There is a pencil shape to her, both tops very close together, so I used the clips to LST them in a move constructive direction. Considering she is 3 days older than my Northern Lights, it's quite astonishing for me to see the differences between them. I also went ahead and topped the two tops again. This time by rolling the centre heart out. Thereby eliminating the stress. I want to give her the best chance against my Northern Lights, as she has 7 tops now. Watering with Ecothrive Biosys: .5g/2 litres. I water 2 litres of dechlorinated water PH'd to 6.4, whenever the pot dries out. Usually about 3-4 days. Looking good, if a little strange. Thanks for hanging out 🍃 ✌️ 💚 🙂

Noch 1 Woche gebe ich der Pflanze, dann Flash Clean und Final Part von Terra Aquatica. Alles läuft fantastisch, hatte bis dato keinerlei Probleme mit der Genetik, auf Dutch Passion ist halt Verlass!

i gave 1ml/l bloom booster but the ph kept rising to 6.7 i couldnt bring it down for longer then 1 hour. so now its back to micro/bloom also added calmag the buds are getting bigger now

not all the ladys are drom the same time 5 are 2 weeks ahead 1is West coast OG auro and all 10are Amnesia haze auto,

They're settling in to the pots nicely and the flower tent is about to be cleared out. Need to do some work around the tent before I can move them should be a week or 2.

Hello everyone. A week has passed and the 2 plants in the front are going into the second week of 12/12 while the amnesia in the back is going into the third week. Everything is going to plan temperature and humidity is good for now. Thanks for stopping by and have a nice week.

Easy week, lowered my PPM feeds to 350ish (6.9ph), runoff is slightly higher at 390(6.6ph) I have decreased the temperature to the space a few more degrees, night time temperatures as low as 56 degrees but generally around 57-58 degrees farenheit. The plant is starting to show alot of signs for the final weeks of flowering. Sugar leaves yellowing at bottom foliage, the foliage exposed to the light is turning blueish, purplish, blackish sugar leaves. Only 1 plant is showing the color changes, I assume the other plant is a phenotype with different percentages.

Em atualização

Flower Week 6 Day 42 to 48 - 4/29 to 5/5 They both look very healthy this week. The calyx are swelling with maturing hairs, the pistols are orange, the trichomes are mostly white, and the leaves are fading/changing colors - still not ripe enough for me, but flushing with half nute feeds now. Feed this week was another auto pot reservoir flush feed at 400ppm total before add-ins. I used 400ppm of Bloom concentrate mix (recipe week 5). And then, I also added 1ml/gal of CaliMagic (General Hydroponics 1-0-0). PH balance this week was for 5.8 where I plan to maintain it until harvest. Next week will continue the same half nute feed. I will continue to monitor the signs of trichomes, pistols, and calyx for a better harvest and allow the buds to mature more.

This was a fun project that was a few years in the making and a year later to see if they would last a season for this upload to happen. Before any of this I would bike aorund town grabbing up all the old Ikea solid pine bed slats that I could find and storing them in the basement. I have a lot of wood down there, any size worked as long as I have enough of them. The hot days to find them were the first and last of the months because that's when people where moving in/out. I also kept an eye on the free section on local online classifieds as well. The entire purpose of this was to recycle as much off the streets as I could before buying anything to finalize the project. In the end I only bought sealer, screws and some takeaway/beers. All the wood was 100% free and salvaged off the streets of Toronto saving it from the dumpster bin. After collecting all the slats for about 2 years I was playing aorund with them on how I wanted to make this work. I had previously done a little project like this before but I messed it up and the boxes where crap. did not last longer then 2 seasons, they where thin and shallow as well could not grow much of anything in them. I Was talking to my friend who is renovating their house and we brainstormed some ideas on the boxes, I found some designs I liked online and said lets make something like this out of what I have here. We tossed out a few of the design features when looking at them as it would have been wasted wood and extra work not needed. If I had more wood them maybe it could have been an option but simple was the name of the game. They taught me what I needed to know like how the miter saw and sander worked, plus all the other tools I was using. They did help out with a table saw and creating the triangle support joints in the corners, They used some pine left overs they had while making a staircase indoors. I did not feel up to the task of using a table saw given all the relatives I know who have lost a finger to them. In the end we decided the design would be three boards high and take an alternating pattern on corners. layer one short, layer 2 long, layer 3 short. Went with a galvanized and painted deck screw so it can take the weathering. Ran into some problems like making everything level as some of the boards were warped and other ones had undesired aspects like knots and tacky sticker goo I could not remove. So I used them for the base that will not been seen so much. Clamped everything down and called it a day. Once it was all done and over with, I then brought them back home from my buddies work garage and started to seal them. I went with a boiled linseed oil as its a food safe option should the wood degrade into the soil I will plant in them. I will need to reapply it to the boxes year after year but the main coat is the most important one and I put it on 3 layers with a good dry in between coats. the inside of the boxes that where coated did not degrade at all as the sun did not hit them so it will not need a new coat just the outside. Overall the end result was very impressive for myself, I've never taken a woodworking class ever and It was a near perfect outcome for me. Heavy Duty Planter Boxes for all my gardening needs. I made a last min decision to add in a plastic liner to preserve the wood even longer and stapled that into the frame. it has held up quite well and may need replacing end of 2nd or 3rd year out in the sun. Used a thick moisture wrap plastic with UV protectors in its formula. Lets see what I can grow in them this year! m0use's haus of projects - garden box edition

Yall see the yellowing of the leaves closest to the top? I've since switched my nutes over to Tiger Bloom and I've thrown in some Cal-mag into the mix. They'd gotten kinda droopy but since I changed their nutes up a bit, they've been perky af even tonight as it's getting close to lights out. I switched them over to flower on Sunday. They're already starting to stretch in just a few days which tells me that they're feeling much better. My last video... even though it's not loaded correctly is from tonight. It's 11pm, lights are out in an hour and they're still perky. Love it!! 😍😍😍 4/6/23: Yall.... the plant in the back right hermied!!! OMFG. The 2 tallest branches had seeds on them... just popped up because they weren't there yesterday or at least I didn't notice. The seeds were concentrated at the top, I didn't find any on the rest of the plant but with as bushy as they are, there may be more. I cut those 2 tallest branches down to below where the seeds were but I will be watching that plant and the rest like a hawk for more seeds. I didn't find any on the other 3 plants but still I'm saddened. Unsure of why this one plant is hermie'ing. Smh

So, day 65 of the 🔅Root66 auto project🔅 and this is the last update before harvest: ❎- GSC (2) are the only plants that didn't make it so we didn't defol --> 15-20 days late. Strong plants, high ppm feeding --> no probs at all.[Same phenos]. ☑️- Cream mandarine xl (4) more than a week (10 days) before maturity. Besides that CMxl is a great yielder, tall plant with light brunches. Average ppm needed. ✅- Jack 47 (4) 5 days before maturity but that's enough for these Jacks to pass the test. Smell is unique (pineapple), no stress probs, really dwarf plants.[Same phenos]. ✅- Gorilla Glue (2) pass the test and ready for harvest. Not what I really expected, average yield,growth etc. ✅- Fast berry (3) pass the 66 project. We had 2 phenos (2 green and 1 purple), beautiful plants with great aromas. Nitrogen issues, don't overfeed. ✅- Crystal Meth (3) pass the test from day 60🤯, 2 phenos. We experimented with these. The green one (with a little purple inside) had a topping and is already mature one week before the end of the project, purple #1 just defol and purple #2 supercroping. A really fast strain, good yield n hungry.