i'm in love with this grow. I'm also drunk! good pics and druken videos. I love fastbuds/ Fastubds is life!

Happy Mother’s Day. 5/13 Getting weird like bright neon orange pistils. I personally think it’s way too early to have pistils changing colors already. 5/16 fairly certain it was wind burn. My humidity was jacking up and my fan was trying to compensate. Changed settings and we should be golden now. Plant is frosting up hella already. I think there’s more frost than there are pistils 5/18 day 20 of flowering. Last day of week 2

Day 70: Want to know how the trichomes are looking on my OG Kush, they look pretty clear to me but not 100%🤷‍♂️🏼 any feedback would be great, this OG is about 10 weeks old from seed, there was some temp issues, and nutrients locks but still going strong I believe.

To be edited

08/30/2021 - Noticing more gnats than usual. Could be overwatering, anaerobic soil conditions, or both. - Going to set up fly traps, starve both the plant and the gnats of water for about a week. - Will observe any stress responses due to an extended dry period.

Week six! Pre-flowering stage! The plant continues to grow very wel, apparently it will have a very good flowering, I'm spraying colloidal silver on one of the lower branches in order to get some pollen, I have other bananas to pollinate.

All the plants are absolutely covered in trichomes right now ❄️🌿 It’s getting exciting! RS11 — One of the phenos seems to be a fast one ⏳🔥. The buds are already chunky and it really looks like it will finish earlier than the rest. Another RS11 shows classic sativa traits — small buds, spaced out, but wow… trichomes everywhere 😳✨ Monkey Grease — No drama, no stress. This one has been on autopilot from day one 🚀🙌. Looks like it will be one of the first to finish! Cherry Dream — Recovery in progress and it’s showing 🌱💧. The buds are turning back to a healthy green and they’re swelling nicely now. Seems like that mini flush did the trick. Amnesi-K Lemon — I’m pretty sure I’m going to love this strain 🍋💚. The buds are fattening beautifully and look super juicy. Apple and Bananas — Especially one of the two plants is showing amazing structure and frost 🍎🍌✨. Everything is moving strong and steady. If I had to guess which plants will finish first… it’s probably Monkey Grease and one of the RS11 phenos 🥇✂️🔥

She’s been in flush around 15 Days now, nothing super heavy. Lower leaves starting to fade slightly and she’s still fattening up. Will let her start to fade before I decide on doing anything at all. Her trichomes are mainly cloudy with an amber here and there.

E arrivata alla fine. È ora di taglia

Welcome back This week i did some more LST as you can see, Gave them water with enzymen and gave them water with nutrients. They grew a little but not that much. I really want to repot them but the outside temperature is still 12-15 degrees at night so i don't want to do that. The plant i didn't want to keep has been outside for a week now, gladly it still grows but not that fast as the other ones so i was right to not put them outside yet. I will keep an eye on the outside plant if it still wants to grow for another 1-2weeks, if she does, i might put all the plants outside and risk it. Why? Because the plants already start to stretch futher away then the size of the pots, i dont like that. Also if they have more space to root, the plants will grow faster and bigger. The color of the leafs look a little light but that because they are in full sun light. They are perfectly green in my opinion and so far no burned tips so my feeding goes well. They start to drink more as well. I will spray them again today when the sun goes down with Canna Cure! I can't say it enough how much i like the product, it keeps insects and molts away and even keeps my leafs nicely green. ps, when i bended the brances after topping a few weeks ago, i didn't kept the upper brance for a few centimeters intact, most of the times i do that( to give it more support) but this time i decided not to, just to see what happens. Well indeed you get some cuts into your brances, but when you are carefull you will be fine and you get really strong brances from it, therefore i like it this way. Enjoy :)

Two low branch broke off due to wind and stem wasnt stong enough for weight of the buds....other than that just a handful or two of defoliation every two day or so....makes trimming ez lol

🌸🍭✨🍬🌈🍭✨🍬🌸🍭✨🍬🌈 Hi and welcome to a first @KanOrganics run! This time I’m running Fantasy Feast (6x regular seeds). Gonna veg them under 24hr light with a mix of LST and topping — might let one go wild for fun. Still prepping the tent, need to transplant all my tomatoe and paprika plants to free up some pots, gonna sow tomorrow (14.04.25) 🌸🍭✨🍬🌈🍭✨🍬🌸🍭✨🍬🌈 💭❗💭❗💭❗💭❗💭❗💭❗💭 ❗Events & thoughts worth noting❗ 💭❗💭❗💭❗💭❗💭❗💭❗💭 12.04.25 (GW1) Cleaning old coco coir & prepping pots. Might need to hydrate extra bricks. This is how I recycle my coco coir — fast, cheap, no BS. 🌿 Harvest plant ✂️ Chop roots small — they stay in for structure (organic perlite) 💦 Hot water rinse — remove salts & dust 🍶 Pre-soak with light feed: Micro 10ml Grow 0ml Bloom 0ml GreenBuzz 10ml Cal-Mag 60ml FPJ 10ml pH down (citric acid) ♻️ Media stays — Roots stay — Back in service. 14.04.25 (GW1) Sow 6x Fantasy Feast ✅ 16.04.25 (GW1) did final tent clean up and all set up now ✅📸📸📸 18.04 25 (GW1) All 6 germinated 🎉👌♥️📸 🙏@resi_max 26.04.25 (VW1) using the new Batch of FPJ/FFJ https://growdiaries.com/diaries/266849-grow-journal-by-yan402 00.04.25 (?W?) Transplant to...WIP, ✅ 04.05.25 (VW3) Topped all of them to the same size except #4 which probably won’t make it. #5 is showing classic small pot symptoms, all 6 are droopy so left them to dry a bit,I overwatered them apparently, I'll be repoting tomorrow in bigger pots probably 9l, *repoted in 11l pots✅ 30.04.25 (VW2) – Increased TriPartMicro & GreenBuzzBloom 10ml → 15ml 03.05.25 (VW2) – Increased TriPartMicro again 15ml → 20ml 13.05.25 VW4 Increased TriPartMicro to 30ml and GreenBuzzBloom to 20ml. 24.05.25 VW6 increased GreenBuzzBloom to 30ml 01.06.25 VW7 At least 4 are female 🎉🥂 by next week I'll be choosing 2 or 4 to finish off. 05.06.25 VW7 Did a cleanup 📸📸 10.06.25 VW8 kept #1-4, #5 and #6 are going to the balcony with a new diary📸📸 14.06.25 VW8 did a cleanup HST session 📸📸 (VW9) 21.06.25 VW9 Switched lighting to 12 hours. 28.06.25 VW10 Girls a stretching nicely and are eager to show their pistils. 29.06.25 VW11 increased GreenBuzzBloom 30→ 60ml 06.07.25 FW1 TriPart Micro: 50→ 30ml TriPart Bloom: 0 → 20ml Home-made FFJ/FPJ (Watermelon + Pumpkin): 10 → 30ml 12.07.25 FW1 GreenBuzzBloom 60 →40ml, TriPart Bloom: 20 → 40ml, fpj 30→60ml 💭❗💭❗💭❗💭❗💭❗💭❗💭 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 🌿 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 11.07.25 FW1 – Fed 3l of #1 → 1.5l runoff 12.07.25 FW2 – Fed 3l of #1 → 1.5l runoff (*runoff reused for tomato plants) 🌱💦🌱💦🌱💦🌱💦🌱💦🌱🌱💦🌱 🍶💧🍶💧🍶💧🍶💧🍶 💧 Nutrients in 30L #1 – Week 2 flower 🍶💧🍶💧🍶💧🍶💧🍶 💧 TriPart Micro: 10 → 15 → 20 → 30 → 40 → 50ml → 30ml (1.00ml/L) 🍶 TriPart Grow: 0ml (0.00ml/L) 💧 TriPart Bloom: 0 → 20 → 60ml (2.00ml/L) 🍶 GreenBuzz Bloom: 10 → 15 → 20 → 30 → 60→40ml (1.33ml/L) ← ✅ increased 💧 Cal-Mag: 60ml (2.00ml/L) 🍶 Home-made FFJ/FPJ (new batch): 10ml → 60ml (2.00ml/L) 💧 pH Down: Citric acid (buxXtrade) 📦 TOTAL: 30+0+60+40+60+60 = 250ml per 30L 🔬 8.33ml/L 🍶💧🍶💧🍶💧🍶💧🍶 ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️Tools & equipment✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ 2× MarsHydro SP3000 ⚙️ MarsHydro 150mm ACF Ventilator ✂️ Trotec dehumidifier (big unit) ⚙️ Mini no-name dehumidifier ✂️ Kebab skewers (LST – stainless) ⚙️ Wire + roast skewers (LST assist) ✂️ Scissors (HST) ⚙️ Vacuum (for spills & cleanup) ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ 🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 🦄Fantasy Feast(@resi_max Seeds)🦄 🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 Species: Hybrid (Regular) Genetics: The mother is Unicorn Whip by Dirty Bird Genetics. The father is Charcuterie by Cannarado Genetics. Effect: Unknown WIP Flavor: Unknown WIP Flowering: Estimated 8–10 weeks Resistance: Unknown — Testing phase Notes: Expect weird phenos, candy terps, possible outliers

Everything looking really good. Couple more day then switching to 12/12 with 2 weeks of half strength veg / bloom nutrients. Plenty of height left for the final stretch .

This plant was germinated along side three other strains , it stayed short and compact ,it was very leafy and compact . If I was to grow it again I would spread and thin out the canopy and defoliate more heavily . This strain was in a10 litre pot and produced 90g of dried trimmed bud . It was a low producer but the flower is really nice , a very enjoyable evening flower through a volcano vaporizer.

Привет садоводы цветок вырос красивый еще недельки 3 и будет готов бутоны поднабухли и стали более морозными запах приятный сладкий

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Always R.O Water Watering the plant 3 times for per week 1st Watering with nutriens. (750 ppm) 27.03.2023) 4 liter 2st Watering with nutriens. (750 ppm) 30.03.2023) 4 liter 3st Watering with only R.O water & CalMag. (300 ppm) (01.04.2023) 4 liter 1000 ppfd

The canvas can do miracles, just you wait and see

we continue the run with the slowing down of the stretch and the beginning of the beautiful flowers. This week my EC indicated me some things... It was at 1.8 and went up to 1.9, so I added water to lower the ec to 1.6. When my ec goes back up it tells me that I have enough nutrients in my solution. Now, the ph is back to 1.7, I will add more water to bring it down to 1.5. We can observe on some leaf tips a beginning of over-fattening, this is what I'm talking about above, I'll let you know next week if I lower the ec or if I keep 1.5. I did one last defoliation and it was needed! If you look at my vitals, it's not crazy, 70% humidity at this time of the year can become problematic, so I'm going to take the dehumidifier out and set myself at 55%.