Hey peeps! I have now started lowering the nutrients and the PPM is 1200 on average but I intend on lowering it in the next couple of days in order to start flushing her later next week. She keeps popping out bud sites all over the bottom even though we did trim her in the first couple weeks. I have decided that, when I do harveserst her, i'm going to harveerst her in three stages to maximise the yeild and get that light to the lower small bud sites over the next couple of weeks. Let me know what you think!

The plant looks good. In these days the temperature outside are very cold (about 5 celsius), but in the box there is a electric radiator connected to a control unit (inkbird): every time the temperature goes under 20.7 C the radiator turn on. Yesterday I broke the holding pulley of the lamp😰 so I had to hold it with a wire. it will remain that way for 2 days, I've already bought a new pulley from internet. Anyway I defoliated the purple punch to bring the light to the apicals. Every 3 days it puts out new leaf, incredible! I used 10ml of flora grow , 6ml of flora micro (hard water) 5ml of flora bloom and 5 ml of cal-mag directly in the solution edit: I resolved the problem with the lamp. I top up the solution with 10l of water in wich I put 20ml of flora grow, 12ml of flora micro, 6ml of flora bloom and 10ml of cal-mag. I also used 10ml of pH- directly in the solution to lower the level of the pH (6.3-6.4 at the moment). Everything look ok😀

Day 49 - lookin good..... been bending her, trimmin abit, messin with the water solution..... ph and ppm have been all over the place..... lol she's been transitioning from grow to flower, and once she settles into night mode, the solution and growing should stabilize...... the new fan is cool... tents working properly now, neg pressure, drawing in air behind the floor fan, blown around the bottom, and cpu extractor fan pushing the air out the top of the tent, straight into the filter..... really nice way to run a little tent, low airflow........ keeps the impurities out of the buds..... the stalks have all tuffened up since trimmin, and pretty strong now.... should hold the full weight that's about to occur all over the place...... i've simplified the nutrients, they were gettin alittle confusing, so started doin nuets differently, .... so, just making my own nuet solutions, nothing fancy just base amount of normal elements .... should be a pretty good christmas ...... Day 51 - pics/vids... 👍😎

A planta segue bem parou de crescer na última semana e começou a engordar as flores.

🌱 Week 3 – Gorilla Cookies Auto Pheno Hunt Another week down and the differences between the phenos are becoming more obvious every day 👀🔥 The environment stayed very stable this week with temperatures, humidity, and VPD remaining consistent. Because all plants are growing under the exact same conditions, it’s really interesting to see how differently each phenotype develops genetically. 📈 Current observations: Several phenos are already reaching close to 30 cm in height Meanwhile, some smaller phenos — especially Pheno #6 — are still around 13 cm Leaf structure and overall plant shape continue to vary a lot between phenos Growth vigor is clearly different from plant to plant now 💧 Feeding & maintenance: This week the plants received their first proper feeding with around 4 liters of nutrient water. Some phenos seem to react more sensitively to the nutrients, as a few plants are starting to show slight brown leaf tips, so I’ll keep a close eye on them over the next days 👀 I also removed more large fan leaves to improve light penetration and allow the lower branches to develop more evenly. 📊 Current environment: Temperature stable around 26°C Humidity staying between 63–65% VPD maintained around 1.3 kPa Light intensity remaining at 35% Now I’m really curious to see when the first flowering signs will appear 🌸🔥 💬 Which pheno would you pick so far?

2/17/2024 - Vegetation Week 1 Day 1- I removed some of the water to see where the roots were only one had roots in the water. However I want to go ahead and get them on Week one Nutes So I am over 50 gallons of water in the system so I mixed the Trio at a 1.0mil per Gallon but restricted it to a top of 50 gallons period. I top fed the other two to keep encouraging root growth. I also finished my drying and curing from my last run and wanted to show what it looks like all bagged up and in the cannatrol. I added the following Nutes: Silica = .5Mil/Gal= 25Mil CalMag= .75Mil/Gal= 37.5Mil FloraMicro = 1Mil/Gal= 50Mil FloraGro= 1Mil/Gal= 50Mil FLoraBloom= 1Mil/Gal= 50Mil ORCA = .5Mil/Gal= 25Mil EPSOM- 1 big pinch 2/18/2024 - Vegetation Week 1 Day 2- I top fed #1 and #3 since they still don't have roots in the water, I will continue one top feed a day until roots hit water. 2/19/2024 - Vegetation Week 1 Day 3- #3 now has root in the water.. Yay!! I now have #2 and #3 with roots in the water so no top feed for them. I only had to top feed #1 and the only reason I didn't just go ahead and cull her today was I am responsible for breaking her tap root and stunting her, I wasn't careful enough and she was the first to show a good root. In that vain I will carry her a few more day's top feeding but if not root by the end of the week she is getting culled. 2/20/2024 - Vegetation Week 1 Day 4- Today I Ensured the PH is in range, I refilled the Humidifiers, I top fed #1 since the roots are still not in the water. I also removed the humidity shields from #2 and #3 today the ladies were touching the sides so they are done with the extra shields.. 2/21/2024 - Vegetation Week 1 Day 5- Today Morning: I Ensured the PH is in range, I refilled the Humidifiers, I top fed #1 since the roots are still not in the water, Evening: I decided that the roots of the two are looking great so I am going to drain and bump the Nutes to a full Week 1/ Week 2 Nute base. I added 36 Gallons I added the following Nutes: Silica = .5Mil/Gal= 18Mil CalMag= .75Mil/Gal= 27Mil FloraMicro = 3Mil/Gal= 108Mil FloraGro= 2Mil/Gal= 72Mil FLoraBloom= 2Mil/Gal= 72Mil ORCA = .5Mil/Gal= 18Mil 2/22/2024 - Vegetation Week 1 Day 6- Today I Ensured the PH was not too high as the system continues to cycle the water and adjust, I refilled the Humidifiers, I top fed #1 since the roots are still not in the water, 2/23/2024 - Vegetation Week 1 Day 7- Still have to Top Feed #1 no roots in the water, however she is still progressing nicely slower than her sisters with roots in the water but still going strong.

This phenotype #4 was removed from the grow tent after 2 weeks of veg due to a deficiency I'd never seen before. From what I've researched, it could be sulfur; it didn't seem to be a disease, but it produced excessive resin.

1.2m x 1.2m tent Kind l600 led

First few days of flower so nothing much happening. The stretch is in effect and she's going for it. Just a little of the bottom leaves removed for better air flow. Nothing major. Having issues keeping the R.H around 60%· Observed slight water condensation on leaves at lights on. Need to sort that out

What a fantastic grow, this has now overtaken another plant thst was started 2 weeks before this F1, the growth on this plant is phenomenal !! Buds look like they have started to form nicely, as this is an auto i have taken to try and tuck levlaves in to open more light to buds below as I do not want to defoliate being an auto. Still amazed at the speed of this strain and already looking forward to next week's update for you all. 🌱

The seeds have germinated after around 59 hours to be exact very strongly I started to germinate the seeds on January 12th however it was 00:00 Am so it's almost like saying January 13th, the 2 out of 2 seeds have germinated very well without any problem! Quick germination, let's go for it! Stay tuned, this is a strain I love for her absolutely amazing terp profile!! Don't miss it👨‍🌾💚🔝♥️💛

I took the tiny plant out of the tent due to state laws. She is happily sitting in a window... we'll see what happens with her! Massive growth for both plants this week! They both doubled in size! I don't know whether to call my plants vegging, pre-flowering or flowering. I figured this was the last week of veg and next week is full on flowering!! They both stink! Gassy for sure! I'll need to turn start using my carbon filter soon... I caught a few cool time lapse videos this week. Especially after feeding them last night!! I fed them twice this week. The first time was at a third recommended dose and I jumped it to half yesterday. The leaves are clawing at the top of the plants... I think it is a lack of phosphorus due to me only watering them the last 2 weeks. Any thoughts out there? I'd love advice about defoliating... I have a couple massive fan leaves I could remove to open the canopy for flowers... I just don't want to stunt the plant or rob the main cola of a major energy source... Thoughts are definitely welcome! I tried my hand at LST... I think a few are working and a few aren't doing the job... Definitely need to figure this out! Again advice is welcome! If you've made it this far... thanks!! Cheers!

Hey Leute ich hab bei den Pflanzen Ungeziefer bemerkt kann nur aus der plagron Erde vom Grow Shop sein Trauermücken thripse bei zwei Pflanzen außert sich das Schon negativ die Pflanze sieht kränklich aus gelb Stich von oben nach unten überdüngung ausgeschlossen, hab die Pflanzen mit combo neem behandelt 4 Tage gewartet und wieder behandelt das Pflanzbild der Zustand kann auch davon kommen !!! sobald die Pflanzen sich erholt haben schick ich die endlich in die Blüte

My first grow ,I started with a HPS 600 double ended light Lumatec and at the beginning I knew that summer ☀️ is coming and that I'll have to change to LED , Fighting to keep my temperature and humidity at the right range .I made a decision to go with 20 / 4 light cycle.

# La germination c'est bien passé la graine était foncée et tigrée. Elle a sortit son germe dans le verre d'eau et c'est enraciné en +/-96h avec un petit peu d'aide. 💯 Jusqu'à présent Zamnezia seeds 🌱🌱🌱 # 08/14: zamnezia ma fait cadeau de 3x3 graines pour essayer leurs variétés. Donc un grand merci à zamnezia ! Je n'ai mit que une graine de GSC auto zamnezia seed à germer aujourd'hui pour ce qui est de la méthode de culture j'hésite encore car je viens d'acquérir un waterfarmer de chez GHE: un système par percolation. Enfin j'ai +/- 5 jours pour me décider ! D'ailleurs si quelqu'un a des conseils à mes donner quand à l'utilisation d'un système hydroponique par percolation, je suis preneur ! Great day at the growdiaries.com communauté 🌞🌱🌱🌱🌞 À peine à 7 heures après l'avoir mise dans le verre d'eau que la voilà déjà au fond du verre d'eau. 💦🌞🌱😜 08/15: depuis 24h dans le verre d'eau Hr: 70% T°: 23°C et toujours rien aucun germe, l'effet loupe du vere ma permit de voir que la graine s'ouvrait comme un moule, le germe devrait pas tarder à sortir. normalement d'ici 24h le germe devrait être apparent. normalement je met +/- 5 jours pour faire germer une graine! j'hésite encore quand à l'utilisation du waterfarmer car je doit tamponé les billes d'argiles aisi que que le rockwool chose que je n'avais pas anticipé, pour le rockwool ça semble plutôt simple: trempé 24 h dans une solution ayant un ph entre 5.5 et 6 pendant +/-48 heureus (merde j'ai oublié d'ajouter du root juice et du canna start à ma solution). Pour les billes d'argilles ça deviend plus compliqué faut les nettoyer et les tamponer meme celle de chez plagron (je suis très étoner qu'ils n'aient pas tamponés eux même leurs billes destinés à de l'hydroponique. en faisant deux trois recherche j'ai trouver des billes déjà nétoyer ayant un ph bas mais pas précisé sois disant près à l'emplois. on verra ça demain à l'arrivé du colis. dans tous les cas si je n'utilise pas le waterfarmer, j'utilserai un pot en geo-textile de 15L (lightmix/coco/perlite/humusLombric/guano/trichodermas) 3 portions de lightmix pour une de coco et d'humus, le reste lire la notice :D 23:03: je vois le radicule sortir fébrilement grâce au verre "nutela" 😂 qui ont un fond qui à un effet loupe , le waterfarmer sera pour le prochain plant :(, lesson a retenir, se documenter avant de faire quoique soit! 08/16: la graine à germer 💚 et la graine s'entre-ouvrait je voyais le vert/blanc des cotelydons dans l'ouverture. Je l'ai directement planter dans sont pot de 15L. 08/17: no news. Patience les amis 💂‍♂️💂‍♂️🌞 08/19: la voilà qui arrive fébrilement ✌️. D'ici ce soir elle devrait être droite ou presque :)#1