Grow Diary – Day 76 (Flowering Day 61) Strain: Amnesia Core Cut (Clone) Training: Topping, LST, HST, SCROG Nutrients: • Aptus Regulator: 0.1 ml/L • CalMag: 1 ml/L • BioBloom (Dry Amendment): 60 g (applied June 26) Water: pH-adjusted RO water (final flush phase) Lighting: LED at 60% Date: August 10 ⸻ Status: Forced Harvest – Pest Pressure Too High Today marks the end of the cycle for this Amnesia Core Cut—Flower Day 61. While buds are well-developed and aromatic, pest pressure from thrips and aphids reached a level that would likely destroy the plant if left for another 2–3 weeks. To preserve quality and prevent further spread, the decision was made to harvest early and clear the space for the next run. ⸻ Harvest Condition: • Buds dense and covered in cloudy trichomes with ~15–20% amber • Aroma at peak—intense citrus-haze with earthy undertones • Sugar leaves showing late-stage fade, fan leaves largely yellowed • No visible bud rot despite pest presence • Damage from pests mostly on foliage, minimal on buds themselves ⸻ Reason for Early Harvest: • Rapid increase in thrips and aphid populations • Risk of pest spread to other plants in the grow space • Plant already in late senescence; continued flowering would add minimal weight but increase risk significantly ⸻ Post-Harvest Plan: 1. Drying in a controlled 18–20 °C, 50% RH environment with steady airflow 2. Cleaning & sanitizing grow space to remove pests before introducing new plants 3. Inspection & culling of any nearby plants showing early pest signs 4. Planning next run with improved IPM (integrated pest management) from day one ⸻ Closing Notes: While an early harvest is never ideal, the quality of the buds at this point is still high, and the loss in yield is offset by saving the rest of the grow space from a full infestation. This run provided valuable insights into pest prevention timing and senescence management in the Amnesia Core Cut.

..

9/17 Didn't know this was a new week or I would've taken more pictures. I'm glad I took those two plants. As it dries and I start to trim I could see where it could've turned to rot real easy. It rained enough last night to soak all the girls. The two bottoms I harvest look like the have pm on them. If so I'll wash it or through it in the concentrate bag. Found a few colas a dropped which will go in the concentrate bag. Scoping the toasted toffy and the event horizon and the both look AMAZING! I've scoped the others and I'm extremely impressed. They may be difficult to grow strains but they have high cannabinoid content. The sherb cream pie has really come to life and turned totally purple with beautiful flowers. The girl in the 50 has several soda can sized buds. I hope this weather holds up. I don't like flowers this size getting wet. The sativa leaning hydrid us the only one I may have trouble with. It's only in a 10 gal but it's enormous! If needed I coyld bring it inside at night. The buds look like cat tails. I'm used to growing indica dominant strains. Plant us super healthy though. I'll be intrigued jail for a while and I've gotta make contact with whoever is going to do my extracts. I'll keep this updated. It's a lot of work bur it's worth it. 9/18 WATERED EVERYTHING I GALLON BUT THE BOTTOMS OF THE 2ND EV AND THE TT WHICH EACH GOT A HALF. Since harvest I've noticed some pm spring up on the toasted toffy. Looking at the other event horizon through a scope the trichs are all milky with some amber. I'm just waiting for A LITTLE more amber. And for me to have time and or room. I decided to harvest the tops and majority of one of my event horizon and toasted toffy. Today during an inspection I found a couple grey mold branches and some botrytis on my big GMO on the back. This plant is done. It's by far the furyhest ahead. Septoria effected the yield a little but pistols were retracted and amber was at like 10%. I thought about it and I watched the plant next to it with the pm have a branch I supported just "slough off". Right in my face. I figured if there was a sign tjis was it. I cut that rot off and put the buds from the branch in a bag and froze them then I went around and harvested the limbs on the other plant that were furyhest along. I took about half of it. I could've taken more and maybe I should've but I'm tired. I also noticed a couple spots of grey mold on the plant in the 50. All the leaves were falling off. I finally scoped it and it was right whetr I wanted it to be. Looking at the colors I'm glad I spent so much time the past few days. That one I hung whole. The sherb cream pie has something eating the fresy shoots (probably ear wigs. But the buds are fattening and the trichs aren't quite there. I'm going to let the rest of this stuff go ad long as possible. With the exception of the other event horizon. I finally tried it. It's fucking killer. I could take that plant now. The only reason I'm not is because I have to much work on my husband's as is. I'll do some videos amd pictures but I'm tired as fuck. Got to try event horizon. Very fucking impressed! 9/19 The past 3 days I've been working 5 a.m. to dark. I went back and harvested the bottoms of the toasted toffy and event horizon 1. After injury from harvest they contracted wpm. I used this as a learning experience and put some away in the freezer for concentrates and used a peroxide and water bucket. That's what kills the p.m. anyway. I hung them and they spun in the wind. I blew them lightly with a leaf blower before putting them ok strings I had previously setup with a fan in front of it. I kicked ass today. Toasted toffy got sampled and did NOT disappoint. I had it in a jar though and it was green so I'm not counting this. I do have some dry. I have indoor left too. Like in the video that one GMO looks like it's fucking dying or something. I'd rather cut it and use it for concentrates if it effects my healthy plants. I just checked on that plant in the 50 I hung. It looks amazing under the scope and smells better. Decisions, decisions. I do have a few calls I should make sooner rather than later. We are supposed to be getting rain. 9/20 The past 3 days have been hard. The wife's medical stuff is acting up and I had to tend to harvesting a few. My whole body hurts. I even did my first bud wash yesterday! The ev and tt I took and left some buds on ended up covered in pm. So I decided fuck it and tried bud washing. I also froze some for extracts. Speaking of which I need to male contact with whoever I'm going with this year because I think I've reached the point of diminishing returns on that dieing GMO. When it comes to grey mold and botrytis I don't fuck around. Winds are really high today. Putting the scope to the sherb pie is making me second guess myself too. Oh well. It's not going to rain today. And if needed I can move them in the barn. If I get ahold of Mt processor I'll chop that GMO and bring it right there. The other thing is that I've got tons of weed and a lot of its hanging so I've gotta find someone that will do a batch of live rosin then like a elbow of dry. This is the best part of the year. We'll It's supposed to be. Cutting down good plants us bittersweet. I don't mind chopping that one gmo a little early though because it's close to hitting the point of no return. That little sativa dominant hybrid in the ten is HUGE! The buds are swelling like crazy too. It's got a COUPLE septoria spots but this thing is resilient and easy to move around. This will finish perfectly. So far I'm happy with what I have. I'm GRATEFUL. The two September plants I tried were GREAT. A 90/10 and an 80/20 and they both suprised me and got me exactly whete I wanted to be. I'll keep things updated. I did a video I'll upload. 9/21 Weather is still great and the buds don't even seem wet in the morning. The thing is is that something (rot or ear wigs probably both) have stripped lower interior branches. In some cases stripping them ENTIRELY or chewing the stem right off. It wasnt happening to my favorite GMO or the one in the 30 and the like on in the ten. The Sherb pie I noticed grey mold on 3 different branches. Last time I checked trichs it wasn't ready but I've got to get a handle on this mold/pests or it's going to he taken a little early. We have incliment weather coming Wednesday I think. I'll bring the 10 inside and if I have to I'll bring that perfect GMO in as well. I'm going to scope everything again today. I called a bunch of extractors for prices. I was going to do fresh rosin and just yank and drive but that is looking to be harder. I can get badder made CHEAP from a reputable lab. I think I'll do that. They prefer dry and that way I could through what's left from last year in there. I have this other one GMO that I've had the same issues with. I'm sick of removing bud rot or having to cut interior branches off due to pm. Tried toasted toffy and it was fucking amazing. I'm planning on trimmingvthe ev and if I finish I can bring the other one in. It's done. It's not getting any bigger. Trichs aren't changing. That GMO I am going to scope when I get home and it will be coming down in the next couple days. Otherwise I'll end up with half of what's there. The GMO I took the tops from is finishing up too. If I scope that and it looks decent and I have the time I'll take the remainder. I'm leaning towards doing at least a lb dry for extracts. I've got some frozen. I've got some hanging and most is still in the ground. I sleep on all major decisions. However, I know getting my nice buds soaked when I'm already losing shit to budrot and grey mold isn't the smartest thing. I'll probably take what I can and bring the others inside to keep them safe. I didn't think I'd have this much quantity. I knew quality would be good but this isn't a bad year quantity wise either. I'll keep this updated. 9/22 Busy as hell! Rain coming Tuesday. After a final check of the scope and the flowers and I took the GMO that all the leaves had fallen off of. That plant is going straight to extracts with the one in the thirty. I also "finished" harvesting that GMO that was furthest along. Trichs were getting amber. Been in trim jail. Was going to take the Sherb Pie but I'm not seeing amber yet. I did have to cut off some branches that had rotted. I'll keep an eye on it. It will come down when it's ready. It just sucks losing little bits of it. My favorite GMO is sooooo close to perfect. I should just take it but I'll wait. If we get rain I'll bring that and the sativa looking one in the ten is the barn. Back to work now. Before I forget what strain is what lol. 9/23 Still busy as fuck. I chopped the other event horizon amd hung it whole. It's DONE and it doesn't need to go through the rain storm. I also took the majority of the GMO early pheno. What's left will get plucked off and used for extracts. The big one in the 50 is getting dry. I have finished the event horizon and I'm not "finished" with the toasted toffy but I have it in 5 gal buckets with a food grade lid so u can at least cure correctly. The gmo is still hanging. I'm wondering whether I should wait it out or chop. I'm gonna take care of what I have inside first and hope that shit doesn't eat my plants or that it doesn't rot off. That perfect GMO has one branch with some grey mold. I might cut it off. I'll keep this

📆 Semana 4 El stretch llega a su fin y la floración avanza con rapidez. Los cogollos comienzan a ganar volumen en todas las puntas y las flores empiezan a unirse a lo largo de las ramas, formando colas cada vez más definidas. La estructura se mantiene uniforme y aprovecha al máximo la luz disponible. El consumo de agua y nutrientes alcanza uno de los puntos más altos del cultivo. El amarilleo de las hojas bajas continúa de forma progresiva mientras la planta prioriza el desarrollo floral y la producción de resina. ⚡ EC: 1.7–1.8 💧 pH: 6.2–6.5 🌡️ Agua: 21°C 🌫️ Humedad: 45–50% 💡 Intensidad: 1000–1100 PPFD 🔥 Nota de cultivo: Semana de máxima actividad floral y elevado consumo nutricional. Mantener el equilibrio del riego y la alimentación permitirá un engorde continuo y homogéneo. ¡Seguimos creciendo fuerte 💪!

Nachdem ich ja einige Probleme mit dem pH-Wert hatte, läuft es jetzt super. Die Spitzen der Blätter sind mir etwas zu braun, grundsätzlich strebe ich aber leicht "lackierte Nägel" an. Sonst gibt es nicht viel zu sagen, läuft.

Lots and lots of tops. Spider mites, I sprayed everything in the greenhouse.

Comenzamos su 2° semana de vegetación y 3°de vida y lo hacemos con mucha fuerza 💪🏻 😃 Hemos realizado su 1er transplante a una maceta de 7L para que siga desarrollandose y terminar en una de 15L 💪 Tambien empezamos aplicar los primeros nutrientes para vegetación y vamos reduciendo suavemente los de germinación para que no sufra estrés 😁

Not much water just a drizzle and she seems to be doing better this week. She is only about 10 cm but she looks like she’s co

It’s like a Tornado just passed by! Sundae Driver packing that final weight. Super stoked for this grow!

Vamos familia, actualizo la sexta semana de floración de estas Royal Gorilla de RoyalQueenSeeds. Vaya color más bonito, se les ve sanas, están formándose las flores bastante bien. Y desprenden ya un aroma increíble. Alguna se adelantó en la floración intentaré cortarlas todas a la vez pero ya veremos cómo progresa. Hasta aquí todo bien el único suplicio que sufro son altas temperaturas por estar en pleno verano. Acabaré este proyecto y daremos parón unas semanas. Que avance algo más el verano. Máximas de 29 y mínimas de 26 ahora viene el calor y ando jodido en humedad ronda el 40%. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Hasta aquí es todo , espero que lo disfrutéis, buenos humos 💨💨

Prepared 9 , 5 gallon fabric pots. Started presoak of beans at noon on August 31st. About 4 hrs then switch to pure water for 8 more hours. Around midnight switch to paper towel and plates. Set heat pad @86°. Prep solo cups with Light Warrior ff, on the 2nd of September check tails and plant in solos. Wet solos the day before and start heating them up on the mat in domes. After seeds pop in solos wet the center of 5gal pots until runoff and start heating main tent with the big pots in it. Transplant seedlingson or around September 7th. I'll try to remember to post a germination pic. I use rain water with 5ml calmag per gal with a ph 6.0-6.5 no adjustment to the ph is needed. That's how I water throughout the grow, unless I see a deficiency that needs immediate attention. Soil is a mixture of Fox Farm soils , I added pumice, perlite, peat, moss, ewc, compost, guano, langbeinite, dietamacieous earth and dry fertilizers like Dr EARTH Bud and Bloom, or Pennington tomato. Installing bamboo frames for LST. I'll LST and top once usually. Manifolding is fun but takes an extra 2 weeks for me so I have started to avoid tall strains. I've grown Wedding Cake a few times, also Chemdog and Gelato, but the N. Lights and Peyote WiFi are gonna be a new experience. No idea what PW will be, they were freebies won in the Seedsman 4-20 contest 2021. Pretty sure the Northern lights will be similar in size to wedding cake. It will all get sorted out over the next 7 weeks. Ill move them around until a conopy looks good. That 2x4 tent is mainly for germinating seedlings and drying harvest but can also be useful for overfolw or quarantine. The 4x4 is taller plants. The 3x5 with that vioer spectra 480w light is bad ass but does have limits on total plant height, really really strong light.Alright that's it, I'm back with no name or gender changes, had some success and failure here before, I expect that trend to continue.I'll be checking your darlings out. 8/2 added a few more beans to the paper towels. These old beans from GOG seem to be bad, probably due to the factory seed pack. They are blister packs with plain card board backing, the plastic is heavy butvonly on the top for protection from crushing. Obviously not good for storage , so much for trying to maintain humidity. Added six more chemdog millionaire and 4 more Northern Lights beans to the paper towel for germination last night so far all these chemdogs and northern lights haven't germinated. The wedding cakes spouted then died before the tails were a quarter inch long. I've never had so many fail. This is gonna take a while but I'll eventually find some beans that aren't full of dust. Garden of Green love ya but this is bad. Update September 7th I've added- 3 Black Sugars, 6 White Widows, 5 Hellfire OG, all failed they are just dry husk that sink and stay on the bottom of a glass with water. Out of 60 or so seeds I think 6 germinated and 4 actually became seedlings. Stating over with. 5 Seedsman Gelat OG feminized and 5 Seedsman Amnesia FAST feminized pre soaked last night then started paper towel method at 5am today. Still have 5 of 9 pots that are empty. What a fucking ordeal.im just gonna continue with what is up already and say day 1 was Sept 12. That's close enough for this mess.

New week for the 3th grow It's getting along very nicely must say one is looking better then the other and it's mix bags of sizes to worry about but other then that no troublesome issues what so every Next week going to lower the nutrients and be going into overdrive for next 2 weeks and probably be flushing some after 3 weeks Happy growings Growmies 🤜🏻 🤛🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Day 51 omg the smells she stinks so sweet straight like bubblegum. I’m stoked for her. She really started off slower and it just goes to show you even the turtle can win the race. Just a beautiful spread of leaves and buds and nice dense frosty goodness. Really happy with her.

As you can see this girl has been cleaned up, it was frustratingly to see her try to sort herself out after going into revegetation and we were not sure how long it would take. At one point we thought about cutting her down but we decided to give her another chance and it is safe to say that she appreciated the time that was spent on her. A little bit of love can go a very long way, it has been about a week since the clean up and she has already gone into flower again. The watering is happening twice a day and the feeding is once a week, a good tasty tea has been shared once a week also. This girl seems to have a good ability to fight off the mildew and we hope to keep the pests away! At the moment this girl seems to be free of any issues and we are pleased that we have kept her growing.

I am posting this on day 20 of flower. Stretching seems to have slowed dramatically. Getting some great buds forming. Drinking about 7 gallons a day. Everybody is happy! I supercropped maybe 10 shoots that were too eager, and now the canopy is nice and even. A little taller than I planned for the scrog, but it should work out well.

Ho praticato il lollipopping per cercare di traferire le energia solo in alcune parti e sembra andare benissimo. la prossima settimana pubblichero delle foto pazzesche sicuramente.

Day 15: 👍🏾 Note: Plant closer to plant slower growth than the other. Day 18: 👍🏾 Day 21: 👍🏾 Note: Electric out for 2 days due to bad storm therefore plants are on balcony. They love their natural habitat.