9/17 Didn't know this was a new week or I would've taken more pictures. I'm glad I took those two plants. As it dries and I start to trim I could see where it could've turned to rot real easy. It rained enough last night to soak all the girls. The two bottoms I harvest look like the have pm on them. If so I'll wash it or through it in the concentrate bag. Found a few colas a dropped which will go in the concentrate bag. Scoping the toasted toffy and the event horizon and the both look AMAZING! I've scoped the others and I'm extremely impressed. They may be difficult to grow strains but they have high cannabinoid content. The sherb cream pie has really come to life and turned totally purple with beautiful flowers. The girl in the 50 has several soda can sized buds. I hope this weather holds up. I don't like flowers this size getting wet. The sativa leaning hydrid us the only one I may have trouble with. It's only in a 10 gal but it's enormous! If needed I coyld bring it inside at night. The buds look like cat tails. I'm used to growing indica dominant strains. Plant us super healthy though. I'll be intrigued jail for a while and I've gotta make contact with whoever is going to do my extracts. I'll keep this updated. It's a lot of work bur it's worth it. 9/18 WATERED EVERYTHING I GALLON BUT THE BOTTOMS OF THE 2ND EV AND THE TT WHICH EACH GOT A HALF. Since harvest I've noticed some pm spring up on the toasted toffy. Looking at the other event horizon through a scope the trichs are all milky with some amber. I'm just waiting for A LITTLE more amber. And for me to have time and or room. I decided to harvest the tops and majority of one of my event horizon and toasted toffy. Today during an inspection I found a couple grey mold branches and some botrytis on my big GMO on the back. This plant is done. It's by far the furyhest ahead. Septoria effected the yield a little but pistols were retracted and amber was at like 10%. I thought about it and I watched the plant next to it with the pm have a branch I supported just "slough off". Right in my face. I figured if there was a sign tjis was it. I cut that rot off and put the buds from the branch in a bag and froze them then I went around and harvested the limbs on the other plant that were furyhest along. I took about half of it. I could've taken more and maybe I should've but I'm tired. I also noticed a couple spots of grey mold on the plant in the 50. All the leaves were falling off. I finally scoped it and it was right whetr I wanted it to be. Looking at the colors I'm glad I spent so much time the past few days. That one I hung whole. The sherb cream pie has something eating the fresy shoots (probably ear wigs. But the buds are fattening and the trichs aren't quite there. I'm going to let the rest of this stuff go ad long as possible. With the exception of the other event horizon. I finally tried it. It's fucking killer. I could take that plant now. The only reason I'm not is because I have to much work on my husband's as is. I'll do some videos amd pictures but I'm tired as fuck. Got to try event horizon. Very fucking impressed! 9/19 The past 3 days I've been working 5 a.m. to dark. I went back and harvested the bottoms of the toasted toffy and event horizon 1. After injury from harvest they contracted wpm. I used this as a learning experience and put some away in the freezer for concentrates and used a peroxide and water bucket. That's what kills the p.m. anyway. I hung them and they spun in the wind. I blew them lightly with a leaf blower before putting them ok strings I had previously setup with a fan in front of it. I kicked ass today. Toasted toffy got sampled and did NOT disappoint. I had it in a jar though and it was green so I'm not counting this. I do have some dry. I have indoor left too. Like in the video that one GMO looks like it's fucking dying or something. I'd rather cut it and use it for concentrates if it effects my healthy plants. I just checked on that plant in the 50 I hung. It looks amazing under the scope and smells better. Decisions, decisions. I do have a few calls I should make sooner rather than later. We are supposed to be getting rain. 9/20 The past 3 days have been hard. The wife's medical stuff is acting up and I had to tend to harvesting a few. My whole body hurts. I even did my first bud wash yesterday! The ev and tt I took and left some buds on ended up covered in pm. So I decided fuck it and tried bud washing. I also froze some for extracts. Speaking of which I need to male contact with whoever I'm going with this year because I think I've reached the point of diminishing returns on that dieing GMO. When it comes to grey mold and botrytis I don't fuck around. Winds are really high today. Putting the scope to the sherb pie is making me second guess myself too. Oh well. It's not going to rain today. And if needed I can move them in the barn. If I get ahold of Mt processor I'll chop that GMO and bring it right there. The other thing is that I've got tons of weed and a lot of its hanging so I've gotta find someone that will do a batch of live rosin then like a elbow of dry. This is the best part of the year. We'll It's supposed to be. Cutting down good plants us bittersweet. I don't mind chopping that one gmo a little early though because it's close to hitting the point of no return. That little sativa dominant hybrid in the ten is HUGE! The buds are swelling like crazy too. It's got a COUPLE septoria spots but this thing is resilient and easy to move around. This will finish perfectly. So far I'm happy with what I have. I'm GRATEFUL. The two September plants I tried were GREAT. A 90/10 and an 80/20 and they both suprised me and got me exactly whete I wanted to be. I'll keep things updated. I did a video I'll upload. 9/21 Weather is still great and the buds don't even seem wet in the morning. The thing is is that something (rot or ear wigs probably both) have stripped lower interior branches. In some cases stripping them ENTIRELY or chewing the stem right off. It wasnt happening to my favorite GMO or the one in the 30 and the like on in the ten. The Sherb pie I noticed grey mold on 3 different branches. Last time I checked trichs it wasn't ready but I've got to get a handle on this mold/pests or it's going to he taken a little early. We have incliment weather coming Wednesday I think. I'll bring the 10 inside and if I have to I'll bring that perfect GMO in as well. I'm going to scope everything again today. I called a bunch of extractors for prices. I was going to do fresh rosin and just yank and drive but that is looking to be harder. I can get badder made CHEAP from a reputable lab. I think I'll do that. They prefer dry and that way I could through what's left from last year in there. I have this other one GMO that I've had the same issues with. I'm sick of removing bud rot or having to cut interior branches off due to pm. Tried toasted toffy and it was fucking amazing. I'm planning on trimmingvthe ev and if I finish I can bring the other one in. It's done. It's not getting any bigger. Trichs aren't changing. That GMO I am going to scope when I get home and it will be coming down in the next couple days. Otherwise I'll end up with half of what's there. The GMO I took the tops from is finishing up too. If I scope that and it looks decent and I have the time I'll take the remainder. I'm leaning towards doing at least a lb dry for extracts. I've got some frozen. I've got some hanging and most is still in the ground. I sleep on all major decisions. However, I know getting my nice buds soaked when I'm already losing shit to budrot and grey mold isn't the smartest thing. I'll probably take what I can and bring the others inside to keep them safe. I didn't think I'd have this much quantity. I knew quality would be good but this isn't a bad year quantity wise either. I'll keep this updated. 9/22 Busy as hell! Rain coming Tuesday. After a final check of the scope and the flowers and I took the GMO that all the leaves had fallen off of. That plant is going straight to extracts with the one in the thirty. I also "finished" harvesting that GMO that was furthest along. Trichs were getting amber. Been in trim jail. Was going to take the Sherb Pie but I'm not seeing amber yet. I did have to cut off some branches that had rotted. I'll keep an eye on it. It will come down when it's ready. It just sucks losing little bits of it. My favorite GMO is sooooo close to perfect. I should just take it but I'll wait. If we get rain I'll bring that and the sativa looking one in the ten is the barn. Back to work now. Before I forget what strain is what lol. 9/23 Still busy as fuck. I chopped the other event horizon amd hung it whole. It's DONE and it doesn't need to go through the rain storm. I also took the majority of the GMO early pheno. What's left will get plucked off and used for extracts. The big one in the 50 is getting dry. I have finished the event horizon and I'm not "finished" with the toasted toffy but I have it in 5 gal buckets with a food grade lid so u can at least cure correctly. The gmo is still hanging. I'm wondering whether I should wait it out or chop. I'm gonna take care of what I have inside first and hope that shit doesn't eat my plants or that it doesn't rot off. That perfect GMO has one branch with some grey mold. I might cut it off. I'll keep this

Jelly cak3 I can’t wait. She smells dank and look great. I can’t wait. Jelly cak3 smells more like fruity cak3. I smell grape I smell berries I smell cherries I can’t wait jelly cak3

Pasados unos días del transplante seguimos con la actualización de los seguimientos de las variedades green gelato de RQS. Cambiamos el sistema de iluminación de hps a Spectrum board de #heavengrowligths.

A good first week overall. Couldn't be with them all the time so there was a day they got too much humidity. Some of the girls droopped because of this. A couple may not recover. But we'll see. Lights at 40% power. Here are the lights details: Medic Grow Mini Sun-2 150W LED Model: MN150-022 Spectrum mode: V1 Efficacy: 2.8 umol/J Thanks for stopping by! You can find the light on Grow Diaries: https://growdiaries.com/grow-lights/medic-grow/mini-sun-2-150-watts You can find the light on Medic Grow's website: https://medicgrow.com/

Top with new soil and recharged

Placed seed in water for 18 hours and then planted into a small pot , 24 hours after that we have action . Just water for a few days and maintaining high humidity.

Week 6 went pretty well, +30 during the day, +23 at night, a few yellowed leaves, next time I water her I will give her Espom salt so that she absorbs more magnesium, despite the high heat everything else looks good :) good luck to everyone.

Getting close to harvest #1 (#2 is already curing)! The pistils are still mostly white and stretching but some trichomes are starting to turn amber - I'll give it another few days or maybe a week. For the last two weeks I have just been feeding just water with no nutrients.

We are nearing the end of this journey with the 5 White Widow Autoflowers from ILGM genetics During week 12 Continued watering with regular PH'd water every 2 to 3 days. Checking tricomes with a jewelers loop every few days. The plants are smelling super potent now coming into week 8 of flower! Buds are super resinous and extremely sticky. Week 13 Last week before chop! The plan is to see how the plants look nearing the end of week 13. My current grow tent is the same tent I use to dry so this may get tricky! ILGM has grow time listed as between 10-14 weeks so Im right in that final phase. Stay tuned for up close shots of the final stage of these plants. I will include final photos, wet weight, and final dry yield in upcoming posts. 👽

The start of this week marks 8 weeks since flower. That tall one in the back has spent the entire grow being a lighter color, then losing much of it, and now any green that comes back gets immediately swapped out for red. Not sure what I did to this one early on but its been lighter colored and stretchier the entire time.

We are currently working on the recovery from the initial stem split on plant A. She's almost all the way recovered with only a slight crack still remaining. Hopefully that split and the overwatering won't disrupt or stunt the growth of this lady too much. For the sake of experimenting I pulled off the first set of fan leaves that were stunted and discolored in hopes the energy used by the plant will be directed more towards the new growth. Plant C is looking great and loving the increased Par values from our light as we are getting good vertical growth and the main stem is looking super healthy. As we get through to the end of the week we will start transitioning plant A for LST in the form of tie down. The fan is currently applying pretty good stress to the already week stalk of plant A, but she again is almost 100% closed back up. The whole purpose of the fan is to strengthen the stalk with very light stress. Plant C will see LST beginning in 2 weeks as she is 1 week behind Plant A. Many people ask me about the LL on the guage and I will remind everyone, I live in a high climate desert around the 49th parallel so it's cold and dry. When the tent is closed I usually see rh values near 40% where the normal RH (Relative Humidity) is around 10%. It's just dry here. That said the grow community here and the quality of bud is top shelf as it gets. Rh doesn't necessarily impact the end results. End goal is still 360g harvest out of this tent we will see if we get it.

This time I trimmed before drying. The buds are very nice and dense. This grow was very quick and satisfying. I expected more grams but I am still a newbie, I have a lot to learn. I cured it for 2 weeks and the taste is "mama mia". Thank You for letting me participate to this contest !

One of the tarte tatins is getting too big, really. This requires me to raise all the other pots to try to keep the same height. That's the game...👌 I tell myself that I should have cut the apex of it, but I think it's too late now , what do you think? 🤔 ( currently on the 17th day of flowering) This week I'm adding my carbon filter to my extractor, to remove the smell of plants outside the tent I try to raise the plants to the same height with upside down plastic pots. I'm also trying to place a fan under the canopy this week but I'm going to remove it quickly, it takes up too much space Busy week in defoliation✂️ ------------------------------------------------------------ 💧Watering I water all my pots the same day but with more or less water. Simply by lifting them; A light pot is a dry pot and will need more water, A heavy pot is a wet pot and will need less water. On average I water each pot with: Day 36 : 0.75 Liters Day 40 : 0.75 L I use tap water, adjust the ph to around 6 and water 💧Spraying I mix a little black soap and neem oil in 1L of water and spray everything in the tent just before my lights go out, keeping any electrical appliances away while I spray. I try to soak all the plants. and I repeat this 2 times this week and the next before the buds appear. I do this to keep pests away and reduce the risk of mold. ------------------------------------------------------------ 🔥❄️Temperature of the week : Day : 19-23°C (Humidity : 60-75%) Night : 15-18°C Outside the tent it is around 17°C with 70% humidity The humidity is a little too high, I hope it will drop a little and I won't have a problem with mold during flowering🤞 ------------------------------------------------------------ 🚀Equipment of the week ⭐️ : Light FC3000 Mars hydro. power 95% at 45cm Extractor 6 inch Mars Hydro + carbon filter . power 3/10. ON 24/24h 1 oscillating fan, on 45 minutes / off 15 minutes in loop (I reduce its use at night) ------------------------------------------------------------ 📜Links : Tarte Tatin seeds 🌱: https://shop.greenhouseseeds.nl/feminised-cannabis-seeds/tarte-tatin/ Mars Hydro : 5% off with my discount code "houstone5" 💪 https://www.mars-hydro.com/?acc=hou-stone 👨‍🚀My Instagram 🌱❤️️: https://www.instagram.com/hou_stone420/ ------------------------------------------------------------ ☮️Peace and love👊

BEGIN WEEK 13 - Day 85 - 1/15 - Day 38 into flowering. Fert Water 1+2 in 1.9 lit water. Day 86 - 1/16 - Day 39 into flowering. Plain pH'd Water. Day 87 - 1/17 - Day 40 into flowering. Plain pH'd Water light ~800ml. Day 88 - 1/18 - Day 41 into flowering. Fert Water 1+2 in 1.9 lit water. Measured pH & PPM for the first time - Plain Tap Water 7.5 pH & 50ppm. 4.5 pH & 340 ppm fert water solution. Should I be adding pH up to make it 6.2 ? Day 89 - 1/19 - Day 42 - 6 Weeks completed into flowering. 6.3pH water ~1.5 litre. Day 90 - 1/20 - Day 43 into flowering. Feed Fert Water 0.8ml/lit + 1.6ml/lit pH balanced to 6.3; 475 ppm. + 1 lit 6.2pH plain water; 50 ppm. Light suluf topping added. Check Soil pH 6.6ish Runoff pH 5.4 Runoff PPM 1900 Defloiated old, bad looking fan leaves & small popcorn buds. Day 91 - 1/21 - Day 44 into flowering. Plain 6.2pH water. END WEEK 13.

Gu Guys, she is continuing to develop as she should, however doesn't seem to be stretching all to much even with lower light intensities. I have therefore decided to push the ppfd to roughly 600 and let her finish her pre flower, no matter if she will fill the entire scrog or not. the roots are bit stained, however, this seems to be nutrient related, no slime or smelly roots thus far and it seems like she is constantly shooting out new ones from the net pot. She is going to be a nice little bonsai bush :)

Really loved this plant and how it grew other then the fox tails, Unfortunately I had to move this weekend and just couldn’t continue growing her and moving at the same time. She still had a good 1-2 weeks left but what is there looks really good will update when she finishes drying.

week intel: we reached the peak of flowering stage and need to cause a little more e.c stress from this week so e.c stress is twice a week i reduced the amount of Nitrogen and calcium and stopped feeding silicate in other hand i raised the amount of base nutrient and booster short story version: more K & P - less N stresses : a little E.C stress around 1 and 1.2 twice a week from this week feeding: i feed them 3 times this week with this order : day 1 : i feed them high with base nutrients(calcium & micros (half dose) + Bloom) about 566 ppm - 1.1 e.c to cause a little stress. day 3 : i feed them low dose of Top-Max + B-52 around 392 ppm - 0.7 e.c to let them recover a little but not fully recover still a little stress will caused. day 5 : i feed them high dose of Feeding Booster around 630 ppm - 1.2 e.c to cause e.c stress again guide of the week : e.c stress if done correctly is one of the very few ways to increase quality in all aspects ( color , aroma , taste , bud structure , resin contents ) but if you over do it , listen carefully brother : it can reduce quality in every aspect so always look for signs and never reach the red line

So it’s 33 days since germination! I’ve still got massive fan leafs in the space pot! All seem to be growing well! Is it time to switch to flowering mode now? What ph level do I need for flowering? Do I need to move my light closer than 2 feet away? Been looking online at canna coco nutrients and there seems to be so many! My babies as I call them now have come this far and I want to hopefully get the best results I can get!! Am I over feeding as giving them around 600/800 ml of water with canna coco a and b also cal mag! But unsure on when to feed during flowering mode any help is welcome cheers

So far there has been a learning curve.. I am learning both bloom and veg light should be on and I DEFINITELY learned about "stretching". I added more potting soil and straightened them gently so that they can be supported. I will monitor the girls through the week to see what effects changing the light to both bloom and veg have. Fingers crossed! Will update later in the week. Update 10.24.21 Corrected the stretching/bending issue and the girls seem to be growing pretty quickly now 😎😁